To display multiple BOMS by selection

I'm trying to avoid havig to create a report to collectively display multiple BOMS by selection (eg MRP controller, group of header materials etc) to satisfy the following:
- collective display
- multi-level display (indented)
- factor scrap, giving component qtys as per base qty of BOM header
Trans CS11 provides this info, only on an individual BOM basis.

Hi,
Can explain your query a bit more in brief?
Thanks
Kathir~

Similar Messages

  • How to display multiple prompt values selected, in the report

    Hi,
    I have a LOV : SELECT DISTINCT CO.V_MOVEMENT.ORIGIN_BRANCH_CODE FROM CO.V_MOVEMENT ORDER BY 1
    and a parameter associated with it which is multiple selection enabled. The parameter name is P_BRANCH.
    When I am displaying P_BRANCH at the top of my report (RTF), it's showing only one value whereas I need to display all the selected value as Comma Separated.
    Please help.
    Thanks & Regards,
    Antara

    The other option to fetch all the selected values to the report (RTF) is to create a dataset for the field and in the template create a repeating group for each value.
    Eg:
    1) The SQL is : ( In SQL Server, where :P_S_ORIGIN_BRANCH_CODE is Prompt )
    SELECT DISTINCT
    :P_S_ORIGIN_BRANCH_CODE as P_BRANCH
    2) XML is :
    <DATA_DS>
    <G_1>
    <P_BRANCH>RTM</P_BRANCH>
    </G_1>
    <G_1>
    <P_BRANCH>ABC</P_BRANCH>
    </G_1>
    </DATA_DS>
    3) In report we can display the values as below:
    RTM,
    ABC
    But The Required Output in RTF is : (Values seperated by ",")
    RTM, ABC
    Your help would be highly appreciated.
    Thanks & Regards,
    Antara
    Edited by: user450412 on Oct 10, 2011 4:11 PM

  • Display multiple choice column selections on a separate line in the body of email

    This question could have been answered elsewhere and I just don't realize it. I have a SharePoint Foundation 2010 form (11 columns) that has one choice column allowing the user to select multiple options (checkboxes). The selections have been typed into "type each choice on a separate line". Moving to Designer we have created a workflow that sends an email when the user submits to form.
    If Current Item: Select shift equals DAY request    Email ................
    The body of the email has this field:
    Information Being Requested: [%Current Item: The following information is being requested%].
    When the user gets the email the output for this field is string on a single line separated by a comma. What I need is each of the selections to be on a separate line so the users can easily read what is being requested and not miss any of the selection. I'm stuck. I'm not worried about text wrapping. I've been searching for hours but either it's not what a need, it's over my head, or I just don't know where to make the changes. I don't use VS but I do know html and I'm fairly comfortable in Designer. I would appreciate any help.

    Firstly, can you edit your post and take the question out of the code / quote box. It'll make it easier to read.
    Secondly the options depend on the version of SharePoint.  Are we to assume you're using SharePoint 2003 or 2007 as you've posted into the legacy forums?
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • How to display multiple categories of webapp items in list view? Changing listbox list to checkbox list to select category in submission process?

    Hello!
    1.
    I am trying to get my page to list webapp items that are part of a few categories. I understand that if i want to view only one category, I just need to do the normal process of choosing that category and placing it out. So my question is: How do I display multiple categories of items in a webapp in a single page. I've tried this
    {module_webapps,WEBAPP_ID,c,CATEGORY_ID1,,,,10,,1} {module_webapps,WEBAPP_ID,c,CATEGORY_ID2,,,,10,,1}
    This only displays the everything from the first category, then everything from the next, which will not make it in order of date.
    I've also tried this for fun:
    {module_webapps,WEBAPP_ID,c,CATEGORY_ID1&CATEGORY_ID2,,,,10,,1}
    How can I go about doing it?
    2.
    I am looking to allow users to input a webapp item and allow them to select a category to tie to that item.
    <label for="CAT_Category">Category (You may select more than 1)<span class="req">*</span></label>
        <select name="CAT_Category" id="CAT_Category" class="cat_listbox" rows="4" multiple="multiple" style="height: 60px;">
        <option value="CATEGORY_ID1">--- Option 1</option>
        <option value="CATEGORY_ID2">--- Option 2</option>
        </select>
    Is it possible for me to change the listbox style into a checkbox style such that the user doesn't have to control+click multiple options?

