To get the output in the chart for a single selection

Hi all,
I used a query to get the output of the table, and for the same query i have created a view to get the result in the chart.
to get the output of the table for a particular region i have created an input field and added value help to it. When i selected one particular region, i will be getting the data, in the table. But when i select a particular row in the table i need to get the data of that particular row only in the chart. (which i am getting)
But when i select multiple regions at a time, then i am facing the issue. I get result of multiple regions data(at a time two rows are displayed in the chart) in the chart. where in i want to get data only for one region (only one row needs to get selected at a time) to get the result.
Can any one throw a light of what needs to be done here.
Thanks,
Rani

Hi Rani,
I am not sure if I understand your question exactly, but it sounds like you need to set the selection mode for your table to "Single". If you do that the user will only have the possibility of selecting one row at a time in the table; they will not be able to select multiple rows.
You make that setting in the Configure Element panel for the table.
I hope this suggestions helps.
Margaret

Similar Messages

Can we get a output in different languages for the same configuration

Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
Rajesh

A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

EXIT/BADI for enhancing the output of the transaction S_ALR_87013532

Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !

Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM

How to get the output of the report in pdf format

how to get the output of the report in pdf format?
Thanks in advance,
madan.

Refer these links
http://www.sap-img.com/bc037.htm
http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
CONVERT_ABAPSPOOLJOB_2_PDF FM convert abap spool output to PDF

LabVIEW 6.1 If For Loop count terminal is zero then value going through the loop is not passed on to the output of the loop

Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
Gabsi

Hi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

How to get the output of the Send Separate Remittance Advices in XML in R12

Hi All,
I have a requirement where we want the output of the standard report 'Send Separate Remittance Advices' to come in XML, currently its coming in PDF format.
Can you please help?
Thanks,
Dilip
Edited by: 990784 on Mar 12, 2013 2:57 PM

Refer these links
http://www.sap-img.com/bc037.htm
http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
CONVERT_ABAPSPOOLJOB_2_PDF FM convert abap spool output to PDF

Selection-screen in the output of the program

Hi,
I want to print the selection criteria ( or Values ) in the output of the program on the RIGHT HAND SIDE OF THE HEADER. I am doing code through ALV and I want to include the respective code in 'TOP_OF_PAGE'
If there are no values in the selection screen fields, then I DO NOT Print them. Start the values with the texts, such as 'Material', 'Plant', 'MRP Controller' etc. For single values, print the values separated by commas, For a range of values, print the values separated by '-', For the exclusion of single values, print 'EX' before the values.
Thanks in Advance.

To get the parameter list, use [RS_REFRESH_FROM_SELECTOPTIONS|https://forums.sdn.sap.com/search.jspa?objID=c42&q=RS_REFRESH_FROM_SELECTOPTIONS], the rest is basic Abap.
Regards,
Raymond

Problem displaying the output in the same view

hi Gurus,
I have developed an web dynrpo application and have three views, in the first view I am having an input field from which I am calling a BAPI by giving that input field value as input to the BAPI.
Now is it possible to display the output also retrived from the BAPI on the same view.
Thanks and regards
kris

hi LM,
Thanks for your fast response.
I think I was not clear in explaining my problem.
I have a view in which I have an input field which is the input to the BAPI, now on entering the value in the input field I have a submit button, on clicking the BAPI should be executed and also the the output should be displayed on the same view.
Now regarding the mapping both the input and output are in the same context, would that a problem.
And also after getting the output from the BAPI I have to do some validations based on the output from the BAPI and get some message printed on the view.
Please help me in this issue.
Thanks and regards
kris

To store the output of the OutputStream in the String

I can get the output of the transformer.transform("","") to be printed on the screen, but the aim is to store the output in the String.
I checked out the API, one way to get the data would be to store the output in the file using.....
new StreamResult(new File("x.html")) and then get the data. But I am not suppose to use a temporary storage in the form of a file. Is there any other way I can get the data in the form of a String.
The code is :
File file = new File("table.xsl");
StreamSource xslSource = new StreamSource(file);
File file1 = new File("test.xml");
StreamSource xmlSource = new StreamSource(file1);
TransformerFactory tFactory = TransformerFactory.newInstance();
Transformer transformer = tFactory.newTransformer(xslSource);
target = new StreamResult(System.out);
transformer.transform(xmlSource,target);
Thanks in advance.
manibhat

