X58 Eclipse Sli with CMP12GX3M3A1600C9 how to make it run stable in 1600Hz?
Hello ,
I m new here, so forgive me if i make a mistake somewhere !
So my specs are :
motherboard: X58 Eclipse Sli(bios ver:1.F0 model:MS-7520)
CPU:i7 950 @ 3,07 (stock)
GPU: 2x GTX470(msi)
PSU:Thermaltake 1200watt
HD:1xSSD , 1xWD@10000rpm
and here is my story:
I have been using TR3X6G1600C9(corsair ver8.1) with XMP enabled so in 1600Hz and everything were going sweet stable pc , then i decided to put something more on it another TR3X6G1600C9(corsair) this time came different ver2.5 with XMP profile off seems work fine , with XMP on blue screen-restart so i asked in corsair forum they show a .pdf from corsair which was saying that mixing modules even with same kind of memory there are posibilities it wont be compatible-work.
Today i just replaced the 2xTR3X6G1600C9 with CMP12GX3M3A1600C9(corsair) enabled the XMP profile , everything was looking good all 12gb were working , but after some time i got blue screen and restart :(, so i bet this has to do with options and propably i have to do more than to enable XMP profile in order to make it stable. So any suggetions ? Yes i m totally noob from knowledge in bios only i know is to enable XMP but i m looking forward to learn stuff from ya guys and considering that i might just lost about 230e in order to upgrade ram and i can't make to work 12gb stable in 1600hz i should of ask much earlier!
Quote from: IcUfu on 19-May-11, 02:54:22
Hello ,
I m new here, so forgive me if i make a mistake somewhere !
So my specs are :
motherboard: X58 Eclipse Sli(bios ver:1.F0 model:MS-7520)
CPU:i7 950 @ 3,07 (stock)
GPU: 2x GTX470(msi)
PSU:Thermaltake 1200watt
HD:1xSSD , 1xWD@10000rpm
and here is my story:
I have been using TR3X6G1600C9(corsair ver8.1)(http://www.corsair.com/memory/xms-classic/xms3-ddr3-memory/tr3x6g1600c9.html) with XMP enabled so in 1600Hz and everything were going sweet stable pc , then i decided to put something more on it another TR3X6G1600C9(corsair) this time came different ver2.5 with XMP profile off seems work fine , with XMP on blue screen-restart so i asked in corsair forum they show a .pdf from corsair which was saying that mixing modules even with same kind of memory there are posibilities it wont be compatible-work.
Today i just replaced the 2xTR3X6G1600C9 with CMP12GX3M3A1600C9(corsair)( http://www.corsair.com/memory/dominator/dominator/cmp12gx3m3a1600c9.html) enabled the XMP profile , everything was looking good all 12gb were working , but after some time i got blue screen and restart :(, so i bet this has to do with options and propably i have to do more than to enable XMP profile in order to make it stable. So any suggetions ? Yes i m totally noob from knowledge in bios only i know is to enable XMP but i m looking forward to learn stuff from ya guys and considering that i might just lost about 230e in order to upgrade ram and i can't make to work 12gb stable in 1600hz i should of ask much earlier!
What i have done so far ,with CMP12GX3M3A1600C9 http://www.corsair.com/memory/dominator/dominator/cmp12gx3m3a1600c9.html
turned off XMP , put manually :1.DRAM freq-1600Hz 2. CAS timings 9-9-9-24 3.DRAM command rate 2N 4. DRAM Voltage 1.65 it did't crass again so far but i am afraid about this DRAM Voktage 1.65 is it posible that i will destroy my CPU this way??? The rest options in bios are setted to optimal defaults should i change something else in order to protect my CPU?
Similar Messages
-
MOVED: MSI X58 eclipse SLI CPU throttling problem
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=128074.0Quote from: goofazoid on 03-October-09, 15:03:29
If you turn EIST off you should be able to put the multiplier to a specific number between 12 and 21 (or higher if you have an unlocked Extreme CPU) and that is where it will stay.
I believe that is exactly what i did, i disabled EIST, C1E and set multiplier to 21, however, when i run a stability test(Prime95 or Linx) it always drops the multiplier down from 21x to 20x.
It seems to me turbo mode is still working when it is supposed to be disabled when you set multiplier to 21(or maybe it is just simply won't allow x21 multiplier to be used at full load anyway, turbo mode on or off).
Quote
Very good point Jack. There you go ravescar & others, give that a try & see if it makes a difference. smile
I experimented a bit with Overspeed Protection enabled and disabled, however i did not notice any difference in this regard, the multiplier still drops to 20 on high load for me.
However this problem do not happen if i set multiplier to 20, it is only the 21 multiplier that have this issue.
