Too much 0 in the report - depends on the pc

Hi @ all,
I have some problems with my laptop by executing queries. It puts too much 0 in the numbers. Instead of 10,00 the Bex displays 10.000,00. I checked all the settings, but everything is o.k.. Maybe it depends on the Bex version? I use Microsoft Office Excel 2003 and Bex BW 3.5. My BW is a 3.1 Content 3.2. Maybe I need another Bex? On my other PC all the queries are o.k..
Hope somebody could help me.
Regards Denise
Message was edited by: Denise Fischer

Hi Denise,
goto http://service.sap.com/swdc
-> Download
-> Support Packages and Patches
-> Entry by Application Group
-> SAP Frontend Components
-> SAP GUI FOR WINDOWS
-> SAP GUI FOR WINDOWS 6.20 (or 6.40)
-> Win32
GUI 6.20 is fully compatible with BW 3.5 if with a BW SP ge 13.
I do use
setup620_20-10001502.exe
gui620_54-10001502.exe
BW30B_15-10001502.exe (or bw350_4-10001502.exe)
sem35_6-10001502.exe
SEM31B_6-10001502.EXE
on a GUI 6.20 and work on BW 2.1C, 3.0B, 3.1C and 3.5 with no problems.
Hope it helps

Similar Messages

In the closure of Adobe, the process remains active and takes too much resource processor. Expected results:The process AdobRd32.exe has to be correctly closed.

In the closure of Adobe, the process remains active and takes too much resource processor.
Expected results:The process AdobRd32.exe has to be correctly closed.

I'm not sure on a Mac, but when I have this issue, I simply kill the thread (task-manager/processes/select the process, kill thread)
I have had no ill effects doing this.
It is my belief, it is the cloud, since they have a dcc connection, you can disconnect from the cloud, close everything, and the cloud is still connected to you. This is a feature of their update process I suppose.(speculation) Additionally, I remember reading somewhere this issue was due to applying administrative permission at the instigation of the installation. (which I do allow *some* trusted companies to have this so updates can be applied during my downtime. )
I have never had any overt issues after killing the thread and I have done that many times.
Hope this helps

Too much contrast, I can not see the light pantone on Illustrator

Since a few days my screen is too much contrast, I can not see the light of pantones Illustrator

Check the "Enhance Contrast" slider in Accessibility or Universal Access system preference.

Im currently looking for bonzi buddy or any type of AI avatar that can speck cause im studying to become a EMT an the terms are too much.wanted to study listening to the terms on my ipod while im on my way to school.

im currently looking for bonzi buddy or any type of AI avatar that can speck cause im studying to become a EMT an the terms are too much.wanted to study listening to the terms on my ipod while im on my way to school

These are tech forums for people using iMacs and experiencing problems. Frankly, I'm not sure what you are looking for (use of punctuation and spell checker is helpful as well), but if it isn't related to a Mac, you might try to post in a different forum.

Changing the report displayed on the basis of value selected frm the prompt

Hi,
I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
The user will select the report name from the prompt, once done the report that has been selected should show up
on the dashboard page and he should be able to select data on the basis of month and year from it.
Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
need two prompts one for report name and the other for month and year.
Thx :)

Hi Kishore,
When i click on the link given by you it takes me to a page where a link is given with text as under
Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
And when i click on this nothing opens up.
Thx
Edited by: Phantasm on Jun 22, 2010 3:05 AM

When send the report directly to the printer from Oracle IDS 9i

Hi.....
I m using Oracle IDS 9i, Oracle AS 9i and Database 9i for my new project.But i m facing a problem when i m trying to show a report from oracle IDS 9i.When i send the report directly to the printer without showing it,then the printer connected to the application server is working.But the printer connected to with PC(From where a send the command) is not working but printer connected with AS is working,but not that one which one i m wanting.....Why this problem is happening?Can anyone help me?
KSI

Note:It is always better to have network based printers rather then PC shared printers. What that means is your printer is not connected to a PC. It has a direct connection to the network via NIC. You would then setup the printer on your AS in the printers setup. If the AS is rebooted you do not need to authenticate the printer shares again with a network based printer.
If I understand you correctly, you have a printer connected to your AS(application server) and a printer connected to your PC. You can submit a report direct to the printer connected to the AS but cannot send a report direct to your printer connected to your PC.
From the symptoms you described, the problem is usually associated with the AS not being able to see the printer shared on your PC. You either have the address to your printer address defined wrong or your AS is trying to direct a job to your printer but doesn't have rights to do it.
First, Try to print a notepad job to your printer attached to your PC from the AS. This will tell you if you have access to do so or not.
- If it can't, you need to figure out why? This has nothing to do with oracle.
Second, thing to check is your Oracle "Report Queue Manager" on the AS. Make sure that you can submit a report manually from the Report Queue Manager. If it fails the "Report Queue Manager" will give you useful errors as to why it failed. This will help you isolate the problem.
Third, Once you can submit a job from the reports queue manager manually to your shared printer you should be able to submit from your application direct. If it still does not work your address to the printer is incorrect. Try submitting manually through the reports queue manager again. When selecting printer you will be given a list of accessible printers from the AS. Select the one connected to your PC. Once selected the full network address will appear. Copy and use this as the printer location in your job submission through your application.
That's it... Where using this right now and it works great. Hope this helps.
Eric.

