Too many stagnating entries in SMQ2

we are having thousands of entries in SMQ2. We have analysed and decided to delete all the entries on the inbound queue. Manual deletion of each queue entry is taking much time and ending with Time out error. Is there any way to delete all the entries of the inbound queue in some another way?
Thanks,
Arun

Hi Chan,
Thanks for the Note. It was useful in understanding about that particular table entry.
The entry i communicated earlier was created by another user.We are using scenario "A" only.
However we are using R/3 version of 4.7 and CRM version of 6.0.
In the table CRMPAROLTP , i am able to find entries of "CRM_FILTERING_ACTIVE" for other adapter objects such as CUSTOMER_MAIN, CUSTOMER_REL,MATERIAL etc.
But i dont have any entries of "CRM_FILTERING_ACTIVE" for "SALESDOCUMENT".
However we have an entry of CRM_NO_BEFORE_IMAGES for "SALESDOCUMENT".
Shall i maintain the following entry manually in R3 system which you asked me to check?
Parameter Name: CRM_FILTERING_ACTIVE
Parameter Name 2: SALESDOCUMENT
Parameter Name 3: SALESDOCUMENT
User : CRM
Parameter Value : X
What is the significance of this entry? Also, when this entry for CRM_FILTERING_ACTIVE will be created in CRMPAROLTP table?
Thanks a lot!!
Arun
Edited by: Techsavvy on Dec 4, 2009 6:42 AM

Similar Messages

Too many red entried in st02

Dear Experts,
I have installed sap ecc6 ehp4reday sp1 with db2 9.1 fp9 on hp-ux 11.31 1 x Itanium 1.46Ghz with RAM 16 GB.
the issue is there is too many REDs in st02 tune screen . Kindly suggest me any note matching with the given information or provide me solution .
the st02 summery is as bellow
Buffer Name                    Comment
Profile Parameter             Value      Unit Comment
Program buffer                 PXA
abap/buffersize               300000     kB    Size of program buffer
abap/pxa                      shared           Program buffer mode
CUA buffer                     CUA
rsdb/cua/buffersize           3000       kB    Size of CUA buffer
Screen buffer                  PRES
zcsa/presentation_buffer_area 4400000    Byte Size of screen buffer
sap/bufdir_entries            2000             Max. number of buffered screens
Generic key table buffer       TABL
zcsa/table_buffer_area        30000000   Byte Size of generic key table buffer
zcsa/db_max_buftab            5000             Max. number of buffered objects
Single record table buffer     TABLP
rtbb/buffer_length            10000      kB    Size of single record table buffer
rtbb/max_tables               500              Max. number of buffered tables
Export/import buffer           EIBUF
rsdb/obj/buffersize           4096       kB    Size of export/import buffer
rsdb/obj/max_objects          2000             Max. number of objects in the buffer
rsdb/obj/large_object_size    8192       Bytes Estimation for the size of the largest object
rsdb/obj/mutex_n              0                Number of mutexes in Export/Import buffer
OTR buffer                     OTR
rsdb/otr/buffersize_kb        4096       kB    Size of OTR buffer
rsdb/otr/max_objects          2000             Max. number of objects in the buffer
rsdb/otr/mutex_n              0                Number of mutexes in OTR buffer
Exp/Imp SHM buffer             ESM
rsdb/esm/buffersize_kb        4096       kB    Size of exp/imp SHM buffer
rsdb/esm/max_objects          2000             Max. number of objects in the buffer
rsdb/esm/large_object_size    8192       Bytes Estimation for the size of the largest object
rsdb/esm/mutex_n              0                Number of mutexes in Exp/Imp SHM buffer
Table definition buffer        TTAB
rsdb/ntab/entrycount          20000            Max. number of table definitions buffered
The size of the TTAB is nearly 100 bytes * rsdb/ntab/entrycount
Field description buffer       FTAB
rsdb/ntab/ftabsize            30000      kB    Size of field description buffer
rsdb/ntab/entrycount          20000            Max. number / 2 of table descriptions buf
FTAB needs about 700 bytes per used entry
Initial record buffer          IRBD
rsdb/ntab/irbdsize            6000       kB    Size of initial record buffer
rsdb/ntab/entrycount          20000            Max. number / 2 of initial records buffer
IRBD needs about 300 bytes per used entry
Short nametab (NTAB)           SNTAB
rsdb/ntab/sntabsize           3000       kB    Size of short nametab
rsdb/ntab/entrycount          20000            Max. number / 2 of entries buffered
Calendar buffer                CALE
zcsa/calendar_area            500000     Byte Size of calendar buffer
zcsa/calendar_ids             200              Max. number of directory entries
Roll, extended and heap memory EXTM
ztta/roll_area                3000000    Byte Roll area per workprocess (total)
ztta/roll_first               1          Byte First amount of roll area used in a dialog WP
ztta/short_area               3200000    Byte Short area per workprocess
rdisp/ROLL_SHM                16384      8 kB Part of roll file in shared memory
rdisp/PG_SHM                  8192       8 kB Part of paging file in shared memory
rdisp/PG_LOCAL                150        8 kB Paging buffer per workprocess
em/initial_size_MB            4092       MB    Initial size of extended memory
em/blocksize_KB               4096       kB    Size of one extended memory block
em/address_space_MB           4092       MB    Address space reserved for ext. mem. (NT only
ztta/roll_extension           2000000000 Byte Max. extended mem. per session (external mode
abap/heap_area_dia            2000000000 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia         2000000000 Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total          2000000000 Byte Max. usable heap memory
abap/heaplimit                40000000   Byte Workprocess restart limit of heap memory
abap/use_paging               0                Paging for flat tables used (1) or not (0)
Statistic parameters
rsdb/staton                   1                Statistic turned on (1) or off (0)
rsdb/stattime                 0                Times for statistic turned on (1) or off (0)
thanks
sadiq

