Timezone from location?

Seems like this should be an easy one but I didn't see the answer in the Spatial Docs or a reference on the forum: Is there a built-in to determine the local timezone from a point?

There is no built-in geospatial time zone information within Oracle Spatial (or other parts of Oracle for that matter). I am certain you could find a web service etc. that might respond with this info. or you could easily download something like a shapefile (http://edcftp.cr.usgs.gov/pub/data/nationalatlas/timeznp020.tar.gz) with this info. whereby you could use something like Oracle Map Builder (http://www.oracle.com/technology/software/products/mapviewer/index.html) to load it into the database. There are lots of solution to choose from, but none come with Oracle today.
-Justin

Similar Messages

Is ti possible to label a set of tape with a specific media family. For eg. I want media family'xyz' to use tape only from location '1-6'. Is this possible in OSB

-Is it possible to label a set of tape with a specific media family. For eg. I want mediafamily 'abc' to use tape only from location '1-6' and media family 'xyz' to use tapes from location '7-12'. Is this possible in OSB.
-If not through media family, is there any other way to label tapes with customized lablels.
-Is it possible for a backup job to use the tapes from a set of tapes and backup should fail if the tapes are not found from the set. Even if the library has empty tapes.
I have read about Volume set, but I believe its something that is created automatically when the backup spans to the next volume after current volume is full.

-Is it possible to label a set of tape with a specific media family. For eg. I want mediafamily 'abc' to use tape only from location '1-6' and media family 'xyz' to use tapes from location '7-12'. Is this possible in OSB.
-If not through media family, is there any other way to label tapes with customized lablels.
-Is it possible for a backup job to use the tapes from a set of tapes and backup should fail if the tapes are not found from the set. Even if the library has empty tapes.
I have read about Volume set, but I believe its something that is created automatically when the backup spans to the next volume after current volume is full.

Change timezone from command

how to change timezone from command in windows server 2008
Sudhir

Hi,
1. Open an elevated "Command Prompt".
2. Now provide any of following commands:
tzutil /g (To know current time zone)
tzutil /l (To get a list of all available time zones)
tzutil /s time_zone_ID (To change time zone)
Fox example, if you want to set the time zone to "Pacific Standard Time", then the command would be:
tzutil /s "Pacific Standard Time"
Best regards,
Vincent Hu

From location ,to location

Hi Guys,
i am new for po module and inventory.
let me know the query for this one based on po no, i want to find out the item details,that from location, to location names.
thanks inadvance
Edited by: 836924 on Mar 24, 2011 11:48 PM

Hi;
Please check below note which may helps you on your issue:
Sample Script of Receiving Open Interface (ezROI) [ID 245334.
I suggest also see e-trm site(etrm.oracle.com) which you can find relation,integrty etc about PO tables
Regard
Helios

How to delete unwanted timezones from Calendar app on Yosemite?

I upgraded to Yosemite and one of the problems I had with Calendar App had something to do with Time Zone.
I realized that Calendar added California time as default. So now I want to delete the unwanted time zone, but cannot find a way to do so.
How does one remove or uncheck a time zone in iCal (Mountain Lion)?
I found this forum and tried, but as the last person who posted said, it doesn't work on Yosemite.
Does anyone know to delete unwanted timezones from Calendar App on Yosemite?
Thanks.

Thank you for your response.
However, I am not asking about how to change the timezone on Mac. I'm asking about how to delete unwanted timezones on Calendar app.
Here I have 2 Pacific Time's. They are basically the same, but sometimes my computer choses one of the other without my intention. And when it does, it keeps showing (PST) on next to the starting time which I do not want. In order to avoid that, I'd like to delete "Pacific Time (America/Los_Angeles)". From the link you provided, I'm not finding the solution to this. I might be looking at a wrong spot and if so please be patient to guide me through.
If my question still doesn't make sense, please click the link to the solution for the same problem on Mountain Lion in my original question. You might understand my question better from it.
Thank you.

How to set "From Location" in OMBPLUS

Hi,
additional question:
After import of a non_oracle location with database link the field "from Location" is not set. I need to set it to OWB_REPOSITORY_LOCATION.
How can i do in in OMBPLUS?
Regards
Helga

Hi Helga
See the code referenced here;
Re: OMBCREATE LOCATION from dblink - Available properties?
In the UI when you create a location X of type database link, from location Y using dblink Z, then a connector from Y is created to X behind the scenes. So from scripting you have to create this....
OMBCREATE LOCATION 'X' SET PROPERTIES (TYPE,VERSION,CONNECTION_TYPE) VALUES ('ORACLE_DATABASE','11.2','DATABASE_LINK')
OMBCREATE LOCATION 'Y' SET PROPERTIES (TYPE,VERSION) VALUES ('ORACLE_DATABASE','11.2')
OMBCREATE CONNECTOR 'Y/X' SET PROPERTIES (DATABASE_LINK_NAME) VALUES ('LINKNAMEHERE') SET REF LOCATION 'X'
Cheers
David

I have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that

i have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that

http://support.apple.com/kb/HT3743
Sorry discussing J/B is in breach of the terms and conditions of thi Apple hosted forum
Google is probably your best hope

Timezone from offset

Hi Folks,
To retrieve the client time zone, i gathered the timezone offset through javascript from the client. And i need to produce timezone from this offset at the server side.
Hence please let me know, if there is any chance to produce the timezone from the offset value.
Note: i tried TimeZone.setRawOffset , but it changes the offset but not the time zone.
Thanks,
Vivek

Calendar.setTimeZone?

