Logs *FILLED* with "too many HTTP redirects".

as far as i can tell... this isn't causing an actual issue with any pages.
but my Console log is literally filled with :
*7/29/08 4:03:59 PM servermgrd[40] servermgr_web: Request for status failed: Error Domain=NSURLErrorDomain Code=-1007 UserInfo=0xae42540 "too many HTTP redirects". Admin Web graphs may be inaccurate.*
literally non-stop all day long. doesn't seem to be related to server load / traffic at all really. timing works out to roughly every 1 minute (very slight drift)... i get 2 or 3 entries. sometimes with maybe a 10 second gap in the "groups".
example of the "groups" :
7/29/08 4:19:49 PM
7/29/08 4:19:58 PM
7/29/08 4:19:58 PM
7/29/08 4:20:49 PM
7/29/08 4:20:58 PM
7/29/08 4:20:58 PM
7/29/08 4:21:49 PM
7/29/08 4:21:59 PM
7/29/08 4:21:59 PM
7/29/08 4:22:49 PM
7/29/08 4:23:00 PM
7/29/08 4:23:00 PM
it is getting very annoying obviously.
seeing the word "redirect" i did the obvious thing and disabled every single redirect i had on the entire site... including all subdomains. no change.
checked the master httpd.conf and the "sites" .conf files as well for anything else odd or redirect-ish looking. nothing.
since the timing is so regular... i can't really think what it might be.
one symptom i DO KNOW OF... is that the Server Admin app will not display the logs while the server is actively running. turn the server OFF ... shows the logs in the Log tab... turn server ON... that tab goes empty.
most likely related.
the logs are being written though. since i tail them just fine and see real-time activity.
i turned OFF all logging... error still shows up.
so as far as i can tell... not related to actual "Redirects"... not related to my disappearing log tab symptom...
any ideas?
IIRC this did NOT happen until migrating to Apache 2.
thanks.
zeb./

cat /etc/resolv.conf
{quote}
nameserver 209.165.164.3{quote}
sudo changeip -checkhostname
{quote}
Primary address = 209.165.164.4
Current HostName = www.arcus.org
The DNS hostname is not available, please repair DNS and re-run this tool.
{quote}
and i get...
{quote}
host www.arcus.org
www.arcus.org has address 209.165.164.4
{quote}
and subdomains show up right as well...
{quote}
host nps.arcus.org
nps.arcus.org is an alias for www.arcus.org.
www.arcus.org has address 209.165.164.4
{quote}
i guess i do get make double PTR records back from Network Utility... have www.arcus.org as an A and arcus.org as an A. should the latter maybe be a CNAME like the other (sub-)domains?
{quote}
4.164.165.209.in-addr.arpa. 86400 IN PTR www.arcus.org.
4.164.165.209.in-addr.arpa. 86400 IN PTR arcus.org.
164.165.209.in-addr.arpa. 86400 IN NS ns1.arcus.org.
ns1.arcus.org. 7200 IN A 209.165.164.3
{quote}
could that be the problem?
another server is set-up pretty much identical to this one (other than the content and it has a CMS) with the same DNS set-up more or less. (no subdomains. but the double A like this one) and it doesn't have the same error. at all.
though... it also has functioning web graphs and logs in it's Server Admin.
thanks.

Similar Messages

  • What does too many http redirects mean and how do I fix it

    Does anyone know what the **** "Too many http redirects" means, and how the **** do I fix it ??