This is on a MSI X58 Eclipse SLI Motherboard + i7 920 D0 stepping + 6gb GSKILL Trident 16000 CL9 RAM.
Quote
BTW. I've read of a couple of cases where DO stepping 920's getting 22x with Turbo enabled but I'll remain skeptical regarding the validity.
Maybe it is just earlier version of cpu-z mis-reporting multiplier? -
Two questions re: X58 Eclipse SLI
Hi all -
two questions regarding my (admittedly older) X58 Eclipse SLI:
1.) When I built the system, I had two IDE DVD devices: one reader and one burner. I've since replaced the burner with a SATA burner but now I can't get Vista 64 to recognize the reader. I have the reader setup as 'Master' on the IDE bus and it does get identified when booting the system. Vista won't see it, though, even with the JMicron drivers installed.
2.) When I bought the board, I also bought an OCZ 1600 DDR3 kit (OCZ model# OCZ3P1600LV6GK). I FINALLY got the RAM stable at 1333MHz, but I've considered adding more RAM to the system. Am I likely to experience issues if all the RAM is not matched - especially considering I've had to customize the RAM voltage and timings?
any suggestions here would be greatly appreciated!
MikeQuote from: PirateDog on 20-April-11, 06:31:10
It may be possibe that a firmware update is available from the device manufacturer that will make the drive compatible with Vista?
Possible, however I doubt that's the issue considering that the drive functioned normally prior to the removal of the 2nd (SLAVE) drive. To clarify, when both drives were attached to the PATA controller everything worked fine. When I went to a single drive, the OS no longer recognizes the MASTER device. -
Eclipse SLI with Corsair TR3X3G1333C9 (OC Quesion)
Hi all,
Just starting out in trying to overclock and was windering what speeds people have managed to get on their rigs. Is there anyone out there that is using the board and memory (Eclipse SLI with Corsair TR3X3G1333C9 3x1GB).
- If there is anyone out there with the same hardware as me and has overclocked it.
- What speeds did you get and what setting did you use?
Thanks All,
HalvareHi halvare & welcome to the forum. An Admin. or Moderator will probably move your thread to the forum subject 'Overclockers & Modding Corner'. In the mean time, take a peak at the forum posting guide & other 'Sticky' topics to help with the details needed to provide the best answers for you. Provide a full list of system specs, as this will greatly increase the forum users ability to make recommendations. Use my signature below this post text as an example.
-
Cooking with iPad how to make screen stay on longer
Cooking with iPad how to make screen stay on longer
Try, settings - General - Auto Lock. Set to your preferred time.
Stedman -
How to make iMac run less hot when in Bootcamp?
When I play a game in win7 trough bootcamp, my iMac gets real hot.
How to make it run cooler?
It sounds like fans could be running faster; but I want it to do it automaticly.Download Lubbo Fancontrol for MacBook Pro to help with the fans.
Lubbo FanControl for MacBook Prohttp://sourceforge.net/projects/lubbofancontrol/
Also these
AIDA64 Extreme Editionhttp://www.aida64.com
http://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner -
I have downloaded OS X Mountain Lion from the App Store. It took two hours to download but now its not running and I have no idea how to make it run!
Download was complete and I accepted everything and restarted computer but its still running 10.7.5
Any idea how to get OS X Mountain Lion to run?What you donwloaded was the OS installer. You still have to do the installation.
To get started, double click on the download, then double click again and follow instructions. -
DVR with fms3 , how to make it work?
Hi
I am trying to look for documentation on how the DVR functionality is working in fms3. It seems that I need to implement som server-side scripting to make DVR even work. In Flash Live Encoder there is an option to Record DVR, but it when I press the button, all I get is:
Thu Apr 30 2009 13:15:38 : Start DVR command received
Thu Apr 30 2009 13:15:38 : Requested DVR command has been successfully issued to Primary FMS server for stream ob1stream
Thu Apr 30 2009 13:15:38 : Primary - Network Status: NetConnection.Call.Failed error Method not found (DVRSetStreamInfo).
Does anyone know how to make this work?
