Tool for displaying Interrupt Numbers assigned to differant devices

Hi ,
I need to know whether is there any tool to display the interrupt numbers assigned to different devices in a system. Actually i am developing a WDF driver for a device which has normal interrupt
line(not MSI) connected to the APIC.I have configured the interrupt for my device.But still my ISR is not getting called .
can anyone help me with this regard.
Thanks.

The device manager will do this use View setting resources by type and look at the interrupts.  A negative (or large hex value) is an MSI interrupt, a small integer value is a regular interrupt.  You say you have configured the interrupt for your
device, for a plug and play driver the system should be giving you the interrupt. configuration in start device, is this what you mean, or are you just trying to connect to a specific interrupt?
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

Similar Messages

  • Can separate apple ids be set up for individual family members that use different devices?  Several iPads are tied to one Apple ID (email address). Thank you.

    Can separate apple ids be set up for individual family members that use different devices (iPads & iPhones)?  Several family members are tied to one apple id (email address).  Thanks.

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • HT201236 my 'tab' key stopped working. I would like to assign a different key to replace it. is that possible?

    thanks!!

    Thanks for your replies.
    It is definite, according to my testings, that there is a hardware problem with the keyboard.
    i am looking for a way to assign a different key or combination of keys, instead of the 'tab' key.
    Illaass- I would rather find a way, within apples system to do this, rather than playing around with the system files... thanks

  • Muse, is there code for different devices in web page?

    When designing in muse, can you build desktop, tablet and phone all together with one website? Make where people who have phones goes to the phone site and people with tablets go to the tablet site. Desktop users go to desktop. If this is possible  is there any code I need to put in my web pages for visitors to go that have different devices? If so please tell me where I can find it. Thanks!

    Yes, you can build desktop, tablet and phone layouts for a website all in one Muse project and host the website to Adobe hosting through Business Catalyst or to a third party webhosting provider. The site logic detects the browser and device used by the visitor and automatically redirects to load the appropriate tablet, phone, or desktop layout. There are in-depth tutorials on building a mobile site in Muse - http://www.adobekb.com/creating_mobile_layouts_pt01.html
    Thanks,
    Vinayak

  • HT4314 I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

    I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

    By "game center account", do you mean Apple ID?
    If so, you can change it.
    1. Tap settings and navigate to iTunes and App Stores
    2. Tap "Apple ID" and then tap "Sign Out"
    3. Log in with a different ID.

  • Used SEO tool for iWeb now site not displaying properly on iPhone....

    Hello!
    I used the SEO tool for Iweb for my site and it;s displaying perfectly on my macbook but when I look at it on my iphone it's a mess... No background, no header, can't change pages etc....
    HELP!
    Thanks in Advance.

    So the problem occurs when you use that application.
    Does the problem occur when you do not use that application?
    If not, then SEO Tools is the problem and iWeb is not involved.
    Ask here : http://www.ragesw.com/forums/

  • Assigning a different mask for the same role

    Hi All,
      I have two users user1 and user2 are created in MDM and each assigned to the same role say role1.
    My requirement is user1 should get data of catagory 1 where as user2 should get all the main data in MDM.This catagory 1 is part of the main data.
    For this scenario i have created a mask say for example  catagory1_mask for catagory1 data and assigned this mask to the role role1 where user1 and user2 are being assigned to this role.
      And i have one more mask all_mask for user2 where i have assigned all the records of the main table to this mask. So when user2 logs into the MDM he would get all the data in MDM.
    If i assign this all_mask to the role1 user1 cal also access the whole data including user2. But as per the rqmt user1 should not access the whole data but have to access only catgory1 data.
    Can anybody advice me how can i assign a different masks to a one role when 2 users have been assigned the same role?
    Regards
    Sireesha.

    Hi Jitesh,
      I am getting one issue after creating duplicate role in portal.
    As u know i have created 2 duplicate roles for user1 and user2. Before creating the duplicate role i was able to see the user1 and user2 in the SRM MDM UI page of general tab.
       After creating the duplicate roles for these users am not getting the user1 and user2 in the User dropdown field of MDM UI screen...
    Is this bcoz of creating duplicate role?
    How can i get the user1 and user2 here?
    Please advice me...
    Regards
    Sireesha.

