Tomorrow I will get my 3rd ipad2 due to light leakage!

I'll let you guys know how it works out, I will try a different store this time. I am a little mad about this issue.....

Look..in the scheme of important things in life, especially with all that is happening in Japan as I type this, the light leakage is no big deal....BUT..
Having spent over $1100.00 on my iPad 2 with all accessories and apple care, tax etc and replacing my original iPad that I had no issues with and having light leakage around the edges of the new one ... This is a situation that's not acceptable...especially with such a high ticket item...
If all of my LCD display tv's and pc monitors had this issue it would be a problem...
Apple needs to and most certainly will take care of this issue....Foxconn will have to eat a lot of displays I will tell you that...

Similar Messages

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name:             APPCRASH
Application Name:                  iTunes.exe
Application Version:               10.4.0.80
Application Timestamp:          4e262cfr
Fault Module Name:               QuickTime.qts
Fault Module Version:             7.70.80.34
Exception Code:                     c0000005
Exception Offset:                    00146b30
OS Version                                                            1033
Locale ID:
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information4:          0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.

Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

I received LR 5 for Christmas but have not downloaded it yet on my computer. I have had LR 3 for about 4 years. I am due to buy a new computer soon but need to know how many licenses/downloads I will get before downloading LR 5 on my current computer. I

I received LR 5 for Christmas but have not downloaded it yet on my computer. I have had LR 3 for about 4 years. I am due to buy a new computer soon but need to know how many licenses/downloads I will get before downloading LR 5 on my current computer. I may also purchase a laptop in the next year so that would require 3 licenses altogether (current iMac, future iMac, future macbook).

You have one license.
You can download and install it on an infinite number of computers, as long as it is only installed on two of your computers at any one time, and in use on only one computer at any given time.
So in your case, current iMac, that's would mean its installed on one computer, no problem. Future iMac and future MacBook ... so if you uninstall from current iMac and install on Future iMac and future MacBook, it's now installed on two computers at a time, no problem, as long as you're not using Lightroom on both simultaneously. And if after that, you got two new computers and uninstalled Lightroom from the previous two, you're still good, it's only installed on two computers at any one time.

HT1414 If i back up my phone due to the wifi option being grayed out it says to connect to itunes and reset my phone but everything will get deleted that wont happen if everything is in my icloud account correct

If i back up my phone due to the wifi option being grayed out it says to connect to itunes and reset my phone but everything will get deleted that wont happen if everything is in my icloud account correct

If Wi-Fi is greyed out, it is not possible to backup to iCloud.
If the device is backed up to iTunes and contacts, calendars, notes, etc are synced to a supported application or cloud service, and media and pictures are on the computer, then a restore will not cause any data to be lost.

Getting error " Incomplete update due to error in single records"

Dear All,
We are loading data from DSO to Cube using full load and the load is failing giving an error message Collection in the source system ended and when checked the error message button it is showing as " Incomplete update due to error in single records" . and also one more message "Messages (type E) for data records with record number 0
Message no. RSM2714". Can any one tell us the reason for the failure of this load ? and how to resolve it ?.
When we click on the help button of the error message it is displaying the message as below
Incomplete update due to errors in single records --> Long text
Message no. RSM2712
Diagnosis
In the update rules, one InfoSource record was used to create several records in the data target. These records must be handled in the same way to enable tracking into the PSA and the treatment of errors in individual records.
In the previous case, one record was updated in this kind of group generated by update rules, whereas other records in the same group were rejected. If you updated the PSA data record again, the records that were already updated would be updated again. Duplicate records would appear in the data target and the data target would thus be inconsistent.
System Response
The data record with errors was highlighted in the PSA. However, no error request was generated.
Procedure
Delete the request in the data target and, after removing the error, update all records for the request to the data target again.
Regards,
JayaKrishna

hi,
Can you please check out the PSA error record and check this out in Source DSO as this load is for DSO -> Cube....
Please correct it in PSA if this is not correct as per DSO ....prior correcting data in PSA pls delete the request from Cube.....then it will allow to correct or delete record in PSA and then further push data from PSA to Target Cube...
If its correct as per DSO then run load in DSO sometime few records wrongly updated by end user and they correct it by evening for Submission....So u will get the corrected record and then run manually further load to Cube...
Hope this will help....
Regards,
Mahesh

I think If you are up...you will get your preorder

I have talked to several people that don't even have a clue that preorder is on the 3rd. They know its being released, but no clue about pre-order. It might seem like the iphone will sell out in 5 minutes, but that because everyone who posts on here is a crazed lunatic. Don't get me wrong people know about it, but there are a lot that are clueless to the preoder as well. I do think we will be fine. I AM ONE OF THE CRAZED IPHONE FANATICS:-)

walterkarroll wrote:
I have talked to several people that don't even have a clue that preorder is on the 3rd. They know its being released, but no clue about pre-order. It might seem like the iphone will sell out in 5 minutes, but that because everyone who posts on here is a crazed lunatic. Don't get me wrong people know about it, but there are a lot that are clueless to the preoder as well. I do think we will be fine. I AM ONE OF THE CRAZED IPHONE FANATICS:-)
Ya I heard when at&t iphone4 first came out it was like a record or something. That lasted all day too. I also hear like I said I hear could be rumors verizon is going to have more iphones than at&t when they first released the iphone4. I know that most of the people on these fourms will get it on the 3rd, but looking at all the post there are not that many people posting I noticed alot that it has been that same person. I think they will sell out on the 4th in my opinion. I know I will be on when we can get them just because i'm excited, but who knows how fast they will sell out. I have seen people say in 30 min. I highly doubt that but who know i guess were going to have to wait until the 3rd around noon to find out if people are still ordering.

