To Change the Program Title when i click second radio button

Hi All,
I have two radio buttons in my report.
1) party wise report ( if R1 = X this will display report )
2) sales wise report ( if R2 = X this will display report )
i declared in report attributes as party wise report .
When i clik sales wise report.
it is coming party wise report,
i want it to be as sales wise report.
Please let me know how to do it.
Thanks in advance
Ramesh

Hi,
Hope below code can give you some idea.
parameters: r1 radiobutton group rad1 default 'X',
            r2 radiobutton group rad1.
start-of-selection.
   if not r1 is initial.
      sy-title = 'Party'.
      Write:/ 'First'.
   else.
      sy-title = 'Sales'.
      write:/ 'Second'.
   endif.
Kind Regards
Eswar

Similar Messages

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

This pertains to Adobe Premiere Pro CS6:
Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
Not sure I yet have the capabibility of providing a URL of the problem.
Thanks for your guidance,
David

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_1.png and I would like to put in something more relevant than just shapeimage?

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?

When you drag images from iPhoto to iWeb, iWeb retains the original filename.
When you use a mask, iWeb creates a png file with the shapeimage name.
So do not use a mask and crop your images before dropping them on the iWeb canvas.
When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
You can use a 3rd party application to create the png images yourself, and give them a proper name.
Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images.

Selection screen to appear when user clicks on radio button

hi
i have severla radio buttor in a radio button group
i want that whne user clicks on first radio butter selection scren 1 eg as below to apper
when use clicks on radio buton2 selection scree2 will appear please suggest
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE
text-008
PARAMETER : fyr2_fy type FIMC-RYEAR default 2008,
fyr2_cg type FIMC-CGYEAR default 2008,
fyr2_bk type FIMC-PERID default 7.
SELECTION-SCREEN END OF BLOCK B1.
regards
arora

Hi,
At selections screen on that radiiobutton group.
if radio_button1-status = 'X' (Active)
call screen 'scereen number' or set screen 'nuymber'.
else.
call screen...
endif.
Reward if helpful.
Best Wishes,
Chandralekha

How to change the Browser title when report runs on the web?

Hi folks,
How to change the title of the browser when I run my report on the web? Iam using Internet explorer and Reports 6i. Is it possible in 6i or 10g reports?
Could you please tell me the step by step procedure ?
Right now the browser is displaying the URL when I run the report with format = PDF.
Thanks.

It works for me. I don't see why you have a problem with >this code.
Can you look at the source code of the html >file that was created (so, not in the browser, but in a >text editor). What do the header and title look like?The Html code in the file is same as the above code I specified. Actually I copied the same code and pasted here. But when I run the html file the Title shows up.
Don't put </html> there. Maybe that helps. I tried this, but it did not work.
Please let me know is there any way to set it dynamically inside the triggers using SRW built_in.
Thanks alot.

Can't change the document title when the browser is opened in dialog mode

Hello experts,
I'm working on a solution which involves opening up another .jspx page in dialog mode. I need to change the title of the dialog browser window dynamically when the user performs a specific action on the dialog page.
Unfortunately, I can't get this to work. I have tried using JavaScript and had no luck. I tested this technique on a non-dialog page and it works fine. Please help.
Here is the markup code for launching the dialog page:
<af:activeCommandToolbarButton id="actbPreview"
icon="/graphics/previewscreen_enabled.gif";
text="Preview"
action="dialog:weCreate"
useWindow="true"
windowHeight="620"
windowWidth="1120"
disabled="#{empty bindings.MapElemUnqId.inputValue}"
launchListener="#{backing_weQuery.launchPreviewerListener}"
binding="#{backing_weQuery.actbPreview}"
returnListener="#{backing_weQuery.returnPreviewerListener}"
clientComponent="true"
windowModalityType="applicationModal"
windowEmbedStyle="window"
disabledIcon="/graphics/previewscreen_disabled.gif";/>
On the dialog page, here is the markup and javascript for setting the browser window title:
<af:commandButton text="title" id="cb10">
<af:clientListener method="setWindowTitle"
type="action"/>
</af:commandButton>
function setWindowTitle(actionEvent)
actionEvent.cancel();
var doc = AdfPage.PAGE.findComponent("d1");
doc.setTitle("TEST");
alert("Title="+doc.getTitle());
}

Thanks for your response.
I tried that and I could not get it to work. Even though I can set pageFlowScope.pageTitle dynamically, the browser window title does not refresh (I tried to refresh via PPR and full post back).
here is my code:
public void setPageTitle(ActionEvent actionEvent)
RequestContext requestContext = RequestContext.getCurrentInstance();
Map pfs = requestContext.getPageFlowScope();
pfs.put("pageTitle","TEST 2");
RequestContext.getCurrentInstance().addPartialTarget(this.document);
public void setPageTitle(ActionEvent actionEvent)
RequestContext requestContext = RequestContext.getCurrentInstance();
Map pfs = requestContext.getPageFlowScope();
pfs.put("pageTitle","TEST 2");
FacesContext context = FacesContext.getCurrentInstance();
String currentView = context.getViewRoot().getViewId();
ViewHandler vh = context.getApplication().getViewHandler();
UIViewRoot x = vh.createView(context, currentView);
x.setViewId(currentView);
context.setViewRoot(x);
}

How to stop the Flex application when user clicks on Cancel button from JS-confirm message?

