'Today' button ceased to function after update.

Is it just me or the 'Today' button stopped working after the recent update?

I found that hiding the iCal window instead of closing it will keep the Today button functional. Just hope I remember not to touch that little red button. (Restarting iCal restores the function.) The search function will also keep on working as long as you do not close the window. Somehow these functions "die" with the window and are not restarted when a new window is created. Definitely not the quality of programming I was becoming used to with Apple.
Message was edited by: MacRicco

Similar Messages

SD card reader not functioning after update to Mavericks

SD card reader no longer functioning after update to Mavericks

Had the same problem.
In Terminal, enter the command
Killall Finder
Worked for me - - SD card showed up when I next inserted it.

My apple iphone airplay button doesnt pop up after update

my apple iphone airplay button doesnt pop up after update. can anyone help?

Okay... some how I got out of a previous posting that Wi-Fi was not working.
Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of that been tried? What about a reset or restart of the AppleTv?

HP B110a multifunction ceases to function after Hp Update

I have HP Photosmart B110a multifunction printer which ceases to work after applying "HP notification of Updates". Cannot print or access HP Solution Centre (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I prefer to always update software but never do for this B110a.
Family member with same B110a also had this problem today after inadvertantly updating, so I fixed as above.
Very time consuming. Could anybody inform me why this occurs & is there a solution. BTW I have stopped updates (as useful as an ashtray on a motorbike)
Regards
This question was solved.
View Solution.

Hi mookycat
Run the cd and select add a device. Should find the printer with the new IP address.
Another method would be to go to start, devices and printers, right click the printer, go to printer properties, select ports tab, select new port, click standard tcp/ip address, next, type in the ip address for the printer, next, finish. Make sure the printer is online.
Hope that helps you out.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

App Store update button displays bug message after updating, iOS 6.0

In iOS 6.0, after updating an app in the App Store, a weird message appears on the update button.
The button remains active giving the choice to update twice or more.

Dude there are many bugs in ios 6 it is not safe to use.

My iPhone 4's WiFi button is grayed out after update

Just spent the last 60 minutes on the phone with Apple support in regards to my iPhone 4's WiFi button being grayed out and unable to turn on. Went through all the steps and suggtions I found on the forums and support. Nothing worked.
Called Apple Support and was walked through a total factory reset of the phone...still doesn't work!
I was told that they can not help me because the phone is out of warranty...THIS HAPPENED AFTER UPDATING TO YOUR CRAPPY iOS 7 update! It's your glitch...using the wording from the nice Apple Support gal...she admitted it's their "occasional glitch" in the software. Now I have to get a new phone because of their software "glitch"?

Just spent the last 60 minutes on the phone with Apple support in regards to my iPhone 4's WiFi button being grayed out and unable to turn on. Went through all the steps and suggtions I found on the forums and support. Nothing worked.
Called Apple Support and was walked through a total factory reset of the phone...still doesn't work!
I was told that they can not help me because the phone is out of warranty...THIS HAPPENED AFTER UPDATING TO YOUR CRAPPY iOS 7 update! It's your glitch...using the wording from the nice Apple Support gal...she admitted it's their "occasional glitch" in the software. Now I have to get a new phone because of their software "glitch"?

Bevel effect moves Featured News buttons down and right after update

After I applied the update today, all of the Featured News buttons with the Bevel Effect have been moved down and right about 1/4" and I cannot seem to fix. I used the Bevel feature for all buttons in the Rollover, Mouse Down, and Active states. Before I applied the update, the bevel feature worked great, but now, as you can see from the image, the buttons have now moved down and to the right. I've even tried deleting the entire widget and starting over, but no fix.
The attached image shows the Featured News buttons. The top button is in ACTIVE state with the Bevel effect activated. The "Step 3" button shows the Rollover state with the Bevel effect activated. All other buttons show the NORMAL state - NO BEVEL. Before the update was applied, the buttons would appear in the same location as the NORMAL state, but now the buttons appear lower and to the right as you can see.

I'm having similar problems - and now I cannot remove the bevel from my buttons and they are shifting all over the place!

"Install button" doesn't function when updating to 10.6.1 or 10.6.2

The main problem is my "install" button simply doesnt trigger any response, it is highlighted and has the click animation but, again, heeds no effects. Nothing happens.
I recently installed snow leopard and there were quite a few problems but I have read that most of which can by solved by simply installing the updates. This is where the aforementioned problem is such an obstacle in my plight.
I have downloaded both DMG (6.1 and 6.2) files, repaired my start up disk and rebooted in safe mode and have tried restarted repeatedly for about 9 hours now. I have searched and havn't found any posts or topics with a problem quite like mine. I simply cannot install the updates I have already downloaded.
It is notable to mention that I downloaded these from the actual apple website not from my "software update" listing because those buttons dont function when I attempt to download an update either. The menu toggles back and from from the option where I hit "continue" and "agree" to the terms, that is to say, that each button activates the page that preceded it to come back up. Its a never ending cycle.
Please help.

this may happen if you are using a custom keyboard layout. delete the file /Users/username/Library/Preferences/ByHost/com.apple.HIToolbox.* and log out/in and try installing updates again.