Using web link to call the report by passing the parameter but report blank

Hi,
I have using web link to prompt to generate the report(Quotation Format) by passing SR number in Service Request object.
The result return is blank report, the URL link that i put in as below :-
https://secure-ausomxega.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Options=rfd&Path=/shared/Company_AEGA-3V6GLL_Shared_Folder/SR%20Quotation&Action=Navigate&P0=1&P1=eq&P2="Service Request"."SR Num"&P3=%%%SR_Number%%%
If preview in report folder, the report is generated with the output.
Is my syntax having problem or the method cannot be done this way?
Please advise

Hi Alex,
I manage to get the report output but the result is always same.
i have checked the filter, the filter is calling the SR number.
When i try to output to PDF an error prompt :-
Sax parser returned an exception. Message: Expected entity name for reference, Entity publicId: , Entity systemId: , Line number: 335, Column number: 12
Error Details
Error Codes: UH6MBRBC
Thanks
SK

How to Sort the report by clicking the column_header at runtime?

Hi, Im New to Crystal Reports. Im Using Crystal report server XI. and JSP I need to Sort the report by clicking the column_header at runtime. How to implement this ? Please help me. - Venkat. 

Hi VenkatI don't believe there is a way to do this out of the box. I believe you would have to do a custom code solution so that when you click on the header the report is re-run with a different sort order. This may not be that easy to implement.I'm going to check with the new WebElements custom functions that were released on this site. They may provide for this functionality. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Unable to filter the report by clicking the last column's name

Hi,
I have interactive report page having lots of column. All columns were not fitting in the screen so I added a code in the region--- header and footer section---
<div style="overflow: auto; width: 1220px; height: 700px;">
I got a scroll bar at the bottom. But a new problem arised. When I am trying to filter the report by clicking the column name in the report page , a popup is opening for the first column but the pop up is not opening for the last column. For the middle columns, the popup is opening but not below its name. This pop is for filtering the report based on that columns.
Please give some idea to fix this bug.
Thanks,
Chandra Bhanu

You could try to display as many columns as fit your screen, and put the rest of your columns as form fields in a detail view, somewhat like this:
http://apex.oracle.com/pls/apex/f?p=vincentdeelen:report_details_in_iframe_v1
Please tell the steps how to do it.
Thanks,
Chandra Bhanu

Sorting the report by clicking the column header

Hello,
Currently working on a requirement where i need to sort the report by clicking the column header. Can anyone please help me on this.
Suppose i have 3 colums deptno,dname,sal fields in my report. if i click deptno column header, report has to sort by deptno.Like that i need for other columns also.
Any help is really appreciated
Thanks
Ram

Hello,
You can sort the fields using method suggested by Cauvery. However if you would like to have Ascending/ Descending sort order control at column header, then would require to implement few additional steps.
First do the sorting of field using the way suggested by Cauvery. Once sorting is done, right click on the column name and select the option ' Bind Sort Control'. You will see the sorted field in the window. select the field and click ok.
Now you would get 2 arrows on column. If you click upper arrow, fields would be sorted in Ascending Order and if you click on down arrow, it would be in Descending order.
Regards,
Chinmay Athavale

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
 ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
 ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
 ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
 ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
 ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
 ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
 ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Sales Report - The report to display the Sale Dist accor to the Ship to.

Hi Gurus,
We have a report where Sales District is placed under the rows with Variable as Authorization processing type.
The current report is displaying the Sales District with Sold-to of the sale. But now the requirement is for the report to display the sales district according to the ship-to of the sale.
But, we need the sales district reported from the ship-to level.
and The format of the report should not change.
Can any one guide me on the above incident. Points will be awarded.
Regards,
Venkat.

This can be done by swithching sales district on the navigational attr of ship-to and use
And using the same in the place of current sales district.
regards,
Naveen.A

How to write the code to send the report output to the local file.

dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.

Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
 IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
* I_INTERNAL_TABNAME =
 I_STRUCTURE_NAME = 'SCARR'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
 CT_FIELDCAT = IT_FCAT
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_STRUCTURE_NAME =
* IS_LAYOUT =
 IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IR_SALV_LIST_ADAPTER =
* IT_EXCEPT_QINFO =
* I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = IT_SCARR
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
* BIN_FILESIZE =
 FILENAME = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
* FILETYPE = 'ASC'
* APPEND = SPACE
* WRITE_FIELD_SEPARATOR = SPACE
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = SPACE
* WRITE_LF = 'X'
* COL_SELECT = SPACE
* COL_SELECT_MASK = SPACE
* DAT_MODE = SPACE
* CONFIRM_OVERWRITE = SPACE
* NO_AUTH_CHECK = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = SPACE
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
* FILELENGTH =
CHANGING
 DATA_TAB = IT_SCARR
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* NOT_SUPPORTED_BY_GUI = 22
* ERROR_NO_GUI = 23
* others = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
 DOCUMENT = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
* APPLICATION =
* PARAMETER =
* DEFAULT_DIRECTORY =
* MAXIMIZED =
* MINIMIZED =
* SYNCHRONOUS =
* OPERATION = 'OPEN'
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* BAD_PARAMETER = 3
* FILE_NOT_FOUND = 4
* PATH_NOT_FOUND = 5
* FILE_EXTENSION_UNKNOWN = 6
* ERROR_EXECUTE_FAILED = 7
* SYNCHRONOUS_FAILED = 8
* NOT_SUPPORTED_BY_GUI = 9
* others = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How to send the report output to the application server in a excel file

Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
Sundeep

Dear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points *

Too much 0 in the report - depends on the pc

Similar Messages

Maybe you are looking for