To collect small slices into a secondary, callout pie chart in SSRS 2005

Hi Guys,
There exists a property in pie chart in SSRS-2008 which can consolidate the small slices on pie chart. But I am unable to find the same property in SSRS-2005.
Is this property only available in SSRS-2008 ? If yes how can we achieve the same functionality in SSRS-2005 Pie Chart ?
Regards
Consolidating Small Slices on a Pie Chart
Consolidating Small Slices on a Pie Chart
Consolidating Small Slices on a Pie Chart
Consolidating Small Slices on a Pie Chart
Consolidating Small Slices on a Pie Chart

Hello,
Based on my research, the CollectedStyle property that collect small slices into one signal slice or a secondary, callout pie chart is available from Reporting Services 2008. So it is not supported in Reporting Services 2005.
For example, you are using the query below to return the SECTION and DIVISION fields as the chart fields: SELECT SECTION , DIVISION FROM TEMP, and you want to collect small slice COUNT(DIVISION) smaller than 5 as the callout pie chart. To work around this
issue, we can create two charts on the surface, one as the big and collected slices chart, another one as the secondary, callout pie chart. For more details, please refer to the following steps:
We can use the query with some conditions like below to return the fields for the main chart:
SELECT CASE
   WHEN COUNT(DIVISION) <= 5 THEN 'Other'
   WHEN COUNT(DIVISION) >5 THEN SECTION
   END AS SECTION, COUNT(DIVISION) AS DIVISION
FROM TEMP
GROUP BY SECTION, DIVISION
We can use the query like below to return the fields for the callout pie chart:
SELECT CASE
      WHEN COUNT(DIVISION) <= 5 THEN SECTION
   END AS SECTION, CASE
      WHEN COUNT(DIVISION) <=5 THEN COUNT( DIVISION)
   END AS DIVISION
FROM TEMP
GROUP BY SECTION, DIVISION
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Pie Chart slice breakup

Hi Experts,
I am having a requirement in OBIEE 11g of showing data as Percentage in a Pie Chart,the chart will be be having two slices(SLICE 1, SLICE 2).
And the SLICE 1 breakdown needs to be displayed as STACKED BAR CHART.the bar chart should also show data as percentage.
I am using a common measure for both the charts, in PIE CHART i have shown the measure count as Percentage,But in Staked bar chart i am not able to show the data in percentage.
A SLICECODE column i am using for the SLICE 1 and SLICE 2 breakup in the PIE CHART, and in the BAR CHART i am showing only SLICE 1 data by placing the SLICECODE column in the Section, and set the "Maximum number of section slider values" as 1 in the section properties
.Plz suggest me how to show the data as percentage in the bar chart
Refer the link below for the image.
http://img577.imageshack.us/img577/2631/waiver.jpg
thanx in advance.

The image given uploaded in the link in my below post is the required report output.

This regards Adobe Reader XI 11.0.07 and Adobe Acrobat Pro XI 11.0.07 running on Win 7. Copying text in a text callout (to paste into a text callout in another pdf document (3 instances of Adobe open) sometimes (only sometimes) causes the program to crash

This regards Adobe Reader XI 11.0.07 and Adobe Acrobat Pro XI 11.0.07 running on Win 7. Copying text in a text callout (to paste into a text callout in another pdf document (3 instances of Adobe open) sometimes (only sometimes) causes the program to crash, losing unsaved work. Windows Task Manager shows only a small percentage of cpu used and plenty of memory available. What is causing this?

scholtzkie wrote:
"Please wait...If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade ... For more assistance.... Windows is either a registered trademark...."
This usually occurs if you use a browser that uses its own PDF viewer, not the Adobe Reader plugin; see http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Please insert cs3 master collection disc 1 into drive

i'm unable to install cs3 master collections on my win xp.
i keep getting "Please insert cs3 master collection disc 1 into drive E\ to continue installation".
i downloaded this straight from adobes website.
the adobe cs3 folder resides on my desktop.
my current config:
win xp
2 gigs
intel core 2 duo
win service pack 2
i searched extensively on both google and the adobe forums and didn't come up with anything solid to resolve this issue.
any help will greatly be appreciated.
thank you

Call Adobe. Installation issues are handled free of charge.
Bob

Collecting ABAP's into Transport Request

Guru's
I have about 100 ABAP Programs that start with ZC* these are all transported into Q system. But now due to technical reasons we are collecting Individual objects into different Transport requests to import into our Q & P systems respectively... Collecting Infoareas,DSO's,Cubes, and etc.,. had been quite easy.
Now the issue : Is their a possibility that I can collect all the ABAP's in one shot and these should include the dependencies (Tables;FuMo's) etc.,
A tip in this regard would be highly appreciated.
Regards
BVPK

Hi BVPK
I think there isn`t such a easy way you want to go.
But I`ve got a little work around to make it easier (I hope)
Call TA: SE03 --> select "search for requests --> press F8
Next screen, pres F8 again --> select/create a transport request -> press (Ctrl+F11) "include objects"
select "free choosen Objects" (sorry, it`s a german language system here) and enter.
--> now tyoe in the paket, your allready transported objects are assigned to --> F8
Now you got a stuctured list with all your components. You can mark (F6) every single entry you need and include all the marked in your selected transport request.
Hope this helps a little bit
Greets
TOM

Hi! I'm from Brazil and I'm having troubles with subtitles. Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

Solution found.
I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
DO NOT INSTALL VODAFONE APP FROM THE APP STORE.

