To_number gives error in one DB pl/sql program and not in other DB

Hi,
We have the following issue.. In some pl/sql code there is a statement
l_number := to_number(pio_value);
This results in DB-A in an error - invalid number.. in DB-B this codes works..
If in DB-A the NLS setting is changed
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_NUMERIC_CHARACTERS = ''.,''';
l_number := to_number(pio_value);
the code works also..
I assume this error has to do with difference in NLS settings.. However I cannot find any of those differences in the database NLS settings..
Are there other settings which can cause this behaviour?
regards, Richard

RichardK2 wrote:
Hi,
We have the following issue.. In some pl/sql code there is a statement
l_number := to_number(pio_value);
This results in DB-A in an error - invalid number.. in DB-B this codes works..
If in DB-A the NLS setting is changed
EXECUTE IMMEDIATE 'ALTER SESSION SET NLS_NUMERIC_CHARACTERS = ''.,''';
l_number := to_number(pio_value);
the code works also..
I assume this error has to do with difference in NLS settings.. However I cannot find any of those differences in the database NLS settings..
Are there other settings which can cause this behaviour?not data presentation settings; but data dependent error.
Error is thrown when variable PIO_VALUE contains non-numeric character

Similar Messages

Why can one mac access the internet and not the other?

Hi I have just installed a 2nd generation Airport Express base station. I have setup a network and I can connect to it to access the web. Here's the rub, only my Macbook Pro can connect. My Macbook Air cannot connect? A weird error message says (translated from Swedish): Airport has the selfapplied/selfselected IP adress 169.254.67.130 and will not be able to connect to the internet.
Why can one mac access the internet and not the other? Is there something simple that I can do to get more macs to be able to use my Airport Express to access the internet?
Tech details:
Airport Express 2nd generation (just purchased) model 1392
Macbook Pro running 10.8.2
MacBook Air running 10.6.8

It seems the Airbook assigns a dummy IP address so somehow it doesn't reach and receive an IP from the Express. I deleted the previous Express setting restarted the Air connected again, restarted the modem, restarted the Express nothing....
I spoke to the internet provider and the cable modem does not require any username or pw. from the modem to the cable it's one public ip, pure internet is flowing from the modem to the Express but the express doesn't seem to assign any IP address apart from the one assigned to the Macbook Pro.
Do you need a screendump of the settings on the functioning Mac or the faulty one? What settings are you interested in i.e. which tab should it shot?

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

Logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist

Hi,
Getting following error while trying to connect MySQL server to the MDM Import manager.
logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied
i have supplied the following paramter values.
Type : SQL server
Remote System : MDM
DBMS server : localhost
Database Name : testing
user: < MySQL user name>
password : < MySQL password>
pls let me know how can i solve this problem.
thanks

Refer the blog
/people/rupesh.kumar4/blog/2008/08/20/how-to-integrate-mdm-with-mysql-server-50
thanks
Rupesh

Jasper report on HTML when one image loaded from database and for the other

How to generate jasper report on HTML when one image loaded from database and for the other we give a image path
My code
ByteArrayOutputStream baos = new ByteArrayOutputStream();
          exporter = new JRHtmlExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, print);
          exporter.setParameter(JRExporterParameter.OUTPUT_STREAM, baos);
          exporter.setParameter(JRHtmlExporterParameter.IMAGES_URI, strImageInputDirectory);
     exporter.setParameter(JRHtmlExporterParameter.IMAGES_DIR_NAME, strImageOutputPath == null ? "." : strImageOutputPath);
     exporter.setParameter(JRHtmlExporterParameter.IS_OUTPUT_IMAGES_TO_DIR, Boolean.TRUE);
     exporter.setParameter(JRHtmlExporterParameter.IS_USING_IMAGES_TO_ALIGN, Boolean.FALSE);
     exporter.setParameter(JRHtmlExporterParameter.IS_WHITE_PAGE_BACKGROUND, Boolean.FALSE);
          exporter.exportReport();
          byte[] bdata = ((ByteArrayOutputStream) baos).toByteArray();
Can any one help pls
Message was edited by:
ameet.au

hey sorry for posting it in this forum.
but do u have sample code for making it work.. since i am able to do it on PDF format(image from Database and another stored in the webserver) using
byte image[] =(byte[]) outData.get("image");
                    ByteArrayInputStream img = new ByteArrayInputStream(image);
                    hmimg.put("P_PARAMV3", img);
print = JasperFillManager.fillReport(reportFileName, hmimg, jrxmlds);
bdata= JasperExportManager.exportReportToPdf(print);

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
Granted, not the same as completely offloading your library to a back-up drive at your location.
Good Luck!