    No answer to No.1 but I really want to find it out too.
    No.2 
    If you already know list of the categories & ID you can manually create a list of checkboxes
    <input type="checkbox" name="CAT_Category" value="89081" />
    <input type="checkbox" name="CAT_Category" value="89082" />
    <input type="checkbox" name="CAT_Category" value="89083" />
    something like that should work

  • Display multilevel BOM for multiple materials

    Hi,
    I am to trying to display multilevel BOM explosion for multiple BOMs valid to custom date. Then I would like to export this list of all components to Excel.
    Best solution would be if to create QuickView to do this.
    So far I have been able to Join tables MAST - STPO, this shows me only one level of BOM (sort of like CS03 transaction) not a multilevel view (CS12). Is it possible to modify this to display multilevel view?
    Thank you,
    Tomas

    Dear Thomas,
    in order to have a multilevel Bom explosion you must use only fm : CS_BOM_EXPL_MAT_V2 because you won't succeed to have a multiplevel with a simple query.
    I advise you set MEHRS = X for active multilevel logic.
    Let me know if i have been useful for you
    Daniele

  • Multiple BoMs for Same FG and Subcontracting Vendor

    Hello Gurus, I have a situation where client get job-work done for a finished good with multiple BoMs .... It is only decided at the time of creating PO when they decide which components/ child items to be used (Product Version). Even if the check for update info record is unchecked, the system don't ask for the choice 2nd time the subcontracting PO is drafted. Please guide what can be done under such circumstances.

    Hi,
    Please check how the alternative BOM can be determined (automatically):
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/b2/fa1ed4d51d11d1a69e0000e83235d4/frameset.htm
    (assign the BOM to production version (C223) >> assign the production version to info record (ME12))
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d2aea44af11d182b40000e829fbfe/frameset.htm
    (lot size; selection date; production version)
    Please check OSS note 458606:
    1. Question
    You work with production versions for selecting bill of material alternatives. How are they determined for SC purchase requisitions or SC purchase orders?
    Answer:
    Purchase Orders:
    In purchasing, the production versions are assigned in the subcontracting purchasing info record. When you create an SC purchase order, the system determines the SC purchasing info record from the combination of vendor and material, and reads the production version. This is then included in the document. It is not possible to manually change the production version in the SC purchase order.
    If you create the SC purchase order with reference to an SC purchase requisition, the system checks whether the production version from the SC purchase requisition matches the version determined from the SC purchase order.
    If the production verions differ, the system displays a dialog box and the user can decide whether the production version from the SC purchase requisition is to be transferred or whether the BOM is exploded using the newly determined production version from the SC purchasing info record.
    A selection of the production versions by date or similar is not available in purchasing.
    Regards,
    Csaba

  • Display specific row to display multiple time in jsf table 11.1.1.2.0 with

    HI ALL,
    I'm using jdeveloper 11.1.1.2.0 with ADF 11g.
    I have to display the values in jsf frm table where i'm using DislayCertDetailVO . In dis VO i'm having a column no.of certificaties .taking dis column value when i navigate to other page jsf by selecting a specific row. here i have to display the selected row in multiple times based on the no.of.certificates column value.
    I want to display specific row to display multiple time to repeat same row in a table in jsf based on the value from bean or table in database.
    Edited by: user9010551 on Apr 28, 2010 6:14 AM
    Edited by: user9010551 on Apr 28, 2010 10:33 PM

    Hi, Trying it once more to give more clarity of my scenario.
    I have to navigate from 1 screen to the other by picking a given table record/row from the 1st screen. While displaying the record on the 2nd screen the catch is that, I have to display it as many times as the value in a cell of the selected record.
    eg.
    screen 1
    col1   col2     col3
    2 order1 item1
    [next]
    On clicking next it should look like
    screen2
    col1           col2            col3           col4
    order1 item1
    order1 item1
    where col3 and col4 will be editable by the user and col1 is the value depends how many times i have repeat the row/record
    Hope this give more clarity.

