To get the user exits and modification points

Hi Experts,
I am able to find all user exits for a particular transaction,but is there a way to find it for some specific actions alone.
Need to find the user exits and enhancement points that are called while clicking a specific button in a standard transaction.
Your help is highly appreciated.
Regards,
Sridevi

Hi
To find out the userexits at position where you need you should see the description of the USER EXIT.If you find that it is close to the point where you want then put up a break point inside it and re - run the transaction.
Also you can check SDN post to find out your user exit.
FOR BADI -
1 )You can put breakpoints at method GET_INSTANCE of class CL_EXITHANDLER and  CALL FUNCTION statements.
2) You can run through SPRO transaction for the particular Functional area and understand the available exits or BADIs .
Regards
Gaurav

Similar Messages

  • How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

    How do I get the user name and password for the Apple Extreme Router to set up my Slingbox?  It will not accept the Apple Extreme Name and password.

    The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
    There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
    There are no other "user names" or "passwords" on the AirPort Extreme.
    You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
    If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
    Resetting an AirPort Base Station or Time Capsule FAQ

  • Getting the user name and computer name

    I've been trying to find out how to do this, but can't seem to get it.
    I have an AIR application that needs to get the user's login name, and computer name for verification.  I can't find anywhere to do this.  Is AIR able to get this information? Is there work arounds if there isn't?
    It won't ever be a web app, just an AIR app.

    What I did in Air 2 to accomplish that is the following:
                   public function getHostName():void {
                        if(NativeProcess.isSupported) {
                             var OS:String = Capabilities.os.toLocaleLowerCase();
                             var file:File;
                             if (OS.indexOf('win') > -1) {
                                  //Executable in windows
                                  file = new File('C:\\Windows\\System32\\hostname.exe');
                             } else if (OS.indexOf('mac') > -1 ) {
                                  //Executable in mac
                             } else if (OS.indexOf('linux')) {
                                  //Executable in linux
                             var nativeProcessStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
                             nativeProcessStartupInfo.executable = file;
                             var process:NativeProcess = new NativeProcess();
                                  process.addEventListener(NativeProcessExitEvent.EXIT, onExitError);
                                  process.addEventListener(ProgressEvent.STANDARD_OUTPUT_DATA, onOutput);
                                  process.start(nativeProcessStartupInfo);
                                  process.closeInput();
                   import utls.StringHelper;
                   public function onOutput(event:ProgressEvent):void {
                        var strHelper:StringHelper = new StringHelper();
                        var output:String = event.target.standardOutput.readUTFBytes(event.target.standardOutput.bytesAvailable);
                             output = strHelper.trimBack(output, "\n");
                             output = strHelper.trimBack(output, "\r");
                        trace('"'+output+'"');
    The package that I used is from the manual:
    package utls
         public class StringHelper
              public function StringHelper()
              public function replace(str:String, oldSubStr:String, newSubStr:String):String {
                   return str.split(oldSubStr).join(newSubStr);
              public function trim(str:String, char:String):String {
                   return trimBack(trimFront(str, char), char);
              public function trimFront(str:String, char:String):String {
                   char = stringToCharacter(char);
                   if (str.charAt(0) == char) {
                        str = trimFront(str.substring(1), char);
                   return str;
              public function trimBack(str:String, char:String):String {
                   char = stringToCharacter(char);
                   if (str.charAt(str.length - 1) == char) {
                        str = trimBack(str.substring(0, str.length - 1), char);
                   return str;
              public function stringToCharacter(str:String):String {
                   if (str.length == 1) {
                        return str;
                   return str.slice(0, 1);
    And sorry for the miss topic I just realized that it is on flex topic, but I post it either way it may be useful for anyone

  • How to get the user exits Enhancement no.

    Hi All,
    How to get the following userexit  Enhancement no in SMOD transaction code.
    User Exit: J_1i7_userexit_exinv_addl_data
    Please help.

    Hi,
    These are the user exits not for the code implemention . These are called by the values given in the configuration. so u don't see any enhancement number for them .
    For more details refer this doc by clicking on find and give ur exit name.
    [Reference|http://allsapsdonline.blogspot.com/2008_10_01_archive.html]
    Rhea.