Share button no longer working after updating to iOS 6.1.2

So this morning I updated both my iphone and ipad to 6.1.2 and now the share buttons in the app store no longer works, when I use the search function. To be specific if I do a search for anything and then try and open one of the apps in the search results and push the share button it never opens up the window to select a sharing option. The loading wheel at the top of just spins endlessly, but if I go to the "featured apps" page and click an app the share feature works. Worth noting that my iPad was also updated and works regardless

Hey I get this too does anyone else get it? Would just reinstalling fix it?
I have an iPhone 4 with 6.1.2.
xeni

[SOLVED] Suspend button no longer works after update

Recently update my system, and now pressing the suspend button (Fn+F3 in my case) doesn't suspend it to ram as it did before.
Running acpi_listen and hitting the button gives me the output "button/sleep SBTN 00000080 00000000 K" so clearly it's hearing it. Pressing the brightness buttons on the keyboard works (changes the brightness as expected), pressing the power button works to shut it down completely, closing the lid suspends it as expected... Just the suspend button stopped working.
I saw a post about a different thing which mentioned systemd's config file "/etc/systemd/logind.conf" so I tried uncommenting the line in that file which tells systemd to handle the suspend button, but no luck, not even after rebooting to hopefully get it to source that file.
Here is my ACPI folder's tree...
./events
./events/anything
./events/lm_battery
./events/lm_lid
./events/lm_ac_adapter
./handler.sh
./actions
./actions/lm_battery.sh
./actions/lm_lid.sh
./actions/lm_ac_adapter.sh
It has everything it should have, i think. The handler script has a "case" for suspend button.
Running "sudo pm-suspend" in a terminal suspends it, as does going into the XFCE shutdown menu and hitting suspend.
I can't think of anything else to try. Also, I did look around for other posts, but wasn't able to find anything. If I missed something, I appologize for the double post.
Thanks,
--Scott
EDIT: I swear I meant to put this in "laptop issues." This is embarrassing.
Last edited by scott_fakename (2013-01-12 21:41:45)

Sorry for not responding more punctually. handler.sh is as follows (the only modifications to it would have been things done by the system itself, as i haven't touched it)
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
00000001)
logger 'AC pluged'
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
Also, here is logind.conf, which is back to its original state:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
#HandleSuspendKey=suspend
#HandleHibernateKey=hibernate
#HandleLidSwitch=suspend
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
The line that i uncommented (to no effect) was "HandleSuspendKey=suspend".
I sort of have a workaround, inasmuch as I use XFCE and XFCE can handle the suspend key just fine, but the catch is that I have to have the DM up in order for it to do so, so it's not really a "solution" per se. Anyway. I don't know what else to try. The only other thing I could think of was to look in to laptop mode utils to see if others had had problems with it, but googling around yeilded nothing pertinent to this particular issue.

Buttons do not function after Flash Movie

I have a page with a number of buttons and a couple of flash
"list" components. One of these lists, gives the user an option to
select one of two modules and then navigates to a marker where a
flash movie plays. When the user exits the flash movie. This is
done via and exit button in the flash movie itself they returnt to
the page where they started. After navigating to that page
following the flash movie many but not all of the buttons are no
longer functional, e.g they do not receive mouseEnters etc.

Are the buttons in question Director buttons or Flash
buttons? In either case, is the code for these buttons in a
behavior that is attached to each button? Is there any part of this
code that disables the button?

Broken functionality after update (gnome, pam, glib2, systemd, etc.)

