Toggle Group Visibility while sorting results in error
I have a custom website in which we have embedded SQL Server Reporting Services reports.
The report in question has 3 nested row groups. The parent group is always shown, but the 2 child groups default to hidden and have their visibility toggled by the parent group. This works fine by itself.
There are several columns for which we've enabled Interactive Sorting. This also works fine by itself.
The problem occurs when the user sorts a column first, then toggles the visibility of the child groups. Toggling the groups before sorting works fine for some reason. The Error only occurs when sorting, then toggling visibility.
The error is a reporting services error. It says
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
There is no parameter in the report called "SortItem", so this seems to be some internal error which is triggered from this specific sequence of events.
Additionally, this error only occurs when the report is embedded in the custom website. This error does not occur when running the report in the standard reporting server website or in Visual Studio.
Any ideas on how to fix this?
Hi Jahbreeze,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support
Similar Messages
-
Keeping 'Various Artists' together while sorting ...
Ever get a CD with various artist, but want to keep them grouped together while sorting? Will there ever be a solution to this problem? I've noticed mostly with Rap CD's and Soundtracks but can't think of a way to keep these songs together ...
Solution?There is a solution with iTunes 7 but using the Album Artist field.
Select all your album song and do a get info. check the box "part of a compilation" and write something in the Album Arist field.
This field have been added in order to let you write various artists in the artist field while that may perform, for exemple, a tribute to "Ray Charles" that can be written in the album artist field. -
With the help of this forum I obtained a script which toggles the visibility of a specific layer without selecting the layer.
I would like to find out if the same functionality can be achieved for a layer group.
In other words can script toggle the visibility of a layer group with out actually selecting the layer group?
I understand some parts of Photoshop are not scriptable and wan to make sure this isn't one of them before I embark in creating the script.I have a script that does what you need. Can't remember if I obtained it from here, but I do know that the scripting guys in here are geniuses and can help you out with almost anything. That said, here is the script that you need. All you need to do is replace the three "Insert Layer Name Here" portions with the name of the layer you wish to toggle on/off. Don't thank me, thank whoever wrote it, (most likely someone here)
var targetID = getLayerIDByName('Insert Layer Name here');
if(undefined != targetID){
if(getLayerVisibilityByID( targetID ) ){
hideByName('Insert Layer Name here');
}else{
showByName('Insert Layer Name here');
function getLayerIDByName(name) {
try{
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "LyrI" ));
ref.putName( charIDToTypeID( "Lyr " ), name );
return executeActionGet(ref).getInteger(charIDToTypeID( "LyrI" ));
}catch(e){}
function getLayerVisibilityByID( id ) {
var ref = new ActionReference();
ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
ref.putIdentifier( charIDToTypeID( "Lyr " ), id );
return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));
function hideByName(name) {
var desc = new ActionDescriptor();
var list = new ActionList();
var ref = new ActionReference();
ref.putName( charIDToTypeID('Lyr '), name );
list.putReference( ref );
desc.putList( charIDToTypeID('null'), list );
executeAction( charIDToTypeID('Hd '), desc, DialogModes.NO );
function showByName(name) {
var desc = new ActionDescriptor();
var list = new ActionList();
var ref = new ActionReference();
ref.putName( charIDToTypeID('Lyr '), name );
list.putReference( ref );
desc.putList( charIDToTypeID('null'), list );
executeAction( charIDToTypeID('Shw '), desc, DialogModes.NO );
EDIT- whoops, I just realized this is only for layers, not groups. But hopefully it's a starting point -
hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out
olliemilne wrote:
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers. This would allow you to install the original OSX . I have my doubts though.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA. Doing that will serve no useful purpose.
You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
Ciao. -
i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice
Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues? -
"Toggle mask visibility" shortcut?
Is there a keyboard shortcut for "Toggle mask visibility"? I can do this by ALT-clicking on the layer's mask, but I would like to assign a shortcut for this on a button on my Wacom Intuos 4 drawing tablet. So far I haven't found a menu shortcut for it, nor have I found a way to add my own (Edit-Keyboard shortcuts) as the function isn't listed there.
