Tomcat 4.1.12 - Manager App Configuration & Output to Console on W2K?

Hi
i just upgraded to Tomcat 4.1.12 for Tomcat 4.0.4 in w2k. Not i have to problems (worked before):
- On the new version i can't get the Manager Application running. In the documentation i rad about two ways to install the Manager Application but none of them worked (deploying the manager.xml or installing the manager app in server.xml). Unlike the old tomcat version 4.0.4 in the new version the manager dir is not under webapps but under a new dir called servler/webapps. Any Suggestions?
- Unlike in the Tomcat 4.0.4 version 4.1.12 doesn't output the System.out.println() command to console for all calls of that methode that are in init() methode of the servlet (but in the tomcat logfile the System.out.prinln commands are logged). As soon as the servlet is initialized the System.out.println() is printed to the console again. I read about that tag to redirect the System.out und System.err to the log file and i deactivated that for my servlet but this didn't help. Any suggestions?
Thanks for your help.
Josh

I can't remember what i've done excatly, i just remeber that i was wrong and the manager app doesn't have to be installed since it comes in an installed state in the tomcat distribution. Only thing i had to do is to set up a user account with manager or admin priviledge. This can be done somewhere in the conf/ dir if i remember right.

Similar Messages

  • Managed App Configuration using Profile Manager

    Hello,
    We're using Profile Manager as the MDM server of our iPads. Everything works fine except that recently we want to manage some app configurations through MDM, but were unable to find the Managed App Configuration settings from Profile Manager.
    May I know if Profile Manager supports Managed App Configuration for iOS?
    Thanks,
    Jacky

    We are not running it yet but I am believe that when you setup a user in airwatch or another MDM and you install the agent on a device the user has to authenticate with AD creds, so then you can configure it to pull a cert from your SCEP server using those creds and it will then pull a user cert. instead of a generic certificate. Obviously that is a pretty dumbed down explination but in a nutshell that is how it is going to work.

  • Does Profile Manager support iOS7's Managed App Config and App Feedback?

    WWDC 2013 talk 301 mentions that iOS7 now supports pushing of app config plists and returning app feedback via new MDM commands.
    Does anyone know if Profile Manager supports this or is it only for MDM vendors?
    Apples POC app is on the developer web site here: Managed App Configuration
    The proejcts readme.txt says this:
    * The MDM server must support the ApplicationConfiguration setting and ManagedApplicationFeedback commands
    I see other iOS7 specific config profile settings but for the life of me can't find anything on this topic!

    At the moment seems that Profile Manager included in OSX Server 3.0 do not supports these features.
    I hope that will supports it through an upgrade because that could be super useful and I don't want to pay for another MDM provider and switch only for a single feature.

  • Oracle Apps 11i: Output Post Manager is down

    Hi Experts,
    I was working on Oracle application cloning 11i lately and after completing the clone, my conc. manager output post manager (OPP) is not coming up in target system.
    I  tried to fix the issue by running "cmclean.sql" and thn ran autoconfig on application node, but still the issue persists
    The logfile for FNDOPP(outout post manager) says:-
    [12/17/13 5:24:30 PM] [main] Starting GSF service with concurrent process id = 154919.
    [12/17/13 5:24:30 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
    [12/17/13 5:24:31 PM] [Thread-23] Service thread starting up.
    [12/17/13 5:24:31 PM] [Thread-24] Service thread starting up.
    [12/17/13 6:52:55 PM] [GSMServiceController:154919] Received shutdown request.
    [12/17/13 6:52:55 PM] [GSMServiceController:154919] Preparing to shutdown service.
    [12/17/13 6:52:55 PM] [GSMServiceController:154919] Stopping all Service Threads.
    [12/17/13 6:52:55 PM] [OPPServiceThread1] Preparing to shut down service thread.
    [12/17/13 6:52:55 PM] [OPPServiceThread0] Preparing to shut down service thread.
    [12/17/13 6:53:55 PM] [OPPServiceThread0] Service thread has shutdown.
    [12/17/13 6:54:00 PM] [OPPServiceThread1] Service thread has shutdown.
    [12/17/13 6:54:00 PM] [GSMServiceController:154919] All Service Threads have completed.
    [12/17/13 6:54:00 PM] [GSMServiceController:154919] Service has shut down.
    FYI, The below metalink note did not help
    Concurrent Processing - R12 Output Post Processor Service Not Coming Up. (Doc ID 460578.1)
    Can anyone help me to fix the issue? Your assistance will be highly appreciated.
    DB version: 11.2.0.3
    EBS Version: 11.5.10.2
    Platform: 2.6.39-300.17.3.el5uek (Linux)