  • How to display multiple lines in a text box defined in  steploop.

    Hi,
    I have a requirement to display data ( which is dynamic in nature. I determine data type,length etc dynamically) in a table format. I am using step loop for the same. I am facing a problem. Some field can be as long as 256 char long. Is there  any way to display multiple lines in text box defined in a step loop so that I can display the complete string as one entity.
    I can't use custom control as custom control can't be defined in a step loop or table controlI would really appreciate your help on this.
    Regards,
    Sanjeev

    Hello Sanjeev
    Perhaps it is possible to use a <b>mixed strategy</b> consisting of a classical table control (or, even better, an ALV grid list) where you display the first 250 character of the data and next to the table control you place a simple textedit control. When the user selects one of the text fragments in the table control the entire text will be displayed in the textedit control.
    Regards
      Uwe

  • How to accept multiple attachments on selection screen?

    Hi All,
    I need to know how to accept multiple attachments on selection screen and send them as email to external system (outlook).
    Basically, my req is to send a common email with attachments to certain users. These users are displayed in ALV. User will select ALL or specific user from ALV and send an email with message entered on selection screen.
    I used text editor control to input message body. I need to know how to accept attachments and send them.
    Appreciate any inputs.
    Thanks,
    SKJ

    SAP uses a nifty little button called 'Object Services' on ME23N (top left) which you can use to attach documents to business objects.
    http://help.sap.com/saphelp_nw70/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm
    It's a complicated way of doing it but might give you extra functionality in the long run.

  • Clearing the displayed value for a SELECT-OPTION

    How do I clear the displayed value of a SELECT-OPTION? 
    I have 2 SELECT-OPTIONs on my screen (standard basic report program screen).  I use code like this to populate the drop-down boxes for each one. 
    =====
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
      PERFORM fill_prgrp_values.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
      PERFORM fill_prctr_values.
    =====
    The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION. 
    If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
    1.  Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
    2.  Clear the displayed value from the second SELECT-OPTION that the user entered previously.  That value became invalid when the user picked a new value for the first SELECT-OPTION. 
    How do I clear that second displayed value? 
    I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low.  They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen. 
    I need to clear out the displayed value so the user will either leave it blank or enter or select a new value. 
    I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen. 
    Thanks for your help.

    Sorry, but calling DYNP_VALUES_UPDATE did not work.  This is how I coded it. 
    fld_reset_rcd-fieldname  = 'S_PRCTR'.
      fld_reset_rcd-stepl      = sy-stepl.
      CLEAR fld_reset_rcd-fieldvalue.      "  re-initialize s_prctr
      CLEAR fld_reset_rcd-fieldinp.        "  what goes in here?
      APPEND fld_reset_rcd TO fld_reset_tbl.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname = 'ZFI_GL_BALANCE_NGL'
          dynumb = '1000'
        TABLES
          dynpfields = fld_reset_tbl
    <Added code tags>
    I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat.  If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen.  It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc. 
    To devrath.sampat  --  Thanks for your example for building the drop-down list, but that is not the problem I am having.  I am already able to build it just fine. 
    To repeat my problem, if I: 
    1.  first enter / select a value for the first SELECT-OPTION s_prgrp
    2.  then enter / select a value for the second SELECT-OPTION s_prctr
    3.  And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
         when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
    Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
    Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