There are some big difference between (Alt+Click) on the Layer's Layer Mask Icon in the Layer palette. There does not have to be a current target the cursor position sets the target. And (Alt-Click) is a toggle. An Action step "Select mask channel is quite different. If nothing is targeted. If the top layer has a layer mask it will become the Photoshop target and be displayed grayscale in the image window. If there is a currently targeted layer that has a layer mask that layer's layer mask will become the Photoshop target and it will be displayed grayscale in the image window. For any other document state that step will fail with an error message like its not a currently available option. The step is also not a toggle.
To tell the truth I do understand why the op ask the question. For the toggle requires a mouse position and a click. With their Wacom Intuos4 they can set a express key to Alt. The tablet may even be come configured the way. When they press the express and click the pen it will be a toggled. In Any case there needs to be a mouse position and a click to set the target weather they use the (Alt-Click) toggle or they use an action to display a Layer mask in the image window grayscale. Something has to target a layer with a layer mask. In an action that state may exist as a result of prior steps. An action with "Select mask channel" as the first step can easily fail for the current Photoshop target may not a the requited layer mask. -
Hi,
I am using SSRS 2008 R2.
I have two TABLIX in a report. One is TABLIX with row/clumn grouping. 2nd one is flat view.
Here each tablix is dispaly it's data on single page for each.
My Requirement on First TABLIX is:
1. I have to make column headers visible on scrolling down
2. Export to PDF - column headers must be visible on all the pdf pages for same tablix data.
But ... either one is achieved at my end.
so ... any suggestions please to achieve both at same time.
thank you in advance.
best regards,
venkat.Hi G.V.Naidu,
According to your description, the first tablix is matrix to use display data.
In SSRS, if we want to fix matrix header visible while scrolling and repeat header columns on each page, we can select the corresponding option to enable this function. Please refer to the steps below:
1. Right click tablix, and select Tablix Properties.
2. Select “Keep header visible while scrolling” and “Repeat header rows on each page” to enable these function.
If we are use table to display data, please refer to the article about Repeat Header / Keep Header Visible in Tables.
http://blogs.msdn.com/b/robertbruckner/archive/2008/10/13/repeat-header-and-visible-fixed-header-table.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Using hyperlink to toggle layer visibility?
Okay, I've got a few threads going in other forums on this, and I'm getting a little frustrated with retyping it all, so I'm going to try to be brief... if you have any questions on what I'm trying to do, sorry for being vague, just ask and I'll try to clarify (I know, I hate posts that don't give enough info to work from).
OKay... I work with surveillance systems, and for one customer, I'm taking existing PDFs they have of site floorplans, loading them into Ilustrator CS5, adding icons and text showing camera locations and fields-of-view, then exporting to PDF, loading that into Acrobat Pro X, and adding a hyperlink to each camera icon that when clicked, will open a window with a still capture from that camera, so they can see what the view is "supposed" to look like.
This works fairly well, and the client is happy with it... there's just one annoyance: every click produces a dialog box warning about opening an external program, and in newer versions of Reader, there's no "Don't display this again" checkbox. A way around this would be great, but I had a better idea:
I'm already creating layers in Illustrator: one for the floor plan, a second for the camera icons, a third for the text, and a fourth blank one so I can "swap out" the underlying floor/camera info without losing the hyperlinks (anywhere from 16 to 30, depending on the site).
I had the idea that what I could do, is add a separate layer for each camera's sample image, which would allow me to add the image directly to the document, and have it just appear over the floor plan, rather than loading in a separate app. Then I could have the image layers start out invisible, and toggle the visibility by clicking the camera icon.
So I found this article that describes changing layer visibility from a hyperlink: http://help.adobe.com/en_US/Acrobat/9.0/Professional/WS58a04a822e3e50102bd615109794195ff-7 c5b.w.html
It... sort of works. I can create a link that will show a hidden layer... but not re-hide it. I created a separate link that would hide it... but not show it. Not really suitable - I'd like to have the same link toggle the layer on/off (heck, it would pretty much have to, or you KNOW the end users will get confused).