    500 errors in the HTTP cycle
    Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle when it communicates with the Web server:
    Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
    Open an IP socket connection to that IP address.
    Write an HTTP data stream through that socket.
    Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
    This error occurs in the final step above when the client receives an HTTP status code that it recognises as '500'. Frank Vipond. September 2010.
    Fixing 500 errors - general
    This error can only be resolved by fixes to the Web server software. It is not a client-side problem. It is up to the operators of the Web server site to locate and analyse the logs which should give further information about the error.
    Fixing 500 errors - CheckUpDown
    Please contact us (email preferred) whenever you encounter 500 errors on your CheckUpDown account. We then have to liaise with your ISP and the vendor of the Web server software so they can trace the exact reason for the error. Correcting the error may require recoding program logic for the Web server software, which could take some time.
    http://www.checkupdown.com/status/E500.html

  • I have an iPhone 4S I have done the recent update 6.1 and now my App Store is not working when I go into the feature tab I get an error " too many HTTP redirects" how do I fix this ? The other tabs are working and it is working on my iPad also

    I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS1702 I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any furthe

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

    I have tried to submit a dissatisfaction report following your instructions from my invoice for the recent purchase of smart office 2.  I can get no further as a report code keeps appearing saying too many http redirects so I can not get any further.
    I have also sent 3 emails to the company if Smart Office 2 with no response.
    How do I report my dissatisfaction which is growing with the frustration of not being able to contact any one!
    Zena Parton

  • App Store to download applications, "too many http redirect"

    在App Store下载应用时,显示“太多http重定向”App Store to download applications, "too many http redirect"

    I sometimes get that errror on my desktop with some Apple sites. Thus, I think it is a network problem, not iPod problem.

  • App Store displays "too many HTTP redirects" after I click a link of the app from a browser. Help.

    when i click a link to the app on the app store the browser closes and opens up the app store. after 3-5 seconds, a message pops up saying "too many HTTP redirects"
    i tried to reset all settings, still the same error
    i tried changing DNS servers, still the same error
    i tried changing security encryption on the wifi router, still the same error
    i tried to free up available space to 3GB, still the same error
    i restarted, still the same error
    This error occured 2 days after i updated the device to 6.1
    the app store alone works fine, but when i clicked a link of the app from a browser, the app store displays this.
    I'm using iPad Mini 16GB wifi
    can someone help us eliminate this annoyance (or bug, i might call it)

    It may be some apps on your iphone that is causing that.
    Nope. The security on iOS means that no app can interfere with the OS or any other app. An app may crash, but it cannot cause any other app to crash or misbehave, and no app can affect system functionality, like networking.
    you could download a virus protecter from the app store if you can acseess the app store.
    Nope. The same security in iOS means that not only are there no viruses (or malware of any other kind) for iOS, but also that anti-virus apps are not possible. They would not be able to scan anything except themselves, which would be singularly unuseful. Thus, there are not actually any true anti-virus apps in the App Store. There are a couple that can scan your e-mail for you, but that is achieved through connecting to the IMAP server where your e-mail is stored. They cannot scan the phone.

  • AppStore Show "too many HTTP redirects" .. HELP

    Im from Malysia,
    when i try to view apps in my iphone 5 apps store, it gives the ''too many HTTP redirects" message, what is the problem? someone enlighten me please.

    Hi Markc Anthony. I was using iOS 5.1.1 before this and decided to upgrade. I did a full Update to iOS 6.1 through iTunes. I used one of my iCloud backups to bring back all my apps and Data. Since then I've been getting a message saying "Too Many HTTP Redirects" on the App Store.
    I troubleshooted the steps by doing each of these steps:
    I tried different Sections of the App Store and all gave me the same message "Too Many HTTP Redirects"
    I went ahead and Check iTunes App and it looks like it has no issues.
    I went to Settings\iTunes & App Stores and clicked on my Apple ID and signed out. I made sure every other switch was off. Then I went back to the App Store and still got the same message.
    I went ahead and turned off the iPhone by holding the button at the top right corner and when prompted I slided the "slide to turn off" button. I waited about 5 seconds and then got to hold the top right button again until the Apple Logo flashed again. I still got the same message when I went to the App Store.
    I went back to Settings\iTunes & App Store and signed back in. The App Store would still give me the same error message.
    I finally gave up and did a full reset using iTunes again. I plugged in my iPhone clicked on its icon on iTunes and choose the button "Restore iPhone". I did not recovered from a backup this time and instead set it up as new. That actually worked. I am back to using my iPhone with no issues.
    You all can try recovering from backup it might actually work, but I am having a feeling that the error may have to do with recovering from a backup using iCloud. You can try it again, but make sure you let it finish and do not stop it (There is a way to stop it).

