To perform Joins B/W RA_Customer table and oe_order_headers_all

how can i make a join to get the Customer_Name and Customer_Number from RA_Customer table and oe_order_headers_all and oe_order_lines_all......thanks in advance
thanks,
Sunil Chauhan.

how can i make a join to get the Customer_Name and Customer_Number from RA_Customer table and oe_order_headers_all and oe_order_lines_all......thanks in advancePlease see these docs for examples on how to join those three tables.
Multiple Language Request For Sales Order Acknowledgment Has Performance Issue [ID 1275133.1]
Shipment History Data Are Not Populated In Dp [ID 889057.1]
Disc0unt Did Not Apply To Sales Order Line With Volume Offer As Modifier [ID 1415593.1]
Thanks,
Hussein

Similar Messages

Multiple 'logical joins' between a fact table and one dimension table

It appears that one cannot create multiple ‘logical joins’ between a fact table and one dimension table in OBIEE using the Oracle BI Administration Tool. For example, considering a Business Model with a dimension table TIMES and a fact table FACT containing START_TIME and END_TIME, we would like to create separate logical joins from FACT to TIMES for the START_TIMEs and END_TIMEs? Obviously, the underlying foreign keys can be created, but as far as I can tell the Oracle BI Administration Tool doesn’t support this. The workaround would be to replicate the TIMES table, but that’s ugly.
I seek an alternative approach.

Try this. Create an two aliases for the TIMES dimension (Start & End) in the Physical Layer and then remove foreign key to the "Parent" Times dimension. Create the Foreign Key in the Physical Layer to the new aliases and then create the complex joins in the BMM Layer to the new aliases as well. This will allow you to present both dates within the same table in the Presentation Layer. Not the most elegant solution but it works.

On submit perform an insert on one table and an update on aother table

I am trying to perform and insert on the table one table (the wizard created my form the insert is going against the table that I created using the wizard) and on the form is on field that is also in another table. Therefore, I am trying to perform an update on one attribute of one table and a insert into another table. How do I do this in apex?

If you have used wizard to create form, then you may see a process of type 'Automatic Row Processing (DML)' in your page which will perform INSERT/UPDATE/DELETE on your form table. Here you can see APEX performs INSERT only when REQUEST is in 'INSERT, CREATE, CREATE_AGAIN, CREATEAGAIN'
So create one more PL/SQL page process which will execute at 'on Submit after validations' and write update process as follows
begin
-- pseudo table/columns
update tbl_second
set col1 = :p1_item
where pk_col = :p1_pk_item;
end;Make this process conditional so that it will perform UPDATE only when request value is in 'INSERT, CREATE, CREATE_AGAIN, CREATEAGAIN' ( i.e. only when you are inserting into your form table)
Cheers,
Hari
p.s. I think you may also need to update the second table when some-one updates your form table.
Edited by: Hari_639 on Oct 26, 2009 9:46 AM

Please help to provide a join for the three tables and output as per list

to produce a report to list out all condition records for output and pricing.
usage app procedure step counter cod type description access seq 
accseqnum cond table sales org doctype customer channel sale doc type
the above list of fields from tables t683s ,t685,and t682i to be pulled, i need an inner join
regards
ksrao

Hi,
check the site www.alvrobot.com.ar
you can create a report over there using inner join just by providing simple information
follow step by step procedure and create a report
Reward points if usefull.

Joins between AP Invoices tables and supplier tables.

