To stop Auto population of a field

Hi:
For UK,in IT0077,there are fields for veteran status.The non-veteran field is getting auto populated.I want to stop its auto population.How to do that?
Regards,
Kamini

Hi Kamini,
Module pool - MP007740
Form set_vet_status.
Makes that field checked - "Non-Veteran".
This form is called in module pool MP007720 - Module P0077A - PERFORM set_ver_status.
In summary, it is a standard code and should not be changed.
Regards,
Dilek

Similar Messages

Auto Population of a field

Hi,
I need a text field to be auto populated as the sum of 2 fields when the user enters them.How can this be done?
Regards,
Vignesh

Hi Vignesh,
Given your two items to sum are P1_FIELD_1 and P1_FIELD_2, and the item to hold the sum is P1_SUM.
Place the following in the HTML Header of the page (if your running ApEx 4, it goes in the Function and Global Variable Declaration and don't include the script and HTML comment tags):
<script type="text/javascript">

</script>Place the following in the HTML Form Element Attributes for both P1_FIELD_1 and P1_FIELD_2:
onchange="$s('P1_SUM', getSum($v('P1_FIELD_1'), $v('P1_FIELD_2')));"$s is an ApEx built-in JS function for setting the value of an item. $v is an ApEx built-in JS function for getting the value of an item.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

Auto populating the Notes field in XK02/FK02

Hi Experts,
I have a requirement where I need to auto-populate the Notes field with some text.
When the user clicks the arrow next to Email field a pop up comes up. In this pop up there is a Notes field. (Please see the Screen shot)
I want this Notes field to be auto-populated with "Notes".
How can I accomplish this?
Please advice.
Thanks.

Hi -
1. In SE51, go to progrram - SAPLSZA6 and screen 600, you will find in the PBO
MODULE precalculate.                                      "*981i
MODULE d0600_status.
MODULE d0600_output.
LOOP AT g_d0600_adsmtp WITH CONTROL t_control6 CURSOR
    t_control6-current_line.
    MODULE d0600_display_line.
ENDLOOP.
MODULE d0600_cursor.
2. In the 1st three module below check if any user exit / BADI is there .
(a) MODULE precalculate.
(b) MODULE d0600_status.
(c) MODULE d0600_output
If yes check for modifying the value of the field 'REMARK' in the interanl table g_d0600_adsmtp.
Example g_d0600_adsmtp(1)-Remark = 'Notes'
3. If no BADI / exit is available, then go for implicit enhancement in the perform inside MODULE d0600_output. i.e    FORM dynpro_output .
At the end of form    FORM dynpro_output - modify the internal table   ct_comm_table.
Please note - This form may be used by other programs, so you can put some conditions like restricting to trasaction code etc.

How to stop auto-populating of O-R-Xmltype table from repo files? on 11g

Hi,
I registered an XML Schema following this example,
begin      dbms_xmlschema.registeruri(‘http://xmlbook.com/sample/contact_annotated.xsd’,           ‘/public/chp12/contact_annotated.xsd’,           local=>true,           gentypes=>true,           genbean=>false,           gentables=>true); end; /
Wang, Jinyu (2011-07-01). Oracle Database 11g Building Oracle XML DB Applications (Oracle Press) (Kindle Locations 8301-8310). McGraw-Hill. Kindle Edition.
The schema has, xdb:defaultTable=“contact_or_tbl” so a table by that name is generated.
Then it says,
For an XML document with the xsi:schemaLocation or xsi:noNamespaceSchemaLocation attribute, you don’t need to use the createschemabasedxml() function. The XML insertion to the O-R table is done automatically when the document is loaded to XML DB Repository.
Which is what I observe as well. However I also produce XML from the database and store it as a created resource in the XML DB repository. I don't want that to again show up in the contact_or_tbl table. Is there a way to tell Oracle to NOT load the resource automatically even if it mentions the schema. OR it there a way to have an additional column in contact_or_tbl which mentions the file file name so that I can distinguish?
Thanks,
-v-
Edited by: user5837642 on Aug 30, 2012 11:52 AM