  • Too many http redirects in App Store for last week now why?!?!

    What's up with this problem?

    See:
    AppStore Show "too many HTTP redirects"...: Apple Support Communities
    Likely a network problem beyond your control.

  • Why do I get a too many http redirect message when accessing top charts in App Store?

    When trying to access Top Charts in the App Store I get a message stating "too many http redirects". I don't get the message with featured apps, updates, etc., just top charts. How can I fix this?

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • Appstore: too many HTTP redirection problem / túl sok HTTP-átirányítás probléma

    HY / sziasztok,
    When I open the appstore, and choose a program, and open the info page, after that the page didnt open,  just say "too many HTTP-redirect.".
    Why??
    szeretnék megoldást a következő problémára
    mikor belépek az appstore-ba és kiválasztok egy programot , nem nyitja meg a tájékoztató lapot, hanem kiírja hogy "túl sok HTTP-átirányítás".
    MIért van ez???

    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    by Patrick Jordan on August 30, 2012 in iPad Tips & Tricks
    I first posted about ‘Cannot connect to iTunes Store’ errors on the iPad back in May of this year. I was getting this error when trying to update or install new iPad apps.
    Since then the issue has continued to trouble many iPad and iDevice users – and thanks to our excellent readers and commenters we’ve learned a number of effective fixes for this problem.
    Here are the best ones I’ve seen – each of these has proven successful for many users:
    DNS Settings Change
    This fix has been recommended by Apple support and has proven successful for many commenters on my previous post. The way this works is to change DNS settings on your iPad or whichever iOS device is affected – by adding Google’s DNS server/s.  Here’s how to do this:
    – Go to the Settings app and tap on the Wi-Fi section in the left sidebar
    – Then look at the ‘Choose a Network’ section in the main right-hand side area of the page and look for the network name that has a check mark next to it and rendered in blue text – the WiFi network you are currently using
    – Tap on the blue arrow at the right-hand side of the listing for that network.
    – On the next screen you’ll see a section labeled ‘IP Address’ with three large buttons below it. Make sure the DHCP button is selected. Below that you’ll see fields for IP Address, Subnet Mask, and others. Tap on the DNS field (the fourth one down).
    – This will bring up the iPad’s on-screen keyboard and place the cursor at the end of the IP address for the DNS server currently being used by the iPad. Backspace until all the numbers for that address are gone. Then type this in:
    8.8.8.8
    Please note the periods after the first three 8s. You can also use 8.8.4.4 – both are valid addresses for Google’s DNS servers.
    Download an App Via the Purchased Tab in the App Store
    – Open the App Store app on your iPad or whichever iOS device is having this issue.
    – Tap on the Purchased button in the bottom navigation bar.
    – This will show you all the apps you’ve purchased on the iPad. Those that are already installed with a greyed out label. Others will display a small download icon, showing a cloud with a downward facing arrow in it.
    – Tap on one of the download icons and download a purchased app.
    For many users this has cleared some sort of App Store queue and allowed them to resume with normal updates. Some have had to repeat the download with a few apps in the Purchased section.
    Set the Date Forward and Revert Back
    – Open the Settings app and go to General > Date & Time
    – On the Date & Time screen, tap to turn off ‘Set Automatically’
    – Tap on ‘Set Date & Time’ and enter a date a couple of years or more in the future.
    – Go out of Settings and then straight back in and turn  ‘Set Automatically’ to restore the current date and time.
    (update me if work's)

  • TS3320 "Could not open the page, too many http redirects HELP!!

    When i click on a movie on the itunes app it says it cannot open because of too many http redirects.  How do i fix this?

