To set an error while saving the order when the item categor changed in CRM

Hello SAP Gurus,
As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering  this type of issue since long back
To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
Can someone help me to achieve this.
Thanks in advance.
Cheers
Sreedhar

Sreedhar,
Can't you control it by Item Category determination?
JD

Similar Messages

  • Error while saving Production Order

    Hi all
    I am getting the following error while saving the Production Order -
    "Class for order classification has not been generated".
    I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
    Any help would be highly appreciated.
    Thanks in advance.
    Hrishi

    Solved.

  • Error while saving Prod order - "Class for order classification"

    Hi all
    I am getting the following error while saving the Production Order -
    "Class for order classification has not been generated".
    I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
    Any help would be highly appreciated.
    Thanks in advance.
    Hrishi

    Solved

  • Error while saving purchase order

    Hi all,
    While saving purchase order i am getting the following error.
    Syntax error in program SAPLV61A
    in include RV64A932
    in line 10
    Statement"*&"is not defined.check your spelling.
    Thanks& Regards,
    Hari.

    Hi Hari,
    I've just encountered the same problem as you have now in your latest post.
    Normally the include that you mentioned is a formula condition value include which you can modify but you probably have
    to register this object first on the SAP OSS pages to get an Access key to modify it.
    After you've obtained a key launch transaction VOFM and comment out the line "TABLES: VBRK, VBAK".
    As you see below SAP did exactly the same thing in several other includes.
    Include FV64A582
    -> is a formula condition value
        tx VOFM
                -> Formulas
         -> Condition Value
         -> Routine number 582
    At line 37 I commented out "TABLES: VBRK, VBAK." which is not used
    anyway in this include.
    On top of that SAP commented out these definitions in several other
    includes: eg. FOICH002, FOICH002, OI_LV61ATOI.
    If other persons have comments on this topic please respond/advise.
    Hari, inform us if this resolved your problem.
    Also reward points if my post aided you in resolving your issue.
    Thank you for feedback.
    Best regards,
    Tom Cockaert.

  • Error while saving service order?

    Dear SAPIENTS,
    While saving service order system is throwing error in commitment check
    message number  CO634
    can anybody tell where i need to check to resolve this problem?
    Regards,
    Kaushal Rai

    hi
    In FMAVCR01 you can see the amount avaialble for the fund center and commitment item combination ,
    in the maintenance order itself from the menu Goto>Assignments>fund center
    i think you are using the funds management where the system picks up the commitement item for the respective material in the order you specified ,kindly consult with your FICO person also
    regards
    thyagarajan

  • Error while saving sales order

    Hi I am encountering below error message while saving sales order:
    Warehouse
    Specify export data in material master
    Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.

    Hi,
    Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
    If the Order type is activated then the following error message can pop up unless you maintain in material master.
    See whether export legal control data is activated or not for the order type.
    In IMG Sales and Distribution>Foreign trade>Legal control section
    Regards,
    Saju.S

  • Mobile Sales - Error while Saving Sales Order

    Hi,
    When I try to create and save a sales order in the Mobile Sales, the error message UI_CONT_STATUSBAR_ICON_TT is displayed, blocking the saving process and the new order is not saved.
    I tried to debug the SAP Mobile Application Studio(Visual Basic) side and I didn`t find any error there.
    Does anyone knows what could be happening?
    Thanks for any help.
    Regards,
    Andrew

    I reinstaled the Mobile studio and then it worked.

  • Run time error while saving sales order

    Hi all,
    i am working on IDES ECC 6.0, when i am saving an sales order(OR) i am getting run time error in the table CRMPAROLTP, program SAPMV45A.
    i am using 4 GB RAM, still having a space of 30 GB for only IDES to save the data.
    so, how to solve it.

    Hello,
    I doubt the runtime error (I am assuming you mean that you got a short dump) you mentioned in your original post has anything to do with the warning messages you see when doing a check (Ctrl+F2) on table CRMPAROLTP and program SAPMV45A.  These warnings should not cause a short dump or runtime error.
    The warning message for the table has the following long text:
    Table CRMPAROLTP: Key length > 120 (Restricted functionality)
    Message no. DT214
    Diagnosis
    The key length, i.e. the sum of the field lengths of all the key fields of the table, is more than 120 bytes.
    System response
    This is a warning.
    Procedure
    Note the following restricted fuctionality for this table:
    - Table contents cannot be transported by specifying key values, at
      best by specifying generic key values with a maximum length of 120
      bytes.
    - The table may not be used as the base table of a lock object.
    The warnings in SE38 for program SAPMV45A are mostly related to Unicode and have no reference to the table CRMPAROLTP.
    If you haven't already done so, please check the SAP Note referenced in my first reply since this does provide a solution for short dumps related to table CRMPAROLTP.
    Of course, since I don't know specifically what the short dump message is that you received, I could be basing my assessment on false assumptions.  If you have those details it is better for the SDN community as a whole if you include the information in this thread instead of sending it to me offline.
    Best Regards,
    Jamie

  • Error while saving interactive pdf form:The document could not be saved.