  • How to find the user exits and BADIS from SPRO

    Hi all,
    please let us know how to find the User exits or BADIS for an application from SPRO.
    Regards,
    Madhavi

    Hi Varisetty,
    Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
    For User Exit:
    Put "/h" in the command box (to start debugging)
    Execute your transaction
    When you enter debugging - put a breakpoint at statement
    CALL CUSTOMER-FUNCTION
    the control will stop at all calls to User Exits
    For BAdi (it's simpler)
    Go to class CL_EXITHANDLER in SE24
    Enter method GET_INSTANCE
    Put a breakpoint in this method
    Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
    Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
    Cheers,
    Adi

  • Migration of the User exits and reports to new ECC 6.0 from 4.6c

    Hello Everyone,
    we have lot of user exits and menu exits in 4.6c system... now we are implementing new ECC6.0 without much changes in Business process(as is)... my question is...is it possible to bring all the user exits reports and smartforms to new ECC6.0 using some transport mechanism...or do we need to copy and paste(upload and download) from the old system....
    regards,
    Gayatri Gaddam.

    Gayatri,
    check the fallowing similar link
    https://forums.sdn.sap.com/click.jspa?searchID=1744490&messageID=3040343
    ~~Guduri

  • How do i get the user id and responsibility id

    Hi
    I have coded my own jsp page and being given function in Oracle Apps in order to open my jsp page.
    Its opening properly.
    But i need to capture the user id and responsibility id of the person who logged in. I created the function in a particular responsibility only. I need to know the responsibility id and user id.
    I am using oracle 11.5.10. I know in previous versions with FWAppsContext. But in 11.5.10, i am not able to see the methods like getUserId() and getRespId() in FWAppsContext class.
    Please help me out, its very urgent.

    You can get the webAppsContext from your custom jsp using the following code.
    import oracle.apps.fnd.common.WebAppsContext;
    Import oracle.apps.fnd.common.WebRequestUtil;
    WebAppsContext webAppsContext = WebRequestUtil.validateContext(request, response);
    getUserId and getRespId are public methods which can be accessed through webAppsContext.

  • What's the meaning of thes user exit, and how to use it?

    Hi gurus,
    I found two exits, USEREXIT_PRICING_CHECK  and USEREXIT_XKOMV_ERGAENZEN_MANU , can somebody tell me how to use these.
    prmoise to reward helpful answers.
    thanks in advance.
    elly

    hi
    <b>
    USEREXIT_PRICING_CHECK</b> (module pool SAPMV61, program MV61AFZA)
    You can install additional checks to the standard checks of condition lines (e.g. maximum/minimum value).
    <b>USEREXIT_XKOMV_ERGAENZEN_MANU</b> (module pool SAPLV61A, program RV61AFZB)
    You can use this user exit to change the ready-for-input fields of the manually entered condition record in add mode in the condition screen.
    Just have look below link
    http://help.sap.com/saphelp_40b/helpdata/es/14/f62c7dd435d1118b3f0060b03ca329/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/14/f62c7dd435d1118b3f0060b03ca329/frameset.htm
    regards
    vinod

