SSRS 2008 R2 - Column Headers of a tablix visible while scrolling - Then the column headers not visible on 2nd page onwards for PDF EXPORT. it's vice versa. Hence it is possible to provide both at same time ?

Hi,
I am using SSRS 2008 R2.
I have two TABLIX in a report. One is TABLIX with row/clumn grouping. 2nd one is flat view.
Here each tablix is dispaly it's data on single page for each.
My Requirement on First TABLIX is:
1. I have to make column headers visible on scrolling down
2. Export to PDF - column headers must be visible on all the pdf pages for same tablix data.
But ... either one is achieved at my end.
so ... any suggestions please to achieve both at same time.
thank you in advance.
best regards,
venkat.

Hi G.V.Naidu,
According to your description, the first tablix is matrix to use display data.
In SSRS, if we want to fix matrix header visible while scrolling and repeat header columns on each page, we can select the corresponding option to enable this function. Please refer to the steps below:
1. Right click tablix, and select Tablix Properties.
2. Select “Keep header visible while scrolling” and “Repeat header rows on each page” to enable these function.
If we are use table to display data, please refer to the article about Repeat Header / Keep Header Visible in Tables.
http://blogs.msdn.com/b/robertbruckner/archive/2008/10/13/repeat-header-and-visible-fixed-header-table.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Similar Messages

HT1212 My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.

My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

I am living USA and Mexico for my work and I do have account in USA but is that possible to make Mexican account same time? I like to keep USA account when I'm in USA

I am living USA and Mexico for my work and I do have account in USA but is that possible to make Mexican account same time? I like to keep USA account when I'm in USA

If you have a valid payment method in Mexico (e.g. Mexican credit card) billed to a Mexican address then I guess you could. There are certain disadvantages to having more than one account, but in your case I don't see they apply. Just make sure you have copies of everything you buy from each country on backup because you will no longer be able to redownload items when you can no longer use that country's store.

TS3048 I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

I have just purchased a new apple cordless keyboard. The numeric line of keys along the top are not functioning as they should. For example I am unable to get a question mark or a forward slash. I have tried holding down both shift and alt keys.

Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped. It seems as though the line of number keys along the top aren't actually doing what is printed on them. Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes. So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key. The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along. Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead. It is going to drive me mad if every time I want to type something it is a guessing game....! What do you suggest - question mark

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
on IE to go to the previous page. Then it catch the error as:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.
I am using SQL2012 and Sharpoint2013.

Hi Alisa,
Thanks for your reply, I changed the web.config, but the issue did not resolved.
I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
This issue can not reproduce on Chrome only occur on IE.
So, do you have some details suggestion for me to fix it?
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<configuration>
<configSections>
<sectionGroup name="SharePoint">
</sectionGroup>
<location path="_layouts/15/TA_AppMonitoringDetails.aspx">
<appSettings>
<add key="ChartImageHandler" value="storage=memory;timeout=20" />
</appSettings>
</location>
<location path="_layouts/15/ReportServer/RSViewerPage.aspx">
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
</location>
<system.net>
<defaultProxy />
</system.net>
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
<add key="aspnet:RestrictXmlControls" value="true" />
<add key="FeedCacheTime" value="300" />
<add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
<add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
<add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
</appSettings>

Does Verizon not have a live chat option for customer service? or a phone number? I'm having a heck of a time trying to find how I can contact them

Does Verizon not have a live chat option for customer service? or a phone number? I'm having a heck of a time trying to find how I can contact them

As taken directly from the VerizonWireless website.
(and I am not a chat or customer service agent, I just hang around here too much)
CHAT: Contact Us | Verizon Wireless
Customer Service
(800) 922-0204
or dial *611 from your mobile phone
View the *611 On-Screen App for Android Video
6 AM - 11 PM, Mon - Sun

Upgrade Premiere Pro CS5.5 on PC to CS6 on MAC? Use both at same time?

