TO SER FIELS BOX IN REPORT LIST SCREEN

i WANT TO SET 2 RADIO BUTTON AND 2 FIELD BOX IN THE REPORT LIST SCREEN WHERE I WANT TO ENTER DATA MANUALLY IN THE FIELD BOX. AND I WANT TO SET ONE PUSH BUTTON .I WANT TO SET ALL THERE IN LIST SCREEN NOT IN SELECTION SCREEN.
CAN ANYBODY SUGGEST ME.
THANKS

hi check this..
REPORT Z_TEST7 .
*Table declaration
tables: vbak,vbap.
*internal table
data: begin of i_sales occurs 0,
vbeln like vbak-vbeln,
erdat like vbak-erdat,
audat like vbak-audat,
kunnr like vbak-kunnr,
vkorg like vbak-vkorg,
matnr like vbap-matnr,
netpr like vbap-netpr,
check type c, "checkbox
end of i_sales.
type-pools: slis.
data: v_fieldcat type slis_fieldcat_alv,
gt_fieldcat type slis_t_fieldcat_alv,
gt_layout type slis_layout_alv,
gt_sort type slis_sortinfo_alv,
fieldcat like line of gt_fieldcat.
*Selection screen
parameters: p_vkorg like vbak-vkorg.
select-options: s_vbeln for vbak-vbeln.
*start of selection.
start-of-selection.
perform get_data.
perform fill_fieldcatalog.
perform write_data.
FORM get_data .
select avbeln aerdat aaudat akunnr avkorg bmatnr b~netpr into
corresponding fields of table i_sales from vbak
as a inner join vbap as b on avbeln = bvbeln
where a~vkorg = p_vkorg and
a~vbeln in s_vbeln.
ENDFORM. " get_data
FORM write_data .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
T_OUTTAB = i_sales .
ENDFORM. " write_data
FORM fill_fieldcatalog .
sort i_sales by vbeln.
clear v_fieldcat.
"for check box
v_fieldcat-col_pos = 1.
v_fieldcat-fieldname = 'CHECK'.
v_fieldcat-seltext_m = 'chek'.
v_fieldcat-checkbox = 'X'.
v_fieldcat-input = 'X'.
v_fieldcat-edit = 'X'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 2.
v_fieldcat-fieldname = 'VBELN'.
v_fieldcat-seltext_m = 'Sales Document'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 3.
v_fieldcat-fieldname = 'ERDAT'.
v_fieldcat-seltext_m = 'Creation Date'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 4.
v_fieldcat-fieldname = 'AUDAT'.
v_fieldcat-seltext_m = 'Document Date'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 5.
v_fieldcat-fieldname = 'KUNNR'.
v_fieldcat-seltext_m = 'Customer'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 6.
v_fieldcat-fieldname = 'VKORG'.
v_fieldcat-seltext_m = 'Sales Organization'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 7.
v_fieldcat-fieldname = 'MATNR'.
v_fieldcat-seltext_m = 'Material'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
v_fieldcat-col_pos = 8.
v_fieldcat-fieldname = 'NETPR'.
v_fieldcat-seltext_m = 'Net Value'.
append v_fieldcat to gt_fieldcat.
clear v_fieldcat.
endform.

Similar Messages

How to add check box to list screen in SYCLO Agentry?

Hi,
How can I add a check box to the list screen. I want to add a new column which allows the user to select the check box.
I have tried with "Allow Multi-Row Select" option. When I selected this option I am getting an error
"The For Object defined for the "Transmit" action is invalid. 'None' is not a valid choice since the Multi-Row Selection option for the list screen is enabled."
-Shyam

Is the list screen in transaction screenset or Object?
You can't use the field type button in a list screen. But what you can do is take a 16 x 16 image, with a checked box not checked.
Users will not be able just to check the box to enable it or not. You need to have an action linked to a button to the selected row, or you can have an action fire if the user double checks the row.
Stephen

How to create the list box in the selection screen.

hai friends..
i want to create the list box for the selection screen input boxes.
thanks,
velu.

hi..
1. There are two important things :
a)PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
b) Fm VRM_SET_VALUES
2. just copy paste
3.
REPORT abc.
TYPE-POOLS : vrm.
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
vw-key = '1'.
vw-text = 'Jan'.
APPEND vw TO v.
vw-key = '2'.
vw-text = 'Feb'.
APPEND vw TO v.
vw-key = '3'.
vw-text = 'Mar'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'A'
values = v
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
regards,
veeresh

List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen. In the At Selection Screen Output, I filled the List box with 12 Values.
Now, I want to default the List box value with one of those values.
So, after the CALL FM 'VRM_SET_VALUES', I say p_field = 'Value'.
But this Value is being shown in the Drop down list twice.
I could not understand the mistake.
Please suggest.
Thanks,
Suryakiran D.