  • User Exit and BDC for ME22N

    Hello All,
    A code has been written in the User exit for Tcode ME22N, Which sets the indicator on PO line item. This has been done by modifying the standard itab POT by using field symbols, because the fields to be modified are shown in display mode in the tcode ME22N and cannot be done in BDC. See the below code in user exit ZXM06U43.
    DATA char(50) VALUE '(SAPLMEPO)POT[]'.
    CLEAR wa_ind.
        FIELD-SYMBOLS <f1> TYPE ANY.
    Move memory of internal table POT to field symbol f1.
        ASSIGN (char) TO <f1>.
    Move content of f1 to internal table i_ind
        i_ind[] = <f1> .
        LOOP AT i_ind INTO wa_ind.
          IF wa_ind-pstyp = '9'.            " Service PO - item category
    IF PO Line item has History per Purchasing Document as 'D'
    Set indicators on, for the line item.
            CLEAR v_cnt.
            SELECT COUNT( * ) INTO v_cnt FROM ent5100
                                         WHERE ebeln = wa_ind-ebeln
                                           AND ebelp = wa_ind-ebelp
                                           AND bewtp = 'D'.
            IF sy-subrc = 0.
              wa_ind-wepos = 'X'.            " Set Goods Receipt Indicator
              wa_ind-webre = 'X'.            " Set GR-based IV Indicator
              wa_ind-lebre = 'X'.            " Set Srv-based IV Indicator
            ELSE.
    *End of addition SAP-20070910104025 - SL36 - D01K963369
              wa_ind-wepos = ' '.            " Clear Goods Receipt Indicator
              wa_ind-webre = ' '.            " Clear GR-based IV Indicator
              wa_ind-lebre = ' '.            " Clear Srv-based IV Indicator
              wa_ind-xersy = ' '.            " Clear ERS Indicator
            ENDIF.                                           
            MODIFY i_ind FROM wa_ind INDEX sy-tabix.
          ENDIF.
        ENDLOOP.
        <f1> = i_ind[].
      ENDIF.          
    ENDIF.
    This code is in production and has been working fine.
    The requirnment is now to make this indicator work for all the Purchase order before this code has been written in the Exit. For this my functional suggests that to write a separate program using BDC for PO change and jus add a period/dot  in the short text and save it. The code has been written, the user exit and the above code is getting triggrred values are updated in internal table correctly.
    However the flags was not set or cleared when seen in the tcode ME22N . This works fine if the tcode me22n is run directly and not working in BDC.
    I have tried with ME22 without enjoy transaction in BDC changing the POT Program to SAPMM06E. It does not work.
    Please help me as why it is not uodating in the table when using BDC.
    Thanks in Advance.
    Senthil Kumar

    Hi All,
    Any luck on this??
    Thanks

  • To find the User Exits for a particular Transaction.

    hi,
        I want to find the number of User Exits for a The Transaction MM01 or MM02,
        I serched in the forums but could not find satisfactory ans,
        I tried with:
                 T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
        But its not helping me,
        Please help me.
    Thanks and Regards
    Suraj S Nair.

    hi ,
    if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
    create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
    Finding the user-exits of a SAP transaction code
    * Finding the user-exits of a SAP transaction code
    * Enter the transaction code in which you are looking for the user-exit
    * and it will list you the list of user-exits in the transaction code.
    * Also a drill down is possible which will help you to branch to SMOD.
    * Written by : SAP Basis, ABAP Programming and Other IMG Stuff
    *              http://www.sap-img.com
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    Regards,
    Prabhudas

  • Need a user exit or enhancement point for loading start button in VT02

    I have a requirement to write the code for loading start button and complete PGI as soon as loading start is checked in VT02(shipment transaction).
    Please suggest....

    HI Venkata,
    Below are the user exits and BADIs in the transaction VT01
    Enhancement
    V56UNUMB                                Shipment number allocation
    V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
    V56UCHCO                                Check shipments are complete
    V56UCHCH                                Shipment processing: Check whether changes were made
    V56TDLIF                                Filter Delivery Items for Shipment
    V56SLDET                                Shipment processing: Leg determination
    V56MVT04                                Extensions for Collective Processing of Shipments
    V56LOCID                                Shipment Processing: Determine Location Identification
    V56LDELI                                Read Delivery Data for Shipment Processing
    V56L0001                                Status of Shipments for a Delivery
    V56FSTAT                                Shipment processing: Activities when setting a status
    MV56AINI                                Initialization of transaction control for transportation
    V56USTAT                                User-individual definition of transportation planning status
    V56USVDO                                Update new objects for transport
    V56USVDP                                Preparation for updating new objects for transport?
    V56AFCCH                                Shipment processing: Check function code allowed
    V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
    V56ARCHV                                Customer-spec. checks for archiving shipments
    V56ATKTX                                Change the number of lines for text input in shipment
    V56BMOD                                 Transportation processing: Field modification
    V56DISTZ                                Shipment Processing: Determine Distance
    V56FCOPY                                Shipment processing: Copy delivery data
    Business Add-in
    BADI_V56N                               User Exit Transport - Message Determination
    BADI_LE_SHIPMENT                        BadI: Shipment Processing
    Regards,
    Radhika

  • Purchase order user exit / BADI / Enhancement points

    Hello  experts,
    Please Help me to get the user exit or any way to enhance the PO functionality. I am trying to set the PO line item status to "Blocked" or "Unblocked" whenever a change is triggered in PO line item for transactions Me21N / Me22N. The blocked status will be triggered by the custom enhancement, this is the requirement.
    Thanks in advance for your help.
    I tried the user exit MM06E005, but not working.
    - Nagarajan