Hello Sadiq,
I agree with the previous post, I'm afraid there is no quick fix for this, especially since we cannot see all of these red entries.
If your errors are purely in memory management on SAP side, you should consider posting in the CST "memory management" part of this forum
Advise from a DB2 perspective is to make sure that all memory specific setting are correct as per note:
899322    DB6: DB2 9.1 Standard Parameter Settings
After setting these parmeters and carrying out further fine tuning yourself, you should consider scheduling an early watch session from SAP.
Best of luck,
Paul
Edited by: Paul Murtagh on Apr 14, 2011 4:50 PM

Too many lock entries on BUT000 in SRM7

Hi,
When we are trying to update attributes of Org units through FM BBP_UPDATE_ATTRIBUTES, there are so many lock entries created for different values on table BUT000.
We are calling the said FM in loop becasue this FM has the capability of updating just one ORG unit at a time. So while the loop runs, there are a lot of lock entries created on BUT000 which are just not getting unlocked automatically.
There is a huge performance hit due to this. We are not sure how and why BUT000 entries are getting locked while updating org unit attributes.
Please suggest what should be a remedy to this.
Thanks,
Tirth

i dont know BUT000 table and have no idea what it does, but i suspect that it works like with every other thing in SAP system.
In DEV you mostly have not much data. E.G. in your case lets say 200 BUT000 entries.
200 lock entries aint a problem for the system.
In Quality you SHOULD have more data, up to number of data in production. If you have nearly same amount of data in Q like in P the problem should have existed in quality as well.
Another thing is that in productive MORE people work.
See there is a table where your lock entries get stored, if that table exceeds some certain amount of entries your system is going to slow down up to dumping or timeouting.
So in production system there are probably other people as well creating lockj entries with various transactions, while when you tested it in quality you were probably not much users on the system.

I need to enable my password to make purchases from I tunes. It was disabled because I entered it incorrectly too many times.I reset it but that didn't help. The message is "your apple ID has been disabled". Customer support will only help if I pay $29.00

I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pay $29.00. Help!