Hi suryakiran,
1. Its happening bcos
   u must be giving NAME
2. give p_field = Key
3. ie. 1 for Jan
        2 for Feb etc
in the FM VRM_SET_VALUES
we are filling the parameter VALUES
VALUES-key
VALUES-TEXT
so, give KEY, (and not text)
after calling this FM.
4.
REPORT abc.
TYPE-POOLS : vrm.
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
PARAMETERS : a(10) TYPE c AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
vw-key = '1'.
vw-text = 'Jan'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'A'
      values          = v
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
      a = '1'.
Problem
      a = 'Jan'.
regards,
amit m.
Message was edited by: Amit Mittal

Index of Values in the List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen for Month field. It has the values Jan, Feb, Mar....etc in it.
These entries, I added thru the VRM_SET_VALUES.
Now, I want to default the month to current month SY-DATUM+4(2).
Is there any FM to which I can send this SY-DATUM+4(2) as an Index and the corresponding value gets set for the Month field.
As an alternatvie, I could use Case Sy-DATUM+4(2). when '01'. p_month = 'Jan'. etc etc.. But I want to avoid this big case statement.
Please suggest.
Thanks,
Suryakiran D.

Hi Suryakiran,
Try to use the func MONTH_NAMES_GET.It will
return the month name along with the number.
And also you can directly select from table T247
Thanks&Regards,
Siri.
Message was edited by: Srilatha T

How can i use two list screens in Classical report.

Dear Sir,
In My Report in First screen i am taking the GR details and Display In it_final By Check Box Wise.
Based On The Check Box selection in First screen In Second Screen i want The Challan Details Based On Some In Puts In First Field.
so how can I call The second Screen In Classial report Plz Help Me.

check this report
REPORT ZNNR_ALVOOPS_SCREEN.
tables: mara,spfli.
types: begin of ty_tab,
 matnr type mara-matnr,
 ernam type mara-ernam,
 ersda type mara-ersda,
 end of ty_tab.
DATA ITAB1 TYPE TABLE OF SPFLI.
DATA WA1 LIKE LINE OF ITAB1.
DATA IO1 TYPE SPFLI-CARRID VALUE 'AA'.
data itab type table of ty_tab.
data wa like line of itab.
DATA OK_CODE TYPE SY-UCOMM.
DATA: GRID TYPE REF TO CL_GUI_ALV_GRID,
 CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GRID1 TYPE REF TO CL_GUI_ALV_GRID,
 CONTA TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
CREATE OBJECT CONT EXPORTING CONTAINER_NAME = 'CONT1' .
CREATE OBJECT GRID EXPORTING I_PARENT = CONT .
CREATE OBJECT CONTA EXPORTING CONTAINER_NAME = 'CONT2' .
CREATE OBJECT GRID1 EXPORTING I_PARENT = CONTA .
selection-screen begin of block b1 with frame title text-100.
select-options: s_matnr for mara-matnr.
selection-screen end of block b1.
select matnr ernam ersda from mara into corresponding fields of table itab up to 15 rows
where matnr in s_matnr .
call selection-screen 100.
*& Module USER_COMMAND_0100 INPUT
 text
MODULE USER_COMMAND_0100 INPUT.
if ok_code = 'PB1'.
leave to screen 0.
else.
leave to screen 100.
endif.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
 text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SELECT * FROM SPFLI INTO
CORRESPONDING FIELDS OF TABLE ITAB1 WHERE CARRID = IO1.
CALL METHOD grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
 I_BUFFER_ACTIVE =
 I_BYPASSING_BUFFER =
 I_CONSISTENCY_CHECK =
 I_STRUCTURE_NAME = 'MARA'
 IS_VARIANT =
 I_SAVE =
 I_DEFAULT = 'X'
 IS_LAYOUT =
 IS_PRINT =
 IT_SPECIAL_GROUPS =
 IT_TOOLBAR_EXCLUDING =
 IT_HYPERLINK =
 IT_ALV_GRAPHICS =
 IT_EXCEPT_QINFO =
 IR_SALV_ADAPTER =
CHANGING
 IT_OUTTAB = itab.
 IT_FIELDCATALOG =
 IT_SORT =
 IT_FILTER =
EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 others = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
 CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 I_STRUCTURE_NAME = 'SPFLI'
 CHANGING
 IT_OUTTAB = ITAB1.
ENDMODULE. " STATUS_0100 OUTPUT

How write a field to screen(report list) but don't display it ?