    Hello  Nagarajan Ramudu,
    inside of MM06E005 you should try the function module EXIT_SAPMM06E_012,
    i'm using this user-exit from all things in my company.
    Regards,
    Welinton Rocha

  • ADF 11g + getting the user details in ADF BC layer

    Hello,
    I am using Jdeveloper build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.553
    How to get the user name and roles in ADF BC layer? . I need to get the username in entity layer,view layer and am layer.
    Is there way to write common method to get the username from session data??
    Any advice??
    Thanks
    RB

    Hi,
    You can get User name using EL ---adf.context.securityContext.userName
    and also using---getUserPrincipalName()
    Thanks,
    Vijay

  • What is the difference between User exit and BADI

    in user exit support to  4 types of exits(Menu exit,Screen exit,Field exit,Function module exit)in similar way  is badi  supported to all  type

    hi,
    BADIs (Business Add-Ins) are the new way in which SAP allows you to enter additional logic into an application, and is based on OO ABAP. (Methods in Interfaces) Transactions SE18/SE19.
    Customer Exits are the older method (which is still supported), whereby you create an include that is in a function module, which is called when the customer exit is activated. Transactions CMOD/SMOD.
    In terms of terminology, people often use the terms "Customer Exit" and "User Exit" interchangeably, however, strictly speaking, User Exits are places provided in subroutines (notably in the SD module) where you can insert your own code, but require a modification to an include (although it is provided for customers to change).
    They are two different methods to do the same thing: to check and update the data into std trx.
    The user-exit is the old concept based on function module
    The BADI is the new concept based on OO ABAP.
    So you can often to find a BADI and an USER-EXIT to do the same thing and you have to decide what you prefer to use.
    Anyway the new trx and the enjoy trx use BADIs as exit
    User-exits are SAP's oldest way of updating data in standard programs - see MV45AFZZ - Form Userexit_Save_Document_Prepare.
    Here you simply add ABAP code or add INCLUDES, etc
    Customer-exits were SAP's next generation. They are built on the concept of function modules - where you add your custom within the Z func modules.
    BADIs are SAP's newest and current way of updating data uisng Object-oriented concepts.
    Please check this link.
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Check the below links:
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
    http://www.sapfans.com/forums/viewtopic.php?t=172792
    User-Exit is a specific place in a transaction-process where SAP offers
    third parties to include there own business functionality. Actually
    User-Exit is the namespace used for Exits programmed by SAP specifically
    for SD. For the other modules it's called Customer-Exit.=20
    >Business Add-Ins (BADI) =20
    The use of object orientated code within SAP has lead to new method of
    enhancing standard SAP code called Business Add-Ins or BADI's for short.
    Although the implementation concept is based on classes, methods and
    inheritance you do not really have to understand this fully to implement
    a BADI.
    Difference between BADI's & User-Exit.
    1. Check the replies for your question which asked by another person.
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/569786
    2. Similar thread.
    http://www.sapfans.com/forums/viewtopic.php?p=559472&sid=99caa729618b18a8f7c46cc2f047af52
    3. Same question explained
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Badi Tutorials
    1. Sample program.
    http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
    2. Implementing BADI.
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    Hope it helps.
    3. From help.sap.com
    http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/frameset.htm
    Pls : award points if it is useful

  • How to get the user created at and modified at properties for a site collection using powershell

    Hi guys, I Know how to get the list of users of a site collection by Get-SPUser cmdlet but hte problem is that this cmdlet doesnt give me the user Created at and modifed at properties 
    can any one tell me how to get these values via powershell???? 
    ps: ignore the 2013 screenshot.. i just want a way to get those values .. if you provide me solution in either 2010 or 2013 , i will crack the other..
    plz guys help me ...

    Get the User Information list and then get the user from that list
    $web = Get-SPWeb "siteUrl"
    $userInfoList = $web.SiteUserInfoList
    $userItem = $userInfoList.Items[0]; #0 here is just for demonstration. You take the user you want here or loop through all users.
    $created = $userItem["Created"]
    $modified = $userItem["Modified"]

Maybe you are looking for