To build application in hfm needs meatadata

to build application in hfm needs meatadata for practical approach
if u have any sample metada data(members, security file, rules file, etc... for hfm application can u please send to this id: [email protected]
Regards
rajips

yes i found one demo application data but i want more in that less data available( i have build application several times with same data i am boring to make ame thing so i am asking if any body have meta data please send to [email protected] thanks for ur reply
Regards
Rajips

Similar Messages

  • Why does Build Application vi work in development environment but not in executable; error 1025

    Hello,
    I have an application ("A") that I am trying to build using another application ("BuildA").
    I can create an application for A manually from its project using the Build Specification, and it works fine (A.exe).
    Also, when I run BuildA.vi in the development environment it calls the "Build.vi" correctly and again builds application A.exe just fine.
    Then, when I make BuildA an application (manually) and run BuildA.exe, I would expect it to also create A.exe just like BuildA.vi did in the development environment.
    However, it fails with the error:
    Code: 1025
    Open VI Reference in NI_App_Builder_API.lvlib:Build (path).vi->BuildA.vi<APPEND>
    VI Path: <b>C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi</b>
    I noticed this thread , which looks like a similar problem, but no conclusion was reached.
    Why does BuildA.vi work fine in the LabVIEW environment, but the application BuildA.exe does not work?  All paths are hard-coded, so it shouldn't be a path issue.
    Thanks,
    -john
    Solved!
    Go to Solution.
    Attachments:
    AppBuild.zip ‏175 KB

    Interesting code.  I'm curious how you came to decide 324ms in your while loop, and 58 in the other, and then 5136ms at the end.  In any case I suspect this has to do with this line of text in the help of the Build.vi.
    If you plan to run a build specification on the LabVIEW Run-Time Engine, do not include the Build VI in any of the VIs for the build specification.
    I don't fully know what this means but it might be why it isn't working.
    The Build.vi opens all Context (application instances) and then looks for the one named "NI.LV.MxLvProvider".  This I assume is a application instance NI uses to build applications.  It then uses this and opens some other VIs in this instance for the building.  The error you are getting is "Application Reference is invalid" meaning it couldn't find the NI.LV.MxLvProvider instance it needs to build.  Again I believe this maybe because you are in a run-time environment and that instance doesn't exist there.
    At the end of the day I'm guessing since Application Builder is not free, NI probably doesn't include it in the Run-Time engine, which is free.  So you can't build the way you want.  You could have and EXE running in the run-time open an instance in the development, then run your VI from there if you must make this an EXE.  It maybe easier to just edit the BuildA.vi to have a "Run When Opened" so that you double click the VI and it runs which behaves like an EXE sorta.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Error 1003 when loading subpanel VI in build application (VI not executable)

    Error 1003 loading subpanel VI in build application (VI not executable). I referenced all supanel VI callers in my build app. What am I missing?

    Thanks for your reply!! I tried a few things I found online including the article you posted...this unfortunately did not solve my problem. Through some trial and error process I found the issue was with my build properties in the advanced section shown below.
    I had to check LabVIEW8.x file layout to allow the subpanel VI to load into my main app. I didn't think to check this cuz my code was developed in version 2010. I'm guesssing some of the callers where originally created in older versions and needed the the LabVIEW8 file layout, even though all my source code is compiled in version 10. If you think I might be wrong on this assumption let me know.
    P

  • Building application with microsoft agent

    Can someone clarify if there is anything different that needs to be done while building a stand-alone application that includes VIs that use the MS agent voice VIs (for example MSagentTTS.llb) along with CGI VIs? I have been able to build applications with only CGI VIs but failed while adding MS agent VI functionality. Any help is greatly appreciated.
    -Sheela

    "Belur" wrote in message
    news:[email protected]..
    > Can someone clarify if there is anything different that needs to be
    > done while building a stand-alone application that includes VIs that
    > use the MS agent voice VIs (for example MSagentTTS.llb) along with CGI
    > VIs? I have been able to build applications with only CGI VIs but
    > failed while adding MS agent VI functionality. Any help is greatly
    > appreciated.
    >
    You'll need to install the Microsoft Agent parts on the target computer.
    They are:
    MSAgent.exe - the core components
    actcnc.exe - MS Speech Recognition Engine
    tv_enua.exe - MS Text To Speech engine
    Merlin.exe - or any of the available different voices
    Theses are available for downl
    oad from
    http://www.microsoft.com/msagent/downloads.htm

