To write data into TDMS at a interval time

Hi, I am developing sensors (mass flow controller, thermocouple etc) and uses DAQ to read the data. Then I write the data into TDMS format.
The problem is I need to read the data at 1sec interval but write the data into TDMS format in 10sec interval.
I developed the vi in a while loop which I set the timing to be 5s while I figure the sampling rate of the DAQ Assistant to 1sec. But both read and write have the speed of 5s.
Please kindly share your opinion.
Thanks and regards.

Blueberet wrote:
I developed the vi in a while loop which I set the timing to be 5s while I figure the sampling rate of the DAQ Assistant to 1sec. But both read and write have the speed of 5s.
What do you exactly mean by this? Is it possible for you to post a snapshot of version of your code that isolates the issue?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

Read Write Data into a MS Word document

The requirement I am fullfilling directly specifies the need to write data into a Microsoft Word Document and if Necessary, Read Back data from a Microsoft Word Document. The data will be simple text but as time goes on I anticipate the systems engineers may expand the requirement. I want to cross one bridge at a time so I am just concentrating on the text issue. I must do it from within a stand-alone application. Not through a server, not through ASP, not through a browser, just a stand alone application. It appears from my own investigation of the JAVA API that this is not possible. Regrettably, I am only a day or so away from switching to C# or VB to get this job done. My first question is
1. Can Java Do this?
2. If not, does Sun Microsystems have any plans to add this capabiliy?
3. Can we make recommendations to Sun to add this capability to JAVA?

1. Can Java Do this?Java can do anything but there is no built-in ability to do just that.
2. If not, does Sun Microsystems have any plans to add
this capabiliy?
3. Can we make recommendations to Sun to add this
capability to JAVA?Very doubtful! MS Office document formats are not completely open to the public - and they are weird! Supporting this capability would probably require an agreement with Microsoft and it would mean you had to change the API for every time Microsoft chooses to change the document formats.
But there are some open source tools that claim to be rather good at reading and writing MS Office files. Take a look at this one:
http://jakarta.apache.org/poi/index.html

Unable to write data into excel file when it's close

Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
        int result = -1;
        try{
            SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
            String actionDate = formatter.format(new Date());
            rbtName = rbtName.replaceAll("'", "''");
            artistName = artistName.replaceAll("'", "");
            String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
            sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
            System.out.println(sql);
            log.writeLog(sql);
            result = stmnt.executeUpdate(sql);
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
        return result;
    public int openConnection(){
        int result = -1;
        try{
            Class.forName(dbDriver);
            c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
            stmnt = c.createStatement();
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
            return -1;
        return 1;
    }Thanks

HI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085

I want to write data into eeprom(93LC86) in parallel port using labview?

I want to write data into eeprom(93LC86) in parallel port using labview? Also I want to read data from EEprom.

Hi Mr. Mz,
after having a look to 93LC86-Datasheet I do not see a problem. The self-timing programming cycle of this Chip avoids timing problems; the rest is only logical stuff.
If you need more general info, how to use the parallel port, I recommend: http://[email protected]/ or
in case you need an example of SPI-Interface in LabVIEW with paraport - then write to: [email protected]
You are welcome
regards
wha

How to activate another worksheet in excel file and write data into it

Hi,
I am writing an automation program to collect test data and write the data to an excel file.
The excel file has several worksheets and now I can only write data to one sheet. Can anyone please let me know how to activate another worksheet and write data into it? Thank you very much.

You can do a search in the Example Finder for more Excel VIs.
They will give you a clearer idea of how to go about doing things in the way you need.
- Partha
LabVIEW - Wires that catch bugs!

Which background process writes date into alert log file in oralce

which background process writes date into alert log file in oralce

Hi,
AFAIK, all the background process are eligible for writing information to alert log file. As the file name indicates to show the alerts, so background process have the access rights in terms of packages (dbms), to write to alert log.
I might be wrong also..
- Pavan Kumar N

How to write data into a file

Hi
I want to write data from a string into a file. I am created a directory and a .doc file . But when i write this data from a string into .doc file , its give an error : File not found exception
But, when i check in my directory, a file is created with blank.
My code is:
import java.io.*;
import java.util.*;
import java.lang.*;
class createFile {
     public static void main(String[] args) {
try {
     String mss = "This is for dedo";
     FileInputStream fis;
     FileOutputStream fos;
File file = new File("C:\\JD\\m4.rtf");
// Create file if it does not exist
boolean success = file.createNewFile();
     success = true;
if (success) {
               System.out.println("suc");
               fis = new FileInputStream(mss);
               System.out.println(fis);
          fos = new FileOutputStream(file);
          int c;
               while ((c = fis.read()) != -1) {
     fos.write(c);
               System.out.println("mss");
          fis.close();
          fos.close();
     System.out.println("created");
// File did not exist and was created
} else {
// File already exists
} catch (IOException e) {
     System.out.println(e);
regards
madhu

InputStream inputStream = new ByteArrayInputStream(mss.getBytes());Use this to push into the file>
Ummm.... no. InputStreams are for reading, not for writing.
Anyway, OP, you're making a mistake. You're trying to open a stream to a file called "This is for dedo". Use FileOutputStream(File file) constructor or FileOutputStream(String pathToFile). You can then wrap that stream with a PrintWriter or whatever you need.