I use i-tunes for backing tracks with an acoustic band...how can I get a playlist to play one song at a time and not go to the next one until I manually select it?

I use i-tunes for backing tracks. How can I set up a play list to play only one song at a time and not go to the next one until I manually select it?
Thanks

Uncheck all the songs in the playlist. iTunes will then play one song and stop.
Regards.

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. pleas

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working

anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the MANY other complaints with this same issue and nothing is working. How can this problem be corrected?

Hi,
Which operating system are you running on?
Are you upgrading from a previous version of Photoshop elements or is this your first?
Are you trying to load the organizer or the editor or do both fail?
Brian

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

? in SQL Queries and not using prepared statements

Using EclipseLink 1.1.1
Prepared Statements are disabled
In our production server something went wrong and one of our Read Queries started erroring. A DatabaseException was thrown and we log the "getQuery.getSQLString()" statement. We found this query in the logs:
SELECT t1.ID, t1.NAME, t1.DESCRIPTION, t1.EXTREFID, t1.STYLESHEET, t1.DDSVNVERSION, t1.FIRSTNAME, t1.LASTNAME, t1.EMAILADDR, t1.PHONENUMBER, t1.ADDRESS, t1.ADDRESS2, t1.CITY, t1.STATE, t1.POSTALCODE, t1.COUNTRY, t1.ADMINACCTNAME, t1.HASDOCUMENTS, t1.HASTIMEDNOTIFICATIONS, t1.STATUS, t1.ENTRYDATE, t1.EVALEXPDATE, t1.LASTREMINDDATE, t1.FULLUSERS, t1.LIMUSERS, t1.REQUSERS, t1.ISENTERPRISE, t1.EXPDATE, t1.ISDISABLED, t1.DISABLEDDATE, t1.NEEDLICENSEAGREEMENT, t1.ISWARNINGDISABLED, t1.LOCALE, t1.TIMEZONE, t1.CURRENCY, t1.DOMAIN, t1.DOCUMENTSIZE, t1.EXTRADOCUMENTSTORAGE, t1.ONDEMANDOPTIONS, t1.SSOTYPE, t1.RESELLERID, t1.ACCOUNTREPID, t1.LASTUSAGEREPORTDATE, t1.NEXTUSAGEREPORTDATE, t1.USAGEREPORTATTEMPTS FROM T_SSOOPTIONS t0, T_CUSTOMERS t1 WHERE *((((t0.SSOENABLED = ?) AND (t1.SSOTYPE IN (?, ?))) AND (UPPER(t1.DOMAIN) = ?)) AND (t0.CUSTOMERID = t1.ID))*
Notice the values weren't entered into the where clause. We had to bounce the application to fix the problem. I've never seen this before. I've added more debugging statements to the code - so if this happens again in the future I'll have more information to report on. In the mean time I'm wondering if anyone else has every seen a problem of this nature.

Database error due to invalid SQL statement.
I don't have a stack, we were catching the exception and not printing the stack :(
Like I mentioned in my first post, I added more debugging code (e.printStackTrace()). I understand this is hard to track down without more information. I was just hoping you guys had seen something like this before and had any insight. Like I mentioned before: this is on our production server. I've never seen this type of error before. That particular server (we run in a cluster mode) had been up for several days and then started generating that error. IT bounced the node and everything went back to normal. We have been using toplink for about 5 years now and have never seen this problem, until August 3rd 2009. The only thing that has changed recently is our migration from toplink 10 to EclipseLink. I was wondering if anyone knows if anything had changed in EclipseLink/toplink 11 with the generation of SQL queries.
I'll keep looking. There is more debugging code in there now. Since the error was "Database error due to invalid SQL statement" this implies the SQL was generated, exited that part of the code and was sent to the db where it failed. I'm afraid the printStackTrace won't help if this error happens again.

To_number gives error in one DB pl/sql program and not in other DB

Similar Messages

Maybe you are looking for