To print invoice amont on the specified position

We want to print the invoice amount on the specified position. For printing we are giving multiple invoices, the invoice amount must appeare at the specified position. Please help urgently.

Ritesh,
Look at the Oracle Reports 6i demos, which came on a seperate cd. We have an invoice and check demo that sounds like what you are trying to accomplish. You design really depends on what data you expect to print on the invoice. Keeping the group frame fixed is a way to keep information from shifting during formatting. Hope this helps.
Regards,
The Oracle Reports Team jls

Similar Messages

Printing a Table in the Form

Hi Experts..
I would like to print the box below like this in a Form..
Plz any one can help me clearly with coding.
Service
Person
Rate
Amount
|----
7.6cm
1.4cm
-1.7cm-
-- 2.3 cm -
Headings height -- 0.5 cm
Body of table height -- 9 cm
I am Trying to print with WRITE_FORM WITH Element
But it is taking too much space & it is not printing all the fields in the same line & not printing the box.
Even I want to print the boxes exactly like above in form layout.. plz send me the code ASAP
Thanks & Regards
Rajendra

hi
Use the BOX command
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP/4 numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
this is a very time consuming task. well, hope this will help you
/E   HEADING
/:   BOX XPOS 0 CM YPOS 0 CM WIDTH '1.5' CM HEIGHT 10 CM FRAME 10 TW
/:   BOX XPOS '1.5' CM YPOS 0 CM WIDTH 4 CM HEIGHT 10 CM FRAME 10 TW
/:   BOX XPOS '5.5' CM YPOS 0 CM WIDTH '3.5' CM HEIGHT 10 CM FRAME 10 TW
/:   BOX XPOS 9 CM YPOS 0 CM WIDTH '2.5' CM HEIGHT 10 CM FRAME 10 TW
/:   BOX XPOS '11.5' CM YPOS 0 CM WIDTH '3.5' CM HEIGHT 10 CM FRAME 10 TW
/:   BOX XPOS 15 CM YPOS 0 CM WIDTH '1.5' CM HEIGHT 10 CM FRAME 10 TW
/E
DETAILS
   &IT_FINAL-WERKS&,,&IT_FINAL-NAME1&,,&IT_FINAL-PSTAT&,, &IT_FINAL-PRCTR&
=    ,,&IT_FINAL-MINLS&,,&IT_FINAL-MAXLS&
Regards,
Richa

Print invoice for bought online products

Hi,
not sure if this is the right section...anyway I bought me MBP in the online store (via the website of apple). Unfortunately, it shipped without an invoice. I expected to be able to print it by myself then via the online store. Indeed this option can be found in the account menu, but everytime I click on it I end up on the website that shows me the history of made orders of the past x-days without seeing any button or hint whatsoever that allows me to print a bill for a bought product.
I really need a printed invoice - how do I get it?
Regards,

View or Print Invoice
Once an item is billed, Apple creates an invoice. You can view or print individual invoices for each item on your order.
To view or print your invoice, log in to online Order Status and click the View Orders button. Click the Print Invoices link on the Your Orders page to get a printable image of your invoice(s).
If you need assistance with viewing or printing your invoice, please contact an Apple Online Store representative 1-800-676-2775.

NEED TO PLACE THE RECORDS POSITION BASED IN THE UNIX APPLICATION SERVER

HI GURUS,
My internal table has 5 fields I have to palce these 5 fields in the application server(/var/opt...) at position based. Each field has to place in different position in the same row in the application server..
please help me ....
reward asure,
with regards,
Thambe.

Hi Thambe,
Can u be more clear on ur requirement. Find below solution as per my understanding.
DATA: l_data TYPE string.
OPEN DATASET po_file FOR OUTPUT IN TEXT MODE.
CHECK sy-subrc IS INITIAL.
LOOP AT itab INTO wa.
CLEAR l_data.
l_data = wa-f1.
l_data+10(5) = wa-f2.
l_data+20(10) = wa-f3.
l_data+50(8) = wa-f4.
l_data+100(20) = wa-f5.
TRANSFER l_data TO po_file.
ENDLOOP.
CLOSE DATASET po_file.
In the Above code at the time of transfer l_data contains all the 5 fields at the specified positions. U can specify the offsets and positions as per ur requirement.
Thanks,
Vinod.

