Toggle selector not working...

I recently connected my nano to a Altec Lansing dock speaker system, and ever since then, my toggle does not work, neither does the center button. However, when it is connected to the speakers, i'm able to use the toggle. Does this sound like a hardware failure? Should I make a genius bar appt?

Hi Tim,
What's the default selection of your Toggle Button? Is it Off? And when Toggle Button is Off, some components show up by dynamic visibility control?
I reproduced the problem just when the default selection of Toggle Button is Off and I have submitted a report in system.
But when the default selection is On, things go well. For the 100% transparency of the Button, there is a walkaround of this problem: set the default selection is On and firstly use On to dynamically show some components and click the button Off, some others show up.
Hope this can help!

Similar Messages

Style selector not working...

Why does the mx|ToggleButtonBar style selector not work in the following code?
<?xml version="1.0"?>

<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                  xmlns:s="library://ns.adobe.com/flex/spark"
                  xmlns:mx="library://ns.adobe.com/flex/halo">
     <fx:Style>
          /* Not working */
           mx|ToggleButtonBar{
               buttonStyleName:"mytoggleButtonBarButtonStyle";
               firstButtonStyleName:"mytoggleButtonBarButtonStyle"
          /* okay */
           #tbb{
               buttonStyleName:"mytoggleButtonBarButtonStyle";
               firstButtonStyleName:"mytoggleButtonBarButtonStyle"
          .mytoggleButtonBarButtonStyle{
               skin: ClassReference("skins.custButtonSkin");
     </fx:Style>
     <s:VGroup>
          <mx:ToggleButtonBar id="tbb">
          <mx:dataProvider>
               <fx:Array>
                    <fx:String>Flex</fx:String>
                    <fx:String>Flash</fx:String>
                    <fx:String>ColdFusion</fx:String>
               </fx:Array>
          </mx:dataProvider>
     </mx:ToggleButtonBar>
     <mx:ToggleButtonBar id="tbb2">
          <mx:dataProvider>
               <fx:Array>
                    <fx:String>Flex</fx:String>
                    <fx:String>Flash</fx:String>
                    <fx:String>ColdFusion</fx:String>
               </fx:Array>
          </mx:dataProvider>
     </mx:ToggleButtonBar>
     </s:VGroup>
</s:Application>

<?xml version="1.0"?>

<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                  xmlns:s="library://ns.adobe.com/flex/spark"
                  xmlns:mx="library://ns.adobe.com/flex/halo">
     <fx:Style>
     @namespace mx "library://ns.adobe.com/flex/halo";
          @namespace s "library://ns.adobe.com/flex/spark";
          /* Not working */
           mx|ToggleButtonBar{
               buttonStyleName:"mytoggleButtonBarButtonStyle";
               firstButtonStyleName:"mytoggleButtonBarButtonStyle"
          /* okay */
           #tbb{
               buttonStyleName:"mytoggleButtonBarButtonStyle";
               firstButtonStyleName:"mytoggleButtonBarButtonStyle"
          .mytoggleButtonBarButtonStyle{
               skin: ClassReference("skins.custButtonSkin");
     </fx:Style>
     <s:VGroup>
          <mx:ToggleButtonBar id="tbb">
          <mx:dataProvider>
               <fx:Array>
                    <fx:String>Flex</fx:String>
                    <fx:String>Flash</fx:String>
                    <fx:String>ColdFusion</fx:String>
               </fx:Array>
          </mx:dataProvider>
     </mx:ToggleButtonBar>
     <mx:ToggleButtonBar id="tbb2">
          <mx:dataProvider>
               <fx:Array>
                    <fx:String>Flex</fx:String>
                    <fx:String>Flash</fx:String>
                    <fx:String>ColdFusion</fx:String>
               </fx:Array>
          </mx:dataProvider>
     </mx:ToggleButtonBar>
     </s:VGroup>
</s:Application>