  • LTP in MULTIPLE BOM  scenario

    Hi friends,
    Please suggest for this following issue which is urgent one
    Client Have 2 plants:  2010-PRODUCTIONM PLANT ( MONTHLYROLLING PLAN)
                                        2020- WAREHOUSE PLANT (ANNUAL SALES PLANNING )
    Have 2  type of planning.
    1. Annual Sales planning      Infor structure S501 and Planning type Z501 are used.
    2. Monthly rolling planning.     Infor structure S502 and Planning type Z502 are used
    PROBLEM IN
    Annual sale planning- PLANT 2020
    Using T code MC94 and planning type Z502, the final sales plan is recorded for all material in the plant 2020 for the active version A00.
    After the data is saved it is transferred to the Demand management using PIR_SP_FM schedule batch job using the T codes MC8E for selection and MC8G for execution
    Once the data is transferred to demand management long term planning run is executed using MS01 T code for the planning scenario 001
    The problem we have is in this ‘001’ planning scenario. What we have setup at present is to select the existing BOM which is used in the normal MRP run. But the FMCG sector requires to different BOMs and different recipes.
    NB: client needs to run long term planning run for plant2020 with planning scenario  001 .
    while creating the PIRS  they want to go for alternative BOM and RECIPES(ROUTING ) so that they can plan according to the change in requirement.In current scenario they use single BOM and single recipe.
        Problem lies as 2020 plant is only warehouse plant . It does not have any BOM and Recipe in it. so how  planning run will be executed for annual sales plan with the explosion of BOM in this plant and the alternatives will be chosen In A multiple BOM and Recipe scenario WHICH NOW CLIENT WANTS TO SWITCH OVER.Client uses MS04 TCODE for the over view of stock in LTP where the change should reflect …
    THANKS AND REGARDS,
    omkar

    hi,
    Bom selection process in LTP works similar to operational planning, i.e it is based on lot size and date.
    Reward if useful.
    Amit

  • Displaying Multiple Values on GUI components - best way to implement

    Hi,
    my program needs to implement a basic function that most commercial programs use very widely: If the program requires that a GUI component (say a JTextField) needs to display multiple values it either goes <blank> or say something more meaningfull like "multiple values". What is the best way of implementing it?
    In particular:
    My data is a class called "Student" that among other things has a field for the student name, like: protected String name; and the usual accessor methods (getName, setName) for it.
    Assuming that the above data (i.e. Student objects) is stored in a ListModel and the user can select multiple "Students", if a JTextField is required to display the user selection (blank for multiple selections, or the student "name" for a single selection), what is the best (OO) way of implementing it? Is there any design pattern (best practice) for this basic piece of functionality? A crude way is to have the JTextField check and compare all the time the user selections one by one, but I'm sure there must be a more OO/better approach.
    Any ideas much appreciated.
    Kyri.

    Ok, I will focus on building a solution on 12c.
    right now I have used a USER_DATASTORE with a procedure to glue all the field together in one document.
    This works fine for the search.
    I have created a dummy table on which the index is created and also has an extra field which contains the key related to all the tables.
    So, I have the following tables:
    dummy_search
    contracts
    contract_ref
    person_data
    nac_data
    and some other tables...
    the current design is:
    the index is on dummy_search.
    When we update contracts table a trigger will update dummy_search.
    same configuration for the other tables.
    Now we see locking issues when having a lot of updates on these tables as the same time.
    What is you advice for this situation?
    Thanks,
    Edward

  • Date range to be displayed  & Displaying multiple values on the report

    Hi,
    I have date range parameters, but I also need it to be displayed it on the report. Is there any way I can display it. E.G If a parameter is created one can drag and drop it on the report if it needs to be displayed on the report, I tried to do the same for the date range parameter but it does not work.
    Also If a parameter is created by selecting the option 'Allow Multiple Values', and if you drag and drop it on the report only the first value is displayed and the rest does not show. Has anyone tried this before and been successful in displaying multiple values in the report.
    Thanks in advance.