Can I upgrade from my Premiere Pro CS5.5 on my PC Laptop to CS6 on my new MAC machine? If so, will I still be able to use my CS5.5 on my PC at the same time as using CS6 on my MAC?
I'd be grateful for your advice and, if this is possible, how to proceed.
Many thanks,
Andrew Kent

The original poster was not on the Creative Cloud subscription.
What a mess.
I think what Baber is saying is Adobe considers an "Upgrade" purchase from a prior license as an entirely new separate license. That allows you to run the old version license on a different platform from the new "Upgrade" license.
So if you need to run both platforms (Windows and Mac) your options are:
Cloud subscription
Purchase a whole new second license to be able to run the current version on both platforms (what we did)
Wait for an point version update and upgrade going to the other platform. That allows you to run on both Windows and Mac, but one version back on one of the platforms but at a greatly reduced price until the next point upgrade.
Seems pretty convoluted and obtuse. But ..."It is what it is."

Itunes, Airport Express, Multiple Speakers... can't play both at same time

Set up 2 aiport express units with speakers attached. Connected to my wi fi no problem and can play through either speaker... but can't play through both at the same time? Any suggestions gratefully received . Thanks

ok, was being thick. In the multiple speakers box in itunes I need to drag and resize the box so that I could see all the speakers I have attached, now everything is working fine.... and I'm loving it!
Would be nice if the multiple speaker box automatically resized to show everything attached.... but I'm bound to say that aren't I lol.

Populate a cell with column headers, seperated by a comma, if any of the columns rows contain text

I have a table, much like the one below:-
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
John
Yes
Paul
No
Dave
Jay
No
Matt
Yes
Yes
Karl
Lois
Jane
Maybe
Anna
Barry
No
Yes
Maybe
I want to populate a cell on another sheet with the column headers if the row contains text. For examplein the case of 'Matt', the value I want returned is 'E, R' becuase there is text in the 'Matt' Row in columns E and R
Anyone have any ideas?
Thanks,
Karl

Hi Hans,
Thanks for that. It works to an extent in that it returns the correct Column, but I actually want it to return the Column heading. It's my fault for not making it clear, I should have used different names for the column headings rather than just A to S......apologies.
Other than that, it does work, but if you have any suggestions on how to get the actual column heading, that would be great.
For example:-
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon
Tue
Wed
Thu
Fri
John
Paul
Yes
Dave
Jay
Yes
No
Matt
Karl
Yes
Lois
Yes
Jane
Anna
Barry

Memory works in either slot, but not both at same time?

Hi, I've recently purchased some ram to upgrade my girlfriend's powerbook G4 15" 1.3ghz, 2x1gb chips. Before I installed it, I noticed the mac was only reporting 512meg of ram when we thought there was 1gb. Sure enough, there were actually 2x512 in there, but only 1 chip was being recognized. So, I tried the new ram anyway, to find of course that it would only recognize 1 of the 1gb chips also. In searching, of course, I've found all sorts of info on the lower slots going bad, but I've found in testing that any of the 4 chips (2 512mb and 2 1gb) will work in either slot, just not 2 chips at a time. So, both the upper & lower slots will actually function.
When I run the hardware test on the restore cd (sorry, I'm probably using the wrong name for this. I don't have it in front of me, and I generally.. gasp.. use PC's) I get this error:
post/0/2048 SODIMM0/J25LOWER
Now, she did upgrade to leopard maybe 6 months ago, but other than that, no major changes.
So, my questions would be, is this the same as the lower slot failure that everyone is having? Or is this something different? And, of course, is there anything I can do or try to fix it?
Oh, ya, and, this machine is well out of it's warranty, so hopefully no expensive repairs are needed?

Hi, beardo. My guess, and that's all it is, is that you have the beginnings of a classic lower RAM slot failure. I suspect, and it's only a suspicion, that lower RAM slot failures are caused by cracked solder joints, which in turn are caused by repetitive heat-related expansion and contraction of components on the logic board including the RAM sockets. My hunch, and it's only a hunch (have I qualified this post enough yet?) is that your lower slot is coming unstuck from the logic board only to the extent, so far, that when the spring-loaded slot is stressed in the particular way that having RAM modules in both slots produces, a crucial lower-slot contact is broken and the RAM in it isn't seen. When the lower slot and/or the logic board is stressed a little differently, by having a module in only one slot, the contact isn't broken. I imagine that the tolerances involved are minute: probably thousandths of an inch. I won't be surprised if the problem worsens to the point that your lower slot is completely undetected, particularly if you keep stressing the hardware by inserting and removing RAM modules in both slots, trying to find the cause. And I have nothing at all to suggest except all this guesswork and this repair option. I wish I could offer something more promising and helpful.