    Read this whole message before doing anything.
    Back up all data.
    Quit iTunes if it’s running.
    Step 1
    Hold down the option key and select
    Go ▹ Library
    from the Finder menu bar. Move the following items from the Library folder to the Trash (either may not exist):
    Caches/com.apple.iTunes
    Caches/QCCompositionRepository-com.apple.iTunes.cache
    Saved Application State/com.apple.iTunes.savedState
    Leave the Library folder open. Try iTunes again. If it works now, stop here. Close the Library folder.
    Step 2
    If you still have problems, quit iTunes again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
    iTunes
    Note: you are not moving the iTunes application. You’re moving a folder named “iTunes.”
    Test. If iTunes now works, delete the iTunes folder on the Desktop. Otherwise, quit iTunes again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
    Step 3
    In the Preferences subfolder, there may be several files having names that begin with either of the following strings:
    com.apple.iTunes
    com.apple.mobile.iTunes
    Move them all to the Desktop.
    Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
    Test again. This time iTunes should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes iTunes to malfunction. Delete those files and recreate whatever settings they contained.
    If the issue is still not resolved, quit iTunes again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
    If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting iTunes and restoring the items you deleted in those steps from your backup.

  • App Store Showing "too many http redirects"?

    I am using an iPod Touch 4g running iOS 6.1.3 and just recently I have had a problem with it saying too many http redirects. I have tried reseting my device but any other solutions would be appreciated. Thanks!

    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - Try when connected to another network

  • "too many HTTP redirects", and I'm using Iphone 5 ios 6.1

    My name is zulhilmi and I'm from Malaysia. I want to download some game on app store but this word show up "too many HTTP redirects", and I'm using Iphone 5 ios 6.1, there's something wrong with APPLE???

    both on wifi and cellular data.. what exactly im doing??  just reset it but it won't help it for my iphone..
    am is should go to apple store and ask for reinstall ios?? or ios 6.1.3 is not compitible with iphone 4 (A4 chip)?

  • HT1933 How are you supposed to do this when it DOESN'T EVEN WORK!!!! you press report problem and it comes up saying " too many http redirects". Total useless !

    How are you supposed to REPORT THE PROBLEM when it DOESN'T EVEN WORK!!
    I clicked it as I got a receipt for something that HAS NOT EVEN BEEN BOUGHT ! (It's funny how apple try to charge me twice for something when I work nightshift and my phones switched off!)
    and all that happened was it came up saying "too many HTTP redirects" .
    And it won't let me report it ! X

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report your issue to the iTunes Store.
    Regards.

  • TS1702 I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem on ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).

    I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem with link in email on my ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • SelectInputDate component in a search form - JDev 10.1.3.0.4

    Cheers to all of you buddies in this valley of tears, have a good day I have a table that contains a date column, and a search form to do "query by example" and its date field is a "selectInputDate" with its date chooser. The date column in the table

  • Closed Third party Sales order still showing on Customer credit exposure

    Hi, We had earlier closed the status for  a partially Invoiced Third party Sales order ,where Goods Receipt quantity was more than the PO and Customer Sales order quantity from Being Processed to completed through a Z transaction. The payments for al

  • Request Number is not generated for BRM "new" role creation

    Hello Gurus, I have configured BRM in SAP GRC AC 10, along with the workflow . I have selected the following methodology Define Role --> Maintain Auth >Analyze & Access Risk>Request Approval>Generate Roles>Maintain Test Cases Role name : Y_TEST_BRM_F

  • Error -120?

    Brand new installation of GB3 on a Powermac G5, 10.4.5, I cant import any audio files, all I get is a error -120 message. Happens with song files from GB2 which have had audio files (.wavs, .aifs. etc) imported into them with no problem, also with ne

  • LSMW short dump

    Hi Experts, We developed a LSMW using Idoc method for Material master. I need to make changes to this LSMW to fix a short dump in step 5 [Read data]. The dump is because of a unicode error. i Know how to fix the dump. My question is how to make the c