Hi, All
How write a value to screen(report list) but don't display it ? Because i will use this value as the user click the current line ,but i don't want to expose this value to the user.

Hi,
U can Use the option NO-DISPLAY with PARAMETERS.
Can write in the Selection screen statement with the syntax as
Paramaters: <fieldname> type <data type>
value <value> no-display.
-Rakesh

Multiple Selection List Box-- Data Reporting Problem...

I want to build a form which reports all of the multiple selections made by users from a list box. When I test the form, only the first selection is reported in the dataset. How do I configure the form so that when data is compiled, each of the selections from the list box is reported in sequence?

Here is the solution for the requirement.
Add another 2 columns in the resource list: test1 (set default value to 1), test2 (no default value).
Set test1 to 1 for all existing items in the resource list.
Set test2 to 2 for the 10 special items.
Custom form from InfoPath Designer, modify the data connection and also include the test1 and test2.
Go to drop down control properties and make sure its value is 1 and 2.
Go add the filter to multiple selection box control like this.
Note: field1 is the field used by my drop down control in Main data connection.
7. Done. Now when we select test1 in drop down, we can see all list items in multiple selection box. And when we select test2 in drop down, we can see the 10 list items that with test2 column filled with 2.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Creating a list box to the selection screen field

Hi folks,
         Could any one suggest me how to add a list box (drop down list) to a selection screen field.
          Thanks,
          Santosh.
Edited by: shyam prasad on Apr 3, 2009 6:07 AM

Hi,
just follow the code like below,
TYPE-POOLS: vrm.
TABLES sscrfields.
PARAMETERS: p_values AS LISTBOX VISIBLE LENGTH 10.
PARAMETERS: p_key TYPE char40 DEFAULT '5',
            p_text TYPE char80 DEFAULT 'Motorcycle'.
SELECTION-SCREEN PUSHBUTTON /10(10) but USER-COMMAND abc.
DATA: i_val TYPE vrm_values,
      wa_val TYPE vrm_value.
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_VALUES'
      values          = i_val
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'ABC'.
    IF p_key IS INITIAL AND p_text IS INITIAL.
      MESSAGE e001(00) WITH 'Enter both Key and Text to add value'.
    ELSE.
      CLEAR: wa_val.
      wa_val-key = p_key.
      wa_val-text = p_text.
      APPEND wa_val TO i_val.
    ENDIF.
ENDIF.
INITIALIZATION.
CLEAR: wa_val.
wa_val-key = 1.
wa_val-text = 'Bus'.
APPEND wa_val TO i_val.
CLEAR: wa_val.
wa_val-key = 2.
wa_val-text = 'Car'.
APPEND wa_val TO i_val.
CLEAR: wa_val.
wa_val-key = 3.
wa_val-text = 'Van'.
APPEND wa_val TO i_val.
CLEAR: wa_val.
wa_val-key = 4.
wa_val-text = 'Bicycle'.
APPEND wa_val TO i_val.
Hope it helps!!
Regards,
Pavan

How to Create a DropDown Box in a Selection Screen.

Hi,
I have a question. i.e, How to create a dropdown box in a Selection Screen. Could you please assist me.
Thanks & Regards
Sathish Kumar