    Thanks for replying Asif.
    In ICM log file, I see occurrence of these error messages in bulk.It looks Mangers are wrongly defined or fnd_nodes having some incorrect values.
    Do I have to perform the application clone again or is there any another way to fix it.
    Process monitor session started : 17-DEC-2013 21:29:02
    Could not find service instance context for service instance number 1072
    Could not find service instance context for service instance number 1092
    Could not find service instance context for service instance number 1089
    Could not find service instance context for service instance number 1090
    Could not find service instance context for service instance number 1091
    Could not find service instance context for service instance number 1043
    1. Output of the first query
    Concurrent Manager's Name                 
    TARGET Processes ACTUAL Processes
    Conflict Resolution Manager                              
    1           
    1
    Internal Manager                                         
    1           
    1
    Scheduler/Prereleaser Manager                            
    1           
    1
    Standard Manager                                        
    20          
    20
    PO Document Approval Manager                             
    3           
    3
    Receiving Transaction Manager                            
    5           
    5
    PA Streamline Manager                                    
    0           
    0
    Inventory Manager                                        
    2           
    2
    INV Remote Procedure Manager                             
    5           
    5
    SFM Controller Service                                   
    0           
    0
    SFM Order Queue Service                                  
    0           
    0
    Concurrent Manager's Name                 
    TARGET Processes ACTUAL Processes
    SFM Work Item Queue Service                              
    0           
    0
    SFM Fulfillment Actions Queue Service                    
    0           
    0
    SFM Fulfillment Element Ready Queue Service              
    0           
    0
    SFM Event Manager Queue Service                          
    0           
    0
    SFM Inbound Messages Queue Service                       
    0           
    0
    SFM Timer Queue Service                                  
    0           
    0
    SFM Application Monitoring Service                       
    0           
    0
    SFM SM Interface Test Service                            
    0           
    0
    Session History Cleanup                                  
    1           
    1
    C AQCART Service                                         
    1           
    0
    Marketing Data Mining Manager                            
    5           
    5
    Concurrent Manager's Name                 
    TARGET Processes ACTUAL Processes
    Workflow Document Web Services Service                   
    1           
    0
    UWQ Worklist Items Release for Crashed session           
    1           
    1
    WMS Task Archiving Manager                               
    2           
    2
    OAM Metrics Collection Manager                           
    1           
    1
    Workflow Agent Listener Service                          
    1           
    0
    Workflow Mailer Service                                  
    1           
    0
    Transportation Manager                                  
    10          
    10
    Output Post Processor                                    
    1           
    0
    2. Output of 2nd query
    SQL> select CONCURRENT_QUEUE_NAME, TARGET_NODE from fnd_concurrent_queues;
    CONCURRENT_QUEUE_NAME          TARGET_NODE
    FNDCRM                         GDDEVAP1
    FNDICM                         GDDEVAP1
    FNDSCH                         GDDEVAP1
    FNDTMTST
    STANDARD                       GDDEVAP1
    PODAMGR                        GDDEVAP1
    RCVOLTM                        GDDEVAP1
    ARTAXMGR
    PASMGR
    OKCCONCMGR                     GDDEVAP1
    INVMGR                         GDDEVAP1
    CONCURRENT_QUEUE_NAME          TARGET_NODE
    INVTMRPM                       GDDEVAP1
    MRPMGR                         GDDEVAP1
    CRPINQMGR                      ORACLE
    IEXCONMGR                      ORACLE
    XDP_CTRL_SVC
    XDP_Q_ORDER_SVC
    XDP_Q_WI_SVC
    XDP_Q_FA_SVC
    XDP_Q_FE_READY_SVC
    XDP_Q_EVENT_SVC
    XDP_Q_IN_MSG_SVC
    CONCURRENT_QUEUE_NAME          TARGET_NODE
    XDP_Q_TIMER_SVC
    XDP_APPL_SVC
    XDP_SMIT_SVC
    WFMGSMD
    MET_CL_gddevap1_9160
    MET_SRV_gddevap1_9260
    OAMGCS_192.168.2.22
    OAMGCS_GDDEVAP1
    FNDSM_GDDEVAP1                 GDDEVAP1
    FNDIM_GDDEVAP1
    APACHE_gddevap1_8060
    CONCURRENT_QUEUE_NAME          TARGET_NODE
    FORMS_gddevap1_9060
    XDP_MANAGER                    GDDEVAP1
    REPORTS_gddevap1_7060
    IEU_SH_CS                      GDDEVAP1
    WFMGSMS
    C_AQCT_SVC                     ORACLE
    AMSDMIN                        GDDEVAP1
    WFWSSVC                        ORACLE
    IEU_WL_CS                      GDDEVAP1
    WMSTAMGR                       GDDEVAP1
    Debug_Service                  ORACLE
    CONCURRENT_QUEUE_NAME          TARGET_NODE
    MWA001
    OAMCOLMGR                      GDDEVAP1
    WFALSNRSVC                     ORACLE
    WFMLRSVC                       ORACLE
    FTE_TXN_MANAGER                GDDEVAP1
    FNDCPOPP                       ORACLE