Printing Invoice Appendix On Last Page Of Each Invoice

Hello,
I have to print "Invoice Appendix" at the last page Of each Invoice Print Report.
Invoice Appendix is coming properly if u run for a single Invoice as i have used section Break as bellow-
Start Of Invoice Header
Start Of Invoice Lines
End Of Invoice Lines
End Of Invoice Header
--------------<Section Break>------------
Start Of Invoice Appendix
End Of Invoice Appendix
But when i run the report for multiple Invoice "Invoice Appendix" print only on last page of the last Invoice.
Can you please Help me, I need Invoice Appendix should display for every Invoice at the last Page. i'm using xmlp 5.6.1
Regards,
Aanta.

Hi Aanta
You need to be on 5.6.2 release, you can then use the last page only feature to do this. Check the user guide for details.
Regards, tim

Always cannot put emacs on specified position in dwm

`emacs -geometry 176x34+0+369` always canot appear at the specified position in floating workspace.
it works great on xmonad and stumpwm but NOT on dwm.
Sincerely!

sw2wolf wrote:`emacs -geometry 176x34+0+369`
According to the emacs manpage, you will need '--geometry' instead of '-geometry' (two dashes!)
Does it float, at least?
Otherwise (only in the case where it doesn't float (which would seem weird)) have you tried explicitely toggling the 'isfloating' rule for emacs windows? Or if you want it for specific emacs windows only, you can use the --title option to identify the one window you want to float at a given position (it's what I do with my scratchpad window).
I can't test, since I have no 'floating' layout in my setup.

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
            fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
            createDeployment.Add(xName);
            createDeployment.Add(xPackageUrl);
            createDeployment.Add(xLabel);
            createDeployment.Add(xConfiguration);
            createDeployment.Add(xStartDeployment);
            createDeployment.Add(xTreatWarningsAsError);
            requestBody.Add(createDeployment);
            requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
                uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
            responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
            request.Method = method;
            request.Headers.Add("x-ms-Version", version);
            request.ClientCertificates.Add(certificate);
            request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
                        requestStream, System.Text.UTF8Encoding.UTF8))
                        requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
                response = (HttpWebResponse)ex.Response;
try
                statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
                        responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
                    requestId = response.Headers["x-ms-request-id"];
finally
                response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                    uri.ToString(),
Environment.NewLine,
                    (int)statusCode,
                    statusCode,
                    responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum

Tab canvas does not put the items in their specified positions

Hi all,
I have created a form with a tab canvas with three tab pages, each page has it's own text items.
I saved this form without any problems.
When i open this form again, i found that, some of the items in the first tab page are not put in their positions in this page, although the x position and y position is still correct in the property pallette.
i overcome this by moving these items with the mouse to any direction and returning it back, but the problem comes after saving and trying to open the form again.
Not : this occures only in the first tab page, i tried to swap the second tab page(page7) with the first tab page (page6), now the problem occures with page7(which became the first after swap) .
Please help

Yes, the items are in a frame.
Both automatically and locked for the frame upate layout property causes the problem.
I want to tell that the form in run time is ok, but in the forms builder the text items are not in their specified positions.
Then when changing any property for the items even if it was not related to the item position, the item is then displayed in the correct position.

How do I remove "printinvoicesRedirect.jsp and the https file from printed invoices

I am printing invoices and a line of test appears on top and bottom of sheet. Top left reads "printinvoicesRedirect.jsp" - Top right reads "https:// (then adds the website I'm printing from.
The bottom of the sheet prints "1 of xx" and date and time. How do I remove these from my customers invoices?

I'm guessing the page is a PDF, and it is being displayed in the new Firefox 19 PDF Viewer? Unfortunately, there is currently no way to suppress headers and footers in the PDF Viewer without changing Page Setup globally. More information in this thread: [https://support.mozilla.org/en-US/questions/951147 Print from the PDF viewer without page information].
To switch to the Acrobat plugin, or an external application, see this article: [[How to disable the built-in PDF viewer and use another viewer]].

Printing the invoice date in the outgoing payment.

