Timesheet postings blocked becuase system status is CNF

Hi Folks,
I have a project and in that one of the activities when used in the timesheet for booking times returns with a warning messange Syatem status CNF is active. I can see that the status says confirmed. How can i get rid of this error message?
Regards,
Chinmaya

Cancel the confirmation using CN29. and then try booking time.

Similar Messages

  • System Status I0009"CNF", I0012"DLV" ......

    Experts,
    with the system statuses I00xx can select / filter Statuses of Work Order Header and Work Order Operations. I am looking for status with belongs to "DSPT" & "PRT" on operation level. Where can I get an overview for this statuses.
    Thanks in advance
    -Jörg

    Hi,
    Not sure if i have understood your need correctly, but you can check in COOIS, select operations in List & you will get the details at operation level & their status. You can filter out only those status which you need.
    If my understanding of your need is not correct, please let me know.
    Regards,
    Vivek
    Added
    To get details about the status, you might also refer to tables TJ02 / TJ02T / JEST / JCDS
    Edited by: Vivek on Mar 16, 2009 8:07 PM

  • Invoice Postings-messaging as "system status is create is in active"

    Hi,
    When we are posting the invioce it is messaging as "system status is create is in active" for wbs0000000 & Origin message account assignment check
    please help how to come out.
    Thanks in Advance.

    Hi
    Check the status of WBS element. If it is in create status then release it.
    Thanks

  • How to decide system status cnf teco clsd

    Hi ,
    My requirement is to select work orders( auart), planned hrs( arbei), actual hrs( ismnw ) based on 'date range', 'work order type', func location ( tplnr ), 'abc indicator ( abckz).
    i have to list all work orders:
    for a particular planning plant say '1000' , systm status including CNF, TECO, CLSD, excluding PCNF , CRTD , DLFL and REL, I have to include all work orders except SM02 and CP01 and also exclude work orders scheduled outside query period .
    When the above is done, i need to sum planned work work hours scheduled for that week , divided by sum of planned work hrs.
    I am done with select statement part, how can i find system status or how to calculate system status .
    thanks.
    Raghu

    Hi Seshu,
    I have to extract auart, arbei, ismnw based on date range, work order range, func.location range ( tplnr) , abc indicator( abckz).
    list all work orders ( auart) with planning plant '1000', system status including CNF, TECO, CLSD , excluding PCNF CRTD DLFL and REL, including all work order types except ' CP01' .
    Then i have to sum planned work hrs scheduled for that period and divide by sum of planned work hrs .
    say if sum of earned hrs is 10 and planned work hrs scheduled are 20 then
    10/20.
    Here i have to find earned hrs from AUFK table.
    Basically i would like to know about system status , whether it depends on planned hrs and earned hrs or just i have to extract it from JEST or use status_read.
    Thanks.
    Raghu

  • Revoke System status : Block account assignment (AALK).....Very urgent...

    Currently system status is "REL AALK" and user status is :"REL" in WBS element.. Our payroll has been stucked in Production server due to system status :Account assignment block (AALK) in WBS element.
    Kindly help me how to unblock account assignment )AALK) from system status in WBS element.
    Thanx n regards
    Amit Choudhary

    Anyway i got the solution and issue has been resolved.

  • CNF (Confirmed) in system status in CJ20N

    Good Morning PS Gurus,
    Once again I request to help me..
    What triggers the status CNF (Confirmed) in system status in project builder  and how can this status be changed / removed?
    Many thanks in Advance.
    MM

    Hi
    Only activities can have "confirm' status in projects. Once the activities are confirmed its assciated network gets this status accordingly. The status is used to confirm actual work done on the activity as aganist planned.
    To cancel the confirmation, usetransaction-CN29.
    Regards

  • System status and user status Priority

    Hi All,
    We have system status and user status for the production order, I would like to know which has higher priority.
    E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
    Regards,
    Ranjan

    Hi,
    As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
    Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
    Both work with "AND" condition.
    Regards,
    Rohit.
    Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
    Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
    Hope the example helps.
    Regards,
    Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

  • How to find out System Status of WBS Elements?

    Hi PS Experts!
    Please help me on my query.
    I want to get a list of WBS elements whose status is Released and can be used.
    If I try to search the table PRPS, it can only help me in finding WBS elements without deletion flag, with RA Key and so on.
    But the System status (such as Blocked for use) etc. is not present in the table.
    The one way I know is to get Object Number of WBS element from PRPS Table and insert it in JEST Table to get system status.
    Or alternatively, I give the WBS element no. in CJ20N t-code, and then check for System Status.
    These 2 methods work, if I do it one WBS Element at a time. If I need to get thousands of WBS elements in such a fashion, it's tedious.
    So could anyone help me on this issue?
    Thanks in advance,
    Vinitha.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • Production order system status after being settled