Best Regards Niclasok i'm back for a second......so uhhh....class is in session here is a basic example of a video encoder
use this to stream your video while recording.....what makes it record?and not live? this line here:
ns.publish("thefilename", "record");
the second parameter.....to make it stream live without recording it to file you change it to "live"....the first parameter is what you name your file...
after this you use your client player to connect to the same connection as outlined.....and to play the same file ..ie stream.play("thefilename");
package
import flash.display.*;
import flash.media.*;
import flash.net.*;
import flash.events.*;
public class SimpleEncoder extends Sprite
var nc:NetConnection;
var ns:NetStream;
var mic:Microphone;
var video:Video = new Video();
var camera:Camera;
public function SimpleEncoder():void
NetConnection.defaultObjectEncoding = 0;
nc = new NetConnection;
nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
nc.connect("rtmp://localhost/video/myvids");
private function publishLiveStream():void
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
ns.client = this;
camera = Camera.getCamera();
mic = Microphone.getMicrophone();
if (camera != null){
camera.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
video = new Video();
video.attachCamera(camera);
ns.attachCamera(camera);
if (mic != null) {
mic.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
ns.attachAudio(mic);
if (camera != null || mic != null)
// start publishing
// triggers NetStream.Publish.Start
// "thefilename" is the name of the file you use after you connect to stream in client player stream.play("thefilename");
ns.publish("thefilename", "record");
else
trace("Please check your camera and microphone");
addChild(video);
public function onBWDone():void
private function netStatusHandler(event:NetStatusEvent):void
trace(event.info.code);
switch (event.info.code)
case "NetStream.Buffer.Full":
break;
case "NetStream.Buffer.Empty":
break;
case "NetConnection.Connect.Success":
trace("Congratulations! you're connected");
publishLiveStream();
break;
case "NetConnection.Connect.Failed":
case "NetConnection.Connect.Rejected":
// trace ("Oops! the connection was rejected");
break;
case "NetStream.Play.Stop":
break;
case "NetStream.Play.StreamNotFound":
trace("The server could not find the stream you specified");
break;
case "NetStream.Publish.BadName":
break;
case "NetStream.Publish.Start":
private function statusHandler(event:StatusEvent):void {
trace("statusHandler: " + event);
trace(mic.activityLevel);
private function activityHandler(event:ActivityEvent):void
//trace(mic.activityLevel);
public function onFault(e:Object)
//trace(e.info);
//nc.close();
}//end class
}//end package
thelegendaryghost -
How to make WebLogic run as a service in Sun Solaris
I have a WebLogic Server 10.3.1 run on Solaris 10. I use oracle user to start WebLogic. But when I logout, the server also down. How to make it still run when user oracle logout the server or the session is disconected automaticly?
you can put the same command in .profile file (hidden file) .. when the user logs in .profile will be executed and so do your startup sommand.
-
How to make Robocopy run in the foreground using Scheduled Tasks
Hello everyone!
I am doing a daily backup using Robocopy and Scheduled Tasks running Windows 2012 Server. When it runs, robocopy runs in the background and does not write to log that I am pointing to. How can I make it run in the foreground? Also, is there anyway to write to log only those records that have been copied or purged? what are the best practices for robocopy use?
Here is the script:
date /t >> log.txt
time /t >> log.txt
ROBOCOPY \\CENTURY1\d$\ f:\ /MIR /R:0
time /t >> log.txt
This topic first appeared in the Spiceworks CommunityHello everyone!
I am doing a daily backup using Robocopy and Scheduled Tasks running Windows 2012 Server. When it runs, robocopy runs in the background and does not write to log that I am pointing to. How can I make it run in the foreground? Also, is there anyway to write to log only those records that have been copied or purged? what are the best practices for robocopy use?
Here is the script:
date /t >> log.txt
time /t >> log.txt
ROBOCOPY \\CENTURY1\d$\ f:\ /MIR /R:0
time /t >> log.txt
This topic first appeared in the Spiceworks Community -
How to make silverlight run on my mac
I have to download microsoft silverlight on my mac. Once I do how do I make it run?
Microsoft Silverlight IS a Plugin
If your iMac is an Intel iMac and running, at least OS X 10.5.7 then you can install this plugin.
If you are running OS X 10.5.7 on an older PowerPC iMac, Silverlight cannot be downloaded and won't work.
Are you using this plugin to view Netflix videos on your computer?
You just download it , it will automatically install itself and it works in the background within the web browsers listed in the page I have linked.
Here's the download link
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx -
MOVED: X58 Eclipse SLI temperatures
This topic has been moved to Intel Core I7 boards.
https://forum-en.msi.com/index.php?topic=122469.0IF your IOH Temps are INSANELY HOT like mine (up to 110-127 C!!), there might be something wrong with your Heatsink (the giant two-sided one with the copper pipe). Those plastic pushpins don't seem to hold the heatsink firmly to the two chips (I'm not sure which one is the IOH yet). Anyway, I tried using pushpins from other boards and using arctic silver thermal paste - no difference. BIOS 1.1 - no difference.
Finally, I decided to get a little bold and try using some screws to literally screw the heatsink down thru the existing holes into the MB - WARNING do this at your own risk!! I found some screws that were the diameter of the 4 holes on the heatpipe from the leftover screws that came from my antec case. I cleaned off the old heatsink material (lots of elbow grease, or rubbing alcohol, q-tips and patience. I put everything together and now it makes a nice solid contact to the MB. Be careful not to overtorque - you basically want to fasten it down solid to ensure no movement.