Hi Experts,
Please help me with this scenario.
I need to print the invoice date and the item description and also the due date of the invoice in an outgoing payment in PLD.
I think this can be done through wring a query in UDF through the formatted search.
Could anyone help me with an alternate solution or a step by step procedure for writing the query.
Your help is highly appreciated.
Thanks,
Hari Dharen

Hi,
Are you really wanting to have invoice date, item description and invoice due date or it is also including payment date and payment means ?
Here is the query:
SELECT distinct T1.[DocDate], T2.[Dscription],
T1.[DocDueDate] FROM VPM2 T0 INNER
JOIN OPCH T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN PCH1 T2 ON
T1.DocEntry = T2.DocEntry
Let me know if you need to know other field.
Rgds,

How to print batch numbers on the AR invoice print out

Hi Gurus;
Here is my question; I need to be able to print batch numbers on the print out of AR invoices, I used variable 492 in PLD and I am able to see the batch numbers directly linked with the AR invoice, meaning that I wont be able to see batch numbers that I entered on the Delivery even is the delivery doc was copy to the AR invoice.
Is there anyway that I can see the batch numbers on the AR invoice print if I entered the batch number on the delivery and then copied that delivery to an invoice??
My client wants to be able to send their customers and invoice with a batch number but he always follow the process from sales order to delivery and delivery to AR invoice and what this means is that he always entered the batch numbers on the delivery documents.
Please help me!!!
Thanks
Jenny

If the ad hoc printer mode is not available for the envy, there are some reasonably cheap ways to get a wifi network in your car. A cheap router from best but will generate the wifi network. Does not matter if you have Internet or not. A ifi device will also work, and most/ all of them run on batteries. Lastly, if you have a smart phone or I phone that generates a wifi hotspot, that may be enough to support the printing function. ( I need to test my I phone later today to see if that works.)

Print invoice from print server (printer is installed at the server)

Hello all
i have a LAN with 2 domain controllers (1 win2008 std and 1 win2008 R2 std).
My 2008 std is also a print server. ALl my printers are installed locally and through GPO i distribute them at all computers.
I want to know how can i set up my matrix EPSON 890 printer with the same logic.
I want to install it locally to the server, install a small printer server with the IP address 192.168.1.205 at the network and through GPO to distribute it to the computers which i want to print invoices.
i managed to install the server locally and i do the following settings at SAP but wihtou success:
1) t-code SPAD -> ACCESS METHOD -> S: PRINT USING SAP PROTOCOL
host printer :
192.168.1.205\invoice
Destination host: 192.168.1.205
but every time i give something to print i get an error.
Anybody know how i can resolve this?
now i have the EPSON 890 installed locally to a computer with USB and from there it is shared and all the users pritn there but that means i need to have the computer open all time
thx

Hello,
I'm sorry you have come across this, we have seen this before, it seems to be an issue with an installation of OS and/or other software that conflicts with the Xilinx compile server installation. This problem does not seem to be related to NI software, but that Xilinx compile server is conflicting with the software on some computers
What you want check is that compiler path and the root build directory are set to \NIFPGA86\Xilinx and \NIFPGA86\srvrTmp respectively.
Next we can try to compile your VI remotely, I've attached a link below on how to do this. If you can compile remotely, then we know that issue is not due to your code and is now down to the Xilinx compiler.
Using the LabVIEW FPGA Compile Server (FPGA Module)
http://zone.ni.com/reference/en-XX/help/371599C-01/lvfpgaconcepts/compiling_fpga_vis/
At this point, we can just remove and reinstall LabVIEW, LabVIEW FPGA module, the Xilinx compile server and reinstall NI RIO or try in on another computer.
Hope this helps,
Anna K.
National Instruments

"Error: The specified port is unknown" when installing PDFG network printer

When Launching the installation of PDFG network printer I'm getting the following error:
Anyone encountered with such a problem ?
Thanks, Yan

Same here.
Nobody with this kind of error?
Thanks,
G.O.

Hp Laserjet pro 100 m175mw heats up very fast and does not come close to the specified print speed.

I got myself the above all-in-one colour printer and have realised that the printer heats up very fast. After about 15-20 prints (sent in smaller files as advised by the manual), the printer heats up and each page took almost 2 mins to print. Frankly, I have never encountered such problem with any of my previous three laser printers. Anyone can point out what could be wrong or at least what can I do to reduce the problem from popping up.
Personally, I suspect this is a hw design problem....will be contacting HP too see what is their input.
Also the actual printer speed is not even close to the spec stated on paper.
regards
Colossus

Hi Colossus,
Follow the steps below.
1. Turn off the printer, and then remove the power cable from the back
2. Wait about 2 minutes, and then plug the power cable directly into the wall outlet
3. Turn on the printer
If you still have the same issues you will need to contact our techincal support for additional troubleshooting. The number for US/Canada is 800-474-6836, if you are outside the US/Canada region click on the link below to obtain number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

To print invoice amont on the specified position

Similar Messages

Maybe you are looking for