To Get Different Version of program through programatically.

Hi Experts,
My requirement is to find no. of line changes betwwen two version of program.
I did the following steps
i) Got the Transport request number from table e070 for corresponding users.
ii) Got the pgmid object obj_name from table E071.
iii) Got the remaining details from TADIR and trdir table.
And for Each name file from TADIR table,
By using Read Report statement I got the program in Internal table and able to count the no of lines,
But how i can retrieve the different/old version of program.
Your early reply would be highly appreciated.
Thanks
James

Hi Vikranth,
I know VRSD is the table we can get the version number, but for both version the
Program/object number will be the same. So we cannot achive my requirement.
Hi Markus,
I am looking into the compare_versions form, but its clueless for me!,
How it works any idea?
Regards
James

Similar Messages

Getting different versions of apps (CS6 & CC) on 2 computers under 1 acct, despite doing upgrades

I have one CC account, installed on a laptop and a desktop. On the laptop most apps are CC version, on the desktop only PhotoShop is CC, all the rest are CS6. I keep doing upgrades, but there is never the option to upgrade to CC, only CS6. How can I get the applications to be consistent across the two computers? It's a pain when I open a file (that was created on my desktop) on my laptop and resave it, then get the warning about saving to a "legacy format".

This may also help
CC desktop lists applications as "Up to Date" when not installed
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
also
Programs won't display if they will not install on your computer
-http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

How to get old versions of Xcode 4.1

I'm doing some Ruby on Rails tutorials that require nothing higher than XCode 4.1.
How does one get previous version of programs like XCode, which is now at 4.3.2?
Thanks.

https://developer.apple.com/downloads/
...may require logon.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

The current version of Aperture requires 10.7.5 or later.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flashplayer. With the Reader, I was able to find a different install

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XP

Use these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/

How to enable JIT debugging on my Windows 7 (64 bit) computer? I keep getting different Errors popping up on my computer about debugging different programs and that JIT debugging must be enabled!

How do I enable JIT debugging on my Windows 7 (64 bit) computer? I keep getting different Errors popping up on my computer and the latest one says when I attempted to watch a DVD video with VLC media player but this isn't the first error this week saying
that JIT debugging must be enabled and I don't know how to do that : ( "Microsoft Visual C++ Runtime Library" Assertion Failed! Program C:\Program Files (x86) VideoLAN\VLC\vlc.exe File: vm.c
Line: 1765
Expression: pgcit != NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts.
(Press Retry to debug the application- JIT must be enabled)

Hi Rhondavas77,
To enable/disable Just-In-Time debugging
On the Tools menu, click Options.
In the Options dialog box, select the Debugging folder.
In the Debugging folder, select the Just-In-Time page.
In the Enable Just-In-Time debugging of these types of code box, select or clear the relevant program types:
Managed, Native, or Script.
To disable Just-In-Time debugging, once it has been enabled, you must be running with Administrator privileges. Enabling Just-In-Time debugging sets a registry key, and Administrator privileges are required to change that key.
Click OK.
More information is here.
http://msdn.microsoft.com/en-us/library/k8kf6y2a(v=vs.85).aspx
Best Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support

Hi, I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer".

Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me. Many thanks.

Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Different versions of a program, subvies location

Hello everybody,
I have problem when I try to keep two different versions of a proyect in my PC. I have developped a project with one main VI and severals subVIs. This project is working properly but now I want to make some modifications. Then I have created another folder with a copy of this program (kind of security copy). However, when I open the new version, there are conflicts with the subvis of both versions(the old one and the new one). And I wouldn't like to make some changes and to modify the security version and every time I open one version have to be resolving all the conflicts either.
Do you know any way to avoid this problem?
Thank you!!
Solved!
Go to Solution.