Descendant Style Selector not Working

Anyone know why this descendant style selector does not work?
<?xml version="1.0" encoding="utf-8"?>
<s:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:comp1="comp1.*" xmlns:comp2="comp2.*">
<s:layout>
    <s:HorizontalLayout paddingLeft="10" paddingTop="10"/>
</s:layout>
<fx:Style>
    @namespace comp1 "comp1.*";
    @namespace comp2 "comp2.*";
    comp1|ParentButtonClassOne comp1|CustomButton {
      color: red;
    comp2|ParentButtonClassTwo comp2|CustomButton {
      color: blue;
</fx:Style>
<comp1:CustomButton label="Button One"/>
<comp2:CustomButton label="Button Two"/>
</s:Application>
--------- comp1.ParentButtonClassOne.as ------
package comp1
import spark.components.Button;
public class ParentButtonClassOne extends Button{}
--------- comp1.CustomButton.as ------
package comp1
import spark.components.Button;
public class CustomButton extends Button{}
--------- comp2.ParentButtonClassTwo.as ------
package comp2
import spark.components.Button;
public class ParentButtonClassTwo extends Button{}
--------- comp2.CustomButton.as ------
package comp2
import spark.components.Button;
public class CustomButton extends Button{}

Doesn't "comp2|ParentButtonClassTwo comp2|CustomButton" mean that this style will only be applied to CustomButtons inside of a ParentButtonClassTwo? From the code sample here it looks like that isn't the case.

Dymanic action with jQuery selector not working in version 4.2.2

Hi,
We’re in the process upgrading to APEX version 4.2.2. We have an issue is with a report with a link that’s firing a dynamic action with a jQuery selector.
The first sequence in the dynamic action is Confirm. When we click the link in the report it’s supposed to popup a confirm “Are you sure you want to save?"
When we click the link nothing happens. This works in our current version 4.0.1, but not in 4.2.2. Do you have any ideas?
Thanks,
Joe

change the
in the url to
javascript:void(0);
The reason for your issue is that the default action of the anchor tag is not prevented and thus navigation occurs. A confirm action will return true or false, and execution of further true actions will stop when selecting cancel but this will still not prevent the default action from occuring. Similarly a cancel event true action is not adequete as this has to be run after the confirm so not accounting for the execution-stopping cancel of the confirm.
That javascript in the url is some good ol' "hack". It'll run that javascript instead of performing a navigation and void(0) just does nothing, and the click dynamic action will be unaffected.

File repository Content Selectors not working

Hi,
I am using Weblogic Portal 10 with a file a file repository. When I add content using the admin console (for example an image of type image), I am able to view it. The file is also added to the file system. But for some reason the content selector is not able to retrieve it. Is there something obvious I am missing?

Doing a local deployment to the server on my laptop, I found that I could recreate this if doing a deployment with the application in .ear format. Deploying from workshop, the application did not seem to have any issues. Did a successful deployment to the Test server this morning deploying with the .ear file in exploded format. Things seem to be working well.
I think that we will change our deployment process to do deployments with the exploded .ear file. If anyone has run into issues with this type of deployment it would be interesting to hear. Closing the thread.

Tag selector not working in DW CS6 project

Hi.
I'm using DW CS6 on a Mac. I'm working on a new web project, which is an HTML template. I'm in Design view and want to use the tag selector to select a tag, but whenever I try to select a child tag in the path, the only element selected is the page wrapper, which is the tag just following the body tag.
There may be 10 tags in the tag selector path, but whichever tag I select, DW keeps selecting the page wrapper tag.
If I open other web projects in DW, the tag selector works correctly. Just not in this new project/template.
Any idea why the tag selector wouldn't work in this particular template? Any idea how I can get it to work correctly?
Thank you,
Ron

The template is available in both boxed and wide version. The wide version doesn't have the "page wrapper" div, and the tag selector works fine. It's just in the "boxed" version, which has the page wrapper, that the tag selector doesn't work correctly.
It's not a big deal. I can use the wide version.
Just thought maybe someone here might have heard of this before.

Shortcut to toggle windows not working right

Safari Version 5.1.7 (6534.57.2); OS 10.6.8
When I employ the Command-tilde shortcut to toggle windows in Safari, it only cycles among two or three open windows. In other words, it does not bring to the front any other open windows that I want to view. For example, right now I have 4 windows open and it cycles through 3 of them but I have to manually choose the fourth from the Window menu. I just opened a fifth window and it still only toggles among the same three that were already open, but not the fourth or the fifth. I checked Safari Prefs and cannot find anything related to this. Any ideas how to fix or adjust this?

Hi-
The last time I saw a similar problem to yours, he was also running Panther. I advised reinstalling the 10.3.9 combo update, and his woes were gone.
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
Another thought is to check System Preferences/CD's & DVD'S, and check your selection nuder "When you insert a blank CD" (or DVD).
Running Disk Utility from the install disk, and repairing permissions is also another possible fix.
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

Mobile Link Toggle Button not working

I have tried several times to enable the mobile link and the toggle switch will not allow me to log in or enable.
I have DC on my ipad for when out of the office but on my MacBook Pro I cannot enable the feature. Please advise how to...