Hi David , Contact your bank they may have disabled your credit/ debit card because of an unusual amount of small purchaches of APPS , ALBUMS etc....... Has your name been changed if so create a new Apple ID and RELAX. BANKS TREAT THIS AS FRAUD they may need you to confirm you purchased them APPS.
davidfrommohrsville wrote:
I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pay $29.00. Help!
Jack
<Edited by Host>

Smq2 - Password logon no longer possible - too many failed attampts

Experts,
I was working on a data initial load from ECC to CRM. But the status remains "Running".
And in smq2 I saw the queue with "SYSFAIL" with info "Password logon no longer possible - too many failed attampts".
But my user's not locked in either CRM or ECC.
Any suggestions?
Thanks a lot
Shane

Hi Shane,
Whenever there is data transfer between R/3 and CRM it happens via a DIALOG user.
Henceforth, We have to maintain the dialog user in both the CRM and the R/3 systems.
To check whether the user is a dialog user , goto the Tx. SU01 and type in the User maintained in the SM59 Tx for the Data Transfer.
Check the User Type - It has to be Dialog User, else change the user to Dialog User.
Secondly, the User sepcified for the Destination in the CRM system has to exist in R/3 system also and vice-versa.
Henceforth, check the existance of the user in the respective system.
For Example. In Tx :SM59 ,for the R/3 destination QWC505, If the Dialog user specified was TESTER1. Then login to R/3, goto Tx: su01 and check the user exists in R/3.
Thirdly, In Tx:SM59, After sepcifying the LOGON details for the respective destination,Check the following :
1. Click on the REMOTE LOGON Button
2. click on the CONNECTION Test Button.
3. Click on the UNICODE Test Button.
If all the above criteria's are met, Then there should not be any problem WRT to "Password logon no longer possible error in the queues."
i faced the same problem some time back, I was to able to troubleshoot the problem with the above information. Hope You will also be able to fix the probelm.
Best Regards,
Vignesh Ravikumar

Data Warehouse Synchronization server - too many entries

I am having problems with app advisor not getting performace data. I believe that it is due to the Data Warehouse Synchronization
server having too many entries as I only have 1. How do I remove a server?

Seems you need to restore the OperationsManager Database from the previous backup, try the methods in the kb.
http://support.microsoft.com/kb/2771934/en-gb
http://social.technet.microsoft.com/Forums/en-US/0f80e33e-243a-44ab-ba1a-e73ec421de03/two-dw-synchronization-server-instances-by-mistake
Juke Chou
TechNet Community Support

HT1212 my phone is disabled due to too many entries of passcode. how do i unlock?

my phone is disabled due to too many entries of passcode. How do I unlock?

This will erase everything off your phone, but you need to do a restore. If iTunes wont let you restore it, while plugged in to the computer (with iTunes open), press and hold both the lock and home buttons, then release the lock button when screen goes black.

Too many wrong password entries?

Hi people.
My brother has forgotten his ipod password and has entered too many incorrect tries.
The message that comes up is in red background that says "iPod is disabled connect to itunes".
But when I connect to itunes it says that it needs a passcode, but hes forgotten his passcode.
He hasn't used it for afew weeks thats why hes forgotten his passcode.
And also doesn't know which laptop he synced it with last.
Does anyone know of anything I can do???
Any help is appreciated.
Thanks guys.
xo

This may Help... See Here:
http://support.apple.com/kb/HT1212

Exchange 2010 dynamic distribution group - too many entries in results

Hi
I've inherited some dynamic groups that were created on exchange 2003 [about 50 groups]. When I run the following query I seem to get far too many users returned [looking via ADUC the group should have 2 users]. How can I ensure I get the correct results?
Get-Recipient -RecipientPReviewFilter (Get-DynamicDistributionGroup -Identity "All Staff IT").LDAPRecipientFilter | Select Name,PrimarySMTPAddress
Thanks

Hi,
How about filtering members in EMC?
I think the abnormal result related to the filter conditions.
How about the command that Rich provided?
Thanks
Mavis
Mavis Huang
TechNet Community Support

Too Many Line Items While Creating a PO

Dear All,
Here we have a scenario:
We are creating a PO which is having around 10000(ten thousand) line items, and while saving system is showing error message "Too Many PO Line Items" Message No: FI899. and not able to save it.
Kindly Let me know is there any limit for line item creation in a PO.
Regards,
Ravi B

