Tools do not seem activated
When I try to Flash on Mac, only an outline of images appear,
paint bucket will not work to fill any of ovals or rectangles. I
can see the images have been imported but will not appear on
screen. Same program works with PC but will not work on Apple. Is
something not activated?
make sure layers are not set to Outline mode.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
judithstayton wrote:
> When I try to Flash on Mac, only an outline of images
appear, paint bucket
> will not work to fill any of ovals or rectangles. I can
see the images have
> been imported but will not appear on screen. Same
program works with PC but
> will not work on Apple. Is something not activated?
>
Similar Messages
-
Hi, I'm trying to extract the nano sim tray on my new Ipad air. I know how it should come out but the tool does not seem to release the tray. Any ideas?
Thanks. It needed more pressure than I expected!
Didn't want to break it when it's less then 24 hours old!
BB -
I am working on a Mac with Yos 10.10.1 and my clone stamp tool does not seem to be working.
Am I doing something wrong?
Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about program problem help... a program would be Photoshop or Lighroom or Muse or ??? -
My highlighter tool does not seem to be working.
The tool is available, but when I select it and drag on the text that I want to highlight, nothing happens?
Acrobat 8 Standard. 8.1.3.
-
The site reporter tool does not work
There is an item in Firefox Help where you can report a Web site that does not work. Originally, a report database was available on line and you could review existing submissions. The database access site was officially [http://blog.mozilla.com/website-archive/2010/12/08/mozilla-reporter/ retired] and the data gathered were expurgated and dumped for everybody to download. It is 1.3 GB uncompressed; install with { gzcat | mysql mozrep; } to avoid doubling the space.
The [https://support.mozilla.com/en-US/kb/Menu%20Reference#w_report-broken-web-sitead site reporter tool] does not seem to work any more. It just submits the report forever. It seems that Mozilla has broken functionality in a supported browser, disregarding all users. The original reporter site redirects to a new feedback site. The problem with that site is that you have to install version 4 beta to use it, which is not nice at all. To add exploitation to disrespect, Mozilla tries to turn all customers into beta testers.Hi there
Sorry, but you need to give us more information. For starters, you *ARE* using Adobe Captivate, right? And what exactly are you trying to do where you are seeing the eyedropper isn't working? Can you post a screen capture or a small video recording of it? You can use Jing http://www.jingproject.com or maybe Screenr http://www.screenr.com.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Blade tool is not working on primary story line?
Went in to take out an annoying blip in my primary story line and suddenly the blade tool does not seem to work. I position my header and click on primary story line and nothing happens. It will work on my audio (which is broken apart). I also cannot seem to get the clip to move toward the spot I want it to join to. This was pretty effortless before. Have the rules changed in the new update?
I am not where I can post a screen shot. Will when I can.
When I had something that I wanted to cut out, I would use the blade tool to cut at point in the story line (in the time line) and then I would drag the story line over what I didn't want and join it to what I did want. When I select blade tool and click on the story line, nothing happens. No little line appears to show that the film has been cut. The name of the film clip usually came on to the clip at the point of the cut. If I first cut my sound and then come up to the primary story line, then it will cut but then the handles appear but I cannot move anything.
I think 10.1 has some upgrades in how you interact with cut clips but the support materials I read don't seem to say anything different. I'm stymied by something that used to be pretty straightforward.
Fearing the Upgrade Blues. -
Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this
Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler -
InDesign 5.0 tools/panels not activated with mouseover/mouseclick
The following summarizes the hardware, software, procedures and results in my attempt to resolve issues with InDesign 5.0. Suggestions would be appreciated. Thanks!
System:
HP EliteBook 8540W
Intel Core i7 CPU Q820 @ 1.73GHz 1.73 GHz
8 GB
64-bit Operating System
Pen Input Available
Wacom Intuos4 pen and mouse
Adobe Products:
Adobe Creative Suite 5 Master Collection, Version 5.0
Acrobat 9.4.6
Procedure:
The computer system control panel > program uninstall was used to clear all Adobe products except Acrobat, AIR, Flash Player and Media Player. The Adobe CS5 Cleaner Tool for Windows was installed and run at Clean All to remove all products and installer-related files for the Creative Suite 5.0.
The Creative Suite 5.0 was re-installed on the HP cpu using the registered program discs.
The Adobe 7_0_4 InDesign Patch-All was downloaded from Adobe and installed.
Result:
Tools Panel: Selection Tool and Direct Selection Tool will not highlight with mouseover nor activate with mouseclick.
Layers Panel: Can't click-on Layer Name to activate that Layer; individual Layer Names can't be double-clicked to rename; visability can't be toggled with mouseclick; the Create New Layer icon at bottom of panel can't be activated with a mouseclick; a New Layer can be created from the Panel upper dropdown menu; Panels location can be moved, panels opened/closed, and collapsed with mouseclick.
Character Panel: None of the Character styling dropdowns within the panel can be activated; Character styling options can be activated from the upper right panel options triangle dropdown, and they can be activated from the Application Bar: Type > Font and Type > Size. In the Type > Font flyout panel displaying all fonts, the mouse wheel will not scroll through the fonts.