Hi Gurus,
Hope you all are doing good.
I require one urgent help from all of you.
I want some data from bellow tables.
ap.ap_invoice_distributions_all
ap.ap_invoice_lines_all
ap.ap_invoices_all
ap.ap_suppliers
ap.ap_supplier_sites_all
ap.ap_tax_codes_all
When I am joining these tables it is taking a lots of time to return the record.
Mostly all the tables have more then 2536689 count.
Could any body just give me the best joining condition for the above tables so I can validate the join.
Its Urgent.

ap.ap_invoice_distributions_all > join on tax_code_id to ap_tax_codes_all.tax_id
ap.ap_invoice_distributions_all > join on invoice_id to ap.ap_invoices_all
ap.ap_invoices_all > join on vendor_id to po_vendors
ap.ap_invoices_all > join on vendor_id and vendor_site_id to po_vendor_sites
Hope this helps,
Sandeep Gandhi

Link between ZX tax tables and gl_code_combinations table in R12

Hi All,
I am new to Oracle apps. We are upgrading from EBS 11i to R12.1.3. In it, ar_vat_tax is obolete. I know its replacement is ZX_rates_b table. But in 11i, they are connected using
ar_vat_tax.tax_account_id = gl_code_combinations.code_combination_id
Now I am not able to find the join between zx tax tables and gl_code_combinations. Can anyone please help how to link these ZX tax table to gl_code_combinations???
Regards,
Swapnil K.

Resolved the issue.
There is a table called ZX_ACCOUNTS. Use the column tax_account_ccid in it. Link ZX_ACCOUNTS.tax_account_entity_id to ZX_RATES_B.tax_rate_id.
Regards,
Swapnil K.

JOINING local table and DB Link table performance

Hellou everybody,
can somebody tell me how it is work in Oracle DB when you want to join some local table and DB Link table for example:
Select a.col1, b.col2
from local_table a , remote_table@dblink b
where a.key = b.key;
and when I use DRIVING_SITE hint and the all data from remote table is transforming (pushing) into my DB (in some temporar space), it will transform although Indexes from remote table?
So when I use some JOINS, this joins will be fast enought? Will they using remote table indexes to query the data or not?
Thank you for response.
Zoffob

user10708026 wrote:
Is it as simple as:No. Use:
UPDATE habitationalsupplement live_hab
   SET primaryheatingapparatuscode = (
                                       SELECT hab_backup.primaryheatingapparatuscode
                                         FROM habitationalsupplement@backupdb hab_backup
                                         WHERE hab_backup.itemobjectid = live_hab.itemobjectid
                                           AND hab_backup.itemversionnumber = live_hab.itemversionnumber
WHERE (itemobjectid,itemversionnumber) IN (
                                             SELECT hab_backup.itemobjectid,
                                                     hab_backup.itemversionnumber
                                               FROM habitationalsupplement@backupdb hab_backup
/SY.

How to provide joins between oracle tables and sql server tables

Hi,
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server.
how to provide joins between oracle tables and sql server tables ? Any help on this
Regards,
Malli

user10675696 wrote:
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server. Bad idea most times. Heterogeneous joins do not exactly scale and performance can be severely degraded by network speed and b/w availability. And there is nothing you can do in the application and database layers to address performance issue at the network level in this case - your code's performance is simply at the mercy of network performance. With a single glaring fact - network performance is continually degrading. All the time. Always. Until it is upgraded. When the performance degradation starts all over again.
If the tables are not small (few 1000 rows each) and row volumes static, I would not consider doing a heterogeneous join. Instead I would rather go for a materialised view on the Oracle side, use a proper table and index structure, and do a local database join.

Expand the Warehouse tables X adding physical tables and joins

I was questioned about these options:
a) Add physical tables (from other DBs) and modifying the physical model with new joins + modifying logical model to include new columns
b) Expand warehouse tables to include new columns in the tables. Doing a complementar ETL in order to feed the additional columns with data. Logical model would be updated but the idea in this option is to avoid joins in the physical layer.
My understanding is that option a) despite the joins in the physical layer would be a better strategy.
Pls. I'd appreciate any comments on the performance side or in the amount of effort to create the complementar ETL...
Txs.
Antonio

