TNS-12547 error listner start.
Hi all.
I have installed Oracle 10GR2 on Oracle Unbreakable Red Hat Linux 4 AS.
When I startup db through sqlplus, db started ok. But when I try start listner,
I receive the following:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host.domain)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Please help me.
Andrew.
There is my tnsname.ora :
# tnsnames.ora Network Configuration File: /home/oracle/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
STRM.HOST_NAME =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOST_NAME)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = STRM. HOST_NAME)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
Similar Messages
-
TNS: 12547 error on install of 10g on GNU/Linux
I tuned my machine as follows per the docs ( I think |-( ):
but when I install 10g all goes well till it tries to install a database.
Then I get this TNS 12547 error and can't get past it...
HELP PLEASE!
Richard
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstallWe couldn't get the standalone installer to work, so we downloaded the entire obiee suite, started the installer, chose custom and only installed BiPublisher standalone. We're getting ready to apply the patchset from the 10.1.3.4.0 install to a fully patched 10.1.3.4.1 (metalink note: 797057.1 )
-
Linux Error: 104: Connection reset by peer TNS-12547: TNS:lost contact
My system seems to be hanged , so I restarted my RHEL 4 linux with ORACLE 10.2.0.4.
but i can't able to start the listener.
please help me out.
[oracle@localhost log]$ lsnrctl start LISTENER_LIMCAMP
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 09:02:09
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /ora10gsoft/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.4.0 - Production
System parameter file is /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener_limcamp.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer[oracle@localhost admin]$ cat listener.ora
# listener.ora Network Configuration File: /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER_LIMCAMP =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1521))
CLONE =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1523))
PROD1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1522))
SID_LIST_CLONE =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /ora10gsoft/oracle/product/10.2.0/db_1)
(SID_NAME = CLONE)
SID_LIST_PROD1 =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /ora10gsoft/oracle/product/10.2.0/db_1)
(SID_NAME = PROD1)
SID_LIST_LISTENER_LIMCAMP =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /ora10gsoft/oracle/product/10.2.0/db_1)
(SID_NAME = LIMCAMP)
[oracle@localhost admin]$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dev)
LIMCAMP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = LIMCAMP)
# tnsnames.ora Network Confi72uration File: /ora1072soft/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
LISTENER_DEV =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1522))
LIMCADEV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = LIMCADEV)
LIMCASP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.119.221)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = LIMCASP)
TOCLONE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1523))
(CONNECT_DATA =
(SERVICE_NAME = CLONE)
TOPROD1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.106.72)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = PROD1)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
[oracle@localhost admin]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 13:07:55
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /ora10gsoft/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.4.0 - Production
System parameter file is /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
[oracle@localhost admin]$ lsnrctl services
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 13:08:02
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
[oracle@localhost admin]$ lsnrctl start LISTENER_LIMCAMP
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 13:08:13
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /ora10gsoft/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.4.0 - Production
System parameter file is /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener_limcamp.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.106.72)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.106.72)(PORT=1521)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
[oracle@localhost log]$ tail -100 listener.log
TNSLSNR for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 13:00:22
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener.log
Trace information written to /ora10gsoft/oracle/product/10.2.0/db_1/network/trace/listener.trc
Trace level is currently 0
Started with pid=6230
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1522)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 13:02:15
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener.log
Trace information written to /ora10gsoft/oracle/product/10.2.0/db_1/network/trace/listener.trc
Trace level is currently 0
Started with pid=6295
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for Linux: Version 10.2.0.4.0 - Production on 26-AUG-2010 13:07:55
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is /ora10gsoft/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /ora10gsoft/oracle/product/10.2.0/db_1/network/log/listener.log
Trace information written to /ora10gsoft/oracle/product/10.2.0/db_1/network/trace/listener.trc
Trace level is currently 0
Started with pid=6429
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
[oracle@localhost log]$ pwd
/ora10gsoft/oracle/product/10.2.0/db_1/network/log
Please find the above inputs.
Regards,
Sakthivel -
Newbie : Problem starting OPG for IBM MQseries: TNS-00530, Error Code 2
Hi All
First of all, if this is the wrong place to post this question, I apologize.