The entry in the OR table seems to drop the information about the file name.You can retrieve the resource name of a stored XMLType instance with the following :
SQL> declare
2    res boolean;
3 begin
4    res := dbms_xdb.CreateResource('/public/workbook2.xml',
5    xmltype(
6 '<workbook xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
7            xsi:noNamespaceSchemaLocation="workbook.xsd">
8    <worksheet sheetName="MySheet1" sheetId="1"/>
9 </workbook>')
10    );
11 end;
12 /
PL/SQL procedure successfully completed
The registered schema "workbook.xsd" has the annotation xdb:defaultTable = "WORKBOOK_XML", so the resource content gets stored in the table :
SQL> select xmlserialize(document object_value) from workbook_xml;
XMLSERIALIZE(DOCUMENTOBJECT_VA
<workbook>
<worksheet sheetName="MySheet1" sheetId="1"/>
</workbook>
The link between the XDB resource and the row in the XMLType object table is maintained by the XMLRef hidden column in the resource :
SQL> SELECT t.object_value
2       , v.any_path
3       , x1.file_name
4       , x1.date_modified
5 FROM workbook_xml t
6       JOIN resource_view v
7       ON REF(t) = XMLCast(
8                     XMLQuery(
9                       'declare default element namespace "http://xmlns.oracle.com/xdb/XDBResource.xsd"; (: :)
10                        data(/Resource/XMLRef)'
11                        passing v.res returning content
12                     )
13                     as REF XMLType
14                   )
15       CROSS JOIN
16       XMLTable(
17         XMLNamespaces(default 'http://xmlns.oracle.com/xdb/XDBResource.xsd')
18       , '/Resource'
19         passing v.res
20         columns file_name      varchar2(260) path 'DisplayName'
21               , date_modified timestamp     path 'ModificationDate'
22       ) x1
23 ;
OBJECT_VALUE      ANY_PATH                  FILE_NAME         DATE_MODIFIED
<Object>          /public/workbook2.xml     workbook2.xml     01/09/12 09:17:46,146000
In your case, you can quickly distinguish the different resource locations using the UNDER_PATH operator.
For example, to select only the rows generated after creating resources in the /public folder :
SQL> SELECT xmlserialize(document t.object_value)
2 FROM resource_view v
3       JOIN workbook_xml t
4       ON REF(t) = XMLCast(
5                     XMLQuery(
6                       'declare default element namespace "http://xmlns.oracle.com/xdb/XDBResource.xsd"; (: :)
7                        data(/Resource/XMLRef)'
8                        passing v.res returning content
9                     )
10                     as REF XMLType
11                   )
12 WHERE under_path(v.res, '/public') = 1
13 ;
XMLSERIALIZE(DOCUMENTT.OBJECT_
<workbook>
<worksheet sheetName="MySheet1" sheetId="1"/>
</workbook>
Edited by: odie_63 on 1 sept. 2012 11:30

Auto-populated ID field?

Can I create an auto-populated ID field? Trying to create a unique record ID for an incident report form.
Thanks

Depends how many responses you anticipate, I therefore realise not ideal, a workaround I have used is;
Import responses into Excel.
The Date / Time field, whilst displayed as Date and Time, is in fact encoded.
By re formatting that column in Excel to, for instance, 'Number' (with no decimal places), you get a code for the day.
If you format, with decimal places, you get the time code as well. The more decimal places you allow, the more unique (is that English?), the code.
Just a thought

How to auto populating the field in MS crm

How to auto populating the field in MS crm

Hi,
To populate URL of account based on account name please refer this link.
If you are asking about the address auto populate/complete refer this link
To Retrieve from other entity and populate the fields, for example on entering the account name in opportunity form the fields from account form like Sector, Region can be retrieved and can be auto populated in opportunity form using Odata as follows.
Call the function getAccountDetails in onchange event of Companyname. Do not forget to add Jquery and Json in libraries.
function getAccountDetails() {
var companyName = Xrm.Page.getAttribute("customerid").getValue();
if ((companyName != null)) {
var companyNameValue = companyName[0].name;
var companyNameID = companyName[0].id;
var serverUrl = Xrm.Page.context.getServerUrl();
//The XRM OData end-point
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataSetName = "AccountSet";
var odataSelect = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "(guid'" + companyNameID + "')";
//alert(odataSelect);
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataSelect,
beforeSend: function (XMLHttpRequest) { XMLHttpRequest.setRequestHeader("Accept", "application/json"); },
success: function (data, textStatus, XmlHttpRequest) {
var result_account = data.d;
var name;
var Id;
var entityType;
//replace the fields with the fields on your entity
Xrm.Page.getAttribute("new_sector").setValue(result_account.new_Sector.Value);
Xrm.Page.getAttribute("new_region").setValue(result_account.new_Region.Value);
error: function (XmlHttpRequest, textStatus, errorThrown) { alert('OData Select Failed: ' + odataSelect); }
Also as another option if you donot wat the java script then you can go for a workflow to poplate, please refer this link: https://www.powerobjects.com/blog/2013/11/25/retrieving-data-from-a-related-entity-crm-2013/
Regards, Rekha.J

Auto Populating Text Fields Default Values

I am using Acrobat X Pro. I have a multiple page form and would like the "Legal Address" field entry/value after typed to auto-populate, or be the default value, of my "Mailing Address" field further down the form. I can accomplish this if the fields are the same name, ***HOWEVER*** I just want it to pre-populate it and if the "Mailing Address" differs from "Legal Address" be able to type over that (Mailing Address) on the form entry without also changing the Legal Address. If the fields are named the same, both will always be the same / updated together.
Any help - or examples!