Hi Lombo,
I am not sure about what you mean with option a. In my understanding, you are asking for a comparison between:
a) adding data from an additional source in the RPD:
This means that you have to create an additional data source in the physical layer. I do not think you can create relations between physical tables sourced from different data sources in your physical layer. This means that the data is related in the logical layer. By doing this, the BI Server has to join the data from both sources for each front-end request. Also, it will have to perform the last aggregations instead of shipping it to the database. This is a big performance hit in terms of response time.
However! It can be much and much faster in terms of development effort required to support this. If it's only a limited number of columns and tables being added, this may be a valid option. You can also use this approach to prototype option b.
b) adding data from an additional source using ETL:
Quite some work in terms of development effort. However, all complexity and performance hits are moved to the bottom of the stack and process: database and ETL. You will need to create an additional data source in the DAC, additional custom folder(s) in Informatica and the ETL logic to update the existing tables and/or load new tables.
Additionaly, you need to expand the RPD with the new columns / tables, just as you would do in option a. However, now it will be sourced from the same datasource: less work for the BI Server to deliver the dataset to satisfy the request.
So basically, I would consider:
- How does the system currently perform: response times in the front end ( bad -> go for option b )
- How many columns will be added and how often will they be used in the front-end
- Informatica / DAC / OBI expertise available
- How long do you have to facilitate reporting on data from the 2nd source
Good luck!

Prcedure to joining of two tables and pls explore the primary & foriegn key

Dear All,
Am new to this forum looking forward to have some discussions and guidance reg ABAP.
My query is
what is the prcedure to joining of two tables and pls explore the primary & foriegn key relationships.
Your kind help is required in this query .
Thanks n regards
Carol P

Hi Carol,
Joining two tables fetch data from tables that has relevent entry based on the keys. like LIKP and LIPS these are delivery tables. if the business requirement is fetching delivery data that are exists in both two tables. here LIKP will conatins a single entry against a condition and LIPS may contains several entry because one delivery may has multiple line items. so, fetch the data joining the two tables on vbeln that is delivrey number. this is used to increase the performance of the program except for all entries.
Foreign key is poiting twowards primary key; it may be 1:1 , 1:many and many:many. if field1 of table a is pointing towards field1 of table b. then based on these condition at the time of entry SAP will check how many entry can be entred in field1 of table a.
regards
Krishnendu

Inner join on Buffred table and not buffered table.

Hi guys,
   Can you suggest me how can i write select query using inner join on buffered table and not buffered table. i written like this. is it right?
SELECT a~vbeln
         a~vkorg
         a~kunnr
         a~kunag
         a~wadat_ist
         a~xblnr
         b~bukrs
   FROM likp AS a INNER JOIN tvko AS b
    ON avkorg = bvkorg BYPASSING BUFFER
INTO TABLE itab_likp
WHERE vbeln = s_vbeln.
Thanks.
RAJ

Hi Raj ,
Please find below my Commentes :
1. When you use "Bypassing buffer" clause in Select statement , the data what is there in the buffer of application sever is always ignored and Read is performed from the Physical database always. This Clause is advisable where you require realtime data (Not recommended generally in reporting)
2. It is advisable that you should not use small table in the innerjoin with big table. In the query you have written there are 2 tables:- LIKP and TVKO outof which TVKO is a master table containing very few records than LIKP (Contains huge data for Delivery header).
So my recommendation will be : -
1. Eliminate the "Bypassing Buffer" clause from your Query
2. Break the select query into 2 select queries breaking the join and with some ABAP logic populate the Internal table "itab_likp".
This will be optimum way inwhich you can write the select query for your senarion. Also Ensure that indexes are being used for better selectivity.
Hope this will help to you.
Regards,
Nikhil

