To change the comma to the point
I'd like to know if there is the way to change the comma to the point on the keyboard.
thanks
Umberto
Hello,
On the keyboard:
Use this:
http://www.microsoft.com/globaldev/tools/msklc.mspx
or this:
http://www.kbdedit.com/
or this:
http://www.klm32.com/
or this:
http://www.easydesksoftware.com/keyboard.htm
On a program:
Use replace:
report ztest .
data:char(25) value '5#4#2#&1#&',
char1(9) type c ,
char2(4) type c value 'test'.
replace all occurrences of '#' in char with 'and' .
replace all occurrences of '&' in char with 'num' .
replace all occurrences of 'a' in char with char2 .
write: char.
Regards,
Jorge Diogo
Similar Messages
-
How can we remove the commas from the Formula value in SAP BW BEx query
Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards -
I have to guess where the comma is the @ sign is and various signals now tell what am i doing wrong on the apple usb keyboard
Hello
This can be verry usefull
http://support.apple.com/kb/HT2841?locale=en_US
How to identify keyboard localizations
HTH
Pierre -
Where to put the commit in the FORALL BULK COLLECT LOOP
Hi,
Have the following LOOP code using FORALL and bulk collect, but didnt know where to put the
'commit' :
open f_viewed;
LOOP
fetch f_viewed bulk collect into f_viewed_rec LIMIT 2000;
forall i in 1..f_viewed_rec.count
insert into jwoodman.jw_job_history_112300
values f_viewed_rec(i);
--commit; [Can I put this 'commit' here? - Jenny]
EXIT when f_viewed%NOTFOUND;
END LOOP;
commit;
Thanks,
- Jennymc**** wrote:
Bulk collect normally used with large data sets. If you have less dataset such as 1000-2000 records then you canot get such a performance improvent using bulk collect.(Please see oracle documents for this)
When you update records Oracle acquire exclusive lock for that. So if you use commit inside the loop then it will process number of records defined by limit parameter at ones and then commit those changes.
That will release all locks acquired by Oracle and also teh memory used to keep those uncommited transactions.
If you use commit outside the loop,
Just assume that you insert 100,000 records, all those records will store in oracle memory and it will affect all other users performance as well.
Further more if you update 100,000 records then it will hold exclusive lock for all 100,000 records addtion to the usage of the oracle memory.
I am using this for telco application which we process over 30 million complex records (one row has 234 columns).
When we work with large data sets we do not depends with the oracle basic rollback function. because when you keep records without commit itb uses oracle memory and badly slowdown all other processes.Hi mc****,
What a load of dangerous and inaccurate rubbish to be telling a new Oracle developer. Commit processing should be driven by the logical unit of a transaction. This should hold true whether that transaction involves a few rows or millions. If, and only if, the transaction is so large that it affects the size constraints of the database resources, in particular, rollback or redo space, then you can consider breaking that transaction up to smaller transactions.
Why is frequent committing undesirable I hear you ask?
First of all it is hugely wasteful of rollback or redo space. This is because while the database is capable of locking at a row level, redo is written at a block level, which means that if you update, delete or insert a million rows and commit after each individual statement, then that is a million blocks that need to go into redo. As many of these rows will be in the same block, if you instead do these as one transaction, then the same block in redo can be transacted upon, making the operation more efficient. True, locks will be held for longer, but if this is new data being done in batches then users will rarely be inconvenienced. If locking is a problem then I would suggest that you should be looking at how you are doing your processing.
Secondly, committing brings into play one of the major serialization points in the database, log sync. When a transaction is committed, the log buffer needs to be written to disc. This occurs serially for multiple commits. Each commit has to wait until the commit before has completed. This becomes even more of a bottleneck if you are using Data Guard in SYNC mode, as the commit cycle does not complete until the remote log is notified as written.
This then brings us two rules of thumb that will always lead a developer in the right direction.
1. Commit as infrequently as possible, usually at the logical unit of a transaction
2. When building transactions, first of all seek to do it using straight SQL (CTAS, insert select, update where etc). If this can't be easily achieved, then use PL/SQL bulk operations.
Regards
Andre -
How do I Change decimal comma for decimal point
Hello,
I have an external USB keyboard and I don't know how do I change the decimal comma for the decimal point.