  • Unable to view external webcam content.  I'm using IE11 with Windows 7 64 bit.  I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

    Unable to view external webcam content.  I'm using IE11 with Windows 7 64 bit.  I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser.  I can play Youtube videos etc just fine. So why not the webcam?

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • May I know creative cloud for teams license is per user or different apps can assign to different user?

    May I know creative cloud for teams license is per user or different apps can assign to different user?
    Thanks.

    You have to assign the complete CC to the user, any particular app can not be assigned to each user.
    Creative Cloud Help | Creative Cloud for teams
    Regards
    Rajshree

  • IHow to force display of trailing zeros for fixed point numbers?

    I have an 8 bit unsigned fixed point number, with 7 integer bits and 1 fractional bit, so the desired delta is 0.5. I want it to always display the fractional bit, even when that bit is 0. In other words, as this number is incremented, I want to see:
    0.0
    0.5
    1.0
    1.5
    etc.
    But instead I'm seeing:
    0
    0.5
    1
    1.5
    etc.
    I set the display format to Floating point, with 1 digit of precision. The "Hide trailing zeros" checkbox is NOT checked. What am I doing wrong?
    I realize I could convert to single precision for display purposes to make this happen, but I'd rather make this work with fixed point.
    Thanks,
    -Ron

    I just rustled up a VI with what I understand your input to be - unsigned 7 bit mantissa and 1 bit exponent input, and have it displaying 2 decimal places.... Is this what you're after or did I miss it?
    - Cheers, Ed
    Attachments:
    zeros.vi ‏7 KB

  • Monitoring and backup/restore tools for TT databases

    Hi there,
    I am new to TimesTen. I need to set up automatic monitoring for TT databases. Are there any tools available? Also would like to know if there are any tools for tracking backups for these datastores.
    Any standards & best practices for managing TimesTen environment available?
    Appreciate any help/advise.
    Regards

    Hi Vidya,
    You did not mention what type of Unix/Linux you are using or what version of TimesTen. I will assume it is a mainstream Unix (Solaris, HP/UX or similar) or Linux (RedHat, SuSE etc.) and a recent (6.0 or 7.0) version of TimesTen. I will also assume that you want to put everything back 'as is' after the rebuild (i.e. you are not upgrading TimesTen versions or changing anything else about the configuration). IF YOU ARE PLANNING TO UPGRADE TIMESTEN AS PART OF THE REBUILD THEN THE STEPS LISTED BELOW WILL NOT WORK 'AS IS' AND WILL NEED MODIFICATION.
    Assuming that the machine is going to be 'wiped' during the rebuild then the main things you need to preserve are:
    1. Kernel parameter and other system level configuratiopn for TimesTen and indeed any other software running on the box. You would do this by taking copies of the relevant system configuration files and re-applying the customisations after the rebuild. As well as kernel parameters this might include things like users and groups.
    2. The port numbers used by each installed TimesTen instance. You can find these out from the ttVersion and ttStatus commands in each instance. Make a note of these as you will need them afterwards for re-installation.
    3. TimesTen configuration files for each installed TimesTen instance. You may have multiple TimesTen instances of the same or different versions installed. You can find out by looking at
    the file /etc/TimesTen/instance_info which contains details of every TimesTen installation (instance) on the machine. The instance configuration files are found in <install_dir>/info and are called; ttendaemon.options, sys.odbc.ini, sys.ttconnect.ini, snmp.ini and ttpasswd. You should make safe copies of all these files for each instance.
    4. Any user configuration files that e.g. configure TimesTen environment variables and any user ODBC configuration files such as .odbc.ini in user's home directory.
    5. Any datastores (databases) that you need to preserve across the rebuild. For each of these, take a backup of the datastore using the TimesTen ttBackup command and preserve the output files/directories. You need to do this separately for each datastore in each TimesTen instance.
    After you have secured the above then you should be okay to do the rebuild. After the rebuild you should:
    a) Re-apply all system level config changes (kernel parameters, users, groups etc.) preserved from (see step 1 above).
    b) Re-install all required TimesTen instances into the same installation directories, and using the same port numbers, as they had previous to the rebuild (see step 2 above). The installations should be performed as the same user as the original installatuions (the ttVersion output from step 2 above would tell you that). Prior to performing the installation you would need a sysadmin to create the /etc/TimesTen directory and assign suitable permissiosn to it (see TimesTen installation Guide for more details).
    c) Re-instate the saved TimesTen configuration files for each instance (see step 3 above).
    d) Re-instate any user level configuration files (see step 4 above).
    e) Re-create any datastore directories as required ready to receive the restored datastores (check datastore and log file paths in ODBC configuration files).
    f) Restore the datastore backup directories (created in step 5 above) to somewhere on disk.
    g) Use ttRestore in each instance to restore each datastore from the backup files restored in step (f) above. This re-creates all your datastores with all their data etc.
    If you follow this procedure and are not doing anything like changing TimesTen major versions (e.g. 6.0 -> 7.0) as part of the rebuild then you should not need to relink any application binaries. If for some reason you want to relink any application binaries you should consult the application developers who should have suitable makefiles to do this.
    I think this is pretty complete but of course it is possible there are additional things specific to your installation or operational regime of which I am unaware and so of course we can not accept any responsibility for any errors or omissions...
    I will send you the document on monitoring TimesTen via your e-mail address.
    Chris