Partition Eliminiation on views and joins with other partitioned tables

I have a bunch of tables that are daily partioned and other which are not. We constantly join all these tables. I have noticed that partition elimination doesn't happen in most cases and I want some input or pointers on these.
Case 1
We have a view that joins a couple of partitioned tables on the id fileds and they the partition key is timestamp with local time zone.
TABLEA
tableaid
atime
TABLEB
tablebid
tableaid
btime
The view basically joins on tableaid, a.tableaid = b.tableaid(+) and a bunch of other non partitioned tables. atime and btime are the individal partition keys in the tables and these time do not match up like the id's in other words there is a little bit of correlation but they can be very different.
When I run a query against the view providing a time range for btime, I see partition elimination on tabled in the explain plan with KEY on Pstart/Pstop. But its a full tablescan on tablea. I was hoping there would be somekind of partition elimination here since its also partioned daily on the same datatype timestamp with local time zone.
Case 2
I have a couple of more partitioned tables
TABELC
tablecid
tablebid
ctime
TABLED
tabledid
tablebid
dtime
As you can see these tables are joined with tablebid and the times here generally correlate to tableb's timestamp as well.
Sub Case 1
When I join these tables to the view and give a time range on btime, I see partition elimination happening on tableb but not on tablea or any of the other tables.
Sub Case 2
Then I got rid of the view, wrote a query that us similar to the view where I join on tableaid (tablea and tableb), then on tablebid (tableb, tablec and tabled) and a few other tables and execute the query with some time range on btime and I still see that partition elimination happens only on tableb.
I thought that if other tables are also partitioned on a similark key that partition eliminition should happen? Or what am I missing here that is preventing from partition elimination on the other tables.

Performance is of utmost importance and partition pruning is going to help in that. I guess that's what I'm trying to acheive.
To achive partition elimination on tablec, d, etc I'm doing an outer join with btime and that seems to work. Also since most of the time after the partition elimination, I don't need a full tablescan since the period I will be querying most of the time will be small I also created a local index on id field that I'm using to join so that it can do a "TABLE ACCESS BY LOCAL INDEX ROWID" this way it should peform better than a global index since the index traversal path should be small when compared to the global index.
Of couse I still have problem with the tablea not being pruned, since I cannot do an outer join on two fields in the same table (id and time). So might just include the time criteria again and may be increase the time range a little more when compared to what the actual user submitted to try not to miss those rows.
Any suggestions is always welcome.

Difference between Temp table and Variable table and which one is better performance wise?

Hello,
Anyone could you explain What is difference between Temp Table (#, ##) and Variable table (DECLARE @V TABLE (EMP_ID INT)) ?
Which one is recommended to use for better performance?
also Is it possible to create CLUSTER and NONCLUSTER Index on Variable table?
In my case: 1-2 days transactional data are more than 3-4 Millions. I tried using both # and table variable and found table variable is faster.
Is that Table variable using Memory or Disk space?
Thanks Shiven:) If Answer is Helpful, Please Vote

Check following link to see differences b/w TempTable & TableVariable: http://sqlwithmanoj.com/2010/05/15/temporary-tables-vs-table-variables/
TempTables & TableVariables both use memory & tempDB in similar manner, check this blog post: http://sqlwithmanoj.com/2010/07/20/table-variables-are-not-stored-in-memory-but-in-tempdb/
Performance wise if you are dealing with millions of records then TempTable is ideal, as you can create explicit indexes on top of them. But if there are less records then TableVariables are good suited.
On Tables Variable explicit index are not allowed, if you define a PK column, then a Clustered Index will be created automatically.
But it also depends upon specific scenarios you are dealing with , can you share it?
~manoj | email: http://scr.im/m22g
http://sqlwithmanoj.wordpress.com
MCCA 2011 | My FB Page

Link for BUT000 table and ADRC in CRM and inner join is not working in PCUI

Hi Gurus,
   Please tell me the link btween BUT000 and ADRC table. and i wrote one inner join between BUT000 and BUT0id table but it not working. I m in CRM 4.0 version working with PCUI.
select but000partner but000name_org1 but000name_org2 but000bus_sort1 but0id~parnter1
      but0ididnumber from but000 inner join but0id on but0idpartner = but000~parnter
into corresponding fields of table it_result where partner in s_partner.
It is giving error as partner unknown from but000 table. I delcared everything and tried with alias names also.
please clarify me.
regards,
Ramakrishna.