I have installed a new installation of Oracle 9.2.0.1 and at a separate home location the OPG for IBM MQSeries for 9.2.0.1 off the same bits.
The configuration said that the default SID of PG4MQS92 would be setup since I was using a local MQ queue manager but I didnt see any entries in the listener.ora or the tnsames.ora so added the following.
listener.ora
(SID_DESC =
(SID_NAME = pg4mqs92)
(ORACLE_HOME = C:\Software\oracle\pg4mqs92)
(PROGRAM = pg4mqs92)
tnsnames.ora
ORACLE_QM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = testmachine)(PORT = 1521))
(CONNECT_DATA =
(SID = pg4mqs92)
(HS=OK)
When I ran tnsping on ORACLE_QM it was resolved. But when I start the putsample.sql program after importing all the required packages using the pgmdeploy9.sql script I get the following output.
DECLARE
ERROR at line 1:
ORA-04052: error occurred when looking up remote object
[email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from PG4MQ
In the listener.log I see the following error
07-DEC-2005 07:34:19 * (CONNECT_DATA=(SID=pg4mqs92)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=1271)) * establish * pg4mqs92 * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
I noticed that during the install a boot file for the pgm4mqs92 SID was not found anywhere. Is it maintained in the registry, if so where ?
If the boot file is missing is there a sample I can use and where do I need to put it ?
Am running on Windows XP Professional.
Have been stuck with this a while and cannot find any information on this, so any help would be appreciated.
Thanks
- DeepakI am getting the same error while starting or stopping the listener
LSNRCTL> start CSCLIST
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> stop CSCLIST
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CSCINDAE708070)(PORT=152
2)))
NL-00303: syntax error in NV string
TNS-01153: Failed to process string: (DESCRIPTION=(CONNECT_DATA=(CID=(PROGRAM=)
(HOST=)(USER=Manager(REMOVE)))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=CSCLIST)(VERS
ION=186646784)))
Pls help
Listener.ora:
# listener.ora Network Configuration File: D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
CSCLIST =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CSCINDAE708070)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_CSCLIST =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\Sagaya\11gDBhome\product\11.2.0\dbhome_1\bin\oraclr11.dll")
ADR_BASE_CSCLIST = D:\Sagaya\11gDBhome -
To answer the post from Manwendra Jun 20, 2013 7:17 AM
" TNS:protocol adapter error while starting Listener created by Oracle SES11.1.2.2 Setup "
https://community.oracle.com/message/11077982#11077982
Hello,
Probably that you already have the listener up and running from your installation of SES.
Also, you could check in your Windows Services (from the Control Panel), you'll see that
there is a service like OraclesesTNSListener up and running.
If it is the case, then it's probably why it is telling you the message below when trying to start it again:
TNS-01106: Listener using listener name LISTENER has already been started
Then, before trying to start the listener, you can check if it is already up by running the command : lsnrctl status
If you need to shut it down, then you can run the command : lsnrctl stop
for example, from the command line:
> set ORACLE_SID=ASUSES
> set ORACLE_BASE=D:\ses\
> set ORACLE_HOME=D:\ses\seshome
> cd %ORACLE_HOME%/bin
> lsnrctl status <== this will give you the status of your listener
> lsnrctl stop <== this will stop your listener
> lsnrctl start <== this will start your listener
Hope this can help you and others.
Regards,
-Stephani have done that. i copied the tnsnames.ora, sqlnet.ora, listener.ora files from the c:>oracle-home\network\admin folder into oracle_devhome\network\admin folder. i have also set the environment variable oracle_sid=skoolman. skoolman is my sid as you can see on the tnsnames.ora. but the error massage still comes up as soon as i run forms from the forms builder environment.
but as i said i am able to connect to the database with my user name and pass word from within the forms builder environment to access my tables and create data blocks etc but as soon as i run the form through internet explorer the forms servlet boots up and the error massage ora-12560 tns protocol adapter error pops up.
thanks guys for your heip. please i need more solutions -
TNS-12518: TNS:listener could not hand off client connection TNS-12547
Hi guys,
I have started my listener from 10.2.0.5 home , which was in 10.2.0.4.