And the whole process seems a little clunky, at least from the above instructions. Is there a better way to do this in Acrobat X? Maybe a way to do it all within Illustrator? Hope I'm clear enough about what I'm trying to achieve.
If all else fails, is there a way to get rid of the $&^@*#!!! external program warning popup??
Thanks, all!Forget that help page example, it's only practicable if you're setting a very simple pattern of layers.
Instead, you should look at the JavaScript commands to control the visibility of individual layers, referencing them by their stacking order or name.
For example this snippet will turn on the layer called "camera1":
var ocgArray = this.getOCGs();
for (var i=0; i < ocgArray.length; i++) {
if (ocgArray[i].name=="camera1") ocgArray[i].state = true;
You can easily extend this idea by creating a document-level function in the PDF, and calling that function from your links. For example if all your camera layers are named "camera1","camera2", etc. and you have a doc-level function like this:
function showCamLayer(theName) {
var ocgArray = this.getOCGs();
for (var i=0; i < ocgArray.length; i++) {
if (ocgArray[i].name.substr(0,6) == "camera") ocgArray[i].state = false;
if (ocgArray[i].name == theName) ocgArray[i].state = true;
then you can set your links to "run a JavaScript" and enter a single-line command such as showCamLayer("camera4") -
Problem while Recording Result
Hi,
While performing result recording using QE01, I am getting error like
The operation does not exist for the insp lot (and work center) entered
Please helpHi,
Please refer the below link...
http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
Kuber -
While using F-29 ERROR:-NO SPECIAL GL DEFINED FOR ACCT TYPE D
Dear sap guru's
Please help us to sort out this problem as on urgent basis.............we will mostly appreciates your solution.
Matter:While using f-29 error:-NO SPECIAL GL DEFINED FOR ACCT TYPE D.IND A RECON ACCNT 160100000Dear Sap Team
I would like to inform you that this problem is belongs to FI part
I want to know where i can maintain this data please tell me the table or layout from where i can maintained,I will mostly appreciate your solution............... -
While upgrade to LWAP error : AP Radios not supported.
Hello Experts,
i am using upgrade tool and LWAP image c1100-rcvk9w8-tar.123-11JX1.tar.but still i am not able to upgrade to LWAP.
when i check detail log in upgrade tool its shows the AP Radios not supported.can somebody help me in this regard. Thank you in anticipation..
Below are the logs of the AP while doing LWAP upgrade
*Mar 1 00:00:05.712: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:00:05.713: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:05.714: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:05.715: %DOT11-2-RESET_RADIO: Interface Dot11Radio0, Radio firmwar
e file not found, Trying hardware reset on radio
*Mar 1 00:00:12.706: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:12.707: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:13.008: %DOT11-2-RADIO_FAILED: Interface Dot11Radio0, failed - fir
mware file not found
-Traceback= 18F68 405868 3FDFB0 4072E0 129B34 129BDC 116F0 11904 1357B0
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:15.059: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:15.061: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:16.061: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:16.617: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:16.617: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1100 Software (C1100-K9W7-M), Version 12.3(8)JA2, RELEASE S
OFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 30-May-06 17:41 by pwade
*Mar 1 00:00:16.618: %SNMP-5-COLDSTART: SNMP agent on host RH-W-D36-AP1121G is
undergoing a cold start
*Mar 1 00:00:16.642: Writing radio coredump to 'flash:/r0.rcore'
*Mar 1 00:00:17.334: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar 1 00:00:31.891: Writing radio coredump to 'flash:/r0.rcore'
*Mar 1 00:00:37.051: Interface Dot11Radio0: not starting because stop-on-failur
e set
*Mar 1 00:00:37.058: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to do
wn
*Mar 1 00:00:38.058: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