Hi All,
I use the next code when a user clicks on a link:
private function clickHandler():void
      ExternalInterface.call('confirm', 'Of course you want to go to the Adobe forums!');
      navigateToURL(new URLRequest('http://forums.adobe.com'), '_self');
This will show up the javascript confimation box. But when the cancel-button is clicked, the user goes straightly to http://forums.adobe.com...
How to stop Flex performing the next code when a user clicks on the Cancel button?
Or, how to catch which button is clicked by a user in Flex?
Thanks!

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

I cannot upload documents w/Firefox on GoDaddy's FTP (no problem 3 wks ago). I can delete/change the name, but when I click the upload icon my cursor displays the universal "no" symbol. I CAN still upload using Safari.

Using Firefox 7.0.1 on an iMac w/Snow Leopard 10.6.8
Made no upgrades (unless automatic and didn't notice) or Preferences changes in the last couple of weeks - downloaded files with no trouble just before that

Yes,ranchers, I did try that a bunch of times- thanks for trying.
I'm gonna list all the things I did (that I can can think of):
Tried to force close the app.
Turned on/off wiFi
Tried letting it just run on the screen it's stuck at for like 15 minutes
Ugh...my brain is turning off-I think it's frozen like my Sims! Cornball I know.
But I've tried everything I could think of which is a bunch more things than what I was able to list. And I'll do my best to answer any questions cause I know from looking all over on different forums that I'm not the only one this is happening to. It happened to a bunch of people who I think are still waiting for theirs to get fixed.
Can the cloud save me if I upload today?

How to control what VoiceOver says when clicking a radio button in Safari?

Hello-
I am developing a web page that I want to work in Safari & VoiceOver. Does anyone know how I can:
1) control what VO says when it is hovering over a radio button (ideally some alt text or title attribute)
2) control what VO says when I click a radio button in Safari (right now, it seems to say 'Group').
I have tried to put the radio buttons in a fieldset, tried tons of attributes in the input tag (including alt, title, desc, description), but nothing seems to change.
Here is a URL where you can hear what I'm talking about: http://postcalc.usps.gov/
Turn on VoiceOver (try Cmd+F5), pull up the URL and hover over the 'letter' or 'large envelope' radio buttons, then click one of them. It says 'group'. I'd like it to say 'letter option selected' or something.
Thanks for any & all help!
Seth
PS: I do know about the <label> tag. I've tried surrounding my <input> tag with a label and using <label for="someID">, but it doesn't seem to help.

Thank you for the suggestion...it does work and fires the event, but it is still not selecting the current record when I try to perform an Update or Delete.
I had to modify your code a bit in order for it work in JDev 10...used the JUCtrlValueBindingRef instead of the FacesCtrlHierNodeBinding.
Here is what my af:table tag looks like:
<af:table value="#{bindings.FeesView1.collectionModel}"
var="row" rows="#{bindings.Fees001View1.rangeSize}"
first="#{bindings.FeesView1.rangeStart}"
emptyText="#{bindings.FeesView1.viewable ? \'No rows yet.\' : \'Access Denied.\'}"
selectionListener="#{backing_viewFees.tableSelectOne1_attributeChangeListener}"
binding="#{backing_viewFees.table1}" id="table1">
If I put back my 2 original attributes, then my Delete and Updates work.
selectionState="#{bindings.FeesView1.collectionModel.selectedRow}"
selectionListener="#{bindings.FeesView1.collectionModel.makeCurrent}"
Here is my code in the backing bean:
public void tableSelectOne1_attributeChangeListener(SelectionEvent selectionEvent) {
JUCtrlValueBindingRef binding = (JUCtrlValueBindingRef)this.getTable1().getSelectedRowData();
if (binding != null) {
Row currentRow = binding.getRow();
if (currentRow != null) {
System.out.println(currentRow.getAttribute("CurrentRecordInd")); // this does print my selected value!!!!
}

Not able to see No of BP records in a profile when I click on Count button

Hi All,
We are working on CRM 5.0, BP segmentation.
We have created a Attribute list which is the combination of Infoset and Attribute Set.
Now we want to build the profile in Segment builder by using Attribute list.
I created a profile ( using the filters of attribute set and Info set) I am not able to see the BP records when I click on count button by selecting the corresponding profile.
But When I have created defferent profiles by using the filters of attribute set and info set seperately I am able to see the no.of BP records when I click on Count button for the corresponding profile.
Can anybody advice me what is the reson for that?
and I want to see the No.of BP records for the profile which is build with the combination of attribute set and Info set.
Thanks in advance.
-Madhu.

Hi sachin,
I am extremely sorry to keep this thread as open. This problem is already solved.
I have used table views in infoset to get the data which is coming from multiple tables.
Regards,
Madhu.

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

How do I enable my iTouch? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iTouch? Thanks.

How do I enable my iPod? I am trying to update the apps but when I click "Update All", a pop up "Your Apple ID has been disabled." How do I change it so I can enable my iPod? My iPod is not locked (I know my password), but I just can't figure out how to enable it. Thanks.

This may help:
http://support.apple.com/kb/ts2446

I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked

I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked on the link it actually sent me to a page that had the icon to download now. I clicked on that, but when I went to open the file and start downloading after about 3 minutes into downloading it says an error had occurred. Can anyone help me?

I am a little worried. If you are an existing subscriber why would Adobe need you to download... I wonder if the message is a fake.
I'm not clear, if you've had it for a year, whether you need to download, or you are just following the email?
This page with the icon to download now. Was it a page on adobe.com ?

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

To Change the Program Title when i click second radio button

Similar Messages

Maybe you are looking for