Hi ecbouma,
Thanks for the solution.
I came across another approach..
StringWriter sw = new StringWriter();
PrintStream ps = new PrintStream(sw);
sw.toString();
It works fine...
I have a question over here...
PrintStream takes an argument that extends OutputStream, but looks like StringWriter does not extend OutputStream...
I am not sure why does the above code works.
manibhat

Can't understand the output of the exercise

here is the problem:-
An audio signal is sometimes stored as a list of int values. The values represent the intensity of the signal at successive time intervals. Of course, in a program the signal is represented with an array.
Often a small amount of noise is included in the signal. Noise is usually small, momentary changes in the signal level. An example is the "static" that is heard in addition to the signal in AM radio.
Smoothing a signal removes some of the noise and improves the perceptual quality of the signal. This exercise is to smooth the values in an integer array.
Say that the original values are in the array "signal". Compute the smoothed array by doing this: Each value smooth[N] is the average of three values: signal[N-1], signal[N], and signal[N+1].
For the first element of smooth, average the first two elements of signal. For the last element of smooth, average the last two elements of signal.
here is the original data for the signal array.
int[] signal = {5, 5, 4, 5, 6, 6, 7, 6, 5, 4, 1, 4};i had to declare another array by the name of smooth.
int[] smooth Now i am having a big problem. here is the output of the program from author point of view using the original data in signal array.
C:\>java Smooth
signal: 1 5 4 5 7 6 8 6 5 4 5 4
smooth: 3 3 4 5 6 7 6 6 5 4 4 4
C:\>i got completely lost. the original signal data is replaced by a new one but how ? if i can get a more detail explanation on this problem by anyone it would be great. so i thought to assign some duke dollars if i can understand the logic not trying to be greedy but to see who is a good teacher. thanks.
once i get a good explanation i can go ahead and start coding and see if i can achieve this. i am pretty much sure it is a simple task but author made it looks like my worst nightmare.

here is the problem:-
An audio signal is sometimes stored as a list of int values. The values represent the intensity of the signal at successive time intervals. Of course, in a program the signal is represented with an array.
Often a small amount of noise is included in the signal. Noise is usually small, momentary changes in the signal level. An example is the "static" that is heard in addition to the signal in AM radio.
Smoothing a signal removes some of the noise and improves the perceptual quality of the signal. This exercise is to smooth the values in an integer array.
Say that the original values are in the array "signal". Compute the smoothed array by doing this: Each value smooth[N] is the average of three values: signal[N-1], signal[N], and signal[N+1].
For the first element of smooth, average the first two elements of signal. For the last element of smooth, average the last two elements of signal.
here is the original data for the signal array.
int[] signal = {5, 5, 4, 5, 6, 6, 7, 6, 5, 4, 1, 4};i had to declare another array by the name of smooth.
int[] smooth Now i am having a big problem. here is the output of the program from author point of view using the original data in signal array.
C:\>java Smooth
signal: 1 5 4 5 7 6 8 6 5 4 5 4
smooth: 3 3 4 5 6 7 6 6 5 4 4 4
C:\>i got completely lost. the original signal data is replaced by a new one but how ? if i can get a more detail explanation on this problem by anyone it would be great. so i thought to assign some duke dollars if i can understand the logic not trying to be greedy but to see who is a good teacher. thanks.
once i get a good explanation i can go ahead and start coding and see if i can achieve this. i am pretty much sure it is a simple task but author made it looks like my worst nightmare.

How can I disable the output of the domain name after a getent request?

I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
123.123.123.123 hostname.domainname
How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
Help, please?!

The enrty in Ur DS for name to ip resolution might
have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce

Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
Bibhu

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

How to hide the specified rows in the output of the report?

Hello all,
    I have a requirement where i have to hide some of the lines (<b>initial 6 lines</b> that is <b>6 rows</b>) in the output of the report.
How would I go about doing this?
Thanks for you time.

Hello Sai,
I believe this is query output ( e.g., )
Country   Sales
India        $100
USA        $200
Germany $300
You want to hide the line Germany $300
Case 1:
    If you can change the query, Filter on Country and exclude Germany
Case 2:
    If you can not change the query, use url appending and filter out Germany
Check webapi reference for the exact commands
Case 3:
    Only if you are using the NW2004s front-end, Report designer will be available for you. In this, you can delete the rows that you do not want and publish in web.
Case 1 and 2 solutions are available in older versions of front-end as well.
Regards,
Sheik Bilal

To get the output in the chart for a single selection

Similar Messages

Maybe you are looking for