hi satish,
The following can assist u to create a drop down ....
Drop down list box can be created in a dialog screen(SE51) as well as selection screen.
The sap list box allows to select a value from the list but we cannot enter our own value in the list box .The value list that will be displayed consists of two
fields TEXT field of TYPE 80(C) and internal KEY field of TYPE 40(C).
In screen painter to create a input/output field into list box we use
'L" as a value for dropdown attribute for the i/o field.
In screen painter to determine the type of method that will be used to fill the value
list we use the attribute value list.
If it is blank the value list will be filled by the first column of the input help assigned to the screen field.This input help can be defined in the ABAP Dictionary, on screen using SELECT,VALUES screen statements or in event POV (PROCESS ON VALUE-REQUEST ) and the input help that will be passed to the field should consists of 2 columns ,the key column is filled automatically by the system.SAP recommends value list field should be blank.
or
The value can be 'A' meaning that the value list will be filled in the event PBO(PROCESS BEFORE OUTPUT) or before the screen is displayed.In this method we use function module VRM_SET_VALUES to fill the values and pass it to the i/o field.
If a function code is attached to the list box the selection of a value triggers a PAI
otherwise PAI will not trigger.
Example
Dropdown list boxes
REPORT DEMO_DYNPRO_DROPDOWN_LISTBOX.
TYPE-POOLS VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST.
DATA: WA_SPFLI TYPE SPFLI,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK LIKE SY-UCOMM.
TABLES DEMOF4HELP.
NAME = 'DEMOF4HELP-CONNID'.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE INIT_LISTBOX OUTPUT.
CLEAR DEMOF4HELP-CONNID.
SELECT CONNID CITYFROM CITYTO DEPTIME
    FROM SPFLI
    INTO CORRESPONDING FIELDS OF WA_SPFLI
   WHERE CARRID = DEMOF4HELP-CARRIER2.
    VALUE-KEY = WA_SPFLI-CONNID.
    WRITE WA_SPFLI-DEPTIME TO VALUE-TEXT
                           USING EDIT MASK '__:__:__'.
    CONCATENATE VALUE-TEXT
                WA_SPFLI-CITYFROM
                WA_SPFLI-CITYTO
                INTO VALUE-TEXT SEPARATED BY SPACE.
    APPEND VALUE TO LIST.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            ID              = NAME
            VALUES          = LIST.
ENDMODULE.
MODULE USER_COMMAND_100.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'CARRIER'
     AND NOT DEMOF4HELP-CARRIER2 IS INITIAL.
    LEAVE TO SCREEN 200.
ELSE.
    SET SCREEN 100.
ENDIF.
ENDMODULE.
MODULE USER_COMMAND_200.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'SELECTED'.
    MESSAGE I888(BCTRAIN) WITH TEXT-001 DEMOF4HELP-CARRIER2
                                        DEMOF4HELP-CONNID.
ENDIF.
ENDMODULE.
Reward if useful.
Thank you,
Regards.

I have been sent a 'word document' in which are a series of boxes about thirty lines long to insure written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout

I have been sent a 'word document' in which are a series of boxes about thirty lines long to insert written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout

You can't change the way Pages import .doc files.
It was never written that it reproduce exactly the original one.
From my point of view, as I refuse to give a cent to M...soft, the best way to deal with documents issued by their Office suite is to use the free libreOffice.
Yvan KOENIG (VALLAURIS, France) jeudi 7 juillet 2011 11:34:19 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Which table keeps the Discoverer Report list?

Hi,
I'm new to Discoverer, actually I haven't started to use yet.
I would like to know is it possible to retrieve a list of reports created in Discoverer so that I can add them to the standard reports that I developed using Oracle Report builder in my application. If possible, which table can I get the report list?
My second question, is it possible to run a Discoverer report directly if I have the report link? Or everytime I run I must enter the schema username and password?
Please advise.
Thank you.

Hi
With regards to question 1, I don't believe this is possible any more. The older versions were rather flexible in that approach but sadly, no more.
With regards to question 2, using a VPD you can authenticate to your heart's content using any custom defined table you wish. This is just an out of the box idea, and I don't know whether it will work, but here goes.
The table that stores public connections is this one: orasso.wwsso_psex_user_info$
I am wondering what would happen if we put a restriction on SELECT from that table to not allow selection if the SSO user was not of a certain class or did not have a certain privilege.
Would anyone else care to comment here?
By the way, inside SQL, this code SYS_CONTEXT('USERENV', 'CLIENT_IDENTIFIER') will return the SSO user.
For more info on public connections, look here: http://download-west.oracle.com/docs/html/B13918_03/conns.htm#i1016752
Best wishes
Michael

How to use a radio button in enabling/disabling a text box in report progra

Hi,
    Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
             R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
             A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.

Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried r

Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?

Hi Bev076,
I would try these ideas first:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that doesn't resolve the situation, I would suggest reporting it:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Take care,
- Ari

Designed Reports are not showing in the Analysis Report List

Hello Master's,
I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
Kindly update the solutions with steps.
For you reference please find the below screen shot.
Thanks in Advance......!
Kind Regards
Shankarappa H L

Hi Shankarappa,
The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
1. Create a View
2. Assign Report
For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
Thanks,
Sebastine

TO SER FIELS BOX IN REPORT LIST SCREEN

Similar Messages

Maybe you are looking for