Two external FW drives - Can't mount both at same time?

Hi, I just got two new 200 GB ATA drives and I've installed them in two separate cases. I have managed to get both drives formatted and mounted, but only one at a time. If I have one drive switched on and mounted, as soon as I switch the other one on, the system hangs and I get the beach ball. If I then switch off the drive I just put on, things return to normal. If I unmount the first drive and switch it off and then turn on the second drive it mounts normally.
I have another FW drive with a different type of controller in its case (Oxford Semiconductor Ltd). I can mount that no problem and then mount either of the two new drives. The only thing I can't get to work is the the two new drives in their cases made by the same manufacturer. System Profiler says that the external cases contain Prolific PL3507 Combo devices.
I have tried every way of connecting the drives - i.e. two cables one from each drive to each FW port on my computer and also daisy chaining the drives, but I still can't get the two new drives to mount together. If I use my old FW drive and one of the new ones, I have no problem getting them both to mount with two cables or daisy chained.
So I'm stuck now - any advice I can get here will be greatly appreciated. Thanks in advance.
Powermac G4 MDD 1GHz DP Mac OS X (10.3.9) 2 GB RAM

Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
Thanks again for your post. Cheers from Bonnie Scotland.

We have an airport extreme wifi in house, but also want to set up a hardwired ethernet connection for gaming and streaming of netflix. The computer only sees one or the other not both at same time.

We have a new iMac 2.9ghz and are running an airport extreme set up in house with several express entenders. The problem is that our son is streaming netflix and doing on line gaming and hogging all the band width. Time Warner tech suggested a hard wired ethernet connection to computer base sattion next to computer so that it can have direct conenction to internet. After much fishing of wire the connection worked great, but the wifi connection for the house is gone. I unplugged the ethernet connection and everything is fine. I read the articles about adjusting network preferences, but the issue seems to be in the extreme not in the computer. the connection goes from cable modem to extreme, from extreme to house and to hard wired conenction to other computer. Do we need a splitter before the extreme?

No. Something else is going on.
Your son may be hogging all the bandwidth but your wireless network should never simply disappear. Moreover, if your son isn't doing anything the available bandwidth for other devices should remain unaffected.
I suspect that something is miswired, and from what you describe I suspect that link is between the Extreme and the "other computer".
The way to accomplish what you propose is
Modem > Ethernet cable to Extreme's WAN port
Extreme's LAN ports > wired Ethernet devices.
There should be nothing but an Ethernet cable linking an Extreme LAN port and any other wired device. If you run out of available LAN ports on the Extreme, you need to by an "Ethernet switch" - they are not expensive, but don't call it a "splitter" or you will only confuse yourself. The switch would be connected to one of the Extreme's LAN ports, and you would connect additional devices to it. You can also use one of your Expresses for that purpose, assuming it is the current generation model with two Ethernet ports.

HT5517 How can i play apple tv and tango air at same time, both are on apple tv listing but i cannot play them both at same time?

CAn anyone help me, speakers are both displayed on apple tv but cannot play both, appletv with speakers and a new tango air!

hmmmm. i suspect you've already found this document:
AirTunes: Error -3256 when streaming to multiple AirPort Express units
perhaps also try working through the techniques from the following document to see if they are of any help with this:
iTunes for Windows: Music Sharing with Windows Internet Connection Firewall

SSRS 2008 R2 - Column Headers of a tablix visible while scrolling - Then the column headers not visible on 2nd page onwards for PDF EXPORT. it's vice versa. Hence it is possible to provide both at same time ?

Similar Messages

Maybe you are looking for