I cannot save after I place a small jpeg into illustrator CS6.

I cannot save after I place a small jpeg into illustrator CS6.

hey Jacob-
So I've tried creating a new document and pasting all of the artwork in that document. Nothing changed.
I checked all of the jpeg's I'm working with, resized some or made smaller etc. At this point I'm seeing no issues with the jpegs
and the illustrator file I'm working with....no stray points, did a clean up.
It's the action of saving the informatin to the file. The spinning beach ball appears....forever. Weird, because I just had a job where I was
doing the exact same action and had no issues.
I also re-down loaded all of the jpegs. I'm recieving these from a dropbox folder, copied to my dropbox folder. I use dropbox to receive
files daily so I don't think that's the problem but maybe there is a problem in the transfer???
I have a call into Adobe at this point. Tomorrow I will recieve a call from their tech support.
Thank you for your help thus far and if you have any other suggestions I'm open to them.
Martha

How to combine rows with small numbers into single "other" row?

How can I combine rows with value 6(for example) or lower to single row representing the SUM of all this values and label OTHER, so the pie chart will have a chance to display all small values combined?
I'm using Numbers 09

HI Peter,
When you write a decimal number, is the decimal separator a period ( . ) or a comma ( , )? If it's a comma, then the syntax error can be corrected by replacing the list separator in the formula, a comma in Jerry's formula, with a semi colon ( ; ):
=SUMIF(B; "<6"; B)
(Added): The two Bs appear in blue 'lozenges' in Jerry's image because that is the way cell (or column) references are displayed in Numbers when a formula has correct syntax.
Regards,
Barry
Message was edited by: Barry

Collected Tooltip does not display in SSRS 2008 or SSRS 2008 R2 on a pie chart

I've tried everything I can think of, but setting the Custom Property "Collected Tooltip" for a pie chart where there is data that will be "collected" into an "Other" slice doesn't appear to work. I am using SQL Server 2008 and SQL Server 2008 R2,
and neither one seems to display the collected tooltip. I have no difficulty getting a tooltip to appear for all the other slices in the pie, using the series tooltip property. I've searched this forum as well as Google, and the
only things I managed to find with any reference was one page that shows you where all those custom attributes are and how to use them. Is there a bug here, or am I doing something wrong?
Steve

Hi Steve,
I have reflected the issue to the product team, and confirmed this known issue possibly would be fixed in the next release.
If the issue is urgent to your business, it is recommended that you contact Microsoft Customer Support Services (CSS) via telephone so that a dedicated Support Professional can
assist you in a more efficient manner. Please be advised
that contacting phone support will be a charged call. However, it will be free if this is a product issue.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see
http://support.microsoft.com for regional support phone numbers.
Regards,
Tony Chain
Tony Chain [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Pie Chart Callouts Remain After Updating DataProvider

I have a Pie Chart with an Array Collection as the
dataProvider. When I update the dataProvider, however, the Pie
Chart callouts are not always displayed correctly. I basically have
a form where a user can enter percentages of catregories, and the
percentages are displayed in a pie chart right next to the form.
When I update a value from zero to some positive number, the
category is displayed in the pie chart correctly. But, when I
update that value back to zero, the callout labels get funkified.
For instance, sometimes one label is displayed twice, or if there
is only one category filling the pie chart (100%), the previous
callout labels are still displayed. I debugged and found that the
underlying ArrayCollection values are correct, but it seems the
series is not reflecting the values in the Collection. Any ideas
how I can fix this?
Thanks.

Sure! Here you go. Simply edit any of the "value" values to
be zero, and you will see what I'm talking about. Do it multiple
times and it gets worse and worse. I'm using SDK 3.2.
I'm starting to think this is a bug.

Getting the field value of a clicked on pie slice in a pie chart?

I have tried and searched for hours and can not get this
simple little thing to work.
I have a pie chart with the following event handler:
itemClick="chart_click(event)"
The pie series comes from a simple httpservice that has a
country and a count:
<mx:PieSeries
field="count"
nameField="value"
labelPosition="callout"
calloutGap="5"
labelFunction="display"
showDataEffect="{interpolate}">
All I want to do is capture the value of the nameField (EG:
Canada)
I have no problem getting the index of the selected series
but I can not get the nameField value of that slice. This is what I
have:
public function chart_click(e:ChartItemEvent):void
Alert.show(searchByPieChart.series[e.hitData.chartItem.index].nameField);
All I get is the string "value" which is the name of the xml
tag bound to the nameField. What do I need to do ?