Limitations are limitations, you need a workaround or pay SAP for an extra developement. Probably worth, if you have such POs everyday.
( I cannot even imagine for what reason a PO should have more than 10000 items. Manual maintenance is impossible, the person would sit for a week and more to finish one PO. the CSR at your vendor is as well not able to put the items from your PO into their Sales order within a reasonable time frame - order entry should be ready before delivery date is arrived.
This sounds like you want buy a company and want create just one purchase order to buy any single material they have on stock. But for that purpose the PO is certainly not designed.
Can you give more background that makes my mind open ? )

Too many objects match the primary key oracle.jbo.Key

Hi OAF Gurus,
Currently we are implementing R12 Upgrade , for this we have deployed all the custom OAF Application related files on to the the respective JAVA_TOP folder.
We have a custom municipal postal application which tracks the Postal Details.
The page runs perfectly fine without any error in 11i instance, but the same is erroring out In R12.
In R12 it shows an error as Too many objects match the primary key oracle.jbo.Key[112010 2014-10-01]
here 112010 is nothing but the postal code id and 2014-10-01 is the Effective Start Date
We have a custom table as xxad_postal_codes_f (Date Track table)which contains the postal_code_id and effective_start_date (primary key is combination of postal_code_id and effective_start_date ).
The Table already contains a row for postal_code_id = 112010 and Effective_Start_date = Sysdate.
Now we want to update the entry for the same postal code with the Id being same as 112010 and Effective_Start_date as 2014-10-01 through custom PostCodeChangePG
at the time of save we are getting an error as Too many objects match the primary key oracle.jbo.Key[112010 2014-10-01]
The table doesn't contain any of the data mentioned ([112010 2014-10-01]) at the time of insertion, hence there should not be any duplication of primary key but still we are getting the error.
Please let us know how can we handle this..?
Below is the code which is getting called on Click of Save button of PostCodeChangePG
if (pageContext.getParameter("Apply") != null)
      PCodeCoWorkerBase coWorker = getCoWorker(pageContext, webBean);
          coWorker.processApply();
Code in PCodeCoWorkerBase
    public void processApply()
      String postalCodeId = UIHelper.getRequiredParameter(pageContext, "postalCodeId");
      Date startDate = UIHelper.getRequiredDateParameter(pageContext , "EffectiveStartDate");
     Serializable[] postalCodeData = (Serializable[]) applicationModule.invokeMethod( "insertPostalCodeMajorChange", params, paramTypes );
      finalizeTransactionAndRedirect( postalCodeData );
Code in Application Module
public Serializable[] insertPostalCodeMajorChange ( String postalCodeId, Date date )
    PCodeAmWorker amWorker = new PCodeAmWorker(this);
    return amWorker.insertMajorChange( postalCodeId, DateHelper.convertClientToServerDate( getOADBTransaction(), date )
Code in PCodeAmWorker
public Serializable[] insertMajorChange ( String postalCodeId, Date date )
    // Get the view objects we need from the application module
    OAViewObject viewObject = (OAViewObject) applicationModule.getPCodesVO();
    PCodesVORowImpl currentRow = (PCodesVORowImpl) viewObject.getCurrentRow();
    currentRow.validate();
    currentRow.setEffectiveStartDate(date);
    currentRow.setComment1(currentRow.getNewComment());
// Create a new row based on the current row
PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow); //This is failing out and gives the error
// Get the new effective start date as entered by the user
Date effectiveStartDate = currentRow.getEffectiveStartDate();
    // Calculate the previous period's effective end date
    Date previousEffectiveEndDate = DateHelper.addDays(effectiveStartDate, -1);
    // Refresh the current row (the one changed by the UI) with the data it had at the beginning of the transaction
    currentRow.refresh(Row.REFRESH_UNDO_CHANGES);
    // The current row will now represent data for the the previous period set the effective end date for the previous period
    currentRow.setEffectiveEndDate(previousEffectiveEndDate);
    // Insert the newly created row that now represents the new period
    viewObject.insertRow(newRow);
    applicationModule.apply();
    return generateResult(newRow);
PCodesVO() is based on PostalCodeEO
below is the code from PostalCodeEOImpl
public void create(AttributeList attributeList)
    // NOTE: This call will set attribute values if the entity object is created with a call to vo.createAndInitRow(..)
    super.create(attributeList);
    if (getPostalCodeId() == null)
      setPostalCodeId(getOADBTransaction().getSequenceValue("XXAD_POSTAL_CODES_S"));
    if (getEffectiveStartDate() == null)
      setEffectiveStartDate(getOADBTransaction().getCurrentDBDate());
After diagnosing the issue we found that the error is on the code of AMworker file while creating a new row PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow);
we tried so many things such as clearing entity cache, VO cache, validating for duplicate primary key but still not able to resolved this.
Please advice how to insert a new row on the PCodesVORowImpl without any exception.
Thanks,
Pallavi