Hi Frederic,
   thanks a lot. But is inner join between BUT000 and BUT0ID will work. for me it is not working. plesae see this code.
tables : but000,
         but0id,
         crmm_but_custno,
         adrc.
types : begin of typ_but000,
        partner type bu_partner,
        name_org1 type BU_NAMEOR1,
        name_org2 type BU_NAMEOR2,
        bu_sort1 type BU_SORT1,
        idnumber type BU_ID_NUMBER,
        partner1 type bu_partner,
        end of typ_but000.
data: lt_but000 type table of typ_but000,
      ls_but000 like line of lt_but000.
*select-options : s_partnr for but000-partner.
start-of-selection.
      select but000partner but000name_org1 but000name_org2 but000bu_sort1 but0id~parnter1
                but0id~idnumber into corresponding fields of table lt_but000 from but000
                inner join but0id on but0idpartner = but000parnter. " where partner in s_partner.
it is giving error as but000-partner is not know or but0id-partner not known.
So, i think if it not works then i should write two select stmts.
please clarify me.
i gave u rating.
thanks
ramakrishna.

Exception raised while trying to join Table and Stream

I have written a sample Project to fetch the data from a Table and join it with the Input Stream. Followed the same procedure specified at http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14301/processorcql.htm#CIHCCADG
I am getting the exception:
<Error> <Deployment> <BEA-2045016> <The application context "Plugin" could not be started. Could not initialize component "<unknown>":
Invalid statement: "select PROMOTIONAL_ORDER.ORDER_ID as orderId ,PROMOTIONAL_ORDER.UFD_ID as ufdId, PROMOTIONAL_ORDER.WEB_USER_ID as webUserId
 from helloworldInputChannel [now] as dataStream, PROMOTIONAL_ORDER where >>PROMOTIONAL_ORDER.ORDER_ID = dataStream.ORDER_ID<<"
Cause: wrong number or types of arguments in call to et
Action: Check the spelling of the registered function. Also confirm that its call is correct and its parameters are of correct datatypes.>
If the where condition is removed then the application runs fine fetching the data from the Tables.
Following is the config.xml for processor:
======================================
<?xml version="1.0" encoding="UTF-8"?>
<n1:config xmlns:n1="http://www.bea.com/ns/wlevs/config/application">
 <processor>
 <name>helloworldProcessor</name>
 <rules>
 <query id="dummyRule"> <![CDATA[
 select PROMOTIONAL_ORDER.ORDER_ID as orderId ,PROMOTIONAL_ORDER.UFD_ID as ufdId, PROMOTIONAL_ORDER.WEB_USER_ID as webUserId
 from helloworldInputChannel [now] as dataStream, PROMOTIONAL_ORDER where PROMOTIONAL_ORDER.ORDER_ID = dataStream.ORDER_ID
 ]]></query>
 </rules>
 </processor>
</n1:config>
Following is the assembly file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:osgi="http://www.springframework.org/schema/osgi"
 xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
 xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd">
 <wlevs:event-type-repository>
 <wlevs:event-type type-name="CorpInterfaceEvent">
 <wlevs:class>com.bea.wlevs.event.example.helloworld.CorpInterfaceEvent</wlevs:class>
 </wlevs:event-type>
 <wlevs:event-type type-name="PromotionalOrderEvent">
 <wlevs:properties>
 <wlevs:property name="ORDER_ID" type="bigint" />
 <wlevs:property name="UFD_ID" type="bigint"/>
 <wlevs:property name="WEB_USER_ID" type="bigint" />
 </wlevs:properties>
 </wlevs:event-type>
 <wlevs:event-type type-name="DummyEvent">
 <wlevs:properties>
 <wlevs:property name="ORDER_ID" type="bigint" />
 <wlevs:property name="UFD_ID" type="bigint"/>
 <wlevs:property name="WEB_USER_ID" type="bigint" />
 </wlevs:properties>
 </wlevs:event-type>
 </wlevs:event-type-repository>
 
