To display "modified" by and "modifed date" and the end of every sharepoint page
Hi there,
I want to display
"modified" by and "modifed date" and the end of every sharepoint page and I have as many as 2000 pages
I have the code for it as below which I have placed in my master page
<SharePointWebControls:DateTimeField FieldName="Modified" EnableViewState="true" Visible="true" runat="server" ControlMode="Display"/>by
<SharePointWebControls:UserField FieldName="Modified By" Visible="true" runat="server" ControlMode="Display"/>
The problem is I am not understanding under which div should I place it to be able to see it at the end of the page.
Please suggest.
Hi,
According to your description, my understanding is that you want to insert the two fields at the end of the page by inserting the corresponding controls into the master
page.
The figure below will show how to insert code into master page:
At the end of the page, it will be:
Thanks,
Dean Wang
Similar Messages
-
Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity -
Hello everybody
I'm with a doubt.
I got in the business
environment Project Server 2010 and
would like to get the publication date,modification
date and name
of the person who made
the last change in
the project. It is possible
to doby the native
resources or is
there any query in
SQL Server to perform a
query of this information.
Thank you.
Obrigado por contactar o fórum Microsoft Technet!Hi Hezequias,
You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
get the data based on the projectUID.
The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
For the "last modified by", I think it is not stored in any place.
But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
date and username automatically into a custom enterprise field.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Mac Does Not Retain Video Creation and Modification Dates
I seem to have encountered a major problem for managing videos on the Mac. There does not seem to be a method - other than manually dragging files "Windows Style" - for moving videos from my camera (any camera) to the Mac (any Mac) that retains the video's modification date (the date the video was taken) so that videos can be organized by date (which, I imagine, is the primary way that I and everyone else would normally keep track of their videos). iMovie resets the "Date Modified" and "Date Created" data to the day that iMovie imported the file. That data is almost meaningless. Yes, iMovie allows for modifying the "Clip Date and Time" after the fact and one at a time but that is obviously inadequate for the serious management of archived files. Neither iPhoto or Image Capture seem to be capable of touching video files at all. Is Mac really this deficient for managing video files? Somebody please tell me I'm wrong. Thanks.
I run into the same problem while working on some sort of file synching task.
Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
Maybe the File.applicationDirectory has different rights?
Does anybody have a solution or workaround for this? -
Creation and Modification dates for android file system
Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;
var file:File=File.applicationDirectory.resolvePath("amf.js");
var modDate:Date;
var createDate:Date;
if(file.exists)
try
modDate=file.modificationDate;
credDate=file.creationDate;
trace("Modification date: "+ modDate.toString()+"\nCreation date: "+credDate.toString());
catch(e:Error)
trace(e.message+": Somehow android OS CANNOT READ mODIFICATRION AND CREATING DATES FOR FILES");
Every time i run this on Adobe AIR's Mobile emulator, the correct dates are show up properly(Possibly because the emulator is running on Windows) but when i switch the debug to the device, the statement in the catch block executes. The real error says "Error #3003: File or directory does not exist."
Am i missing something or is this a normal behaviour which i have to find a work around for? The modificationDate and the creationDate are all properties of the FileReference class which i didnt use to instanciate the file object because i wasnt uploading or downloading anything.
Any form of tip will be much appreciated.
Thanks.I run into the same problem while working on some sort of file synching task.
Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
Maybe the File.applicationDirectory has different rights?
Does anybody have a solution or workaround for this? -
How to capture file modification date and time over the web
HI!
I am creating a web based application and I am using webutil package for al lot of my work being that I ma working with renamin,deleting and uploading files for a users machine to the database. There is one functionality thing that I have to do in this application that webutil does not take care of and that is capturing the modification date and time from a file on the users machine. Please help me capture the date and time of a file on the users machine.
Thanks!Since webutil allows you to write file on client PC directory, then you first create a directive file, then host that directive file. the directive file content is just the command lines when you manually do it on PC.
Refer the ideas--just the ideas not the same built-ins in this URL:
Hyperlink in forms -
My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?
Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy -
From and To Date in the report
Hello friends,
Can we display the From Date and TO Date in the report heading (not in the column) which is entered by the User.hi,
Hey u use Replacement path variable for this.
in the new selection which u have created while writing the description/name of it use the replacement patgh variable and u will get the user entered dfates.
eg.
purchases &Replacement_path_variable&
then the column heading would be
purchases Mar 2008.
regards,
VJ -
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?