  • Managing and configuring log files for Oracle 9ias

    Hi all,
    I'm wondering where I can find documentation on managing and configuring log files like:
    ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/*
    ORACLE_HOME/dcm/logs/*
    ORACLE_HOME/ldap/log/*
    ORACLE_HOME/opmn/logs/*
    ORACLE_HOME/sysman/log/*
    ORACLE_HOME/j2ee/ OC4J_instance/log/*/* ORACLE_HOME/config/schemaload.log ORACLE_HOME/config/useinfratool.log
    because I didn't find anything in document like:
    Oracle9 i Application Server
    Administrator�s Guide
    Release 2 (9.0.2)
    May 2002
    Part No. A92171-02
    So, if anyone has any idea...
    Thanks in advance

    Does anyone know how or if it is possible to send the stdout and/or stderr to the log4j type of logging? I already capture the stdout and stderr to the flat file. But I would like to timestamp every line to compare and diagnose problems with each application that encounters problems. Each web app is using log4j to their own application log4j log file. When they encounter errors or resource draining problems, I would like to see the container logs and see what was occuring inside the container at around that same time.
    Any ideas?

  • My 2nd gen iPad woke up today and decided to load all 800  apps, I've reset,restored and still the minute I connect wifi it's off to the races. It is set to manually manage apps. Are there any suggestions?

    My 2nd generation iPad woke this morning and decided to load all of my apps 800+ and I don't seem able tp prevent it. It is set to manually manage apps and I have reset, restored and the minute I reconnect with wifi it starts loading. Any suggestions out there on how to correct this?

    @chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
    I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
    The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
    However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
    ...the other folders did copy okay though!
    It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
    @ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
    @alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
    Thanks for the help!
    (pre-post) UPDATE >>> I've just mounted my Windows partition  in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

  • Time management app that locks applications about certain amount of time?