from that point am having issue connect to 10.2.0.4 databases which are in restricted session(DR db)
when I try to connect to databases which are in restricted session it says TNS connection closed. databases which are open am able to connect.
listener.log shows
TNS-12518: TNS:listener could not hand off client connection TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Solaris Error: 32: Broken pipe
any idea why its happening.902988 wrote:
Hi guys,
I have started my listener from 10.2.0.5 home , which was in 10.2.0.4.
from that point am having issue connect to 10.2.0.4 databases which are in restricted session(DR db)
when I try to connect to databases which are in restricted session it says TNS connection closed. databases which are open am able to connect.
listener.log shows
TNS-12518: TNS:listener could not hand off client connection TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact
Solaris Error: 32: Broken pipeOS/Networking misconfiguration.
Oracle is victim; not culprit.
Root cause & solution is external to Oracle
How many different DB versions installed on this system?
post results from following OS command
env | sort
Handle: 902988
Status Level: Newbie
Registered: Dec 17, 2011
Total Posts: 7
Total Questions: 4 (4 unresolved)
Why post here when you NEVER get any answers?
Edited by: sb92075 on Apr 13, 2012 1:12 PM -
TNS-12500: TNS:listener failed to start a dedicated server process
Hello all,
I have recently applied a patch on apps tier, after which the concurrent manager is not up & running,
while viewing the internal log
im getting the below error
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Starting AVAILMGR Concurrent Manager : 25-NOV-2013 13:02:02
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager AVAILMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Process monitor session ended : 25-NOV-2013 13:02:02
========================================================================
Starting test_1125@test Internal Concurrent Manager -- shell process ID 25362
logfile=/d01/apps/testcomn/admin/log/test_test/test_1125.mgr
PRINTER=noprint
mailto=appltest
restart=N
diag=N
sleep=60 (default)
pmon=20 (default)
quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 25-NOV-2013 13:03:01 -
Shutting down Internal Concurrent Manager : 25-NOV-2013 13:03:01
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The test_1125@test internal concurrent manager has terminated with status 1 - giving up.
WARNING: RunAsUser for MSP ignored, check group ids (egid=501, want=51)
can not chdir(/var/spool/clientmqueue/): Permission denied
Program mode requires special privileges, e.g., root or TrustedUser.
Also in apps tier $TNS_ADMIN
the log says
25-NOV-2013 14:57:51 * ping * 0
25-NOV-2013 14:57:51 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=5147)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipeHI thanks for your reply,
I tried the above guide but dint helped me,
I tried modifiying Concurrent:GSM Enabled to N & concurrent manager started but all requests were in pending state not running so i reverted back to Concurrent:GSM Enabled Y
I ran autoconfig & this is the lastes error I am getting in internal manager log.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager : 25-NOV-2013 15:51:20
The below is the log from $TNS_ADMIN log directory apps_test.ora
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.30.82)(PORT=13510)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:01 * ping * 0
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13512)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13514)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.30)(PORT=13516)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe -
TNS-12547 lost contact - listener log has TNS-12516??
OS: Win98
DB: Personal Oracle8i 8.1.6
Attempting to make connection from JDBC and eventually found out even TNSPING has problems. I have a listener configured on port 1521, using 127.0.0.1 as the host (I'm doing development on same machine).
I do lsnrctl start LISTENER, but afterwards a lsnrctl status LISTENER returns nothing. Not sure if it only replies if there is a problem. Anyway, it seems like the listener is running, otherwise I'd get a different error, like no listener.
I can't find docs on TNS-12516, and the explanation of 12547 isn't very helpful. The full error text in the listener.log is as follows:
22-JUN-2001 16:05:24 * handoff * giop * 12516
TNS-12516: TNS:listener could not find available handler with matching protocol stack.
I can provide more info if needed.I also have the same problem. It doesn't seem to happen regularly but off and on. When this database state occurs, I can't even shutdown the database. It appears to hang due to an unknown cause. When I check my listener log, I see that the error messages I was getting were the TNS-12516 errors. The really odd thing is that some of my Perl DBI and PHP programs were still going through without a problem while my sql*plus and discoverer connections were dying with the TNS-12516 error. If anyone has ANY ideas at all, please respond.