I already set my region but anyway I can't change the decimal comma for the decimal point.
thanksThanks for the link, that help me a lot, because now when I'm in excel or a calculator I hit the point key on the numeric part of my keyboard and I get a point, but when I'm in word, safari or entourage and I hit the point key on the numeric part of my keyboard I get a comma instead a point.
I have a windows Spanish ISO extended keyboard.
Thanks a lot for your help -
Error preventing the commit to the database??!
hi ,
i have this form i use to modify a record on the database
i just want to add a date to a certain column but in the browser when i hit the commit
it says
JBO-26080 Error while selecting entity for <name of the table>
i am kind of confused i check the error report site the site that give (very small explanation on the JBO errors) and it says :
JBO-26080: DMLException
Cause: An unexpected exception occurred while executing the SQL to fetch data for an entity instance or lock it.
Action: Fix the cause for the SQLException in the details of this exception.
which is VERY general so if someone could please clear me on this
by the way i am using ADF BC and all the attributes have the updatable set to always
thx carlthx for the reply
yeah it turned out that the squeleton of the table posted on the DB was not the same as the one in jdev
one table has been removed and it was not in jdev
i tried the syncronise with database option but this option does not seem to check for this
why is that?
what exactly is this option syncronising with the DB? if it is not check for changes inside the table
thx carl -
Why can I not use commas in the Author part? They change into semicolons!
I'm just a simple user, not a technician, but you probably are!
Why is it that in CS2 XMP sees the usage of a comma, in the File Info Author field, as a fieldseparator and changes it into a semicolon?
Whilst it does not change the comma in the Author Title!
Since the early versions of Photoshop we fill the Author field (iptc 80) with the name of the photographer like Name, Surname.
Our photomanagement system uses iptc 80 (byline) as photographer field but only shows Name now, instead of Name, Surname.
Anyone of you can explain why we can't use a comma anymore? and when we use a comma it changes into a semicolon.
I should expect that using a semicolon would act as field separator....
Thanks in advance,
[email protected]Are any of you going to the Adobe Developer Conference scheduled to be held for plugin providers at San Jose on Nov 7/8?
-
Sql report on item - problem with commas in the string
I have a simple report that groups all the Job Titles entered on our database.
I pass the job title to an apex item and then on a second page list the records that match that job title using:
and ed.ede_job_title = :P35_JOB_TITLE
If there is a comma in the job title the report returns the records that match the string up to the point the comma appears not the full string.
So 'Project Manager, Operations' matches all the 'Project Manager' records.
Also when there is a leading space in the job title the report displays the jobtitle without the leading space.
Apologies if this is answered elsewhere, I did search.Check the actual URL up in the location bar. Your comma may actually be dropping out there, because it isn't encoded such that in value commas can be differentiated from delimiters, so the fields aren't lining up in the URL properly.
When you go to a page that takes in parameters for assignment in the link, it has 2 fields. The first is the comma separated list of the item names on the page to assign, which wouldn't contain commas in their names. The other field in the URL is a comma separated list of values to be assigned to the previous list. Since these values aren't encoded, the comma in the value is picked up as delimiter and not a part of the value. I have an example I can load up to apex.oracle.com if you need.
-Richard
Edited by: rwendel on Aug 13, 2009 11:51 AM -
Converting the comma seperator value format
i am getting the content of a table in a internal table with comma separator value format, dynamically by using dfies table i am getting the header of the table, and displaying it in the output, now my query is that the content of the data which i am getting in a itab having only one field of type string
data : begin of itab occurs 0,
data1 type string,
end of itab.
some where they were concatenating the content of the data and storing it inthe itab, now i want the content of the itab should be displayed corresponding to there header in the outputHi Santosh,
You can remove the commas from the record by using the REPLACE command as below -
LOOP AT itab.
DO.
REPLACE ',' WITH '' INTO itab-data1.
IF sy-subrc NE 0.
EXIT.
ENDIF.
ENDDO.
ENDLOOP.
Reward points if found useful...!
Cheers
Abhishek -
How can I edit the commas in an index style?
I've set up my Index Style how I want, but I can't find how to edit the size and style of the commas that the index generates to separate page numbers. When I set up the style, the commas now reflect the font I've selected, but they come in at 17pt font and Black instead of regular type.