    Hello,
    I am currently in ECC 605 project. I remembered once production order is variance calculated and settled,new system status, VCAL , is set at production order.  And sometimes the production order won't be set with status VCAL even though it's variance calcualted. Does anyone have any experience at ECC release 605? Is it normal that settled order doesn't possess VCAL status?
    And another weird behavior is that production order can be settled without variance calculated. At earlier release, system will
    pop up error message if I try to settle a production order which isn't variance calculated. Can anyone confirm if at release 605 it's normal system behavior that system won't block order settlement of production order which variance calculation isn't done yet?
    B. Regards,
    Nancy
    Edited by: Nancy Lin on Jul 14, 2011 9:45 PM

    Hi Rose,
    Try out ..
    STATUS_READ
    http://www.sap-basis-abap.com/sappp016.htm
    Re: Status of the Production Order
    Re: Production order status
    Hope it will solve ur problem
    Thanks & Regards
    ilesh 24x7

  • SET PM WOrk Order System Status to TECO

    Good Afternoon SAP PLM Forum users,
    Will you please tell me the best method to Technically complete (set system status to TECO) 85,000 PM orders that have system status REL and CNF or PCNF.
    Thanking you in advance
    Leslie

    Hi,
    You could use IW38 to select and generate a list of orders. Then from the output screen highlite a group of orders and choose the complete function.
    Also BAPI_ALM_ORDER_MAINTAIN method TECHNICALCOMPLETE could be used with later releases.
    -Paul
    Thread moved to EAM forum

  • Handling unit system status

    Hello Everyone,
    I am looking for system status of handling units.
    In HUMO transaction, under tab-strip <b>Status</b>, we have <b>HU-specific data</b>. In this block, we have <b>System status</b> field, where the status of handling units are maintained.
    I am trying to retrieve the value of this system status field from database table, but it takes me to structure VEKP_TXT under which there is one filed SYS_STATUS.
    Could not find in which table the system status are stored by SAP.
    The possible values of this status field are:
    PHEX
    UNLD
    Anybody having idea where the value of system status field gets stored in database table.
    Thanks in advance.
    Regards,
    Tarun

    Hi TG  ,
    values comes from Domain , So try to get values from domain itself.
    <b>DDUT_DOMVALUES_GET</b>and name is <b>HU_SYSSTATUS</b>--->System status.
    Regards
    Prabhu

  • System status INCM is active

    Hi all, I am working in SRM 4.0 and when I try to do a confirmation, the system throws this message:
    System status INCM is active
    Transaction CO Through-postings from FI has been locked 
    I check all periods in FI, CO and MM and all are OK.
    What can be happened?
    Thanks in advance
    Rosa

    Sorry! the problem was solved, there is a period in CO that have problems and it was locked....
    Sorry about this
    ROsa

  • System status in plant maintenance

    Hi :
    I still have doubt in using  FM status_read and tables jest and tj02t.
    My requirement is to select work orders( auart), planned hrs( arbei), actual hrs( ismnw ) based on 'date range', 'work order type', func location ( tplnr ), 'abc indicator ( abckz).
    i have to list all work orders:
    for a particular planning plant say '1000' , systm status including CNF, TECO, CLSD, excluding PCNF , CRTD , DLFL and REL, I have to include all work orders except SM02 and CP01 and also exclude work orders scheduled outside query period .
    When the above is done, i need to sum planned work work hours scheduled for that week , divided by sum of planned work hrs.
    I am done with select statement part, how can i find system status or how to calculate system status .
    thx.
    Raghu

    once u pass required data to this FM , u will get all status of the PM order , from that status table u have to check weather it is closed or Technically Completed or Confirmed orders. So here  u have to looop status table with these conditions.
    sample code will be.
    loop at itab.
    read statustab with key order = itab-order
                                       stat  = 'CLSD'.
    if sy-subrc ne 0.
    check for TECO.
    if sy-subrc ne 0.
    check for CNF.
    else.
    here no need to consider other orders which are not in that given list.
    endif.
    endif.
    endif.
    endloop.
    Regards
    Peram

  • System Status in COOIS

    Hi ,
    In COOIS report  two system status " REL and CLSD system status" is not work  for excluding .when i do exclude CLSD it is not effect in report output it is display but for another status it is work ok.another thing it is not work only Quality server but other server production and development it is work fine.
    T&R

    Itsmerajkhan,
    This is the incorrect Forum for this kind of question. What I suggest is that you do a search on COOIS and find the most appropriate Forum for this question.
    I did a search and saw a number of areas where this question may be best asked, but only you will know which is closest to your need.
    These Forums do NOT allow multiple postings of the same question in multiple Forums. Please close this message, find the most appropriate Forum using the Search box above and repost there.
    Regards,
    Bob

  • Regarding TECO system status in Plant maintenance

    Can anyone suggest me the BADI or exit for blocking TECO status along with SDRQ user status

    Hi,
         Please check the user exit : IWO10004 Maintenance order: Customer check for order completion
    I believe the above user exit gets triggered when TECO is set ..
    Check whether FMs STATUS_READ or STATUS_CHECK is helpful or no
    If system status or user status is not there in DB Table then u may have to read via structure ..
    Check this link Block Order TECO on the basis of operation User Status
    regrds
    pushpa

Maybe you are looking for