-
Error when starting configtool.
The installation is successful. But I am getting the following error when starting configtool:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while conn
ecting to DB.
This is not during the installation as given in some of the other posts. The installation is successful and I am able to start and run the J2EE engine and the Portal. This error occurs when I try to start the config tool.
Any help would be appreciated. Thanks.Hi Arul,
Have you checked the parameters that the configtool is using to connect? (don't use default settings)
What database is this on? In the case that it is oracle can you TNS ping the db? The listener is running?
Regards
Daniel -
TNS-12518 error while trying to fetch data from SQL Server
Hi everyone,
I'm trying to establish connectivity from Oracle 10.2 server to a SQL Server 2005. These are the server details
DOVER - This is where I installed Oracle Gateway for SQL Server. There's already an Oracle home in this server and I have used the existing listener for the incoming connections
LUNDY - This is where my actual Oracle server resides
HEBRIDES - This is where SQL Server 2005 instance resides, the database name is TRACKIT90
I've set everything as explained in Oracle documentation http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch2.htm#i1005694 but in the end I'm getting an TNS-12518: TNS:listener could not hand off client connection when I run a test query and this is what it says in the listener.log of DOVER
01-MAR-2010 15:33:19 * (CONNECT_DATA=(SERVICE_NAME=tg4msql)(HS=OK)(CID=(PROGRAM=w:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE)(HOST=LUNDY)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.58)(PORT=3887)) * establish * tg4msql * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
My initialization parameter under \\ORACLE_HOME\tg4msql\admin of gateway installation in DOVER is as below:
HS_FDS_CONNECT_INFO=hebrides.TRACKIT90
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
The listener.ora of the active listener in DOVER has the following lines, by the way this listener does not reside on the same ORACLE_HOME as the gateway's ORACLE_HOME but it is the current active listener in the server. The listener has also been stopped and started:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dover)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_LISTENER =
(SID_DESC =
(SID_NAME = tg4msql)
(ORACLE_HOME = E:\oracle\product\10.2.0\tg_1)
(PROGRAM = tg4msql)
The following entry has been added to the tnsnames.ora in LUNDY server where my actual Oracle database resides.
TRACKIT_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DOVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = tg4msql)
(HS = OK)
And finally a database link is created by using the below DDL statement:
CREATE DATABASE LINK "DLINK" CONNECT TO "username" IDENTIFIED BY "password" USING 'TRACKIT_DATA';
When I do a select statement on one of the tables of TRACKIT database by using the following query I got the TNS-12518 error with above details
select * from announcement@dlink;
I would appreciate any help and also please let me know if I missed out any details.
Thanks.This is the output comes with the "lsnrctl service listener" command on DOVER server
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-MAR-2010 11:48:55
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "STD81", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:5 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "STD81_XPT" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "tg4msql" has 1 instance(s).
Instance "tg4msql", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:22
LOCAL SERVER
The command completed successfully -
I just installed 11.1.0.7 client on win 2003 server and tried to connect to 9.2.0.6 database but both tnsping and sqlplus is giving 'TNS-12547: TNS:lost contact' error
Please note that the same client 11.1.0.7 is connecting to database 9.2.0.8 and higher i.e 10.2.0.3 and 10.2.0.4.
Please advice as why 11.1.0.7 client is not connecting to 9.2.0.6 database and giving 'TNS-12547: TNS:lost contact' error.
Thanks in advance.Hi,
1)ping is working?
2)disable the firewall running on the windows machine,Check firewall at network level is affecting this connection
3)listener is up and running on the EBIZ side and u can connect using the service_name of EBIZ in EBIZ server?then copy the service_name entry form the server tnsnames.ora to the windows machine and try
4)Check at server o/s level are there any restrictions for other machine to get connect,Can u telnet to the server from this machine?
Regards -
Intermittent TNS-12547: TNS:lost contact
Does anybody experienced sporadic TNS-12547: TNS:lost contact, especially when loading machine with big INSERT queries? Is this well known and solvable? How may I track down this error? I'm using Oracle 8.0.5.0.0 on a standard RedHat 6.1 distribution.