How can FMS create a text file and write data into it in the Server application folders?

Recently, I writed a programe about creating a text file and writing data into it in the server application folder. My code is as following:
           var fileObj = new File("/MyApp/test.txt");
           if( fileObj != null)
                  if(fileObj.open( "text", "append"))
                        fileObj.write( "                                                      ———— Chat Info Backup ————\r\n" );
                        fileObj.close( );
                        trace("Chat info backup document :" + fileObj.name + " has been created successfully!");
But when I run it, FMS throw the error as following: File operation open failed ; TypeError: fileObj has no properties.
Can you help me ? Thanks in advance.
Supplement: The text file named test.txt doesn't exist before create the fileObj, an instance of File Class.

Is MyApp the name of the application directory, or is it a child of the application directory? If myApp is the app name, just use test.txt as the path flag in the file constructor.

How to write data into xml through web service

Hi,
I have a requirement to write the data into xml through a web service .send me related links and sample code if any.

hi kiran,
write the data into xml : We need suitable set of java Beans for handling WebService Data.
However, there are cases when you may prefer an alternate mapping, or when there just isn't a well-defined mapping for your particular schema construct (xsd:choice is a common example). For these cases, IBM® WebSphere® has introduced a new feature called Custom Data Binding that allows you to integrate alternate data binding technologies like JAX-B, EMF/SDO and XML beans, as well to define your own XML schema to Java mappings. This article provides an overview of the technology and how you can get started integrating it into your application.
GO THru THis Links :
http://www-128.ibm.com/developerworks/websphere/library/
techarticles/0601_gallardo/0601_gallardo.html.
Hope It Helps.
Thanks
Varun CN

Write data into an ascii file

Hi
The programme below is a dual channel frequency analyser simulation which store the frequency, real, imaginary data into an ascii.asc file in a folder in the PC. For each teration of the loop a pop up comes requesting to replace the file with new data. I require to save the data of the iteration when the averages are completed of the Frequency Response Function (say the data after the 100 avarage). How can I link the append to file signal of the Write to spread sheet vi of the programme with the averages completed signal of the FRF vi of the programme. By doing this I will have the data after the specified average being done on the input signal.
Can some one help me on this.
Thanks
Mal
Attachments:
dualchannelspectrumanalyser-reimstore.vi ‏441 KB

Hello malkoba,
it's better than before, but not as good as taking the file write out of the loop. I cleaned up your vi a little bit...
At the moment you append to the file as long as the calculation runs. If the max number of averages is reached you want to replace your text file and will get a dialog window. Do you want to annoy the user with some unwanted dialogs? ("Replace a file? Why should I replace? I told you to write to that file!" and so on :-)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
dualchannelspectrumanalyser-reimstore[1].vi ‏443 KB

Write data into a collection

Hi All,
i am concerned with entering data into a collection (NameValuePair) of two elements using as assign activity. the data is string information and below is part of the xsd:-
<element name="Data" maxOccurs="1" minOccurs="0">
<complexType>
<sequence>
<element name="NameValuePair" maxOccurs="unbounded"
minOccurs="0">
<complexType>
<sequence minOccurs="1">
<element name="name" type="string"/>
<element name="value" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
my assign activities look like:-
<from>'Parent Concurrent Req ID'</from>
<to>$Invoke_InputVariable.payload/ns20:Data/ns20:NameValuePair[1]/ns20:name</to>
</copy>
<copy>
<from>$Receive_ConcReqID_InputVariable.Response/ns10:ConcRequestID</from>
<to>$Invoke_InputVariable.payload/ns20:Data/ns20:NameValuePair[1]/ns20:value</to>
</copy>
<copy>
<from>'Errored Child Req ID'</from>
(line 626) <to>$Invoke_InputVariable.payload/ns20:Data/ns20:NameValuePair[2]/ns20:name</to>
</copy>
<copy>
<from>$Invoke_ConcRequestsQuery_DB_QueryChildJob_DetailsSelect_OutputVariable.FndConcurrentRequestsCollection/ns9:FndConcurrentRequests[$ForEachCounter]/ns9:requestId</from>
<to>$Invoke_InputVariable.payload/ns20:Data/ns20:NameValuePair[2]/ns20:value</to>
but however i am getting an error at runtime that 'Exception is thrown because the to-spec at line 626 is evaluated to be empty'
Could someone suggest how i should get this done.. if there is a more correct approach, pls suggest.
regards
Rakesh

Hi Rakesh,
If you edit your assign and right click on the expression bellow you should see "ignoringMissingFromData" and "insertMissingToData" options... I believe the latter will solve your problem...
Cheers,
Vlad

Insert the data into two tables at a time.