Are you connected to the internet when you try to switch ON/OFF the MobileLink toggle? Do you get any error message when you try to enable it? What application do you have - Reader or Acrobat? Language - English or any other?
Thanks,
-Amboo

In-app vibrate toggle does not work

Issue: Everytime I get a message on either of the messaging apps like WhatsApp or Hike messenger or Google Hangouts, the phone rings, vibrates and the screen comes on.
What I want: Everytime I get a message, I just want the phone to ring. I dont want the screen to turn on, nor do I need the phone to vibrate.
What I have tried: In each application, I have disabled the 'In-app Vibration' and it has not done what it was supposed to. The only thing that worked the way I wanted was iMessage. Under Sounds, I set the vibrate to NONE for text message. So, none of the third party apps notify me the way I want it to.
I have spoken to Apple support over the phone and I was asked to get in touch with each of the application developers, which I found ridiculous and wouldn't waste so much time on it.
I was wondering if anyone here can help me with this.
Thanks.

NOBODY??!!

Why does 'Switch to Fluid Grid View' toggle button not working?

I don't see the grids in the Fluid Grid Layout and nothing happens this button's On/Off stages.
Also getting an error 'Could not find Dreamweaver Fluid Grid style sheet.' when inserting any element as Fluid Element.
Please help, thanks.

@Binson: I'm following your post on another thread too.
Anyway, FG elements can only be inserted into FG Layout documents.
On FG Layout page if you're getting that error, you probably have some file integrity issues and DW is unable to locate your FG stylesheet.

Toshiba Front Operation Panel/Illumination Keys not working

I am unable to toggle wireless on/off, mute/unmute, play/pause using Front operation panel LED keys on my Toshiba Qosmio F60. Currently I need to enable WiFi/Bluetooth from within Windows for it to work. Fn+F8 toggle works as soft block/unblock only if I have already enabled WiFi under Windows. Any ideas as how this can be done? The only LED Touch button that works under Debian/Ubuntu/Fedora is the Volume Up/Down button. Touchpad on/off toggle does not work with physical button above the touchpad or Fn+F9 either. Other Fn+ keys work eg., Fn+Esc for mute/unmute, Fn+F1 for lock etc.
Interestingly even when the WiFi is turned off from within Windows on booting Arch with a pen-drive wifi-menu command detects all surrounding wireless networks properly for the first time. Even rfkill shows as hardware unblocked. But once a network is selected it fails and the subsequent rfkill commands show as hardware blocked.
These problems seems related to Direct App Launch Button which probably can be solved in Linux by quickstart http://quickstart.sourceforge.net/
I had raised a thread in Ubuntu, Debian, Red Hat forums as well
http://ubuntuforums.org/showthread.php?t=2150307
http://forums.debian.net/viewtopic.php?f=5&t=108921
https://bugzilla.redhat.com/show_bug.cgi?id=1074504
https://bugzilla.kernel.org/show_bug.cgi?id=72711
The buttons look like this http://www.manualslib.com/manual/180150 … 159#manual
Last edited by solomonsunder (2014-04-21 11:26:16)

I get the below output when I run showkey -k
Fn+1 (Zoom In)
keycode 419 press
keycode 419 release
Fn+2 (Zoom out)
keycode 418 press
keycode 418 release
Fn+Space (Zoom)
keycode 420 press
keycode 420 release
Fn+F8 (Wireless Toggle)
keycode 238 press
keycode 238 release
Fn+F9 (Touchpad Toggle)
keycode 530 press
keycode 530 press
These are soft keys mentioned here http://www.manualslib.com/manual/180150 … 134#manual
The front panel buttons and the small physical touchpad toggle button above the touchpad do not generate any codes. The Fn+F8 is a multi toggle in Windows after wireless is turned on through the front panel button (first press WiFi on, second press Bluetooth on, third press both WiFI, Bluetooth on, fourth press both off). Also there is no ouput for scancodes when I run showkey -s or xev. Am I missing anything?
Last edited by solomonsunder (2014-04-22 13:22:22)

Outlook 2003 Recipent Selection Not working on Word created emails

I have a user who when using word as his default editor, can see previously emails contacts but cannot select them. Selecting them just causes the select box to dissapear leaving the characters in the textbox.
He's set his default editor as outlook but the problem there is when he's typing long emails in a rich text format only the initial draft is sent rather than the entire email. I've read that changing the editor to word is a fix but with recipent selector
not working his outlook is pretty un-usable.
Anyone seen this before? He's running on windows 8.1 with office 2003.