If you are not using revision control software, a simple trick to store a "backup" copy is to zip the entire folder that contains your project. Especially if all your files reside within the folder.
R

How to get the version changes programatically in ItemCheckedin event

Hi,
I am creating a custom version history page.
I have a requirement were I have to capture the changes after file check-in and display it in the custom page.
Is there anyway to get the version changes programatically after the file has been checked-in?
Is is possible to get the current version and previous version in ItemCheckedin event
and get the version changes?
Thanks in advance,
dhijit

Hi,
As Dimitri said, we can use ItemCheckingIn event to achieve it.
The following code snippet for your reference:
public override void ItemCheckingIn(SPItemEventProperties properties)
base.ItemCheckingIn(properties);
int beforeLevel = (int)properties.BeforeProperties["vti_level"];
int afterLevel= (int)properties.AfterProperties ["vti_level"];
if((beforeLevel==255) && (afterLevel==1))
// This is a major version that is being checked in . . .
int majorVer= properties.ListItem.File.MajorVersion+1;
Best Regards
Dennis Guo
TechNet Community Support

I've downloaded Adobe acrobat standard Dc only to find out it's not compatible w/windows XP. How do I get a different version?

I've downloaded Adobe acrobat standard Dc only to find out it's not compatible w/windows XP. How do I get a different version?

Hi vincelucy,
If you've purchased a previous version, you can download older installers from this page: Download Acrobat products | Standard, Pro | DC, XI, X (you'll need your serial number to complete the installation).
Best,
Sara

Labview program to get the version of the devicnet devices

The devicenet configurator gets the device name, version, etc.
in labview i wanted to do it program to get the version of the devicnet devices,
so please tell me if anyone know how to do it
[email protected]

Hello.
Thank you for posting to the NI Discussion Forums.
The functionality that you desire should be accomplished by the "GetDeviceNet Attribute.vi". This VI "Get(s) an attribute value from a DeviceNet device using an Explicit Messaging Object." Utilizing the context help in LabVIEW, you will see that the ClassId, InstanceId, and AttributeId controls which attribute you will return the value of. The description of the AttributeId states that it "Identifies the attribute to get. Attribute IDs are listed in the class and instance descriptions in the DeviceNet Specification. The attribute's description also lists the DeviceNet data type for the attribute's value." So, this should allow you to proceed to get the information that you desire. At the bottom of the context help, there is a great example about retrieving the serial number attribute.
Let me know if you have any further questions!
Brian F
Applications Engineer
National Instruments

Good afternoon! We purchased the product Adobe master collection 5.5 AOO Litsense RU. Distribyutiv program has been lost, and now we can not find it on the site. There we find different versions of the program other than Russian. Please tell me where to d

Good afternoon! We purchased the product Adobe master collection 5.5 AOO Litsense RU. Distribyutiv program has been lost, and now we can not find it on the site. There we find different versions of the program other than Russian. Please tell me where to download it?

Voronello volume license installation files are available under the end user or deploy to account at https://licensing.adobe.com/.

I am getting two different versions of the App Store in iOS 6.

I am getting two different versions of the App Store in iOS 6. One is the new one and sometimes when I open it it goes to the old one and says cannot connect to the App Store.

I am having the same problem, but I think I might know what's causing it. I just updated my girlfriend's iPhone 4S (same phone as mine) to iOS 6 and was surprised to find that her app store is working just fine. When I opened hers, however, I did notice that the "Categories" and "Top 25" buttons are totally different; and those happen to be the two buttons that are not working for me. Mine shows the same that yours does, while hers has the "Genius" and "Charts" buttons in the place of the two that are not functioning for me. I believe these old buttons are no longer active and therefor are bombing out when attempting to access them.
Now I said I think I may understand the problem, but unfortunately I have no idea what the solution may be. Hopefully this tread doesn't fade away and our problem gets addressed.

To get JRE or JDK version in Programs

How do get JRE or JDK version in Application Programming?. Kindly Reply...
By
Mani

Hi Manivel.
The System class has methods such as getProperties() and getProperty() that can be used to get almost any system info. To get the version of JRE, for example, you could use something like this:
System.getProperty("java.version");
Check the J2SE 1.5 API reference for more info. Use this URL to go directly to the API reference for the java.lang.System class:
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/System.html
Hope this answers your question.
By the way, this is the JDBC forum. In the future, please post such questions in the Java Essentials forum (http://forum.java.sun.com/category.jspa?categoryID=5) or the Core APIs forum (http://forum.java.sun.com/category.jspa?categoryID=32).
Shakeel.
:)

To Get Different Version of program through programatically.

Similar Messages

Maybe you are looking for