Could not load load from location:/test_subreport.jasper

Hi All:
Any help or hint is greatly appreciated it!!
I am currently using IceFaces 1.8.2, Jsf 1.1, and JasperReport 3.5.2.
I get the following error:
net.sf.jasperreports.engine.JRException: Could not load object from location : /test_subreport.jasper
The report test_report.jasper has a subreport called test_subreport.jasper. I placed both test_report.jasper and test_subreport.jasper in the directory "WEB-INF/reports/"
public String testSearch() throws Exception
          try
               Connection connection;
               FacesContext context = FacesContext.getCurrentInstance();
               HttpServletResponse response = (HttpServletResponse)context.getExternalContext().getResponse();
               InputStream reportStream = context.getExternalContext().getResourceAsStream("WEB-INF/reports/test_report.jasper");
               ServletOutputStream servletOutputStream = response.getOutputStream();
               ServletContext ctx = (ServletContext) FacesContext.getCurrentInstance().getExternalContext().getContext();
               String filepath = ctx.getRealPath("/WEB-INF/reports/");
               filepath = filepath = "/";
               String imagepath = ctx.getRealPath("/WEB-INF/images/test_logo.gif");
          HashMap parameterMap = new HashMap();
          parameterMap.put("SUBREPORT_DIR", filepath);
          parameterMap.put("Test Number", testNumber);
          parameterMap.put("Image Path", imagepath);
          Properties properties = new Properties();
          properties.load(context.getExternalContext().getResourceAsStream("WEB-INF/config.properties"));
          String driver = properties.getProperty("jdbc.driver");
          String jdbc_url = properties.getProperty("jdbc.url");
          String username = properties.getProperty("jdbc.username");
          String password = properties.getProperty("jdbc.password");
          Class.forName(driver);
          connection = DriverManager.getConnection(jdbc_url, username, password);
          JasperRunManager.runReportToPdfStream(reportStream, servletOutputStream, parameterMap, connection);
          //byte[] reports = JasperRunManager.runReportToPdf(reportStream, parameterMap, connection);
          connection.close();
          response.setContentType("application/pdf");
          servletOutputStream.flush();
          servletOutputStream.close();
          catch(Exception e)
               log.error("exception message:"+e.getMessage());
          return "success";
     }

There is a forum dedicated to JasperReports and you might find help there..
http://jasperforge.org/plugins/espforum/browse.php?group_id=102&forumid=103
Also don't forget to use tags because they make it easier for others to read your posts.
Finally, I suggest moving all of your database access code into a separate class. It will help you write code that is easier to maintain.

How can I prevent printing of this FROM location label even if suppressed?

I am using Crystal Reports 10.
The examples follow the problem description.
The idea is print a label when moving one part from one location to another.
The Control ID# is the main parameter which I must receive in order to get the values from the 3rd party software to print the label information.
The Control Rec# is from the Record Number within Crystal Reports.
The Trans Rec ID# is the data I am retrieving from the transaction table. This Trans Rec ID# s the link between the Control ID# table, which also contains the Trans Rec ID# for this table.
The 3rd party software always passes one control record#, which will always have two records - one negative quantity and one positive quantity. The records are always in order by negative then positive quantity. Also, the Trans Rec ID# is in ascending sequence. The negative record will display "FROM" in the location portion of the label.
   NOTE: Each time the label is to be printed, there are two more records created in the transaction table.
Here is a list of what I have tried, by itself and/or in conjunction with the others:
- in the Record Selection, I have tried selecting just the positive quantity, which will give me a leading blank page
- suppressed the Report Header
- conditionally suppressed report header - always prints blank page at beginning (see Example #2)
- conditionally suppressed detail (this works fine - see Example #2)
- sorting records in descending order by quantity
- sorting records in descending order by Trans Rec ID#
- grouping by Trans Rec ID#
- grouping by quantity
Whenever I try to suppress the printing of the negative quantity label, which I do not want to print, it always prints as a blank page. Is there a way to keep it from doing this? Is there something I can do that I am missing?
Example #1 : Suppressing report/page headers
Part# ABC      Control ID# 166551   Control Rec# 1   Trans Rec ID# 143497   ...
Quantity = -1   Location = DC0-19   (This is the FROM Label)                                                                                .
Part# ABC      Control ID# 166551   Control Rec# 1   Trans Rec ID# 143498   ...
Quantity = 1     Location = DOCK     (This is the TO Label - no indicator of From/To prints)
=================================================================
Example #2 : In Record Select, selecting only positive quantity and suppressing headers
(Blank page prints here - negative record is the first record)
Part# ABC      Control ID# 166551   Control Rec# 1   Trans Rec ID# 143505   ...
Quantity = 1     Location = DOCK     (This is the TO Label - no indicator of From/To prints)
=================================================================
Edited by: Rose Goehring on Aug 10, 2010 11:54 PM
Edited by: Rose Goehring on Aug 11, 2010 12:01 AM