    Hey guys,
    Not sure which community I should be asking this in, but here goes...
    I'm looking for a time management app - similar to RescueTime - but one where I could set a time limit on how many hours a day a certain application is allowed to run, and after that time limit, it would be locked down (note - not between what hours, but how much total time!).
    I've seen similar applications specifically for certain web addresses, it seems so unlikely that an application equivalent doesn't exist!
    Any help would be really appreciated.

    Have you considered setting up Parental Controls for that user account?
    OS X Mavericks: Set up parental controls
    OS X Mountain Lion: Set up parental controls
    MacWorld: Configuring Parental Controls
    Limit Application Usage in OS X with Parental Controls

  • How to install managed apps to iPads silently OTA using Profile Manager

    Here is my setup.
    100 to 150 Ipads in carts used by their departments in classrooms.
    OSX Mavericks Server running Profile manager
    I use Apple Configurator to push a wifi payload to the ipads as well as an auto enrollment profile to connect to Profile Manager.
    That part works like a dream.
    Now that I have that working. I am having a problem pushing apps to the Ipads. I downloaded some free apps, GDrive for example, using the managed distribution.
    But I cannot figure out how to push the apps to the iPads without having the iPads asking for an Apple ID and password.
    I just want to push VPP apps to the iPads silently.
    Thanks for any help.

    Then you need include the apps when you clone with Configurator.
    Managed Distribution of Apps is flexible because it works for the following scenarios:
    Device
         • Device is owned by the company and distributed to the user
         • Device is BYOD and enrolled in corporate MDM
         • Device is BYOD and unmanaged
    User
         • Device is "assigned' or used by a single individual
         • The individual has an Apple ID (or is capable of getting one)
         • The user is entered into your Profile Manager and has an email address (or device is enrolled and you do a push notify to ask for enrollment - remember, Managed Distro works without MDM)
         • User accepts the invitation to your VPP program with an Apple ID of choice - enterprise does not care what it is
    Apps
         • Apps are assigned to the user account in Profile Manager
         • Apps become visible in the Apple ID's App Store account as available for install
         • If the device is set to autoinstall "purchased" apps, the apps for iPad will just appear
         • Apps can be "revoked" by the enterprise, returning the license to the available pool
         • Apps do not dissapear from devices
    Managed Distro does not really fit education as depending on age your students may not be able to have an Apple ID, may not have email, and the devices may not be deployed in a one-to-one. 
    You are back to master image cloning through Configurator.
    R-
    Apple Consultants Network
    Apple Professional Services
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

  • Get Acrobat to Login to Adminui vs. Rights Management App

    I am using Rights Management on LiveCycle 8.2 and managing my users in ES. A problem I am encountering is that certain operations, like revoking documents launch the URL to have the user login to the Rights Management app. But since my users aren't configured there, the logins do not work.
    Is there a way to reconfigure either Acrobat or the Rights Management App to redirect appropriately?

    Apparently not with respect to Rights Management. I have been told that this was deliberately designed this way and has to do with Policy Server being a stand alone product at some point.
    The User store for LiveCycle isn't shared with the legacy Policy Server application and that is the URL that the native applications (such as Acrobat or the Office RM Extensions) direct to from certain menu options. The URL format is as follows : http://localhost:8443/edc? Etc.  That application seems to use a separate store altogether as I can not even log in using my administrator credentials.
    Ryan M. Jacobs
    614.266.3663
    [email protected]

  • Some videos are semi-missing - they do not show up in File Manager apps or another app