Hi ,
One question here , if you are udating a existing record then why you are trying to create a new row
PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow);
Thanks
Pratap

Many Red entries in SM35 ...!!

Hello ,
when i execute TA sm35 i found many red entries with status - error.
What can be done to resolve them and what can be the reason.
And when i click on process Tab it is blank and *In process* Tab it has many entries with last years date and in Locked tab too.
what is meaning of all these entries in sm35.
And how can i resolve them , so that there can no entries with error.
Thanks,
Neel

Hi,
sm35 is for batch input session data, if some one tried to enter 1000 of data to the table, they deliver via LSMW like tools as batch input.
if tat fails, you must reprocess them.
please check this
http://help.sap.com/saphelp_46c/helpdata/en/69/c250274ba111d189750000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/ec/cdaa78d7f311d3a3ca080009ac98aa/content.htm
Thanks,
Jansi

Provider hosted app error message: The remote server returned an error: (429) Too Many Requests.

Hi,
I have a customer running a provider hosted app and in Sharepoint 2013. Things have been working fine but recently they keep experiencing an issue where the all the app parts on the page show the following error message. Does anyone have an idea what
could be causing this problem and how I can fix it? The Sharepoint site and provider hosted app site are running on a Server 2008 R2 box with IIS 7.5.
Server Error in '/Test.Sharepoint.App' Application.
The remote server returned an error: (429) Too Many Requests.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (429) Too Many Requests.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote server returned an error: (429) Too Many Requests.]
System.Net.HttpWebRequest.GetResponse() +8527180
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
Test.Sharepoint.AppWeb.Pages.LatestAnnouncement.GetLatestAnnouncement(Boolean showFullText) +610
Test.Sharepoint.AppWeb.Pages.LatestAnnouncement.Page_Load(Object sender, EventArgs e) +764
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18034
Impreza Software Development

Hi GuYumming,
I have checked the Sharepoint site using Fiddler and my X-SharePointHealthScore stays consistently on 1, I have even refreshed the site and had the "(429) Too Many Requests" error happen right in front of me whilst Fiddler is running and when I look at the
200 response for the Sharepoint site it is still showing "X-SharePointHealthScore: 1".
I assume because of this I do not need to make any of the changes suggested in your article above?
I have also been through the ULS logs and found the following 3 log entries that appear to relate to the issue but they do not really mean much to me so I am hoping that you can help:
Begin CSOM Request ManagedThreadId=59, NativeThreadId=12476
SPResourceTally(ClientServiceRequestDuration) value 1 + 150425 > 150000
ResourceBudgetExceeded, sending throttled status code. Exception=Microsoft.SharePoint.SPResourceBudgetExceededException: ResourceBudgetExceeded     at Microsoft.SharePoint.SPResourceTally.Check(Int32 value)
at Microsoft.SharePoint.SPAggregateResourceTally.Check(SPResourceKind kind, Int32 value)     at Microsoft.SharePoint.Client.SPClientServiceHost.OnBeginRequest()
Impreza Software Development

Too many alerts taking too much system resources in the XI system

We have been running Alerts in XI and looks like there are too many now. The alerts are stopped now from generation.
I can't even run the report RSALERTPROC successfully to delete the existing alerts from the system.
Anyone knows an alternative way to do this? Or what is the table name where the alerts are stored so that we can delete some entries.
Thanks a lot.