  • Parent Child Hierarchy causes numbers to be different

    Hello,
    We have a parent child hierarchy in our chart of account dimensions. When the hierarchy is included in an analysis, the numbers are correct. If the hierarchy is not included in the analysis and a column from the dimension with the hierarchy is included, the numbers are very different. They are overstated by a large amount.
    For Example, I have two analysis:
    -In the first analysis the hierarchy is included and the grand total is 2,383,080,784.
    -The second analysis has simply excluded the hierarchy from the analysis and the total shoots all the way up to 6,901,729,527.
    I have screen shots but don't know how to include them in this kind of a post.
    Has anybody else seen such behavior? This seems like it would be a big deal so either we are doing something wrong or this is a bug that needs fixed.
    We are on 11.1.1.6
    Thanks in advance,
    Brian

    Hi,
    Thanks for the reply, I'm actually using snapshots. But even with the Type 2 Dim I don't think it will work.
    When OBIEE generates the very first sql against the Parent-Child table the fact table is not included in the query. It seems to create 2 queries - one to find the top level parent (ancestor key is null) and then one to find all the leaf nodes.
    It does not have any join to the fact table when it does this. So if you have multiple rows in the table (with date stamps) for a single row (person in this case) - it picks up both rows. Therefore, when you have a person who was, say, promoted to manager, and WAS a leaf node, and is now a manager, they show up in the leaf query and don't display in the hierarchy as a manager.
    Once it has the leaf nodes and it joins to the fact table everything works (ie the surrogate key join).
    I'm trying to figure out if there is any way to influence those initial queries against the parent-child table.
    Hopefully that made sense.
    Thanks,
    Tori

  • Paperq: a tool for managing a reading queue of academic literature

    paperq is a command-line tool for managing a reading queue of academic literature.   It's usage is simple: you add files to the queue and then you run it without arguments to open the next file in the queue. The queue part of the code itself is rather simple but paperq also offers some other nice features:
    Add files (-a option)
    Remove a file (-r option)
    Display info on a file. Given a BibTeX file,  print the bibliographic information, otherwise print the file location (-i option)
    List all files (or bibliographic information) in the queue (-l option)
    Create an archive (tar.gz) of the papers in the queue, prepending the file names with the queue position (-z option)
    Operate on any file in the queue, instead of the head, via the -n option
    Peek at a file (open it, but don't remove it from the queue) via the -p option
    Print a file (-t option)
    Configurable file-opening command (xdg-open %s, by default)
    Documentation is available in the README file or on the website (see below). A man page is also included.
    I've been using it myself now that I finally stopped using Mendeley. I find it to be quite handy, so I've packaged it up to be shared with others.
    Screenshot showing the bibliographic info:
    Website
    AUR
    Last edited by jakobcreutzfeldt (2014-01-28 09:15:50)