Restore it using the computer you normally sync with.
-
Get-Content and add Date and Time in a new file
Hello,
in a existing file I have data like:
1;Idle
5;chrome
1;spoolsv
Now I need to grab the content and add date and time in front of each line and save it to another file like:
07.04.2015;10:18;1;Idle
07.04.2015;10:18;5;chrome
07.04.2015;10:18;1;spoolsv
But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
GreetingsHello,
If you need a new file with the desired output try this
get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
regards,
V
Venu -
Keychain problem and "Set date and time automatically"
Something very strange appened to me today. I spent a few hours to get it through.
All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
Sorry for my English (I'm from Italy).
Someone got the same issue?That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
Would you mind double-checking the following setting, using the AirPort Admin Utility?
AirPort Tab - Base Station Options: Logging/NTP
- Set Date & Time Automatically: time.apple.com (checked)
Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router? -
When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - PatI have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks
-
when attempting to format region and set date and time the busy icon appears and seems to stay like this?
Click on DU's Partition tab when you have the raw drive name selected, then set it to one partition, Mac OS Extended. If it crashes or freezes, it is finding a bad block and can't write.
In any event, if you want to use the drive, and have not zeroed it before, you should now.
Click on Erase -> Security Options -> Zero out data. Still with the full drive selected and not any partition(s).
Then repartition the drive if needed.
Boot from the DVD if that doesn't work. And no, TTPro has never mapped out bad blocks let alone create partitions.
Disk Utility in 10.4.8 is quite good, excellent in fact. No need for an alternative.
Your eMac drive may need to touch of Disk Utility itself. FSCK from the command line, clear the caches with Applejack along with check for corrupt plists. Between Disk Utilty and Applejack (free/shareware) never had to use TechTool Pro - or at least there weren't any errors after those two got done. But if you want a good 3rd party, pick up Disk Warrior 4. -
I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?
I don't think so. When you open iTunes, go to "Store" on the top and click "Authorize this Computer." Type in your email and pass, and click authorize. Then, when you connect you iPod for the first time, it should tell you "this iPod is synced with another computer, blah blah." It should give you the option to either "Erase and Sync," or "Transfer Purchases." Click "Transfer Purchases and your content should go into your new iTunes.
If this doesn't work and you still have your old computer there's another thing you can do. I know this works on windows, but I'm not sure how to do it on a Mac, maybe someone can offer some help. Assuming you have Windows, go to Start>Music>iTunes Media and you should see Music, Apps, Movies, etc. This is all the stuff in your iTunes. If you have an external hard drive or your iTunes library is small in terms of file size, you can do this in one go. Transfer the content (as much as you can fit at one time) onto the external storage. Then, put that content on your new computer on the desktop or somewhere where you can find it again. Open iTunes, and folder by folder highlight everything in the folder and drag it into the iTunes library. It should say "importing (content)" or something and then it should be in your library. If you look in your Music folder again, there should now be another "iTunes" folder there with all of your content back in it.
Hope one if these options works for you. Best of luck!
Maybe you are looking for
-
Problem in using client_image.read_image_file
Hi all I want to load a picture file into a forms item at Develeoper Forms 10g Rel.2 with the following procedure, but it doesnt work and i also get no error. PROCEDURE import_image IS vFileName VARCHAR2(512); BEGIN -- Transfer Picture from File Dire
-
Yellow Screen (Even with 2.1)?
I got a replacement yesterday and it has a bright pixel, a lot of light leak and a VERY yellow/brown tinted screen. The black looks washed out and grays look brownish yellow... Is this a known issue? Do you need to downgrade to 2.0 to fix it? Is this
-
Need to change name on Track Changes
I purchased this MAC all-in-one from my nephew, and although he has deleted his name as the owner, his last name keeps showing up as the person who makes suggestions in Track Changes. I need to eliminate him and add my name, but I can't figure out h
-
HI ALL, I AM IN ABAP-HR. I HAVE 3 THINGS 2 ASK MY FRIENDZ.. 1). I WANT TO ENHANCE STANDARD INFOTYPE... I WANT TO PUT ADDITINAL FIELD WITH DROPDOWN... I CAN PUT ADDITIONAL FIELD BUT I DONT KNOW HOW CAN I DO WITH DROPDOWN... 2). OTHERTHING I WANT TO CH
-
i have a 4th gen 32gb ipod touch but no matter what i do my ipod will not download the iOS 6.1 update. it stops right in the middle of the download ,what should i do?!