Hi Michael,
Thanks that was helpful and worked although I now appear to have another problem.
When I enter data into current title (eg Manager, Finance) data in proposed title field (eg Manager Finance) is auto populated as expected - correct
When I change the data that was auto populated in the proposed title field (eg Manager, FInance) to the new title (eg Director, Finance) is keeps the new tltle - correct
When I select something from another field eg cost code, the data I manually keyed into the proposed title reverts back to what was entered into the current title (eg Manager FInance)
Is there a way of committing the data that is entered automatically or manually so it remains in the field?
Regards,
Michael

Auto-populating fields based on another field (must access dif record type)

This is a long one. I basically want to know if it's possible to have several fields auto-populated based on the data in another. It gets a little tricky here, because the information I want to auto-populate will have to be searched for in another record type. An example will hopefully make my request clear:
I have 10's of thousands of records of the "Product" record type that each have a product number. Well, let's say I have several fields to enter into an "Opportunity" record type, based on the information for this product number in the "Products" record type. I want to know if I can enter the product number on the "Opportunity" record, and have OnDemand go look up this product number in the "Product" record type, pull information from that record, and auto-populate that additional information in certain fields back on the "Opportunity" record that I am entering information for.
I know a workflow can do this on simple things where you have a few different part numbers and can create a workflow for each, but I literally have 40k part numbers, and I can't very well create that many workflows. If there was a way to dynamically script the workflow to use the part number in the field on the "Opportunity" record and go fetch the data to auto-populate, that would be nice.
I also can't use a cascading picklist because, again, there are around 40k products records and picklists have a limit to how many choices you can have.
My think tank has run empty, and I am out of ideas. I was wondering if there is any other way to get this done, or if it's even possible?
Thanks,
B
Edited by: user10885599 on Feb 5, 2009 11:54 AM

As I read this, I am wondering if you would be able to use the new JoinFieldValue() function to update the fields. The problem is that the Opportunity record does not have a direct link to products. The Revenue table does however, so you should be able to do this from Revenue, if that is how you are using the application.
The process would be to create a workflow that watches for new Revenue records, and updates the new fields in the Revenue object using the JoinFieldValue function to pull the data.

Stop thunderbird from automatically populating the To: field when replying

Is there a way to stop Thunderbird from automatically populating the To: field when replying to an email?.
Also is there a way to get Thunderbird to request confirmation of addresses emails are to be sent to?

'Reply' is supposed to do exactly that. Use 'Forward' instead.
Wrt return receipts check this article.
http://kb.mozillazine.org/Figuring_out_whether_the_recipient_read_your_message

Auto populating the Date/Time Field in a Column

I'm having an issue with the a Date and Time Column type auto populating the current date and time correctly. I've put the =Now() function in the calculated value box. I get the correct date and I get a time but the time is wrong, its
on Pacific Time and my regional settings on the site are Central Time. I can't find any way to specify use central time. is this a bug on microsoft's end or mine? It was working yesterday and not today.

check what time zone is your central admin is set to
using
http://<CentralAdminUrl>/_layouts/regionalsetng.aspxand if its pointing to pst you will get pst result .you will see the options wil time zone selected and also some other like calender etc
if you want to change reginaol time for your site so to site settings ==> under site adminstration
you will see regional settings where you can set the time zone it will look like this :

Auto-populating folders stop becoming auto-populated for no apparent reason

Just what it says. I make an autopopulating folder, use it a few times, come back later and it's no longer auto-populating and I have t to re-link it. I keep my projects on a network drive if that means anything.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell
Solved!
Go to Solution.