Paragraph Panel: Can't click on paragraph alignment option icons.
Links Panel: In Pre-flight, can't activate link list item with mouseclick.
Stroke/Color/Swatch Panels: Can't activate any tools within these panels with mouse.Peter,
Thank you very much. I re-set DPI to default, rebooted, and the issues I was experiencing with InDesign were gone.
Brad -
Ya, okay ! I use a number of PSE programs, one of which is PSE 9. The tools for some reason seem to have frozen. When I use the move tool I don't get just one hand but 3 hand symbols all next to each other. Same thing with the crop tool, I don't get one symbol but 3 all next to each other. There are a couple of tools that just don't work at all. It's like the PSE 9 got hit with some virus or sorts. Oh well, live and learn. Trying to get through to tech service is next to impossible.
Have you seen this other thread you started about this problem?
Photoshop Elements 9 is messed up.
Did you use Barbara's fix?
It would be less confusing if you only posted this question once, not three times:
HOW DO I RESET ALL THE TOOLS IN PSE 9 ? THE CURSOR IS REALLY MESSED UP AND DOES NOT WORK WITH THE TOOLS. I TOUCH THE HAND AND I GET 3 HANDS, I TRY TO USE THE CROP AND I GET 3 SMALL CIRCLES. THE CURSOR IS REALLY MESSED UP. DO I HAVE TO GET ANOTHER PSE 9 ?
Photoshop Elements 9 is messed up.
The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice! -
hi. I have the ipad 4 and have got a Vodaphone ( India) data sim, however it does not seems to work. The CS support at the gallery and the call center is lousy as they dont seem to know what they are upto. Although the sim is active i am unable to surf. The vodaphone number is
9168554687. Please assistSince this is a carrier issue, we are probably not going to be able to help you. You are paying for this service, so be assertive when you call customer service.
-
I have upgraded to IOS 7 and now I wish I did not as I have lost face time and iMessage and they would not get activated no mater what I have tried .it seems they are trying to get connected but are unable to do so.
It is becoming frustrating to try to get it activated .
I do not know how to get it activated when it keeps informing me that there is no net work connected
Could not sign in please check your network connection and try again.
For both iMessage and FaceTime .
Any radical solution that you have will be appreciated as it is becoming frustrating .First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
Hi
I have tried to restore my i phone 3gs using a USB cable connecting to itunes.The process has gone smoothley but i am now getting this message on my i phone;"your i phone could not be activated because the activation server is temporarily unavailable.Try connecting your i phone to itunes to activate it,or try again in a few minutes.I have been trying and trying again and switched off my firewall too.but still getting this message.Can anyone please advise me?That is almost always because the phone was hacked to unlock it from the original carrier.
-
Lion Server not reading Active Directory Groups reliably
I am trying to upgrade one of our XServes from Snow Leopard Server to Lion Server and am running into a strange issue with our Active Directory based users and Groups.
The current Snow Leopard Server serving files from a XSan volume is running fine, though we find a very long Lag time for Windows users to connect. Once a few users have connected the lag seems to go away, but it is still not nearly as fast as Mac users connecting or Windows connecting to a PC server.
So I have connected a second Xserve to the SAN and performed a clean install of Lion Server. Initially while it would find my Active Directory Groups it would not import any of the users, so obvioulsly no one could connect. In a last ditch effort I installed the beta of 10.7.4, which seemed to resolve the issue for a small group of test users. However as I expanded the test I found that some users would get a message that the were no resources available to them, or they didn't have the correct permissions. This is very strange as everyone is in the same group so should have the same permissions. As a test I took one of the user accounts and created a new share and gave him R/W permission to that share and suddenly all of the shares that he should have had permission to in the first place popped up.
The only thing that I can think of is that we have such a large Active Directory structure that the authentication is timing out or reaching some user limit and stops looking. (we have over 50,000 users and thousands of groups spread through multiple OUs in the AD structure)
The new Server.app in Lion looks nice, but it does not seem to have nearly the robustness of the previous Server Admin tools. For instance, I never needed or wanted to setup a "Golden Triangle" but with Lion it is required. Perviously I could search for AD users or groups and drag them from the search window to the share to assign permission, now even though I've imported the groups and users it needs to search the entire directory when assigning permissions - why can't it see the groups that are already there? Why can I run a dscl search and find a user or group instantly, but the Server.app hangs for 5 minutes and shows 0 results?
Has anyone found a way to make Lion Server work in an enterprise environment?Yesterday morning I bound a 10.7.4 server to our AD, and in the afternoon I eventually saw all the AD users, groups, etc show in Workgroup Manager. Now, with dscl, I can see all the AD user and group records, and with Workgroup Manager, I can search the groups, users, and computers, but with the Server.app, when trying to create new group of the type "Imported group from another directory", the searches returned nothing. Directory Utility can show all the AD information also. Our AD has thousands of user record, and so it is reasonable that it may take some time for the Mac server to get all the info. But from the add users or groups interface, I just could not get any search results. What could be wrong then?