When we will get the ipad 3 please

, when we will get the ipad 3 please
is it confirmed tomorrow will be the releasing day for the ipad 3 or not

The new iPad will likely be announced on March 7th. No one know when or where it will be released.

Is the VXI bus timing on an 870 using VIC the same as I will get from my application program ?

I have a 3rd party instrument that interferes with interrupts on modules in higher numbered slots. This instrument just passes the daisy chain along, but I suspect it is responding when it should not during an interrupt ack cycle. VIC interrupt ACK worked fine. Is the VXI bus timing fixed by the controller ? Is what I see on the bus with VIC what I will get using VISA calls?

In VISA, you use VISA Enable Event to configure VISA with what type of event to watch for (such as interrupts). Then use VISA Wait on Event to actually wait for the interrupt to be generated and then acknowledged. Finally, you use VISA Disable Event before ending the VISA session.
You will find tabs that correspond with these names in VISA Interactive Control. First use the Enable Event, select the event type and whether you want a queue or handler mechanism (I would suggest queue), and press Execute. Then go to the Wait on Event tab, set your timeout, and press Execute. As long as the interrupt occurs before the timeout period has elapsed, you will see the interrupt information returned. You can Execute Wait on Event numerous time
s and it will return the next interrupt in queue. Before closing the VISA window, Execute Disable Event.

HELP! I will get back my Windows 8!

Dear HP Support here my problem:
Two weeks ago i have upgraded Windows 8 to Windows 8.1 from the Microsoft Store, but i will get many lags and i can't play games...
I tried to restore HP minimal image but i can't access Recovery Menu, when i turn on my PC i press F11 and display shows "Please wait" and BLACK SCREEN !
I haven't created Windows 8 Recovery Discs... i'm disperate please help me i can't play loved games !!!
P.S: My Notebook Model is Pavilion g6-2324sl.
Thanks you again, bye!

Hi,
Get back to Windows 8 is a lenghthy task. I don't know why Microsoft's done this. You are not alone:
http://howto.cnet.com/8301-11310_39-57610729-285/how-to-uninstall-windows-8.1/
The following option may be a little bit late for you:
http://www.usatoday.com/story/tech/2013/11/10/windows-8-laptop-recovery/3476743/
Hope the following link helps:
http://www.makeuseof.com/tag/how-do-upgrade-to-windows-8-1-how-to-downgrade-back-to-windows-8/
Regards.
ps Just FYI, one of my machines crashed during Windows 8.1 upgrade and I had to rebuild it from Windows 7 (I upgraded it to Windows 8 and the Windows 8 upgrade DVD won't install w/o Windows 7). I won't touch to other two unless in few months times MS releases few "holes".
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My client current process shift amount is prorating.   Now my client requirement employee change shift (SE20321D)   to normal (NSO70012) in the mid of the month employee will get shift full amount,

Hi Experts,
Please help me to solve this two issues
I will give you clearly about my client requirement
in the current system (existing) already configured for shift allowance.
shift allowance for executive
Shift Allowance Rates
2 shift
3 shift
RM 240
RM 330
shift allowance for non executive
Shift Allowance Rates
Category 1
Category 2
2 shift
3 shift
2 shift
3 shift
RM 180
RM 280
RM 95
RM 130
they are not maintained (there is no any key)   in info type 0014 or info type 0015 they earliest hr consultant copied to the Shift Allowance wage types :- 5533, 5534,5535,5536,5537,5538and 5559
Note : 5533 & 5536 are for Payment.
Other wage types are for calculation purposes only.
And they modified (standard LAP9) YAP9 (copied) schema written pcr for shift allowance
The pcrs are YSH1,YSH2,YSH3,YSH4,YSH5,YSH6,YSH7,YSH8,AND YSHF
1) So my actual my client requirement (Issue 1)
    In my client current process shift amount is prorating.   Now my client requirement employee change shift (SE20321D)   to normal (NSO70012) in the mid of the month
employee will get shift full amount
2) client requirement (Issue 2)     Shift Allowance become prorate if the Action (Info type 0000) in the same month have changes. (Depand the action type)
Actions are
WA,WB,WC,WD,WE,WF,WG,WH,WI,WJ,WK,WL,WM,WN,WO,WP
XO,X1,X2,X3,X4,X5,X6,X7,X8,X9.
XA,XB,XC,XD,XE,XF,XG,XH,XI,XJ,XK,XL,XM,XN,XP,XQ,XR,XS,XT,XW,XX,XY,XZ.
Y0,Y1,Y2,Y3,Y4,Y5,Y6,Y7
YA,YB,YC,YD,YE,YF,YG,YH,YI,YJ,YK,YL,YM,YN,YP,YQ,YU,YV,YW,YX,YY,YZ
Z9,ZY
Example
in same month employee changed action on 20.07.2014
Kindly help me to solve this issues feel very happy for your help.and if you need any information about issue please let me know i will share to you.
Thank you
Raamarao