Hello,
What's the difference between the permissions?
Can the users receive emails from OWA?
In addition, please make sure your Outlook 2007 has installed the latest update. And try to use
outlook/cleanips and check if it helps. See:
http://support.microsoft.com/kb/968773/en-us
Best Regards,
Steve Fan
TechNet Community Support

Re: After System-Recovery the Secondary Display (Beamer) will not work

Hello,
i had a problem with my Thosiba Notebook ! (Detail of System Name follows ... later)
First i saw that the Yahama Sound Chip was diabled (disapper) caused by Windows Update and i
found no way to recover / install the correct driver.
So i decided to ... give up with timewasting and Started the System Recover Process.
So after the Recover finish ... the sound was back and during the (Windows) Updating routine
... it' was disabled again, but this time i could install the new correct driver.
After i take back my installed notebock back to work (sound still working) i connect a beamer
to the secondary vga connection ... and what a suprise
the beamer shows NOTHING ... before this it still works
Has anyone a idea what could be the error reason ?
My System runs XP Home (recoverd and update to SP3)
The VAG is a GeForce G 400 (installed the driver from CD-Rom)
... i could not download the newest vga driver .. because it had an temp. problem with the Webaccess
... ... i look for the rigt ip-setup (just for info you)
If you need more details please ask ... i'll answer so good i can
Thanks to all how read this (and hopeful help me out)
This post comes from Germany ... you could replay in english !

The reason why i post the model name later , is that i'm now at home , the notebook is at work.
Yes, i do the monitor selection by pressing FN + F5 ... this what make me confuse
before the recovery it works , that display switch correct between int. LCD, CRT (Beamer) or LCD+CRT.
but now the toggle did not work, but the vga driver should almost the same as before (i see no different)
... for understanding .. when i do toggle i see on LCD the option windows wich monitor i want (i mean the pop-up)
but the beamer does not start correctly the display.
I'll try to put a new driver (form the support download site) on the system .... but i believe it should already works with
the driver it has now , the new driver will give me just a bit better performance , right !?
Another thing i forgot (but is a secondary problem) is that when i want to see a DVD at the laptop
and i'll show it with the beamer it works only when i switch to CRT (Beamer) only , if i do not
the DVD shows only on LCD correct if both are active i see on CRT only a black display window where
the DVD should appear ... i can live with that, but it seems not normal ... the manual or FAQ's don't say anything about it ..

"Number of bands" toggle not working

A few of us on this board have noticed that when using the Apple AuGraphic equalizer that the "number of bands" toggle at the bottom of the viewer that switches it from 31 to 10 bands does not seem to work. It remains 31 bands no matter what.
Has anyone else experienced that? Is it a bug or are we missing something?
Thanks

I wanted to ask here first to see if I was doing something wrong before I reported it.
Did you happen to see my other thread also about the Apple Eq? In addition to the "number of bands" toggle not working, I can't get the eq to have any effect on audio clips. Could these things be related?

Some toggles not working in Inspector

Hi,
I'm running FCPX 10.1.3 & OS 10.9.5 and some of Final Cut Pro X's toggles in the Inspector are not working after this last update of FCPX.
Some when clicked only briefly display Show/Hide but never expand nor collapse.
The same thing happens with some of the triangles in the Inspector. The triangle pivots but nothing expands nor collapses.
I have used Digital Rebellion's Pro Suite and removed FCPX completely and installed from scratch.
I have repaired the disc permissions. Rebooted several times.
I have made another admin user account and it's doing it when logged into that account as well.
Has anyone had a similar issue and/or a possible solution?
Thank you!
-Doren

Uninstall Adobe Reader's plug-in.
Remove the following two files from /Library/Internet Plug-Ins/:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Open Safari Preferences > Extensions. Do you see AdobePDFViewer? If yes. disable.
Log out/in and test.
Another option is to download and install this plugin. Schubert|it PDF Browser Plugin . PDF Browser Plugin 2 is free for not-for-profit activities if used at home or at educational institutions.
http://www.schubert-it.com/pluginpdf/

Toggle selector not working...

Similar Messages

Maybe you are looking for