    Hello,
    Can anyone please help me here.
    Not able to save the pdf form.
    I have interactive form which contains static fields,text fields,Document digital signature and a submit button.
    After filling and signing the form it will ask for saving the form.But saving is giving error.
    Error : The document could not be saved.There was a error reading the document(26).
    Can anyone please tell me why i am getting this error.
    Thanks in advance,
    Menaka.H.B

    Hello,
    Integrated into WD application means -> Interactive form generated in SFP transaction is used in abap webdynpro application.
    Offline scenarion -> Since it is an interactive form, user will fill the form offline and submit it by email.From the webdyn pro appliaction user will download the form to the local desktop.Fills it offline and submits the form.
    Now the interactive form generated directly from sfp tcode is working fine.I can fill the form,Sign it, save it and submit the form.
    But the form downloaded from the WD application cannot be saved and is not allowing to dogitally sogn the form.
    Its giving error The document could not be saved. there was a problem reading the document(26).
    Thanks and Regards,
    Menaka.H.B

  • Is there any way to add AppleCare to an iPhone after the order when the phone has not been shipped yet

    Simple question. I purchased an iPhone 5, and added AppleCare to the cart. After processing the order, I found that AppleCare had been dropped from the cart. The phone obviously hasnt shipped yet. I have tried calling, but am unable to reach anyone. Is there anyway to purchase AppleCare after main purchase without going to an apple store. The closest one for me is 2+ hours away.

    My iPhone 5 Ordering Situation:
    Successfully submitted pre-order at 2:05am CST
    Realized I did not add AppleCare+
    Tried to add it as a separate product
    Unable to add AppleCare+ after submiting pre-order
    This Morning:
    I just got off the phone with an Apple representative.  He assured me that, once my iPhone 5 arrives on September 21, I will be able to: 1) call Apple and have AppleCare+ added to my iPhone 5;  2) go into an Apple Retail Store and have AppleCare+ added to my iPhone 5.  He said I would have thirty days from my device's ship date (September 21) to add AppleCare+ to it.  He also recommended that, if I wanted to have AppleCare+ added at an Apple Retail Store, I should make an appointment as soon as possible.  Because I was still concerned something might go wrong, the Apple representative emailed me a copy of my case number to use as a reference in case I have any issues obtaining AppleCare+ on September 21.
    Caveats & More Information:
    I ordered through the Apple Store app on my iPhone 4
    I live in the United States
    My carrier is AT&T
    I have a case number and repeated assurances from an Apple representative
    While your situation may differ from mine I do hope you're able to add AppleCare+ to your iPhone 5 once it arrives, either by calling 1-800-MY-APPLE or by making an appointment at your nearest Apple Retail Store.
    Best Wishes,
    Dylan

  • Error while saving invoices or clicking the invoices tab in R12

    Hi All - We are getting an error in the Payables Invoice Entry screen in R12. We have 4 custom triggers enabled recently and from then we are getting the error ORA-04088: error during execution of trigger.
    APPS.CUSTOM_AP_INV_AFT_TRG in AP_AI_TABLE_HANDLER_PKG.INSERT_ROW <- AP_INVOICES_PKG.INSERT_ROW<- APXINWKB
    with parameters (p_rowid =, p_invoice_id = 31929)
    while performing the following operation:
    Insert into ap_invoices_all
    Any kind of help is really appreciated.
    Thanks,
    Ajay

    Hello Ajaz,
    BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
    Regards
    km

  • Stop Message while saving Service Order from IW51

    Hello,
    I am getting bleow error while saving service order.
    System: Status object does not exist. Message Numner IW351
    Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
    USEREXIT_SAVE_DOCUMENT_PREPARE
    From this depending upon the some validation i am populating Error message,
    I am creating sales order through service order from the Transaction IW51.
    When i Try to save the service order i get the error messages which is coming from my validation which
    I had put in the MV45AFZZ.
    After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
    As soon as i click on that i get a STOP messgae.
    Which i as below.
    System: Status object does not exist
    I m not getting why it is coming.
    Kindly Help.
    Regards
    Sachin

    Hi,
    After MESSAGE add STOP. :
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    STOP.
    or If ambiguity with usage of  STOP being obselete use EXIT after message.
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    EXIT.
    BR
    Dep

  • Error while saving new Version

    Hi,
    I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
    The version gets created successfully but it does not allow me to save the same and gives the following error.
    Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
    Please help.

    Hi,
    I am creating a new version in DRM by using Copy to New feature but I am getting an error while saving that version.
    The version gets created successfully but it does not allow me to save the same and gives the following error.
    Serve was unable to process request--->ORA-02291:Integreity constarint (MDM_SYS_C0047065)-violated - parent key not found
    Please help.

  • Error while saving config in MSY

    Hi,
    I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
    -> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
      1. 'MTBLLFW-The attribute destination of the business object
          relation type is not valid'.
      2. 'MTBLLFW-the attribute source of the business object relation
          types is not valid'
    But it is allowing me to add an entry. When i save my customer entry i am getting the error :
      3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
    I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
    If anyone has any idea please let me know.
    Thanks in advance,
    Karuna.

    Hi,
    did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
    Also you should check & compare the download monitor for CDB load in the CRM system(s).
    I assume sth is missing there (see also your other post).
    Regards,
    Wolfhard

  • Error while create sales order

    Hi,
    Please help.
    I am facing error while create sales order.
    No item category available (Table T184 OR VERP  )
    Message no. V1320
    Diagnosis
    No item category could be determined for the combination OR VERP .
    System Response
    The system does not allow further processing of this item.
    Procedure
    Check the entries in table T184 by means of which item category determination is controlled.
    If you do not have the authorization to do this yourself, contact your system administrator.

    Hi,
    Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
    Path
    SPRO-SD-sales-sales douments-sales document item-assign item categories.

Maybe you are looking for