Many thanks to everybody
[email protected]I've got the same problem. I'm trying to access the O9i 9.2. Either through TOAD or ODBC, I get an error from TNSLSNR:
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 9.2.0.1.0 - Production
Time: 14-JUL-2006 09:57:41
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12547
TNS-12547: TNS:contacto perdido
ns secondary err code: 12560
nt main err code: 517
TNS-00517: Contacto perdido
nt secondary err code: 54
nt OS err code: 0
Any ideas? -
Error after starting up listener
Hi all,
Im not a db operator and im quite new with oracle and solaris but we got a problem after rebooting this server, the listener fails to start
with the following error:
LSNRCTL for Solaris: Version 8.1.7.0.0 - Production on 03-DEC-2007 20:01:30
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Message 850 not found; No message file for product=network, facility=NL
LSNRCTL>
If i try to start the listening process it gives 2 other errors
LSNRCTL> start
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
Solaris Error: 2: No such file or directory
LSNRCTL>
I also can not start the SQLPLUS program =S
I read some other posts that these errors may be a path problem but im not sure if this is, and ifso how to correct it =o)
The database version is 8.1.7 and is running on solaris.
anyone has an idea how i can solve this problem?
Thanks in advance!
Message was edited by:
user608640Hi again,
Thanks for the reply but, how can i set the variable $ORACLE_HOME?
and to what directory it has to point? does it need to point to the oracle db or to the oracle bin dir?
thanks in advance! -
Hi,
I got following error while starting Oracle 9.2.0.4 on Solaris...
Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
Can anyone suggest why?
thx.If those env variables are not set so put them into
the .profile file but those values are going to be
accord to your enviroment
ORACLE_BASE=/DISK1/ORA_HOME9 export ORACLE_BASE
ORACLE_HOME=/DISK1/ORA_HOME9 export ORACLE_HOME
LISTENER=$ORACLE_HOME/bin/lsnrctl export LISTENER
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data export ORA_NLS33
TNS_ADMIN=$ORACLE_HOME/network/admin export TNS_ADMIN
PATH=/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/kde3/bin:/usr/lib/java/jre/bin:/DISK1/ORA_HOME9/bin:.
Joel P�rez -
Database Version : Oracle 9i
OS : Sun Solaris
while i start the listener i am getting the following error
Message 1070 not found; No message file for product=network, facility=TNSTNS-125
45: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facili
ty=TNS
TNS-00515: Message 515 not found; No message file for product=network, facilit
y=TNS
Solaris Error: 2: No such file or directory
How i can solve the problemI navigated to the bin folder and executed
lsnrctl start
Piror to do this it set the following env variables
ORACLE_SID=SIDNAME
export ORACLE_SID
ORACLE_BASE=/u01/app/product
export ORACLE_BASE
ORACLE_HOME=/u01/app/product/9.2
export ORACLE_HOME
TNS_ADMIN=/u02/app/product/9.2/network/admin
export TNS_ADMIN
still i am getting the same error
Maybe you are looking for
-
I have an Imac with snow leopard 10.6.8 and have lost the blue applications folder with an A from my dock please how do i get this bck in exactly the same format?
-
Could anyone run through what I need to do to make sure my Firewall is secure through my network router (I can't seem to tell how to find out on here) and if the computer's Firewall is active as well? I'm not sure if my network is secure and would li
-
A wish list for Nokia's next flagship Windows Phon...
Two months left for Nokia World in september. I think everyone is excited for it. Nokia will introduce its newest flagship Windows Phone 8 "Lumia". If Nokia wanted to succed, here's a list of "to-dos" Nokia engineers should care about. - A thin, soli
-
I just added OSX 6.8 and iTunes 10.7 to my 2008 vintage iMac in hopes of using my new iPod Nano (16GB). I tried just about just about every trick I could think of to isolate and handle the issue, but I kept getting the same message: "Attempting to c
-
Dear Experts, I have writen a Z program which converts the format of the output file, i need to execute the standard program rfebck00 after execution is completed i need the final output values back in my Z program for further process.. I tried with