RH-W-D36-AP1121G#
Sh ver : and sh flash
RH-W-D36-AP1121G#sh fla
RH-W-D36-AP1121G#sh flash:
Directory of flash:/
2 -rwx 3650405 Mar 15 1993 18:04:33 +00:00 c1100-k9w7-mx.123-8.JA2
3 -rwx 272 Mar 01 2002 00:00:16 +00:00 env_vars
7 -rwx 525184 Mar 01 2002 00:00:37 +00:00 r0.rcore
5 -rwx 79 Mar 01 2002 02:12:52 +00:00 private-config
4 -rwx 2072 Mar 01 2002 02:12:52 +00:00 private-multiple-fs
6 -rwx 6626 Mar 01 2002 02:12:51 +00:00 config.txt
8 drwx 128 Mar 01 2002 02:31:37 +00:00 c1100-rcvk9w8-mx
7741440 bytes total (1694208 bytes free)
RH-W-D36-AP1121G#sh ver
Cisco IOS Software, C1100 Software (C1100-K9W7-M), Version 12.3(8)JA2, RELEASE S
OFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 30-May-06 17:41 by pwade
ROM: Bootstrap program is C1100 boot loader
BOOTLDR: C1100 Boot Loader (C1100-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
RH-W-D36-AP1121G uptime is 23 minutes
System returned to ROM by reload
System image file is "flash:/c1100-k9w7-mx.123-8.JA2"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1121G-E-K9 (PowerPCElvis) processor (revision A0) with 15038K/13
36K bytes of memory.
Processor board ID FOC08301UAW
PowerPCElvis CPU at 197Mhz, revision number 0x0950
Last reset from reload
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:11:93:F1:0E:BA
Part Number : 73-7886-07
PCA Assembly Number : 800-21481-07
PCA Revision Number : A0
PCB Serial Number : FOC08301UAW
Top Assembly Part Number : 800-22053-04
Top Assembly Serial Number : FHK0835V1J0
Top Revision Number : A0
Product/Model Number : AIR-AP1121G-E-K9
Configuration register is 0xF
RH-W-D36-AP1121G#
Also i reformated the iamge K9w7 again as i was only able login through CMD and while explorer still this error coming-
RH-W-D36-AP1121G Home Page
Cisco Systems
Accessing Cisco AIR-AP1121G-E-K9 "RH-W-D36-AP1121G"
Web Console - Manage the ap through the web interface.
Show diagnostic log - display the diagnostic log.
Monitor the router - HTML access to the command line interface at level 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Show tech-support - display information commonly needed by tech support.
Extended Ping - Send extended ping commands.
Help resources
CCO at www.cisco.com - Cisco Connection Online, including the Technical Assistance Center (TAC).
[email protected] - e-mail the TAC.
1-800-553-2447 or +1-408-526-7209 - phone the TAC.
[email protected] - e-mail the HTML interface development group.
Appreciate your quick response and suggestions.Hello ,
What are you refering by word Broken AP(1121series ) how do i confirm it is broken.
when i access it from CLI it looks completely fine m but when i do GUI access it shows the above GUI screen.
Can you Please help me to how to to check it is damaged.
Appreicate all your respnse.
Regards,
KA. -
Distribution Cycle KSV5 Resulting in error when deselected the test run chk
Hi Experts,
Please help me out
iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
First Message:
Balance per segment 9999 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 9999 is not zero.
The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
2nd Message
Balance per segment 1000 is not zero
Message no. FAGL_COFI025
Diagnosis
Balance per segment 1000 is not zero.
The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
System Response
With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
Procedure
If there is a programming error, please inform your system administrator.
If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
3rd Message
No update performed due to an error
Message no. GA719
Diagnosis
A serious error occurred during processing.
System Response
Processing is continued as far as possible, but results are not posted.
Procedure
This error is shown in the error list before this error message. Here you can find more information about this particular error.
I would appreciate an early reply........!!!
Thanks & Regards,
NeelaHi,
Check notes 764652 and 897086; it might be helpful.
Regards,
Eli -
Solman_admin password changes results in errors during managed system setup
Hello all,
I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
Currently I have 6 messages at SAP, but no solution yet.