There does not seem to be a place in either the Style or Index options to change this.You can't in 8i. However you can look at the SQL Text in the SGA looking for anything that matches the table name that the index is for and then look at the explain plan for the selects and updates. Pain in the xxx to do but it should give you the information.
-
Hi Experts,
I need to put the comma in the amount field.
eg: 3000.00 as 3,000.00.
Is there any FM which can do this conversion.
Thanks In Advance
AsishThe best way is type casting.
Ex:
Data: amount(10) Type p decimals 2.
Value = '3000'.
WRITE VALUE TO amount.
Write amount. "3,000
Close the thread once your question is answered.
Regards,
SaiRam -
How to rtrim the extra comma at the end
Dear Gurus,
I am trying to trim the extra comma at the end of the sentence but I am not able to trim it at all this is for cursor loop in formula column trigger. Is RTRIM a rightful command to use here! Any Suggestions.
for c1 in (select crv.x crc
from x table
where crv.x = xyz)
loop
if p_count >= 1 then
v_descr := v_descr||C1.CRC||', ' ;
end if;
end loop;
return rtrim(v_descr,',');
RESULT IS = ' 010, 002, 115, 'Dear,
Instead of using rtrim function, you can get the desired result by adding a code line and placing the comma at the start as below:
(the added code lines are in bold)
if p_count >= 1 then
if v_descr = '' then
v_descr := C1.CRC;
else
v_descr := v_descr||', '||C1.CRC;
end if;
end if;
end loop; -
How can i move the position of the element in Script From ?
Dear Guru ,
I am developing one SCRIPT FORM for the purchase order in ECC6 system .
And i found it is very diffult to move the element position because i am adding the space in the editor for the position moving ...
Please see my stupid code :
/E ITEM_HEADER_F
UL &ULINE(105)&
IL Item Material Description Unit Qty
Price Per Net Value Delivery Date
UL &ULINE(105)&
IL &EKPO-EBELP& &EKPO-MATNR& &EKPO-TXZ01&
&EKPO-MEINS& &EKPO-MENGE& &EKPO-NETPR&
&*T006A-MSEHT& &EKPO-NETWR& &EKET-EEIND&
I thought there must have another good idea to control the posiion of the element in script form editor .
Has someone knew that ?
Thanks a lot .
Best Regards,
CarlosHi Carlos,
Tabs :
You can define as many tab positions as you require for each paragraph format. The text can be aligned in different ways:
u2022 Left-aligned with LEFT
u2022 Right-aligned with RIGHT
u2022 Centered with CENTER
u2022 At the sign with SIGN
u2022 At the comma or decimal point with DECIMAL
You can control the tab feed in a paragraph with tab positions. The tab stops you define in the paragraph format replace the tab spacing you defined in the header data of the form.
The tab stops are represented as, , in the text editor.
Eg:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
/E ITEM_LINE
IL &VBDPA-POSNR&,,&VBDPA-MATNR&,,&VBDPA-ARKTX&
,,&VBDPA-IDNKD& &VBDPA-POSEX&
Regards,
Chandra Kavali -
Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?
Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion. -
in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!
Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
Maybe you are looking for
-
Display PDF on the browser from BLOB column
Hi All, I have BLOB column in the table where we are storing PDFs. I want to display PDF within the browser ( not as a download option) from that BLOB column, like clicking on the "Print" link. Please let me know if anyone has any suggestion. -Smith
-
Double Float Margin Bug "error"
I did a browser compatibility check on one of the pages that I am building and got this error............. "Line 112, Double Float Margin Bug 'error' When a margin is applied to a floated box on the same side as the direction of the float, the margin
-
Solid-state drive v.s 500GB @7200
Core i7, 8 ram, 128GB solid-state drive, 7200 rmp drive... will you help me to prioritize this list... put it in an most money worth order? I am planning for a new 15" pro. I do graphic design... multiple applications open... CS5 (photoshop (manymany
-
I am referring to books in iBooks. I only seem to have access to Free books. This is very frustrating.
-
P2 Question - "Preview unsupported for this format"
Workflow: P2 is dumped onto powerbook, P2 from powerbook is then dumped to internal drives on MacPro. The clip was then brought into the Final Cut P2 viewer to watch. It was a crash clip, so we watched it a handful of times. It was never actually imp