    Hi,
    A multi-value parameter is actually treated as an array in Crystal Reports.
    To display the values selected in the parameter, create a formula from the Field Explorer and type this code:
    Join({?ParameterName},",");
    Place this formula on the header or the footer sections of the report.
    Regarding the date range issue, please follow Sastry's advice and it should work fine.
    Make sure you're using the parameter in the Minimum and Maximum functions. For eg: If I was to create a date range parameter called OrderDate, my formula to show the start date would look like this:
    Minimum({?OrderDate})
    -Abhilash

  • When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground?

    When displaying multiple curves on one 2d graph in reports how do I force one curve to be in the foreground? I have two signals and I want to show one overlayed on top of the other. Right now Diadem will only graph it the other way around. I have tried deleting the curves and re-adding them in differnt orders, changin the order they are in the curve list, changing their order inthe data portal, right clicking on the curve and selecting "move to forground" (this only moves the entire 2-d graph object to the foreground). Im using Diadem 12.0 Basic.
    Solved!
    Go to Solution.

    Hello Joe,
    I figured out what causes your curves to draw in the wrong "order".
    You are using two Y-axes, and DIAdem always draws the data for Y1 before Y2, no matter what the order of the curves is in the "Curve and Axis Definition" dialog.
    I am attaching your layout with a small modification, I changed the Y1 and Y2 axis order (I swapped which Y-axis the data is displayed on), and I get the following result:
    Once I looked at your layout it became clear why the order of the curves didn't reflect the order in which the curves were drawn. I didn't know this - so I just learned something new here as well.
    I hope this answers your question, feel free to ask if there is anything else I can help you with.
          Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Modified Report Layout.TDR ‏146 KB

  • Simple Event being Displayed Multiple Times

    I have a simple event from the past that is being displayed multiple times. There are no other UIDs that are the same in iCal and no other event has the same SUMMARY name.
    This particular event shows up 9 times. I can also reproduce the result from Automator by searching the specific calendar and looking for events in the date range.
    The event is as follows:
    BEGIN:VCALENDAR
    VERSION:2.0
    PRODID:-//Apple Inc.//iCal 3.0//EN
    CALSCALE:GREGORIAN
    BEGIN:VEVENT
    SEQUENCE:5
    TRANSP:OPAQUE
    UID:EC6F5DBC-9BCC-4007-87F2-4A9C796C8551
    DTSTART:20070330T000000
    DTSTAMP:20071206T205550Z
    SUMMARY:Babysit Paul
    CREATED:20080919T173959Z
    DTEND:20070401T120000
    END:VEVENT
    END:VCALENDAR
    I am not very familiar with the format but it looks pretty straight forward.
    The calendar is being synched via Mobile Me and is shared by another two computers. Not sure why this should be relevant since the entry on the computer and on Mobile Me both show this duplication of the event.
    The reason I was looking at all was because of the hangs in iCal since I set the sync to automatic.
    Any ideas welcome,
    Richard

    Post Author: foghat
    CA Forum: Data Connectivity and SQL
    If all the records you are displaying in your report
    truly are duplicated, you could try check off 'select distinct records'
    from the File --> Report Options menu.  While this may solve the problem for you, it would be worthwhile to determine if you are actually joining your tables correctly.
    likely the records aren't an exact duplicate and the problem is with your join criteria.  To verify this you can:  start by removing table b from the database expert altogether.  does
    that solve your problem of multiple rows?  If it does, you are not joining to table b correctlyIf you still have
    multiple rows, loan_id on its own must not make a record unique.  Is
    loan_id duplicated in either of your tables?  Just because loan_id is a
    primary key does not necessarily mean it is unique - often a record
    will have 2 or more primary keys and only when all primary keys are
    used is the record unique.   If you display all of the columns
    from both tables, you will hopefully see some (maybe just one) columns
    where the value is different between your seemingly duplicate data.
    You may need to join on this value as well.as for the type of join you are using (inner, not enforced) you should be fine. Good luck

Maybe you are looking for