Uggg.
I got it:
Alert.show(e.hitData.item.value);

Pie chart from Largest slice of another pie chart.

Greetings!
I'm trying to come up with a method which will allow me to create a pie chart of the subgroups from the largest slice of an existing pie chart. The "parent" pie chart will change depending upon the parameters given in the report.
declare @dataTable table (category varchar(10), task varchar(10), timeSeconds int)
insert into @dataTable (category, task, timeSeconds)
values
('Alpha','Scrub',100),
('Alpha','Sweep',100),
('Alpha','Polish',100),
('Bravo','Wash',200),
('Bravo','Dry',200),
('Bravo','Fold',200),
('Charlie','Paint',300),
('Charlie','Sand',300),
('Charlie','Spackle',300)
In this example, when a pie chart is produced, Charlie would have the largest slice. I then want to produce a pie chart showing only the tasks contained within the Charlie category, but which has the flexibility to render if the Alpha or Bravo groups are
the largest slice next time.
Thanks

For anyone else attempting the same thing: I wound up bringing in a reference to the largest slice using a subquery in the initial query, and using that column as a filter on the second pie chart.
I was hoping for a solution from within SSRS itself, but settled on that. I'll leave the question open in the hope someone knows how to achieve the same result from within SSRS.

Saving individual 3D pie chart slices

I want to create an animated pie chart...with individual slices appearing one at a time. I will do the actual annimation outside of Illustrator (likely in Flash or Motion). The question is...after making a pie chart, can I save each slice as an individual graphic within Illustrator CS4? Thanks in advance.

Yes you can create an art board for each slice you can pull them apart with the direct select tool.
You can the export them as individual files in a variety of ways.
However this is the kind of thing you can do straight from Illustrator by releasing the art to a layers to a sequence and exporting as a swf and bring that into flash. You can also choose the option to save the Illustrator layers as flash symbols and simply import that file to the Flash Library.

Reporting Services in 2005 Secondary Pie Chart?

Hi,
In 2008 and 20012, secondary pie charts with a percentage threshold from a main pie chart can be easily created. Is it possible to do in 2005?
*CustomAttributes
Thanks.

Hi Robb,
It seems that you are using Dundas Chart Control for SQL Server 2008 R2 Reporting Services not the Dundas Chart Control 2005 that Microsoft has purchased.
Microsoft purchased the license to use Dundas Chart Control 2005 in Reporting Services 2008 and above. Therefore the supported upgrade is from Reporting Services 2005 Dundas Charts to SSRS 2008 (R2) and SSRS 2012 Charts.
If you are using a particular component released by Dundas for SSRS 2008 R2, you won’t be able to upgrade Reporting Services 2008 R2 Reports with Dundas Charts to Reporting Services 2012 Charts.
To confirm this, please check the details of this assembly “DundasRSChart.dll” located under the /Report Server/bin directory.
If the Product Name is “Dundas Chart for Reporting Services 2008 R2”, it indicates that this is a new version of Dundas Chart for SSRS 2008 R2 (i.e. a third party control). If the Product Name is “Microsoft SQL Server”, it indicates that this is the version
that Microsoft has purchased.
In this condition, you have to migrate the DundasRSChart.dll to the SSRS 2012 instance and reference it as the custom assembly in the reports. Please make sure to rename the DLL file so that it won’t replace the native DundasRSChart.dll installed by SQL
Server 2012.
For more information about referencing custom assembly in a report, please see:
Using Custom Assemblies with Reports
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

How do I link to a table from a slice of a pie chart?

My project manager is after me to add a feature to a pie chart built on one of my tables. The code that selects from the table for the pie chart is this:
select 'http://apexdevapp1.ci.raleigh.nc.us:7777',activity_type,count(ID) total FROM eba_ver2_cust_activity
where ACTIVITY_DATE BETWEEN NVL(TRIM(:P23_START_DATE), '01-JAN-2001') AND NVL(TRIM(:P23_END_DATE),
'31-DEC-2099')
group by activity_type,'http://apexdevapp1.ci.raleigh.nc.us:7777';
She wants to be able to click on a slice of the pie ("activity_type") and link to another page showing a report limited to that activity_type, selected from the same table. I know how to link from one interactive report to another, but I don't know how to do it from a slice of a pie chart. Does anybody know how?
I'd appreciate some guidance on this.
Steve the n00b in Raleigh NC

Denes Kubicek wrote:
Have you compared that link with any of your apex application links in the browser? ;) :)
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------I may be missing the point of your question, Denes, but all my links are implemented from the Link Column section under Report Attributes. They are not mentioned anywhere in the Select statement, unlike yours.
Steve "the n00b" in Raleigh NC

To collect small slices into a secondary, callout pie chart in SSRS 2005

Similar Messages

Maybe you are looking for