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Firefox 4 does not search from Location Bar (Awesome Bar)

I have searched the knowledge base, and not found anything exactly like my problem. A similar question, '''[https://support.mozilla.com/en-US/questions/815325 Url Keyword guessing does not work]''' is close... but only close. Link below.
I was previously able to type some keywords into the Location (Awesome) Bar, and it would either jump to an appropriate page, or come up with a Google Search page of possible sites.
I have upgraded to FF4, and while I can successfully conduct searches from the dedicated Search Bar, typing keywords into the Location Bar brings this problem. I have used "Mozilla Foundation" as my search keys:
'''Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.propertiesmozilla+foundation.'''
The portion '''file:///C:/Program''' appears blue as if it is a link, but clicking on it, nothing happens. I have attempted multiple search keys, and nothing changes.
I have attempted to use the about:config | keyword.enabled to turn it off, then back on, and it doesn't seem to have worked. I really can't decipher anything about the message that I do get (above). This may or may not matter, but I was surprised to find that my existing Add-On, "Microsoft .NET Framework Assistant 1.2.1" is no longer compatible, and thus not functioning.
Thank you very much for helping.

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/Keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

Fixed Assets move from location

Hi SAP Experts,
Business wants to capture all the costs into creating an asset as Asset Under Construction and then at completion wants to settle it to an Asset at a certain location. I would like to know if this Asset can be moved from its primary location to another location without effecting its Depreciation. If the answer is yes, then I also want to know how this can be done.
Your quick response will be highly appreciated and rewarded with points.
thanks to All !

Hi Sameer,
The best solution for this is to use the Investment Measure for the Internal Orders. What it does is, you need to create an Investment Profile in which you will give the defaut Asset class (AUC). When you create an Internal order and release it in the back ground an AUC asset is created. In the Internal oder in the settlement rule give the main asset number to which you want this AUC asset to be settled.
All the costs incurred for this AUC is stored in the Internal Order and by doing KO88, Automatic Settlement you will be transferring all the values in the IO to the AUC asset (By default the IO value can be settled only to this AUC asset created) and when you do Complete settlement (KO88), the value in the AUC asset gets transferred to the Main Asset maintained in the Settlement Rule.
Hope this will clear your doubt.
Regards
Sridhar

Disable loading of site from location bar

I've been using Beta 4 for a while, and it seems in the last two builds the location bar auto complete seemed to change a bit. I love how FF will work and pull my recent pages in the location bar as I type parts of the page name. However, it is extremely frustrating for FF to automatically load the page before I even click on the link. Often, it will load a page that is inline with the results put into the bar, but not the desired page. (Ex - I want to visit 10.15.1.10, start typing and after putting in 10.1, it loads 10.19.1.10, the page I just came from. At this point the page has loaded and I need to restart entering the desired address)
Is there any way to make it so the behavior required to load a page is either click or press enter?

It's particularly annoying when your favourite link need a password: the login/password dialogue box appears after every keystroke and grab the focus of the location bar without explicit permission.

I can't delete history from location bar anymore, pressing delete only eliminates it for that instant, but doesn't remove from history

upgraded to firefox 4 today

If you want to remove all traces of a site, open up the history sidebar (use keyboards shortcut Control+H), locate the site in the history, right-click on it and select "Forget About This Site". That will delete all traces of that site from browsing history, cookies, bookmarks, passwords and site preferences.

How to Change TimeZones from Personalize iView

Hi All,
In my Masthead, i need to Display the Country name and the Time, user is going to chnage the time zone and Country from Personalize iview User Profile, according to that the respective time is going to display it on Masthead part.
Now my Question, If user is Change the Timezone & Country in the User profile, how it is going to reflect on Masthead area.
Thanks In Advance
Krishna Ganesh

Hi Michael,
In the Masthead JSP it self, we are adding jsp scriptlets and html Div Elements to display the time on the Masthead. Currently i am able to display the server time with normal Java API.
Now i am going to display 5 timezones in a Iview, that iview is going to add to user's HomePage(User Choice).
Thanks
Ganesh

Timezone from location?

Similar Messages

Maybe you are looking for