Tab canvas does not put the items in their specified positions

Hi all,
I have created a form with a tab canvas with three tab pages, each page has it's own text items.
I saved this form without any problems.
When i open this form again, i found that, some of the items in the first tab page are not put in their positions in this page, although the x position and y position is still correct in the property pallette.
i overcome this by moving these items with the mouse to any direction and returning it back, but the problem comes after saving and trying to open the form again.
Not : this occures only in the first tab page, i tried to swap the second tab page(page7) with the first tab page (page6), now the problem occures with page7(which became the first after swap) .
Please help

Yes, the items are in a frame.
Both automatically and locked for the frame upate layout property causes the problem.
I want to tell that the form in run time is ok, but in the forms builder the text items are not in their specified positions.
Then when changing any property for the items even if it was not related to the item position, the item is then displayed in the correct position.

Similar Messages

Runtime tab canvas does not look the same as designed in layout editor.

I created a tab canvas with the following physical properties:
Corner Style - Chamfered
Width Style - Variable
Active Style - Bold
The canvas looks nice in the layout editor, with the above properties. However, at runtime, the tab canvas seems to ignore the above properties and instead shows up with non-chamfered looking (whatever chamfered means) fixed-width rectangular tabs and the active tab page label is not in bold font. Is there a runtime setting that I'm missing here?
null

I am experiencing the exact same thing. The width of the tabs in the layout editor is varied depending on the length of the text. However, at run-time, the width of the tabs is fixed, causing the tabs to be wider than the window and a set of VCR buttons to appear in the upper right corner of the canvas. Personally, I think this is a Forms bug. Why would they intentionally let us set the width to variable at design-time only to force a fixed width at run-time?

I am trying to export a Numbers spreadsheet to a csv file, but it does not put the commas in

I am trying to export a Numbers spreadsheet to a csv file, but it does not put the commas in. I want to use it with an HTML table generator tool, but the tool is looking for commas. The Export to CSV exports it as a spreadsheet with all the formatting removed, and no commas.
Here is the html table tool:
http://www.textfixer.com/html/csv-convert-table.php

Numbers '09 create CSV files with comma separated values if and only if your system is using decimal period.
If the system is using decimal comma, the CSV files are created using semi-colon as separator.
Yvan KOENIG (VALLAURIS, France) dimanche 11 décembre 2011 11:11:25
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Discussion Forum does not display the items in Answered question ,Unanswered question views.

Hi All,
Discussion Forum does not display the items in Answered question ,Unanswered question views. Please find the below screen
what is the difference between Answered and unanswered view?
I have marked the discussion as question .
have replied for the question those discussion are visible in Unanswered view and the answered view is showings as no item to show.
Below screenshot is answered questions view.
Can you please help on this .
Thanks in advance ,
Sunitha

The discussion in which at least one of the replies is marked as "Best Reply" will show in the "Answered Questions" section.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

IMAQ ClipboardToImage IMAQ Vision does not support the file type you specified.

Hi.
I have been trying out the inventeering INVENTvisionIMAQexample.vi. But i always encoutered
an error in the INVENTvisionVFWcopy.vi of "IMAQ ClipboardToImage IMAQ Vision
does not support the file type you specified." And the video window does not
appear full size with real-time capture image. Does anyone encountered this problem as well? Please enlightened me. Thank you.

What error it is throwing ? if you could attach the vi then it will be easy to find out the problem

Problem in using Firefox - does not open the item after clicking or selecting the tab

FireFox version 31 installed on Windows 8.1
I have encountered the following problem :
I have login to email provider webmail which is https://webmail.oryon.net so that we can check our email.
There is menu tab(Email, Contacts, Calender) whereby we can just click/select the options which will bring us to another page is not working with Firefox. I have tried using other browser such as google chrome and internet explorer, it is working fine.
What is the problem?

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check the Web Console (Firefox/Tools > Web Developer) to see if there are specific error messages.
*https://developer.mozilla.org/Tools/Web_Console

Outlook 2007 instead search does not show the items which are actually present in the inbox and folders

Scenario:
when user search for any particular email item by using the sender name or subject name it does not show any result. At the same time it works fine when he specify the search folder(target folder) instead of searching it across all the folders/sub-folders.
1. We tried reconfiguring the outlook profile but this not fixed the issue.
2. It is specific to only few users but so far for all the others users it works fine.
3. Restarted the “Microsoft Exchange Indexer Service” but this is also not fixed the issue.
4. Hence the outlook reconfigure not worked, rebuild the search index not tried yet, but will give a try.