Hi,
a. If the "Suppress Multiple Alerts of This Rule" is checked for the Rule, we shall recieve only one alert mail for a particular error category. We have to confirm the Alerts by clicking complete in the Alert Inbox.
If we dont check this "Suppress Multiple Alerts of This Rule" , we will get all the alerts without being supressed.
b. Run the Report RSALERTPROC and delete all the alerts. Let me know the difficulty in running this report as you have mentioned...
c. Run the Report RSALERTTEST to display the Alert status.
Thanks,
Tanuj

Logs *FILLED* with "too many HTTP redirects".

as far as i can tell... this isn't causing an actual issue with any pages.
but my Console log is literally filled with :
*7/29/08 4:03:59 PM servermgrd[40] servermgr_web: Request for status failed: Error Domain=NSURLErrorDomain Code=-1007 UserInfo=0xae42540 "too many HTTP redirects". Admin Web graphs may be inaccurate.*
literally non-stop all day long. doesn't seem to be related to server load / traffic at all really. timing works out to roughly every 1 minute (very slight drift)... i get 2 or 3 entries. sometimes with maybe a 10 second gap in the "groups".
example of the "groups" :
7/29/08 4:19:49 PM
7/29/08 4:19:58 PM
7/29/08 4:19:58 PM
7/29/08 4:20:49 PM
7/29/08 4:20:58 PM
7/29/08 4:20:58 PM
7/29/08 4:21:49 PM
7/29/08 4:21:59 PM
7/29/08 4:21:59 PM
7/29/08 4:22:49 PM
7/29/08 4:23:00 PM
7/29/08 4:23:00 PM
it is getting very annoying obviously.
seeing the word "redirect" i did the obvious thing and disabled every single redirect i had on the entire site... including all subdomains. no change.
checked the master httpd.conf and the "sites" .conf files as well for anything else odd or redirect-ish looking. nothing.
since the timing is so regular... i can't really think what it might be.
one symptom i DO KNOW OF... is that the Server Admin app will not display the logs while the server is actively running. turn the server OFF ... shows the logs in the Log tab... turn server ON... that tab goes empty.
most likely related.
the logs are being written though. since i tail them just fine and see real-time activity.
i turned OFF all logging... error still shows up.
so as far as i can tell... not related to actual "Redirects"... not related to my disappearing log tab symptom...
any ideas?
IIRC this did NOT happen until migrating to Apache 2.
thanks.
zeb./

cat /etc/resolv.conf
{quote}
nameserver 209.165.164.3{quote}
sudo changeip -checkhostname
{quote}
Primary address = 209.165.164.4
Current HostName = www.arcus.org
The DNS hostname is not available, please repair DNS and re-run this tool.
{quote}
and i get...
{quote}
host www.arcus.org
www.arcus.org has address 209.165.164.4
{quote}
and subdomains show up right as well...
{quote}
host nps.arcus.org
nps.arcus.org is an alias for www.arcus.org.
www.arcus.org has address 209.165.164.4
{quote}
i guess i do get make double PTR records back from Network Utility... have www.arcus.org as an A and arcus.org as an A. should the latter maybe be a CNAME like the other (sub-)domains?
{quote}
4.164.165.209.in-addr.arpa. 86400 IN PTR www.arcus.org.
4.164.165.209.in-addr.arpa. 86400 IN PTR arcus.org.
164.165.209.in-addr.arpa. 86400 IN NS ns1.arcus.org.
ns1.arcus.org. 7200 IN A 209.165.164.3
{quote}
could that be the problem?
another server is set-up pretty much identical to this one (other than the content and it has a CMS) with the same DNS set-up more or less. (no subdomains. but the double A like this one) and it doesn't have the same error. at all.
though... it also has functioning web graphs and logs in it's Server Admin.
thanks.

Too many stagnating entries in SMQ2

Similar Messages

Maybe you are looking for