    I have what I will call three FILER apps: File Browser, Air Browser and File Commander.  I also have MovieSRTPlayer.  Those apps appear to not register the presence of some video files that I have definitely copied to my PB.  The MovieSRTPlayer will overlay a .srt file's text over a video allowing the pb to show subtitles.  It works as long as it can find the video and srt files.
    I am definitely transferring a series of video files to the pb's video folder.  I am also transferring a companion file to that folder.  The companion file is a subtitle file in the form of an .SRT file.
    THREE file manager type apps do NOT show those files as present in the video folder.  The Video app itself does show and play those video files. 
    I have copied the files using both wifi-sharing and when they did not show up that way, I copied them using the usb cable to the pb's Z: drive and the video folder.
    As stated the dam! files play in the video app.  But they do not appear in the various filer apps.  And they also do not show in another app, one that will display the subtitle (.srt file) file overlaying the video.  In all instances it is as if the pb does not register the presence of those files on the pb.
    Now, what is interesting is that when this first cropped up, 7 files were missing - just a mix of video (no .srt files involved).  That is they showed in the video app and played but the filer programs did not show them.  I managed last night and this morning to get 7 of those to finally show by copying/moving/deleting and recopying.  But now I'm running into this brick wall again.  I have repeatedly copied two video (avi files) and their companion .srt files to the video folder.  They are in that folder (I've looked using usb and wifi-sharing) and they play in the PB's video app.  They are most certainly on my pb.
    Oh, and yes, I've rebooted a number of times. 
    Ideas?

    I have what I call 3 file manager apps.  File Browser, Air Browser and File Commander (the older free version). 
    They all show or don't show the same thing.  So files are missing.  And SIZE is not the sole determining factor.  When I was testing MovieSRT and "lost" some files I copied and renamed avi and .srt files.  So there are two extra .srt files in the Video folder.  But while they are 32kb (kilobytes) and 58kb respectively, they do NOT show up in the File managers.  The other two identical files with the names matching the .avi files do show up.  The one very large mp4 (2gb) does not show up.  A subfolder I created just as a test does not show up.  But the large mp4 and subfolder were showing up while I was actively copying the 2gb file - they would show up as the file was being copied - the filemanagers showed the file getting larger and larger and while doing so the "missing" subfolder also kept showing up.  Then once the large file was completely copied, both it and the subfolder "disappeared" - again, the large mp4 does show in the Video app and it plays.
    My persistence probably is based on the fact I was a computer programmer many eons ago!  Also, I was trying to get YOUR app to work and the avi files were not showing up in your listing but they were showing and playing in Video app (but no subtitles).  Finally, after copying/moving/re-copying over and over including moving and copying to the PB's Print folder (just since it was empty) and copying it back to the video folder (now 2 copies), the files would finally show up.  Peculiar - yup!
    Oh, one other thing - the 3 file managers all show what I will call the virtual Playbook-Demo video in their listings - your app does NOT show it.  Obviously, it is not located in the Video Folder but somewhere in the bowels of the PB.  So, the filemanagers  are relying on some "file structure" that is not fully correct.  But your app does not appear to show it.

  • Looking for a good Password Manager App for the iPhone

    I'm looking for a good and reliable Password Manager App for the iPhone with sync capabilities on macs. I've read several reviews on several different apps on iTunes, and either they don't work properly, or they're a rip off, or they just don't sync or all of the above. Any recommendations?
    Thanks in advance.

    I've been very happy with 1Password, though I haven't used the iPhone component (not having an iPhone).
    Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Discussions. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. No animals were harmed in the making of this post.

  • HT1535 I am trying to manually manage apps on my new iPad.

    I am trying to manually manage apps on my new iPad 3.  My daughter has over 500 apps on her iPad.  We share an iTunes login id.  Her apps are getting loaded on my iPad and are in "waiting" status.  I deleted them numerous times, but they appear as "installing" in purchases in app store.
    I want to be able to download a very small subset of the apps from my daughters iPad to mine, but many are stuck in the "installing" state.  I now have iTunes on my desktop set to manually manage my apps (sync apps is unchecked) but when I first plugged my iPad into the desktop via USB, I think iTunes automatically synced al of my daughter's apps to my iPad.
    I know how to download the apps I want from the cloud via Purchases in app store, but how can I get the apps out of "installing" state??