Hi,
Did the user select All Mail Items scope when searching in Outlook?
In addition, please make sure the user is not searching in a shared mailbox because in some configurations, you are limited to using the
Current Folder search scope when searching in a shared mailbox.
Please also let me know the result if you have tried rebuilding index.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Canvas does not recognize the font Arial Narrow

After setting the font property on the canvas context to "Arial Narrow", the context does not render text in the desired font. Other browsers (IE9, IE10, IE11, Chrome, Safari) all render Arial Narrow correctly. The css tricks people have mentioned on this site do not work with canvas. Here is a jsfiddle demonstrating the problem: http://jsfiddle.net/txymf/

Additional font properties like font-stretch:condensed may be required on Windows.
See also:
*http://people.mozilla.org/~jdaggett/tests/arialblackweights.html

How do I change the tab setting so that when I open a new tab it does not leave the current tab view?

Up until the other day, opening a link in a new tab via right click created the new tab but did not change my view to that new tab. However, since yesterday opening any new tab changes my view from the page I was browsing on to the new tab. Although it seems minor, this seriously negatively impacts the way I browse. Is there any way to change it back? I do not see it within the settings.

Tools > Options > Tabs - is the last preference there check-marked??

Custom aggregate "Apply to Open Report" does not add the item to the report

When I create a custom aggegate and click on "apply to open report", the custom aggregate does not get added to the report. The custom aggregate exists in the selector list and I can add it to the report using the selector. Why does the "apply to open report" not work and any ideas how to debug the problem?
the dversion is:
6.3.4.0.0 , Build: 71121
Thanks, Carla

Hi Carla,
Sorry to ask such a basic question, but are talking about Oracle Sales Analyzer?
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

PO rejection in SNC does not update the items in MM with ORDRSP

Hello everybody
I have got a problem with the integration of ORDRSP Idocs in MM (ECC6 - SAP_APPL 604) in the case of a PO rejection in SNC (7-SP7).
When rejecting a PO from SNC, the ORDRSP idoc is not integrated in MM
and is marked with an error message refering to a quantity difference
between the Idoc and the PO : "Acknowledgment for PO item 7621019091
00010 contains quantity variance"
Associated to the ORDRSP Idocs we are using the process code ORDR, and
I have checked that if we use the ORDR_SUS process, the integration
works well and the items are rejected in MM !
But I haven't found much informations about the differences between
ORDR and ORDR_SUS.
Is there a way to make the PO rejection works with the ORDR process or
could you tell me about the side effects of using ORDR_SUS in place of
ORDR ?
Vincent

Hello Bharath,
Yes we have the same problem on the Idoc status but didn't fix it.
Here is the SAP answer about the rejection process :
With regard to the SNC->ERP integration of the rejection, the process
code in ERP inbound processing has to be set to ORDR_SUS (-> transactionWE20). Otherwise the rejection will not set the deletion indicator in
ERP PO and as a result the approval process is not triggered when the
supplier rejects a PO item.
Kindly refer to the word attachment showing the WE20 screenshot.
The purchase order can transfer the rejection information to the
customer back-end system. The ReplenishmentOrderConfirmation XML messagecontains a corresponding AcceptanceStatusCode. However, to integrate therejection of a purchase order item with the customer back-end system
using IDocs, you must implement SAP Note 962849, so that the deletion
indicator is set on the purchase order item in SAP ERP.
Kindly implement the following note as well:
1458562 - ROC_Out not sent if the supplier rejects a PO item
With the implementation of the this note, the R/3 backend system should
get updated once the supplier 'Rejects' the item.
Kind regards,
Vincent

PO rejection in SNC does not update the items in MM with ORDR

Hi experts,
I have got a problem with the integration of ORDRSP Idocs in MM (ECC6 - SAP_APPL 604) in the case of a PO rejection in SNC (7-SP7).
The ORDRSP is not integrated in MM and is marked with an error message refering to a quantity difference between the Idoc and the PO.
Associated to the ORDRSP Idocs we are using the process code ORDR, and I have checked that if we use the ORDR_SUS process, the integration works well and the items are rejected in MM !
But I haven't found much informations about the differences between ORDR and ORDR_SUS.
Could anyone tells me about the side effects of using ORDR_SUS in place of ORDR ? Or if there is a way to make the PO rejection works with the ORDR process ?
Thx.
Vincent