  • Connectiing Java Web Service to Power Builder application

    Hello
    I have to develop an application where i must connect a Power Builder application to java web service.Can any one help me in this matter...My client wants from Power Builder application i should call a .exe..means the parameter from the power builder should go to atfirst to that java exe and from that exe it should call the web application in java...
    Can any one help me in finding the solution?

    hi,
    Java web service builder for java application- Java web service : http://java.sun.com/webservices/docs/1.6/tutorial/doc/
    - builder : I guess you will need a custom class loader => see this
    hope it helps

  • I Can't copy the vi after build application

    I copy the vi and make it run using vi server, it works great in the development environment. But when i build application,
    it seems to can't copy. I know the path of application is different with development environment.  the VI is in a internal.llb of exe.
    I try many ways of copy the vi, and place a indicator on the path of the copy vi, but every time I find it is "not a path"
    Why?

    There are all kinds of differences between LV and the run-time engine, but I don't think they should affect copying of VIs (even built ones). I suggest you post your code so we can look at it.
    By the way, if you what you want is multiple copies of your VI, all you need to do is rename its extension to vit and call it using VI server. A new copy will be created in memory each time you do this with each copy having its own memory space and FP. Search the example finder for VI templates and you will probably find some examples.
    Addition - if you're trying to copy the VI into the exe, that is probably the reason for this as the exe would be write protected when it's running and you can't write into it. You shouldn't change an executable yourself anyway, as I think they're signed and changing them might cause the RTE not to run them.
    Message Edited by tst on 07-20-2006 02:28 PM
    Try to take over the world!

  • Cannot build application with labview 7.0

    I had built application previously using labview 6.X while some of the V.I. are without block diagrams, but I couldn't do that any more with labview 7.0 as a error will be prompted, why is this happening & are there difference in application builder between labview 7.0 and previous version? Must I load those V.I. without block diagrams dynamically now ?

    Unfortunately it is impossible to build application with newer version with VIs without block diagrams, which saved in oldest version.
    from ni web site:
    "National Instruments does not recommend saving VIs without block diagrams because LabVIEW needs the block diagram to recompile the VI after an upgrade. When you upgrade LabVIEW, you must find a version of the VI that includes its block diagram to recompile it. Such a version did exist before the block diagram was removed because it is impossible to create a new VI without a block diagram."
    "Based on that information, it should be clear that once a VI is saved without diagrams:
    You cannot open or run the VI on any other version of LabVIEW, older or newer."
    More information:
    http://digit
    al.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/00a6bacda1c01a0786256b60006163e7?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/28c4cb0cf83e1a1d862566e2007a2a9c?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/fee732f4b1541b9586256bf0006a78ca?OpenDocument
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/0649a3350de20aa186256d91007b3d61?OpenDocument

  • Build Application, installer advanced settings

    Hi !
    I build application with installer(LV70(W2K) and
    I like to run "example.bat" file after when user has run "setup.exe".
    So there is advanced installer settings, "run excutable after installation"
    how i should fill those lines (look attachment)
    Source support file "example.bat" great folders to C:\ root and copy files to C:\
    I allready put destination of "example.bat" file to root
    -HeVi-
    Attachments:
    InstallerAdvan2.jpg ‏34 KB

    I've never tried that option with the installer... do you need to give
    it an absolute path to where your batch file will be?  Have you
    included the batch file as a support file for your installation?
    What about placing the batch file in a directory that's included in
    your system path variable and see if it will run then?  Just a few
    guesses without actually trying it myself... Keep us posted...
    Message Edited by m3nth on 08-04-2005 08:32 AM

  • Build Application

    Hello, I have a vi attached from which I am building an application to install on anther computer without a licence. I am using Labview 7.0 and have installed Run-time 7.0 on the target computer.
    The only problem is that when I try and run the built application on the target computer it doesn't work like the original vi and fails to report errors or save data, or communicate via the serial port which I have built into the vi as it should.
    Is there something I am missing when making a build application from a vi. I use the very basic settings in build application and simply save a build to a certain location and hit build. I do not play with any of the settings in build application.
    Nevica
    Solved!
    Go to Solution.
    Attachments:
    BARA3.vi ‏699 KB

    I understood from your post that you're building an EXE file, right?
    Why don't you build an installer, all needed drivers, dependencies (call it laike you want) will be encapsulated into that installer.
    You can then install your code like any other software.
    Way easier than trying to find out what you have to install besides your exe

  • How builds applications being able to connect whether to ODBC or to CS

    I want to build applications which connect whether to ODBC or to CS with ttclass.
    Can we develop? If we could do these, please tell me how to approach.

