To find out files to be recompiled

Hi All,
Suppose I have hundreds of source files in a number of packages. Suppose some file in a package has changed. How do I find out which of the classes in the whole project have to be recompiled ?
I do not want to do an entire rebuild.
* Is there any tool which does this ?. I found that ANT tool will NOT do this, because it looks only at the timestamp and will not go inside code and look for dependency information.
Thanks
Ratheesh

I'm not an Ant expert, but I'm pretty sure that you have to describe the dependencies yourself. Just like Make, which is another option. There are a lot of build tools in this world. I've yet to hear of one which doesn't require you to specify the dependencies, but maybe I'm just living in a fog.

Similar Messages

How do I find out a file's particular size?

Good Evening,
I am looking for assistance with figuring out a file's particular size within a group of files.
If I have one large directory and I am looking to find out what the smallest file in that directory is, how would I go about doing it?
Also, how would I figure out when the file was created on the system or particular hard drive such as a network attached storage device?
Thank you!

While command + i (or the Finder Information icon) would give you the file size, that would require a one-by-one approach. Perhaps quicker would be using a utility like "What Size" that will list Folders/files and give the size of each.

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen. Can you please help me.

How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
Can anyone please help me with this so I know how many music files or video files I have in my collection.

Have a look here...
http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were

I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were created in and get them to be useable in InDesign 6, but I'd need an email address that was registered to our software to give the help desk person. After finding the correct email address, different adobe help number people told me to come here to ask as there is no phone support. Can anyone get me to an adobe technician that can provide a price quote for finding out what created these files and for getting them converted? Thanks.

Sorry, I understood you to say you had the whole CS6 suite, which includes Illustrator.
As far as finding out what the files are, sometimes you can look at them in a text editor to figure this out. See below; the, Creator Tool line. Not every software package makes it this easy, though.