    I just uploaded version 1.1.1.  I somehow missed a bug in which the first word of the author list was being chopped off. It's fixed.
    marttt wrote:Thanks very much for this! I can finally ditch some of my ugly scripts now. Have you considered adding other bibliographic data formats in the future? (Here is an interesting solution with YAML and Pandoc and, correspondingly, proper UTF-8 support.)
    Glad to hear it could be of use to you! Honestly, this also just started out as a quick script but little by little I started adding more handy features.
    As for other bibliographic formats, it could be possible. I'm mainly familiar with BibTeX, so I would need to see how the other formats look. 
    In all honesty, the bibliographic info printing could be greatly expanded: only journal articles are supported at the moment, and mathematical expressions in the titles aren't yet supported (i.e. greek characters).  It might be more efficient in the long run to write a dedicated biblio parsing program that loads some pre-written BibTeX-parsing library rather than all the crazy sed work that's going on in there right now. If that's the case, then it's just a  matter of loading some library for a different biblio file format in order to support it.

  • I'm tring to install two Daqcard700​'s in same computer running Win2000 and Nidaq6.9.2 and the cards are not given two different device numbers by the NIDAQ device configurat​ion wizard.

    One Daqcard 700 and one daqcard 16x-50e in same machine work fine but two Daqcard 700's are not assigned two diferrent device numbers by the device configuration wizard.

    I have this same problem with the previously described observations.  I tried two Daqcard-700s in three different laptops, two with Windows XP and One with Windows 2000.  Tried all suggestions in Knowledgebase and Forum I could find with no luck.  Single cards work ok.  Removed and reinstalled drivers in Device Manager.  Tried the Windows 2000 patch for this problem.  Changed the PCMCIA adapters on the laptop to Generic Cardbus  Controller from one suggestion.  Running Labview 6.1 with Ni-Daq 6.9.3 and Max 3.1. Tried also Max 2.1.
    Any help will be greatly appreciated.
    thanks,
    Ben1167

  • Tools for SAP development work management?

    Hi fellow SAP developers!
    As you know, in a big software company the management of development work can be a challenge. Everyone should be able to see quickly who is doing what, who is available for new work, how did some old requests get solved and where is their documentation. We are talking about more than just some simple ticket management system here. It would be a central repository and work management tool for years to come.
    I am interested to hear some suggestions for good tools that can be used for development work management in SAP world.
    - It should be a tool where development requests can be input, reviewed, approved, documented and stored.
    - It should support storing attachments
    - It should support a project structure, under which the development items are created.
    - It should be searchable and have different views to the development requests (for example by project, request raiser, developer, status etc.)
    - It should have some kind of approval system or workflow.
    - It should also support email notifications when the status or person assignment changes.
    - It should run on large corporate network (accessible in intranet, perhaps via browser).
    - A nice bonus would be a mobile client access for urgent cases
    I'm keen to hear any proposals, even if not all the points in the wishlist are fullfilled
    I'm interested to hear any comments on your exeperiences on various work  management tools. What worked and what not?

    Well, a SAP based product would be efficient as it is integrated and there would be no need for additional licenses etc.
    I have to investigate the Solution manager offerings more, if that indeed could handle this task. Have you got any further information or experience?
    Rally sounds interesting as well! Are there any other tools like that, proven good in SAP development?
    For simply using Abap workbench, I'm afraid that is not good enough for what I'm after. How would you manage for example work queues, project based issue views and extensive solution documentation with it? And everything would have to be searchable and visible for also for non-technical managers who do not log in to SAP.

Maybe you are looking for