-
Illustrator CC 2014 - spacebar hand tool shortcut not working, how can I fix this?
The hand tool is not being temporally activated by the spacebar in Illustrator CC 2014.
I've restarted, deleted preferences, nothing seems to work.
I’m pretty sure it was working when I first installed the new version - just stopped for no reason.MB&B,
Item 7) under 5) in this list shows the usual suspects.
You may also consider trying some of the other options on the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Quicktime 7 does not seem to work properly on my system
I have juste tried installing the latest Quicktime version on my system (Asus G71Gx, CPU Intel Core2 Quad Q9000 @2GHz, RAM 6 GB, Windows Vista Ultimate 64 bits with SP2), but it never worked properly:
+ I am unable to view Quicktime content on web sites inside my browser (IE 8), getting various error messages or nothing,
+ when I try running the Picture Viewer, I am getting the following error:
(from system "application" event log)
Nom du journal :Application
Source : Application Error
Date : 24/12/2009 19:31:41
ID de l'événement :1000
Catégorie de la tâche :(100)
Niveau : Erreur
Mots clés : Classique
Utilisateur : N/A
Ordinateur : Appolon
Description :
Application défaillante PictureViewer.exe, version 7.65.17.80, horodatage 0x4afa5f57, module défaillant QuickTime.qts_unloaded, version 0.0.0.0, horodatage 0x4afa620b, code d’exception 0xc0000005, décalage d’erreur 0x631abe79, ID du processus 0x25d84, heure de début de l’application 0x01ca84c70b65cde0.
XML de l’événement :
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-12-24T18:31:41.000Z" />
<EventRecordID>5557</EventRecordID>
<Channel>Application</Channel>
<Computer>Appolon</Computer>
<Security />
</System>
<EventData>
<Data>PictureViewer.exe</Data>
<Data>7.65.17.80</Data>
<Data>4afa5f57</Data>
<Data>QuickTime.qts_unloaded</Data>
<Data>0.0.0.0</Data>
<Data>4afa620b</Data>
<Data>c0000005</Data>
<Data>631abe79</Data>
<Data>25d84</Data>
<Data>01ca84c70b65cde0</Data>
</EventData>
</Event>
+ when I try running the Player, I am getting the following error:
(from system "application" event log)
Nom du journal :Application
Source : SideBySide
Date : 24/12/2009 19:32:32
ID de l'événement :33
Catégorie de la tâche :Aucun
Niveau : Erreur
Mots clés : Classique
Utilisateur : N/A
Ordinateur : Appolon
Description :
La création du contexte d’activation a échoué pour « C:\Program Files (x86)\QuickTime\QuickTimePlayer.exe ». Assembly dépendant Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.4053" introuvable. Utilisez sxstrace.exe pour un diagnostic détaillé.
XML de l’événement :
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SideBySide" />
<EventID Qualifiers="49409">33</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-12-24T18:32:32.000Z" />
<EventRecordID>5559</EventRecordID>
<Channel>Application</Channel>
<Computer>Appolon</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1 e18e3b",type="win32",version="8.0.50727.4053"</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>C:\Program Files (x86)\QuickTime\QuickTimePlayer.exe</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Has anyone encountered similar problems?
Does anyone have any idea about the next steps to take in order to try resolving this issue?
In advance, thanks for any help you could provide.
Regards.
Christophe
Message was edited by: chris_massuccoAmong the various errors I got trying to access QuickTime content in my browser, I received the "Failed to initialize" message, which apparently other people encountered... Though, the problem descriptions I have read so far in the corresponding threads do not seem to match my case.
Has anyone got the same errors I received outside of the browser (see previous message)?
Maybe you are looking for
-
How do I get PowerPoint presentation to display properly without having PowerPoint?
Suggestions on how to get PowerPoint presentation to display properly aligned on MacBookPro? These are available for download as ppt, pps & pdf Our co just came out with new presentations in PowerPoint. They are going toward iPad2, & suggest using Do
-
FX-5200 No Video on TV Out (all else okay)
Hi All, Recently replaced my old AGP card with an FX-5200-TD128 so I could have TV out. Everything is okay except there is no video on the TV. It shows everything else though that is on the monitor. The tv is connected via the composite cable adaptor
-
HT201364 OS X Mavericks required space 8 GB. Does this mean 8GB of free Hard Disk Space?
OS X Mavericks required space 8 GB. Does this mean 8GB of free Hard Disk Space?
-
Error during early phase of installation
Hello, I am facing an error during an installation. Our setup is as follows: empty Oracle 10.2.0.2 Database on HPUX Installation of BO Enterprise Server on Linux To meet expected performance issues and ressource consumption it should be a distributed
-
Is it possible to create a custom control class and insert its instance in a form?
I have several controls that will work togheter and in a similar way in several forms. For example, a GroupOption with two ButtonOptions. Clicking on one button option the frame willl became higher and a TextBox will appear; clicking on the other th