    If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

  • I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

    I can not make a "Byte Code Adapter Installation"
    When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
    Please help to resolve a number of questions that might help me complete the setup :
    1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
    I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
    2 . Why Server Node is empty detail settings ?
    JDK Location: 
    Enterprise Manager Host: 
    Enterprise Manager Port: 
    Introscope Agent Name: 
    Introscope Agent Profile: 
    Autoprobe Directives: 
    Wily Version: 
    Introscope Agent Version: 
    Introscope Agent Log Location:
    3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
    And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
    Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
    there is such an item:
    2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
    However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

    The problem was resolved a small manipulation - on stage Basic Configuration,
    point 3 "Configure CA Introscope"
    I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
    Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
    Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

  • Understanding and using Logical Components for Managed System configuration

    Experts.....
    I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System.  Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
    General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component.  I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B.  This seems wrong to me?
    I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
    - Our SAP landscape is not very complex
    1. only ERP and EP (Dev/Test/Prod). 
    2. We are utilizing HR Self Service (XSS).
    3. The ERP ABAP systems are on Netweaver 7.01. 
    4. EhP4 has been installed, however we only activated the HCM business functions.  Therefore SAP_HR is on 604 whereas SAP_APPL is on 600.  I think this might be driving some of the confusion in SMSY
    For the DEV ABAP system I am trying to configure:
    1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
    2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
    3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default.  I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
    4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
    5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
    From what I can tell, I think this is correct:
    1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
    2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
    3. For the Solutions, my plan is to create
    a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
    b. Production ERP with the prod erp/ep systems only
    Thanks for any advice/guidance to help me avoid future problems!!
    Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

    General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
    Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
    For example with ChaRM you could have 2 logical components.
    ZCHARM_DEV development (100) -> QA (200) -> prod (300)
    ZCHARM_SEC security (900) -> QA (200) -> prod(300)
    One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
    Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

  • Solution Manager Charm configuration

    Hi @all,
    I´am using SAP Solution Manager 7.0 SP 15. Configurated all Charm Steps successfully.
    The SAP Solutoin Manager - Scenario- Specific Settings - Change Management - Extended Configuration -Checks - Execute Check Report is green
    I can´t open any hance cycle in solar_project_admin - System Landscape - Change Requests , Create Task List, I get the result "project is not released. hance cycle can not be created".
    If i click "check", there are three errors:
    Message from function module /TMWFLOW/CALC_SINGLE_TRACK: No source system
    (Message no. /TMWFLOW/TRACK_N103)
    No track for project DF_WART_01 with log. system A36/200
    (Message no. /TMWFLOW/CM_CHECK038)
    CTS projects in production systems for project DF_WART_01
    (Message no. /TMWFLOW/TASKLIST190)
    System change options are empty.
    In my authorized Change Requests - related documents (next document). i get "there are no actions in the Worklist"
    i´ve no idea where my fault is. I hope you can help me.
    Please suggest.
    Best Regards
    Daniel

    Now I have created a new maintenance project, I´ve configured everything, when I check it, I get two errors:
    No consolidation system found for A36-200 (project DF_SOLMAN1)
    Message no. /TMWFLOW/TRACK_N806
    No track for project DF_SOLMAN1 with log. system A36/200
    Message no. /TMWFLOW/CM_CHECK038
    I noticed that this thread is pretty old already but I bumped into similar error messages and in the end it was caused by a TMS route configuration that didn't match the configuration of the logical component that was in use.
    You can pretty easily verify this through SMSY. Navigate to your logical component there, select the line of the system assignment and click on Shipment Routes button. If you get an empty screen back, then your TMS transport route configuration doesn't match your logical component configuration.
    For example, you've got DEV 100 - DEV 200 - PRD 100 for a CHARM demo landscape. If your TMS transport route configuration matches this but your logical component has DEV 100 assigned as Quality Assurance, then your configuration check for CHARM will fail because there is a mismatch.
    When your configuration is correct, so both your TMS transport route as your Logical Component (system role assignment), then you should get a transport route configuration back (visible) after clicking Shipment Routes.

Maybe you are looking for