Situation:
Solman 4.0
SAP_BASIS 701 0003
SAP_ABA 701 0003
ST-PI 2008_1_700 0000
PI_BASIS 701 0003
SAP_BW 701 0003
CRMUIF 500 0001
SAP_AP 700 0014
BBPCRM 500 0013
CPRXRPM 400 0014
BI_CONT 704 0002
ST 400 0019
ST-A/PI 01L_CRM570 0000
ST-ICO 150_700 0016
ST-SER 701_2008_2 0002
So, it is uptodate.
The problem:
Changing the solman_admin password results in errors during connecting a managed system.
In the inital setup the solman_admin is created with a pasword.
After the basic setup I setup some managed systems.
In the meantime I had to change the password of solman_admin
I am logged in with solman_admin and do solman_setup to setup the managed system.
During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
This is the logging:
Step SSO Details
Found SID for SSO ACL entry : MSD
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
!! Exception : Password logon no longer possible - too many failed attempts
A failure occured while importing ABAP SSO ticket certificate in ABAP stack
!! Exception : java.lang.NullPointerException
Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
Anyone else has this problem?
gr
SanderJust for clarification it's Solman 7.0 EHP1 correct?
Also you may want to unlock the following user:
localhost sys=70 client=300 user=SOLMAN_ADMIN
Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
Hope this helps, please let me know and we can go from there. -
Hash GROUP BY And Sort GROUP BY
Can anyone please explain how does Hash GROUP BY And Sort GROUP BY exactly work ?
Thank you.As the name suggests, SORT GROUP BY achieves the same goal by sorting.According to Tom SORT GROUP BY doesn't always sort correctly .. tried to understand his explanation as he said "It always did a BINARY SORT - not a character set sort. So the data would be sorted incorrectly if you use anything but very simple ASCII strings..."
can you give me an example where binary value of a string A is greater than string B while ascii value of string B is greater than string A ?
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:75397449124988
Thank you -
Does multiple instances of DAQmx start task result in error?
I am trying to read voltages from pressure transducers and LVDTs in two separate While Loops. But when running the program there is an error regarding DAQmx Start Task.vi. So I was wondering if multiple instances of DAQmx Start task results in error. I have attached the vi.
Thanks
Attachments:
IsoConsolidationDAQMAX02.vi 140 KBThank you for the reply. New to Labview so I didn't know that we had to search using the error code, I tried searching using text though. Will do that from the next time, thanks.
I do not have the problem with the write tasks but only with the read tasks. Right now I have one start task for all the input from the pressure transducers and LVDTs and three start tasks for the three analogue outputs and the program seems to run fine.
Maybe you are looking for
-
802.1x authentication fail
i have a juniper device linux operating system on that we have radius server configured and i am trying to integrate my WLC with that radius i have added WLC as a host there in radius on wlc i have configured authentication like radius ip shared secr
-
XSLT, Call transformation, Character Set
Hi Using call transformation (XSLT scheme) to convert XML file to html the problem is that When HTML displayed in sap, - name 'Søren Fjællegård' is displayed like 'S#ren Fj#lleg#rd' What to do ? Any ideas to handle special character sets
-
AS2 Site Audio Links Not Working, Please Help!
I have built a site for a client using AS2 which contains links to streaming mp3s. The audio loads and runs just fine in Safari but malfuntions/doesn't even play in other browsers. Here is the site in question: labbatomarco.com I'm hoping that o
-
Read PDF files in Safari on 10.5 --- HELP PLEASE!
I accidently deleted the Internet Plug-in to read PDF files in 10.5. The plug in is located in /Macintosh HD/Library/Internet Plug-Ins/ I believe it is called "Adobe Acrobat ???" (or something like this) If someone could post it or e-mail it to me, I
-
DB adapter, XSD not getting generated
Hi', I am using a DB adapter and using option for "pure sql query", when I paste the sql query the XSD file is not properly getting generated. Its only creating the input part but not generating the output part of the XSD, I have checked the query it