I used to use autopopulating folders when I first started using projects. Then I discovered that it is so much easier to manipulate things inside Project Explorer when using virtual folders. If I want to move a file, it's just drag n drop. If I want to rename a virtual folder, no problemo. If I want to shuffle virtual folder hierarchies around, not an issue. I can do these things with autopop folders also, but it is so cumbersome that I end up spending too much time focusing on how to move things around and it distracts me from doing the actual coding. The interface should not get in the way of your coding, and with autopop, it surely does (for me).
The tradeoff is that it is difficult to look at in Widnows Explorer. But really it's like viewing the file structure of your hard drive directly, since folders don't really exist on your hard drive anyways.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Self Registration -- Auto populating Organisation field value

Hi All,
How do we auto populate the Organisation field value? Do we need to write adapter or by updating FormMetaData it can be done?
Thanks

Ah, OK, that makes more sense. So it's not a digit, but a character.
In that case you can use a series of if-else commands, or a switch command.
The former would look something like this:
var v = this.getField("Vin-10").valueAsString;
if (v=="P") event.value = "1993";
else if (v=="R") event.value = "1994";
else if (v=="S") event.value = "1995"; //etc.
else event.value = "";
Adjust the name of the field in the first row, and place the code as the custom calculation script of the Year field.

Auto-populating text fields based on dropdown option

This has probably been covered on this forum before. I would like to auto-populate multiple text fields with pre-programmed data based on a user-selected option from a drop-down list. The file here should explain clearly what I want to do:
https://acrobat.com/#d=ID7ezZN5ZzIKgVvmgkyMiw
Where can I find an example code that would accomplish this task? Thanks.
-Paul

Your form data hierarchy is different than mine. You need the brackets also, otherwisethe first assignment statements executes only.
// form1.#subform[0].DropDownList1::exit - (JavaScript, client)
if (!(this.isNull)) {
var char = this.rawValue;
TextField41.rawValue = "Data " + char + "1";
TextField42.rawValue = "Data " + char + "2";
TextField43.rawValue = "Data " + char + "3";
Steve

How to auto-populate the Contact field from a Custom Object

Hi,
I am working on a project where the Contact record is the main focus. I have setup the Contact record as having a one-to-many relationship with CO4. From the Contact Details page I can click on the New button in the Related Record section for CO4 and the Contact from the Details page is auto-populated (which is what I want). I then enter the data into CO4 and click on Save so that the record is displayed in the Related Record section, and then I click into it so that I'm now on the CO4 Details page.
My page layout for CO4 has both Activities and Service Requests as related records, and the page layouts for both of these include the CO4 field and the Contact field. When I click on New for either of these record types, the CO4 field is populated from the previous record but the Contact is not. I realize this is because there is a one-to-many relationship between CO4 and the Activity/SR, but is there any way to also pull over the value in the Contact field?
I also tried this using CO1 which does have a many-to-many relationship (if I understand it correctly), but the Contact field is still not pulling over. Is there a way to make this happen?
Thanks!

This functionality is not available at this time. I would recommend that you submit a enhancement request to customer care.

Can't find files when building EXE unless the WHOLE codebase is in an auto-populating folder

I have a project with FPGA (specifically a couple cRIO targets).
I have a build spec for a PC target, then a target that's set up for Scan Mode, then a couple targets set up for FPGA mode.
When I try and build the FPGA or Scan Mode targets, I NEED to have the entire code folder (and sub-folders) in an auto-populating folder.
What's strange is that I manually added the same folder, and then pulled the Top-level VI out so that it was easier to see within the project. When I did that, I got errors that files were broken and missing. I then removed that folder and added the same folder as auto-populating and all is well.
Yes, I was able to make the build work by including debugging, not removing TypeDefs, etc. This also cause the build to go from 2MB and 30 secodns build time to 50MB + 10 min build time.
Why si this? I would like to remove the files for other targets from the Source of each of the targets. If I do this, I can't build (these are other top-level VIs that are not appropriate on a per target basis).
Any ideas?

Hey Jed,
It sounds like the problem you are having is coming from a file path issue. When you manually add folders as "Snapshot" the file paths are set and will generate errors if the files are moved. The autopopulating folder updates file path locations so you don't have those same issues. Debug mode allows for the file paths to be reassociated, but at the expense of time, and in some cases resources. Enabling debugging will cause the compilation to take longer.
You wrote:
So what I am trying to say is that ALL I did when I removed the auto-populate was to click "Stop Auto Populate" and moved the Top-level VI up one folder level within the project. This causes it to fail compile (unless debugging is checked).
This makes complete sense. By moving ANY VI in a project and not having the folder set to auto-populate or having debugging enabled will cause an error because that VI that you moved isn't where it is supposed to be. This is the way that projects and the compilation of programs was designed.
To avoid this, don't move files around after they have been added to the project unless you have folders set to autopopulate, or have debug mode enabled. When you start shuffling file paths, associations get broken and compilations will fail.
Ben N.
Applications Engineering
Certified LabVIEW Developer

To stop Auto population of a field

Similar Messages

Maybe you are looking for