I upgraded my system yesterday after going for a month or two without updates and a ton of authentication-related stuff broke. Here are some of the issues/symptoms I'm currently experiencing:
Seeing this message in journalctl:
May 22 13:13:50 deepspace1 slim[203]: pam_loginuid(slim:session): set_loginuid failed
Pulseaudio is not started when logged into GNOME; aplay does not list any cards when invoked by my user:
[mcmlxxxvi@deepspace1 ~]$ aplay -l
aplay: device_list:268: no soundcards found...
[mcmlxxxvi@deepspace1 ~]$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
When I start pulseaudio manually, it only lists the dummy output.
USB sticks no longer auto-mount
I had been using GNOME 3 on forced fallback and logging in through SLiM.
I tried to upgrade libreoffice, which made me upgrade glib2 (to 2.36.2-1), which caused some other problems (pnglib, etc.) so eventually I upgraded everything (including kernel, systemd, pam (to 1.1.6-3) and gnome (to 3.8)) without rebooting. A couple of hours later I was suddenly thrown out of my session and saw something about some journaling/logging utility being passed too large a block (cannot find it in the logs at the moment) on the console. I rebooted and after logging in, gnome-session-failed (the "Oh no" screen) was started. GNOME started successfully when I logged in as root.
Googling around, some threads on here and based on the PAM message above, I tried to downgrade glib2 (to 2.36.1-3, 2.34.3-1, 2.34.2-2 and 2.32.4-1), to upgrade pam (to 1.1.6-4, which had appeared in the meantime) and then downgrade it (back to 1.1.6-3 and then to 1.1.6-1).
glib2 downgrade led to nowhere - later versions led to gnome-session-failed, while with earlier ones GNOME would not start at all). Downgrading pam led me to a situation where I received a "Login incorrect" after entering the username (both console & SLiM) which I had to fix through init=/bin/bash .
Following the advice here I cleared the hidden GNOME files and was finally able to log in (default mode, not fallback). Enabling fallback via gsettings (gsettings set org.gnome.desktop.session session-name gnome) brought back gnome-session-failed.
So I'm led to believe that I originally had 2 problems: fallback mode, which I read had been disabled, and the authentication problem. I'm currently struggling with the latter and would like help on how to approach the situation.
I'm not sure which logs would be needed for troubleshooting, and I'm still quite clumsy with journalctl, but will provide any logs requested.

You should *never* do partial upgrades. There is a reason why everywhere you see people saying that "partial upgrades are not supported".
I am not sure how you can be "clumsy with journalctl". As far as its most basic functionality, it is pretty darn straight forward. Though that is assuming you are willing to do a quick read of the man page... or even the output of "--help".

Submit button in Compressor disabled after update Pro Applications Update 2010-02

Dear all,
I recently bought FCS and the whole software works fine after installation. However, I had to use Compressor over the last couple of days and the submit button was completely disabled and in the cluster field the option this computer had dissapeard. I checked this forum for a solution and found it. It seems that the problem was Qmaster. After reinstalling both Qmaster and Compressor everything works again. I have use the following set of instructions:
http://www.digitalrebellion.com/blog/posts/how_to_reinstall_compressor_and_qmast er.html
The problem is that now each time I do a software update, I am asked to install the Pro Applications Update 2010-02. After installing this update, the problem occurs again (the submit button is grayed/greyed out). It seems that in my computer the update creates a problem.
Does anyone have the same issue and if so, what suggestion you recommend?. At the moment I am avoiding the update, but I may me missing important bug and other fixes.
Thanks a lot,
Oliver

I have experimented a bit and got the problem sorted. Iuninstalled FCS using the uninstaller from http://www.digitalrebellion.com/fcsremover/.Before installing the whole suite again, I realised there was and additionalApple Qmaster package in the Applications folder. I deleted this file and emptythe trash. Then did a fresh installation of FCS, performed an update andinstalled Pro Applications Update 2010-02.
And now all is up and running workingperfectly.
Oliver

Loss of Photoshop functionality after update

Yesterday I updated Photoshop as suggested in a message on my Creative Cloud. Since the update, much of the functionality inside of Photoshop has been lost from the cloning tool, filters e.g. Camera Raw, saving the file etc etc. I repeatedly get the message "Could not complete your request because of a program error." Prior to the update I had no issues with running Photoshop CC on my computer.
System: IMAC
Operating System : OS 10.8.3
Graphics : AMD Radeon HD 6770M 512 MG
Memory : 16 GB
I have uninstalled and reinstalled from Cloud ... to no avail and after a day of reading forums and trying many different options I just cannot get to the bottom of the problem.
Can anyone advise how do I revert back to the version before the update. Everything worked perfectly fine in that version.
Thank you

Thank you Mylenium for your quick response.
Ran the cleaner tool and reinstalled. Everything seemed to work for about 5 minutes and now it is again back to my original porblem with the "Could not complete your request because of a program error".
So unfortunately I am back to square 1 trying to find a solution.

Run function after updating values

I'm writing a fairly basic plugin where I need to have a function run after the values of a point have been updated.
I'm doing this to change the point's values:
params[POINT]->u.td.x_value = FLOAT2FIX(pointX);
params[POINT]->u.td.y_value = FLOAT2FIX(pointY);
params[POINT]->uu.change_flags = PF_ChangeFlag_CHANGED_VALUE;
This works fine for updating the values, however any code that goes after this block is run before the values actually change. Is there a way to force the change to happen after I have set the new values or is there somewhere else I can put the function so that it will be run after the values are actually changed?

Hi Jesse Toula! welcome to the forum!
if you want the change to be instantaneous, you can use AEGP_SetStreamValue() instead of the method you're using.
there is no function that is guaranteed to be called after you change the values.
UPDATE_PARAMS_UI might get called, and also a render call is likely.
you can set a flag in the sequence data to notify yourself of pos-t change operations that need to take place in such occurrences.
personally, i'd go with the AEGP_SetStreamValue() solution.

'Today' button ceased to function after update.

Similar Messages

Maybe you are looking for