Hi ,
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
create table [dbo].[test2](
[test2_id] [int] identity(1,1) primary key,
[test1_id] [int] not null
alter table [dbo].[test1]
add constraint [fk_test1_test2_id] foreign key([test2_id])
references [dbo].[test2] ([test2_id])
alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
references [dbo].[test1] ([test1_id])
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Thanks in advance.

You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
See sample code below:
CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
DECLARE @Test1dentity INT
DECLARE @Test2dentity INT
BEGIN TRAN
-- Insert NULL as test2_ID value is unknown
INSERT INTO #test1(test2_ID)
SELECT NULL;
-- get inserted identity value
SET @Test1dentity = SCOPE_IDENTITY();
INSERT INTO #test2(test1_ID)
SELECT @Test1dentity;
-- get inserted identity value
SET @Test2dentity = SCOPE_IDENTITY();
-- Update test1 table
UPDATE #test1
SET test2_ID = @Test2dentity
WHERE test1_ID = @Test1dentity;
COMMIT
SELECT * FROM #test1;
SELECT * FROM #test2;
-- Drop temp tables
IF OBJECT_ID('tempdb..#test1') IS NOT NULL
BEGIN
DROP TABLE #test1
END
IF OBJECT_ID('tempdb..#test2') IS NOT NULL
BEGIN
DROP TABLE #test2
END
web: www.ronnierahman.com

How could I Write data into a field in Oracle whose data type is VARCHAR2

The target data I want to write into Oracle is in http://tw.yahoo.com/info/utos.html.
Now, these data is stored in Mysql database and the field which stores these data uses "Text" as its data type.
I want to derive these data from mysql database and store them into a field of oracle database.
In oracle, I create field whose data type is varchar2(4000) to store these data.
I use JSP to derive data from mysql and insert into oracle through JDBC.
But the result of the page shows me that "javax.servlet.ServletException: Data size bigger than max size for this type: 25623".
Please anyone could help to resolve this problem?
Thank you very much.

My hunch is that the problem is that VARCHAR2(4000), but default, allocates 4000 bytes of storage. Depending on your database character set, a single character may require up to 4 bytes of storage.
If you are on 9i, you can declare the column VARCHAR2(4000 CHAR) to allocate 4000 characters of storage. You can also set NLS_LENGTH_SEMANTICS to CHAR, which will cause Oracle to assume that your declarations are in characters rather than bytes.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Can I write data into DSO directly ( by editing it)

Hi Gurus,
Here I have an issue where I was asked to create an object in BI7 where I can enter data directly into that object regularly i.e day to day basis. Is it possible if yes please give me the navigations and links if available to fix my issue.
Best Regards
Mohan Kumar

Hi Mohan,
Writing data directly into DSO means, we had a scenario where in the user will be entering the data at the transaction sceen and the same moment it need to get into the DSO. For that we have used the transactional ODS which can be used to writing purpose. But one thing with that isit can have only the active data table.
Regards
Vijay

How can we read and write data into plist using javascript in a html5 widget to be implemented into iBooks?

I had been trying to read from a plist to get file names of data files and it works fine when i run it in safari but after making its widget and putting it into iBooks it doesnot works. Please tell me any new method to read p list or correct my function if there is any correction. my function is following.
function plistread(n)
          if (window.XMLHttpRequest)
               xhttp = new XMLHttpRequest();
           else
        xhttp = new ActiveXObject("Microsoft.XMLHTTP");
               xhttp.open("GET", "Spell_Check_3.plist", false);
    xhttp.send();
    xmlDoc = xhttp.responseXML;
    var x = xmlDoc.getElementsByTagName("dict");
    var imgnamex = x[n].getElementsByTagName("string")[0].childNodes[0].nodeValue;
    xlength=x.length;
          return imgnamex;

See i need to access a plist file in my html5 widget, i implemented it in java script but it's not working so is there any other way to take out values from a plist file.

To write data into TDMS at a interval time

Similar Messages

Maybe you are looking for