 <wlevs:adapter id="helloworldAdapter"
 class="com.bea.wlevs.adapter.example.helloworld.HelloWorldAdapter">
 <wlevs:instance-property name="message"
 value="HelloWorld - the current time is:" />
 </wlevs:adapter>
 <wlevs:channel id="helloworldInputChannel" event-type="CorpInterfaceEvent">
 <wlevs:listener ref="helloworldProcessor" />
 <wlevs:source ref="helloworldAdapter" />
 </wlevs:channel>
 
 <wlevs:processor id="helloworldProcessor">
 <wlevs:table-source ref="PROMOTIONAL_ORDER" />
 </wlevs:processor>
 <wlevs:channel id="helloworldOutputChannel" event-type="CorpInterfaceEvent"
 advertise="true">
 <wlevs:listener>
 <bean class="com.bea.wlevs.example.helloworld.HelloWorldBean" />
 </wlevs:listener>
 <wlevs:source ref="helloworldProcessor" />
 </wlevs:channel>
 <wlevs:table id="PROMOTIONAL_ORDER" event-type="PromotionalOrderEvent"
 data-source="wlevsDatasource" />
</beans>
CorpInterfaceEvent.java:
package com.bea.wlevs.event.example.helloworld;
public class CorpInterfaceEvent {
private Long orderId;
public Long ORDER_ID;
private Long ufdId;
private Long webUserId;
public CorpInterfaceEvent(){
 super();
public Long getOrderId() {
 return orderId;
public void setOrderId(Long orderId) {
 this.orderId = orderId;
public Long getORDER_ID() {
 return ORDER_ID;
public void setORDER_ID(Long oRDERID) {
 ORDER_ID = oRDERID;
public Long getUfdId() {
 return ufdId;
public void setUfdId(Long ufdId) {
 this.ufdId = ufdId;
public Long getWebUserId() {
 return webUserId;
public void setWebUserId(Long webUserId) {
 this.webUserId = webUserId;
Adapter:
/* (c) 2006-2009 Oracle. All rights reserved. */
package com.bea.wlevs.adapter.example.helloworld;
import java.math.BigDecimal;
import java.text.DateFormat;
import java.util.Date;
import com.bea.wlevs.ede.api.RunnableBean;
import com.bea.wlevs.ede.api.StreamSender;
import com.bea.wlevs.ede.api.StreamSource;
import com.bea.wlevs.event.example.helloworld.CorpInterfaceEvent;
public class HelloWorldAdapter implements RunnableBean, StreamSource {
private static final int SLEEP_MILLIS = 300;
private DateFormat dateFormat;
private String message;
private boolean suspended;
private StreamSender eventSender;
public HelloWorldAdapter() {
super();
dateFormat = DateFormat.getTimeInstance();
/* (non-Javadoc)
* @see java.lang.Runnable#run()
public void run() {
suspended = false;
while (!isSuspended()) { // Generate messages forever...
generateHelloMessage();
suspend();// This would generate the messages only once..
try {
synchronized (this) {
wait(SLEEP_MILLIS);
} catch (InterruptedException e) {
e.printStackTrace();
public void setMessage(String message) {
this.message = message;
private void generateHelloMessage() {
String message = this.message + dateFormat.format(new Date());
CorpInterfaceEvent event = new CorpInterfaceEvent();
//event.setOrderId(1);
event.setORDER_ID(Long.valueOf(1));
eventSender.sendInsertEvent(event);
/* (non-Javadoc)
* @see com.bea.wlevs.ede.api.StreamSource#setEventSender(com.bea.wlevs.ede.api.StreamSender)
public void setEventSender(StreamSender sender) {
eventSender = sender;
/* (non-Javadoc)
* @see com.bea.wlevs.ede.api.SuspendableBean#suspend()
public synchronized void suspend() {
suspended = true;
private synchronized boolean isSuspended() {
return suspended;
Kindly let me know if you need further info.

Issue identified. The datatypes of the stream order id and the one from the tables differ.
The Long could not be casted to the bigint format of CQL.
On changing the datatype of ORDER_ID in the CorpInterfaceEvent to int, the join is successful.

To perform Joins B/W RA_Customer table and oe_order_headers_all

Similar Messages

Maybe you are looking for