How to find out duplicate record contained in a flat file

Hi Experts,
For my project I have written a program for flat file upload.
Requirement 1
In the flat file there may be some duplicate record like:
Field1   Field2
11        test1
11        test2
12        test3
13        test4
Field1 is primary key.
Can you please let me know how I can find out the duplicate record.
Requirement 2
The flat file contains the header row as shown above
Field1   Field2
How our program can skip this record and start reading / inserting records from row no 2 ie
11        test1
onwards.
Thanks
S
FORM upload1.
DATA : wf_title TYPE string,
lt_filetab TYPE filetable,
l_separator TYPE char01,
l_action TYPE i,
l_count TYPE i,
ls_filetab TYPE file_table,
wf_delemt TYPE rollname,
wa_fieldcat TYPE lvc_s_fcat,
tb_fieldcat TYPE lvc_t_fcat,
rows_read TYPE i,
p_error TYPE char01,
l_file TYPE string.
DATA: wf_object(30) TYPE c,
wf_tablnm TYPE rsdchkview.
wf_object = 'myprogram'.
DATA i TYPE i.
DATA:
lr_mdmt TYPE REF TO cl_rsdmd_mdmt,
lr_mdmtr TYPE REF TO cl_rsdmd_mdmtr,
lt_idocstate TYPE rsarr_t_idocstate,
lv_subrc TYPE sysubrc.
TYPES : BEGIN OF test_struc,
/bic/myprogram TYPE /bic/oimyprogram,
txtmd TYPE rstxtmd,
END OF test_struc.
DATA : tb_assum TYPE TABLE OF /bic/pmyprogram.
DATA: wa_ztext TYPE /bic/tmyprogram,
myprogram_temp TYPE ziott_assum,
wa_myprogram TYPE /bic/pmyprogram.
DATA : test_upload TYPE STANDARD TABLE OF test_struc,
wa2 TYPE test_struc.
DATA : wa_test_upload TYPE test_struc,
ztable_data TYPE TABLE OF /bic/pmyprogram,
ztable_text TYPE TABLE OF /bic/tmyprogram,
wa_upld_text TYPE /bic/tmyprogram,
wa_upld_data TYPE /bic/pmyprogram,
t_assum TYPE ziott_assum.
DATA : wa1 LIKE test_upload.
wf_title = text-026.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = wf_title
default_extension = 'txt'
file_filter = 'Tab delimited Text Files (*.txt)'
CHANGING
file_table = lt_filetab
rc = l_count
user_action = l_action
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
OTHERS = 3. "#EC NOTEXT
IF sy-subrc 0.
EXIT.
ENDIF.
LOOP AT lt_filetab INTO ls_filetab.
l_file = ls_filetab.
ENDLOOP.
CHECK l_action = 0.
IF l_file IS INITIAL.
EXIT.
ENDIF.
l_separator = 'X'.
wa_fieldcat-fieldname = 'test'.
wa_fieldcat-dd_roll = wf_delemt.
APPEND wa_fieldcat TO tb_fieldcat.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
CLEAR wa_test_upload.
Upload file from front-end (PC)
File format is tab-delimited ASCII
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_file
has_field_separator = l_separator
TABLES
data_tab = i_mara
data_tab = test_upload
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
EXIT.
ELSE.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
IF test_upload IS NOT INITIAL.
DESCRIBE TABLE test_upload LINES rows_read.
CLEAR : wa_test_upload,wa_upld_data.
LOOP AT test_upload INTO wa_test_upload.
CLEAR : p_error.
rows_read = sy-tabix.
IF wa_test_upload-/bic/myprogram IS INITIAL.
p_error = 'X'.
MESSAGE s153 WITH wa_test_upload-/bic/myprogram sy-tabix.
CONTINUE.
ELSE.
TRANSLATE wa_test_upload-/bic/myprogram TO UPPER CASE.
wa_upld_text-txtmd = wa_test_upload-txtmd.
wa_upld_text-txtsh = wa_test_upload-txtmd.
wa_upld_text-langu = sy-langu.
wa_upld_data-chrt_accts = 'xyz1'.
wa_upld_data-co_area = '12'.
wa_upld_data-/bic/zxyzbcsg = 'Iy'.
wa_upld_data-objvers = 'A'.
wa_upld_data-changed = 'I'.
wa_upld_data-/bic/zass_mdl = 'rrr'.
wa_upld_data-/bic/zass_typ = 'I'.
wa_upld_data-/bic/zdriver = 'yyy'.
wa_upld_text-langu = sy-langu.
MOVE-CORRESPONDING wa_test_upload TO wa_upld_data.
MOVE-CORRESPONDING wa_test_upload TO wa_upld_text.
APPEND wa_upld_data TO ztable_data.
APPEND wa_upld_text TO ztable_text.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ztable_data.
DELETE ADJACENT DUPLICATES FROM ztable_text.
IF ztable_data IS NOT INITIAL.
CALL METHOD cl_rsdmd_mdmt=>factory
EXPORTING
i_chabasnm = 'myprogram'
IMPORTING
e_r_mdmt = lr_mdmt
EXCEPTIONS
invalid_iobjnm = 1
OTHERS = 2.
CALL FUNCTION 'MESSAGES_INITIALIZE'.
**Lock the Infoobject to update
CALL FUNCTION 'RSDG_IOBJ_ENQUEUE'
EXPORTING
i_objnm = wf_object
i_scope = '1'
i_msgty = rs_c_error
EXCEPTIONS
foreign_lock = 1
sys_failure = 2.
IF sy-subrc = 1.
MESSAGE i107(zddd_rr) WITH wf_object sy-msgv2.
EXIT.
ELSEIF sy-subrc = 2.
MESSAGE i108(zddd_rr) WITH wf_object.
EXIT.
ENDIF.
*****Update Master Table
IF ztable_data IS NOT INITIAL.
CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
EXPORTING
i_iobjnm = 'myprogram'
i_tabclass = 'M'
I_T_ATTR = lt_attr
TABLES
i_t_table = ztable_data
EXCEPTIONS
attribute_name_error = 1
iobj_not_found = 2
generate_program_error = 3
OTHERS = 4.
IF sy-subrc 0.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = 'zddd_rr'
msgty = 'E'
txtnr = '054'
msgv1 = text-033
EXCEPTIONS
OTHERS = 3.
MESSAGE e054(zddd_rr) WITH 'myprogram'.
ELSE.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = 'zddd_rr'
msgty = 'S'
txtnr = '053'
msgv1 = text-033
EXCEPTIONS
OTHERS = 3.
ENDIF.
*endif.
*****update Text Table
IF ztable_text IS NOT INITIAL.
CALL FUNCTION 'RSDMD_WRITE_ATTRIBUTES_TEXTS'
EXPORTING
i_iobjnm = 'myprogram'
i_tabclass = 'T'
TABLES
i_t_table = ztable_text
EXCEPTIONS
attribute_name_error = 1
iobj_not_found = 2
generate_program_error = 3
OTHERS = 4.
IF sy-subrc 0.
CALL FUNCTION 'MESSAGE_STORE'
EXPORTING
arbgb = 'zddd_rr'
msgty = 'E'
txtnr = '055'
msgv1 = text-033
EXCEPTIONS
OTHERS = 3.
ENDIF.
ENDIF.
ELSE.
MESSAGE s178(zddd_rr).
ENDIF.
ENDIF.
COMMIT WORK.
CALL FUNCTION 'RSD_CHKTAB_GET_FOR_CHA_BAS'
EXPORTING
i_chabasnm = 'myprogram'
IMPORTING
e_chktab = wf_tablnm
EXCEPTIONS
name_error = 1.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
****Release locks on Infoobject
CALL FUNCTION 'RSDG_IOBJ_DEQUEUE'
EXPORTING
i_objnm = 'myprogram'
i_scope = '1'.
ENDIF.
ENDIF.
PERFORM data_selection .
PERFORM update_alv_grid_display.
CALL FUNCTION 'MESSAGES_SHOW'.
ENDFORM.