Try this, it works very well for me.
import XMonad.Hooks.ManageHelpers (composeOne, isFullscreen, isDialog, doFullFloat, doCenterFloat)
myManageHook = composeAll. concat $
[ [ className =? c --> doCenterFloat| c <- floats]
, [ resource =? r --> doIgnore | r <- ignore]
, [ resource =? "gecko" --> doF (W.shift "net") ]
, [ isFullscreen --> doFullFloat]
, [ isDialog --> doCenterFloat]]
where floats = ["sdlpal", "MPlayer", "Gimp", "qemu-system-x86_64", "Gnome-typing-monitor", "Vlc", "Dia", "DDMS", "Audacious", "Wine"]
ignore = []
myLayout = tall ||| Mirror tall||| Full ||| tab ||| float
where
tall = named "Tall" $ limitWindows 4 $ minimize $ Tall 1 (3/100) (1/2)
tab = named "Tab" simpleTabbedBottom
float = named "Float" simpleFloat
main = do
myStatusBarPipe <- spawnPipe myBar
conkyBarProc <- spawnPipe conkyBar
trayproc <- spawnPipe myTrayer
xmonad $ ewmh $ withUrgencyHook NoUrgencyHook $ defaultConfig {
terminal = "urxvt"
, manageHook = manageDocks <+> myManageHook <+> manageHook defaultConfig
Last edited by helloworld1 (2012-08-14 05:20:56)

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

Hi rhaughan,
I see that you have concerns about your operating temperature of your computer while using resource-heavy applications such as gaming applications. I have an article that will address some of the concerns you have mentioned:
Mac notebooks: Operating temperature - Apple Support
http://support.apple.com/en-is/HT201640
While there are third-party utilities that measure the temperature of a notebook computer, it is important to understand that these utilities are not measuring the external case temperature. The actual case temperature is much lower. Never use third-party applications to diagnose possible hardware issues—instead, contact Apple or go to an Apple Retail Store or Apple Authorized Service Provider.
You should also see this article for even further information about your fans:
Learn about the fans in your Mac - Apple Support
http://support.apple.com/en-is/HT202179
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

From which table i will get PO tax amont and tax code name.

HI all
I"m giving date to develop one Z report.Where i will get the PO tax amonut(not condition amount).i need total TAX amount and TAX code..from where i can get these two??
plz help me
thanks
ramesh reddy

Hi
for excise check table J_1IEXCHDR for header
J_1IEXCDTL for item excise
The Table name used to find the Tax Values are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Fetch the corresponding records based on the field
KNTYP
Search net you will get many threads on this

My ipod touch 5 is frozen on the lockscreen and i cant do anything except restart it and that doesnt hekp. will getting a new screen help? or is there another, less exspensive way? also, it is not connected to wifi.

I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
please help.
will getting a new screen help? or is there an easier, less expensive way?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How do I get a 3rd party WiFi adapter to be recognized as default WiFi?

I have a really great USB WiFi adapter that unfortunately does function the same as the PCI-e WiFi adapter. Essentially I have to connect to networks with the software that came with the adapter (which is really good) and I cannot use the status bar WiFi icon. This isn't much of an issue but unfortunately this means that AirDrop does not recognize this device either. I must turn on the PCI-e adapter (which is practically broken) to use AirDrop. Is there a way that I can make my USB adapter (Alfa AWUS036NHR using Realtek RTL8192C chipset) act as an integrated adapter?
I realize that
defaults write com.apple.NetworkBrowser BrowseAllInterfaces 1
will get AirDrop to work on all interfaces, but I'm really wondering if I can make Mac accept my adapter as "WiFi" under networks

Something.....a Mac or PC will need to have a 5.x version of AirPort Utility installed on the computer.
Perform a factory default reset on the Time Capsule by powering it off for a few minutes. Then, hold in the reset button first and keep holding for an additional 10-12 seconds while you simultaneously plug the power back into the Time Capsule. Release the reset button after the hold period and allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Open up AirPort Utility on the computer, select the Time Capsule and click Manual Setup
Click the Base Station tab below the row of icons to type in a device name and password that you want to use for the Time Capsule, set Time Zone, etc.
Click the Wireless tab next to the Base Station tab
Hold down the option or Alt key while you click on the Wireless Mode setting box
Select the Join a wireless network setting
Select the name of the wireless network
Enter the password for the wireless network
Verify the password
Click Update to save the settings
Note....everything here assumes that the router that provides the wireless network is using WPA2 Personal security, which is the default setting for the Time Capsule.

Tomorrow I will get my 3rd ipad2 due to light leakage!

Similar Messages

Maybe you are looking for