To find out structure at component level......

Hi,
I want to know the structure where the material is stored at component level of subcontracting PO. I know that the material at item level will be stored in i_ekpo. If the item category is L we can find the component Icon. There i want to know the structure of material where it is stored. Please give solution urgently. It will be very much helpful.

Similar Messages

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to find out SAP J2EE Patch Level for 04s

Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
Asif

Thanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif

How to find out structure of internal table?

Hi
is there any way how to find out name of structure upon which internal
table was created?
i got internal table passed to function module by any table
type. There can be different types of table passed in. Inside of
module a need to find out the structure of table.
I've found a tricky way how to find this information using following
command 'DESCRIBE FIELD dobj INTO td.', but its probably not a correct
way because using this command is not recommended in application
programs.
Is there any function module, or something i can use for getting this information?
Thanks

Thanks very much
This has solved my problem:
DATA descr_ref TYPE ref to cl_abap_typedescr.
DATA tabname TYPE string.
descr_ref = cl_abap_typedescr=>describe_by_data( itab ).
tabname = descr_ref->absolute_name.

How to find out object / schema / database level replication is active

Hi,
I am an experienced DBA but new to streams and I am asked to support an existing streams configuration between two Oracle 10g databases. I was told it is bi-directional but one database is standby and it never took traffic. My questions are
1. How will I find out whether it is a database or schema level replication? Any queries that I can run to find it out?
2. How do I find out it is bi-directional and it iis current. What queries I can run to confirm?
3. How will I find out the excluded objects? Any queries please...
Thanks for the help
Regards
Rama

http://www.morganslibrary.org/reference/dyn_perf_view.html#dyst
SELECT name FROM dba_dependencies
WHERE referenced_name = 'DBMS_STREAMS_ADM' AND name LIKE 'DBA%'
UNION
SELECT referenced_name FROM dba_dependencies
WHERE name = 'DBMS_STREAMS_ADM' AND referenced_name LIKE 'DBA%';

How to find out Application from Component

Hi Experts,
I have a component called FITV_VT_TRIP_DOCUMENT which is called from two applicatons FITV_POWL_TRIP and another one say ABC.
Now i need to know which application is calling the component.
Is there any Class->Method to find out the application name from component.
Or Is there any method to get the browsers URL from that component.
Thannks,
chandra

Hi,
When you pass the Application name you can get the URL (But this can be mapped to external alias also).
* Generate the url for the component
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = 'ZWDC_SALES_REPORT' "Application name
    IMPORTING
      out_absolute_url = lv_url.    "String
   "This can be an internal alias
Refer these links -
To get Component name from Application -
How to get Component name from Application
Get the Calling WD component name -
The name of calling WebDynpro
Regards,
Lekha.

How to find out the support package level applied in BusinessObjects

Hello experts,
I recently installed SBOP 4.0 BI on mi linux server. Can somebody tell me how to know what is the latest SP (support package or Service package??) installed on my Server.
I know the current SP available is SBOP BI Platform Servers 4.0 SP01 Patch 2, but I don't know whether it is installed or not on my server
thank you for your help
regards

Dear,
I had a double check and you are right at least as far I can see the Software Inventory toll came only with WIN installation while you are running your BO on Linux.
What the Software Inventory Tool does it checks files version.
Now I'm not very smart with Linux but can you check file version in Linux?that could be an option (In WIN i check CMC.DLL)
Hope it is an useful info.
Ciao,
Massimo
Edited by: M. Cappelli on May 23, 2011 11:20 AM

How can i find out field for a particular component type

hi,
how can i find out for particular component name is belongs to this field.....that means REF_DOC_NO componemt is belongs to xblnr field ..../.if we know only component type ...how to find the field...
plz tell me
thanks&regards,
kalyan

keep the cursor on component
press F1
select technical information
you will find the field name and table or structure name
regards
sateesh

Find out the "Action" invoked in component controller

Hi,
Is there a way where i can find out in my component controller(wdPostProcessing) which button was clicked in the View?

I am using EVS. In that when the entered value doesn't match the enumeration values, it gives a error "String "xxx" doesn't match the enumeration". Now i when i click my custom Reset button in my WD application i want that all the values to be cleared (I have a bunch of EVS's ) on the screen. But when i have such error like the above my OnActionReset is not invoked at all until i clear manually all the invalid values in the EVS.
In debug i found that the control directly goes to component controller wdPostProcessing methods even before it invokes the OnActionXXXX events. So, here i want to identify the action generated on the view and do something to handle it.
I also want to give my custom message instead of seeing the standard message "String XXX doesn't match the enumeration".
Message was edited by: Aditya Atluri
Message was edited by: Aditya Atluri

How to find the Web Dnpro component from the Source code ?