    Okay, this is a fairly common 'want'. The simplest way is to have two different binaries, one linked with each library but that does not allow you to control the connection via arguments to the program (at least not at all easily). Unfortunately there is nothing in TTClasses that really helps you here. What you need is an 'ODBC driver manager' which is basically a library which you link with your application in place of an actual ODBC driver. At run time, based on values in the ODBC.INi file, it will dynamically load the correct driver (direct mode, client/server or indeed a non-TimesTen ODBC library).
    If you are on Windows, the good news is that Windows comes with a driver manager included. If you are on Linux (or Unix) there are a couple of open source ones that you can download and build (e.g. iODBC and UNIXODBC are the most common). A third alternative is to write your own; it is not as difficult as you might imagine and will likely perform better than a ready made one. Use of a driver manager will bring some performance hit of course since it adds to the code path of every DB call.
    Chris

  • Using two different VISA functions on build application

    Hello
    I have developed an application that communicates with instruments.
    One instrument is GPIB, and my application communicates with this through a gateway, so Agilent VISA libraries are installed as primary, to perform this.
    Another instrument is USB. When I build the application (.exe) the communication with this instrument is lost.
    Does anybody know what is happening?
    Thanks you all

    Hi Ester,
    When you build your executable, you may need to configure the serial port as part of yuor build.
    Under "Build Application or Shared DLL", go into "Installer Settings", select "Advanced".
    You may have to select "Serial Port Support" and /or "Port IO Support".
    Then build.
    Hope this helps.
    -JLV-

  • Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi- Dist Build LLB Image.vi- Dist Build App Image.vi- Build Application.vi

    When trying to build  an application using labview 7.1 and windows XP,  I get the error
    Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
    I've tried the crtl-shift-run as well as  a mass compile and I still get the error.
    Any ideas?
    Thanks,
    Mike

    Hopefully this thread, or this KB article might help.
    It seems like this could come from a lot of things, but there's suggestions in those which might lead you in the right direction
    Message Edited by Day on 09-22-2006 02:07 PM

  • I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

    I have had to replace a faulty hard-drive on my imac. Some applications (incl iphoto) are telling me that my OSX (10.82?) isnt recent enough to use the application. I need 10.9. I have upgraded to Maverick but this remains the case. Any help?

    If your Mac is from the age of Mac OS X 10.8.2:
    How to find your Mac's model and age?
    Contact AppleCare to request the prebundled iPhoto be uploaded to the Mac App Store, or the Mac App Store support.
    This is just a user to user forum.  This link goes direct to the Apple Store support:
    http://www.apple.com/support/mac/app-store/contact.html?form=account&topic=MacAp pStoreAccountandBilling

  • Error when starting DPS App Builder - Application not found

    WTF folks.
    This morning I open my document (CS5) and it says I have to update my folio tools (needless to say i hate it to be forced to do an update before I can start working).
    Well, I do an update, both tools (Folio Builder and Producer Tools).
    Now there seem to be some changes, I cant refresh my folio via menu anymore. When choosing the new "build app"-option I get an error :
    "An error occured while starting DPS App Builder. The DPS App-Builder Application was not found" (translated).
    German original version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Die DPS App Builder-Anwendung wurde nicht gefunden."
    Any Solutions? Where to get the mysterious "App-Builder Application?"
    edit: refresh is now only possible inside the folio it seems.

    App Builder is nothing but a new name to Viewer Builder. Download it from DPS Dashbaord.

  • How to pass custom cookie from report builder application to SSRS Custom Security Extension?

    We want to implement SSRS in SaaS model. We implemented Custom Security extension in order to authenticate users from other application. When user enters username/password, i would like to authenticate the user in other application and it will return some data which can be used for autherization. I am expecting the same set of data will be accessible during all autherization calls.
    Currently we are implementing this in Report Builder application. I couldn't able to persist the information in cookie. Report builder removes all the cookies exceprt one cookie which is used by report server.Is there any way to share the information in all reportbuilder autherization calls in same session?

    if you have your own data extension, you can using
    HttpContext.Current.Application.Add("yourkey",
    yourdata);
    to save your data, but the issue I met it the key, I cannot find a key depended on report builder. If I use username, if the user open 2 report builder, both of them will get the same key and same data, but at this case the data should be different.
    I hope it will help you.

Maybe you are looking for