Guess what? The IOH temps are better now !!
CPU 31C
Sys 47C
IOH 86-93C (93 using cooling settings in MSI Overclock tool; 84 using default cooling settings = much improvement from 110-127C!!!)
(If Sys is hotter than IOH, make sure you have the latest version of MSI Overclocking Center program from MSI's website).
MSI-7522 i7 920 (Eclipse x58)
OCZ 3x2GB Ram (NOT overclocked)
ASUS 4800HD PCIx
Maxtor 1TB Drive -
(timelinecontrol with mousemove) How to make it animate back to x position on mouse over
Hello fellow creationists. LOL i mean in the artistic sense
I created parallax banner by following this quick simple tutorial located here: Creating a Parallax Effect in Edge Animate - YouTube
I noticed that it was creating an unattractive snap to x pos when you exited or entered the banner
So in mouseout i created a simple solution by adding: sym.play('posX'); which just means it plays to the end from the last x mouse position.
My problem now is when you enter the banner again it creates a snapping effect, So if its at 10 (the end) and the mouse goes onto the left side of the banner the animation will "snap" to the beginning position.
Anybody know how I can ease this? Like make it ease into that spot first and stop the snap effect? it ruins the parallax but edge animate is my only solution because of my limited knowledge in JS
Would appreciate any help! Refer to short tutorial i linked to, to understand what im talking about. Let me know if u want my current files to help.Just had a quick look and came across this, don't know if it will help you though parralax banner with smooth mouse move
Hope you find your answers! -
I have a application build in Labview 8.5 which wroks fine with Windows XP , this program uses basic read /write functions of NI Visa to communicate with Hardware . This application doesnt work with Windows 7 32 bit/64 and Vista . What changes i need to do to make it work for the said operating system
srinivas wrote:
Sorry for confusion ,
My question is what changes i need to do in code or while making the installer to make the existing program work with other Windows operating system
You need to make sure the machine have the corresponding NI-VISA installed. Check in the NI software pages for the right version.
Also make sure that the com port's can be selected when you first start the application. Eg. if you refer to VISA "COM1" on the XP machine It might be "COM2" on the Win7 machine.
Br,
/Roger -
How to make JRE5 run on Win7 with JRE6?
Basically, what I want to do is run .jnlp files with JRE5. Everything else can be JRE6.
On XP, all I had to do was associate .jnlp files with the javaws.exe (Java Web Start) file located in the JRE5 bin folder. That way, everytime I open a .jnlp file it runs with JRE5.
On Win7 (x64), this is not the case. In fact, even if I select "Open with..." and choose the javaws.exe file in the JRE5 bin folder, it STILL runs with JRE6.
Oddly, it works with Firefox. In Firefox, I can select which program to open .jnlp file with. If I select the JRE5 javaws.exe file then it opens correctly with JRE5.
Does anyone have any idea how to get it working on Win7 as I've described?On Win7 (x64), this is not the case. In fact, even if I select "Open with..." and choose the javaws.exe file in the JRE5 bin folder, it STILL runs with JRE6.
Try this...
1. Open a console window.
2. Modify env var PATH so it does not refer to 1.6.
3. Use the full path to 1.5 JRE 'java' (not javaws) and then the full path to the jnlp
If that still runs 1.6 then explain how you determined that it is running 1.6.
Maybe you are looking for
-
Any known problems using IE6 and Adobe Reader 7 with LC:RM?
On an properly configured LC:RM server only allowing certificate (X509) authentication, Adobe Reader 7 always pops up some Username/Password dialog for authentication. Reader 8 and 9 work fine with certificates. Is this an known restriction, that Rea
-
My IPad keeps quitting on me. THIs has been going on for three weeks it's two years old
My IPad keeps quitting
-
How to achieve a roundtrip with Photoshop
Is there a method to re-import a PS file in Captivate? The problem with existing roundtrip with PS is that it is limited to layers that exist in PS during import. So after importing PS file (either as Flattened Image or as Multi Layer) and making som
-
Extractor for R/3 table T030
Hi folks, we are in need to extract the T030 table (standard accounts table). Is there any BI content extractor/datasource which we can use for extracting that table? Thanks for your help, Best regrads, bivision
-
Quantity field conversion problem in SAP script
Hi experts, I have problem with sap script quantity field conversion. In purchase order the actual value of field( MDPM-ERFMG) is 3,500. But in Print preview it is showing only 3.5 Any one Please help me in this problem thanks in advance murali