Hello Bharath,
Yes we have the same problem on the Idoc status but didn't fix it.
Here is the SAP answer about the rejection process :
With regard to the SNC->ERP integration of the rejection, the process
code in ERP inbound processing has to be set to ORDR_SUS (-> transactionWE20). Otherwise the rejection will not set the deletion indicator in
ERP PO and as a result the approval process is not triggered when the
supplier rejects a PO item.
Kindly refer to the word attachment showing the WE20 screenshot.
The purchase order can transfer the rejection information to the
customer back-end system. The ReplenishmentOrderConfirmation XML messagecontains a corresponding AcceptanceStatusCode. However, to integrate therejection of a purchase order item with the customer back-end system
using IDocs, you must implement SAP Note 962849, so that the deletion
indicator is set on the purchase order item in SAP ERP.
Kindly implement the following note as well:
1458562 - ROC_Out not sent if the supplier rejects a PO item
With the implementation of the this note, the R/3 backend system should
get updated once the supplier 'Rejects' the item.
Kind regards,
Vincent

Deleting a contact list item through Powershell in sharepoint 2010 synced with outlook 2010, does not delete the item from outlook.

hi All,
I have a requirement for updating the contact list from CSV file and updating/ adding and deleting the changes in the SharePoint list using PowerShell script. List is also synced with outlook.
The problem arises, when we delete an item from the list using PS, the item (which was earlier synced with outlook) is not getting deleted from outlook.
Strange behavior : when we perform the same deletion operation manually from the SharePoint UI, every thing works fine as required.
Please refer the below PS
#Adding the records from SharePoint not in CSV file
if($flag -ne 1)
Get-Member -InputObject $csvRow -MemberType NoteProperty | ForEach-Object {
$property = $_.Name
$newItem.set_Item($property, $csvRow.$property)
$newItem.Update()
#Deleting the records from SharePoint not in CSV file
CreatePSLog "Deleting the records from SharePoint not in CSV file"
foreach($itm in $List.items)
$del = 0
$items | ForEach-Object {
if($itm["SAP Ansprechpartnernr"] -eq $_."SAP Ansprechpartnernr")
$del++;
if(!$del)
$List.GetItemById($itm.Id).Delete()
$List.Update();
$Web.Update();
many thanks in advance, Please suggest as I am completly stuck on this :(
Regards, Arun kumar

Hi Kumar,
Please remove the codeline $List.Update();, then run your code again, it works for me.
You may need to firstly delete the synced contacts list within Outlook to remove those undeleted accounts, then re-connect the SharePoint contacts list to outlook, then run your modified Powershell code.
Thanks
Daniel Yang
TechNet Community Support

Firefox does not put the file extension ".exe" onto the firefox application, and the browser will not open.

I downloaded firefox 3.6.6 from the website, followed the install directions and the browser does not open. I opened the task manager and firefox.exe was not in the process list. Locating the target using properties from the desktop icon if found that the application file did not have the ".exe" extension that it showed in the icon field for location. I have uninstalled and reinstalled several times with the same result. I am running windows XP Media Center Version 2002 service pack 3.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; InfoPath.1)

This would usually only happen if the originals were .doc, .dot, .docm, .dotx or .dotm files and someone changed their extensions. Does your Office installation open docx files created in Word 2013? If not, perhaps the Office installation is
faulty. In that case, try repairing the Office installation (via Programs & Features > Microsoft Office > Change in the Windows Control Panel).
Cheers
Paul Edstein
[MS MVP - Word]

Flash issue: Contribute does not put the id property in the object tag.

Notice the id property in the object tag.
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0"
width="550" height="400" id="source2">
Well Contribute is not inserting this tag. Therefore the
flash movie will not run the folowing (Flash Action Script):
import flash.external.ExternalInterface;
theURL = ExternalInterface.call("getLocation");
Anyone know what to do?

It appears that your issue is about web service development, and not about Visual Studio Installation/Setup (this forum's topic).
I suggest you ask about your web service deserialization issue in a topical forum here:
http://forums.asp.net/

Tab canvas does not put the items in their specified positions

Similar Messages

Maybe you are looking for