Can you please let me know how I can find out the duplicate record.
you need to split the records from flat file structure into your internal table ans use a delete ADJACENT duplicates comparing fields
split flat_str into wa_f1 wa_f2 wa_f2 at tab_space.

How to find out what was imported from a dump file

Hi.
I got the dump file from a group and they told me to import it. Import job went successfully without errors as following:
Import: Release 9.2.0.6.0 - Production on Mon Oct 16 20:53:12 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by OPS$ORACLETS, not by you
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing OPS$ORACLETS's objects into SYS
. importing BDS_APP's objects into BDS_APP
Import terminated successfully without warnings.
How do i find out what was imported from a dump file?

another way would be to just list the contents of the dump file
imp user/pass file=dumpfile show=Y

How can I find out which .pst or .ost file itunes referres to when synchronising with outlook

I´ve switched to iphone 4S from my 3Gs and would like to "clean" my itunes Sync before I use the new phone. Problem is, that the synchronisation with Outlook 2003 doesn´t work anymore. I guess the reason is that itunes refers to an old .ost or .pst file on my computer. I ve got several outlook profiles and changed from exchange to pop3. My question: How can I find out which .pst or .ost file itunes referres to?
Thanks a lot in advance :-)

Select the tune and then - Get Info - in the dialog box is a note of the Apple ID used to purchase.
MJ

I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete

Is there a way to find out ALL the files an FCP project uses?

Okay. Firstly, I'm an idiot. I don't know why, but at the START of the project, I didn't think I'd end up with so many little tiny bits and pieces... so I didn't really plan the organization of this thing. (My next project will be meticulously organized, I can assure you.)
But, here I am, and here's my problem.
I've got a pretty big project I've been working on for six months that's probably taking up 250 GB of space on my computer (spread over two 350 GB hard drives). It includes 125 GB of source footage, hundreds of little Motion projects (including various "drafts" of each one), PSD images, LiveType files, an assortment of Soundtrack Pro files, AIFFs, exported clips from all the various cuts of the project, etc etc etc. Stupidly, I always saved things in different folders, using a system and thought process that "seemed like a good idea at the time".
Problem is, now that I'm (nearly) finished with the thing, I need to archive the "final cut", and all it's many source files (such as Motion projects, which may need to be edited later if this project gets sold into foreign markets, etc).
Suddenly, I realize how important Organizational Skills really are.
But is there a way (simple or not-so-simple) to find out EVERY SINGLE FILE that's referenced on a timeline? (I have lots of stuff imported into the project that I know isn't used on any timeline, but I'm afraid of moving or deleting things for fear of never finding it again.)
I'd love to get some sort of "printout" (a list or something) of every single file.
The idea is, I would then move ONLY those files to a newly-organized filing system, which could be easily archived/backed-up. It would also be great to keep the RENDER files, too, so that I won't have to re-render everything when I pull it out of cold storage.
Am I dreaming an impossible dream?
Any ideas?
Thanks!
OZ

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

How can I find out the number of lines in a text file?

How can I find out the number of lines in a text file?

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

How can i find out the Location of fmx file in the forms

Hi,
I want to find out the drive name,WHich Contains Fmx file. How can i find it out(at run time) .
It should be found inside the form.So that i can pass it as a parameter to a Procedure.
Thanlks in advance.
regards,
Alok Dubey

hi,
if you are using Client/Server forms with d2kwutil then this should return form full name :
win_api_environment.get_working_directory() || get_form_property(:System.Current_Form,FILE_NAME)
engin.

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How do I find out the file size of my photos, and change them to the size

This will sound inane, but I cannot figure out where to find the file size of my photos in iPhoto. I need a jpeg of a certain file size and image size for my blog background, but can't figure out how to even start.

If the limited quality options do not get you the file size you need export the full size image files to a folder on your Desktop and use Resize! to batch resize the image dimensions and file size (jpeg compression level) to what you need.
Click to view full size
With Resize! you can fine tune the pixel dimensions and file size.
OT

How do I find out app file size

I only have 1.7gb left on my 8gb phone and notice that an app I am considering is 1.3 gb. How do I find the file size of apps before I buy them so I don't pay for something and then find out that I don't have enough space?
Thanks!

I mean if I download this file and am left with only 0.4gb and want to download more apps in the future. Or if I HAD only 0.4gb left and needed to remove apps to make room, how do I know how large the are?
Thanks!

How do I find out a file in a disk?

can anyone tell me
how to I find out a file in a disk?
Thanks in advance.

That's almost a haiku you wrote there, isn't it?
There's no standard API class/method to do that so you need to write your own: you'll have to pass through directories recursively. The File.list method will help you get file listings from a directory.

To find out files to be recompiled

Similar Messages

Maybe you are looking for