Hi Gurus,
Please help me to find out the WD Component Name from the Source Code?
Regards
Anil

Hi Thomos,
When i right clik on the screen i see the following line by line.
-Back
-forward
-save background as
-set as background
-copy background
-set as desktop item
-select all
-Paste
-create shotcut
-add to favorites
-view source
-encoding
-print
-refresh
-export to microsoft excel
-properties
I have mentioned every thing i see when ever i right click on the screen.
--Anil

How to find out SC's under DC's

Hello,
I wanted to know whether there is any easy way to find SC's under DC's. We had to find out under which component does com.sap.security.api.sda exists.
We used SDM and tried each and ever component and finally found out it exists in SAP-JEECOR.
I'm looking for some application or help which tell us that this component has these applications. I know that we can see it in NWDS but unless we upload the component into Track we cannot see them.
Thanks,
Praveen

Hello everybody,
Regular I'm facing the same issue, so these tips come in handy. Tnx!
I have an additional question regarding this issue. How to find out in which DC a specific class is found? For example I'm currently implementing a portal DC and want to use some navigation classes (e.g. INavigationNode) but can not find the DC they are in and thus not the SC.
Does anyone know an easy way to find this out, in general for class X or specific for the navigation classes?
Tnx a lot. Regards,
Christophe

How to find out SR level in SAP system

Hi Guys,
How to find out the SR level of our system in Windows. And can any one tell me, what are the necessary CD's required for ECC 6.0 installation. I can found all the informations but I can't found for specific installation on windows -- mssql .
Thanks
Regards,
Ral

An SR (Service Release) is simply a base release + a certain amount of SPs(Support Packs).
So, the question you really want is what SP level is the system at. If it's an ABAP system, you can find that in the SYSTEM menu-->STATUS. Then click the magnifying glass under the "system data" section to see the individual SPs for the various components.
If it's a Java system, you need to log into the URL for the system information screen. That is:
http://<host>:5xx00
(where xx is the system number)
click "system information" and login with an administrative user. The component listing on that screen will tell you what level your java components are on.
You can download all needed software from
http://service.sap.com/swdc
You will need an OSS account, and proper authorizations given to you by an admin by the customer. Further, you will need your downlaods to be approved via the SolMan Maintenance Optimizer by an admin at the customer.

How to find out the oracle level user(sid) who is updating the table?

Hi everyone,
I am creating a update trigger which is to look for the user (sid) who is updating the rows in this table. Is there any lower level dynamic view or table I can use to find out the user?
Thanks for any help.
Jun

Hi, please repost this question in the Database section under the SQL & PL/SQL discussion forum
PL/SQL
thanks - OTN

How to use ONE query to find out tree structure?

ID------------upperID----------Name------------------------isFolder
1------------ 0---------- Folder
1------------------------------------1
2------------ 1------------ Folder 1- Sub
Folder--------------------1
3------------ 2------------
Folder1-Item1-A--------------------------0
4------------ 1------------ Folder 1- Sub
Item-----------------------0
Hi all, if I have a table like above to demonstrate the
folders and item relationship. This structure allows the user to
create unlimited folders and items.
Now I would like to use one query to find out the tree
structure of this table, how could I do the query.
Any help on this will be highly appreciated!
Thanks,
ez

Also, see this thread:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=1&catid=7&threadid=12 55788&enterthread=y

Table component - how to find out which cell is clicked

Hello!
I have a couple of questions regarding table component
1. Is there any way to find out which table cell is clicked on?
2. And is it possible to paint clicked cell programmatically?
Possible solution might be a Select Boolean Checkbox inside a cell, but anyway, i'd have to determine which cell contains this checkbox (some kind of cell coordinates, etc...)
Thank you

1. Is there any way to find out which table cell is clicked on? It would be easy to suggest the way, if you can share us the requirement
2. And is it possible to paint clicked cell programmatically?You can do it through javascript by setting contentStyle property.
Sample Code:
<af:table ...>
<af:column>
     <af:inputText ...>
              <af:clientListener method="paintCurrentCell" type="click"/>
     </af:inputText>
</af:column>
</af:table>

function paintCurrentCell(event){
    event.getSource().setContentStyle("background-color:red");
}Sireesha
Edited by: Sireesha Pinninti on Nov 10, 2009 7:01 PM

To find out structure at component level......

Similar Messages

Maybe you are looking for