Tools to diminish time of development

im going to start a new sw proyect now, and i dont want to loose time programming things that already have been done or that can be done with easily with some tool.
At this time the proyect consist on a DB that and a basic web system woth some forms. what technology do you recommend, and wich tools could be usueful to develop it?
Thanks

Sun Java Studio Creator
get it for free from
http://developers.sun.com/prodtech/javatools/free/

Similar Messages

If DW 2014.1 cc does not support database, binding, server behavior, and PHP/MySQL require it, but using Adobe Extensions Mngr IS NOT recommended, then WHAT TOOLS do we use to develop a database with DW?

I'm using windows DW 2014.1 cc. I'm following lynda.com tutorials to build a website database with PHP and MySQL. I learned I have to download Adobe Extension Mngr to active DATABASE, BINDING, SERVER BEHAVIOR panels, which I've done. BUT NOW I'VE BEEN ADVISED NOT TO USE THESE TOOLS for new development. If this is the truly the case, then WHAT TOOLS DO I USE to develop a website that has a database?

then WHAT TOOLS DO I USE to develop a website that has a database?
Besides the tools you would already need for a system using server behaviors (web server, PHP, MySQL, phpMyAdmin) the only extra tool you need is your own brain.
A lot of people are disappointed by the lack of database tools in DW now, but really it's much better this way. You can never achieve better than a rinky-dink dynamic website using server behaviors. The code Dreamweaver dynamic behaviors create is really terrible. (I'm not insulting the fine folks who wrote the feature. It's just a consequence of automated code.) You can write better, simpler, more maintainable code yourself, and over time you will improve. With server behaviors you cannot improve. you get stuck in database kindergarten.

Which tool i should use to develope a portal

Hi all,
we are planning to develop a portal which we will expose to internet.
Now my question is which tool i should use to develope this
   1.BSP
   2. jspdynpage
   3.Webdynpro java
   4.Webdynpro abap
Which application will perform better on internet.
Lots of rfc calls and webservice calls are there.
plz give me suggestions .
Thanks
developer

Hi,
BSP - Abap workbench
JSP Dynpages - NWDS (Netweaver Dev Studio)
Webdynpro Java - NWDS
Webdynpro ABAP - ABAP Workbench
above all applications will perform at same level depend on the content.
best regards
Hari

Which tool is the best to develop stored procedure?

Hello everyone,
which tool is the best to develop and debug stored procedure in oracle9i/10g?
Thanks

> Now i am using sqlplus to develop procedures. But I can not debug them.
How do you debug??
Bad programmers tend to need and use a debugger a lot.
I learned to program back when you were only allowed 3 compiles and link due to mainframe CPU costs. The 3rd build was the production one. If you could not cut it, you could not become a Programmer. (back then it still carried a lot of meaning and yes, people spoke of Programmers using capitals)
If you need to debug your code regularly, then you have a more serious problem. A problem of not writing PROPER MODULARISED code. A problem of not tackling programming problems LOGICALLY - by reducing the complex problem into a set of smaller problems and solving each of those in turn.
Having to trace code step by step, insert break points, and all that... Debugging must be an exception. If it is not, you must seriously consider your programming techniques and better your design skills. Get back to programming 101 fundamentals.

Very slow turnaround time for development

          Is there any way to speed up the turnaround time for developing J2EE applications
          with pageflows? I make a minor change in my JSP or my JPF and the time it takes
          to build and run again is pretty bad. Don't you guys do any incremental compilation?


          Change in JPF will take time. but in JSP, it's ok.
          "Gerald Nunn" <[email protected]> wrote:
          >"Jim Thomas" <[email protected]> wrote in message news:40b68668$1@mktnews1...
          >> Is there any way to speed up the turnaround time for developing J2EE
          >applications
          >> with pageflows? I make a minor change in my JSP or my JPF and the time
          >it
          >takes
          >> to build and run again is pretty bad. Don't you guys do any incremental
          >compilation?
          >
          >JSPs and JPFs are automatically re-compiled for you when the server is
          >in
          >development mode, no need to do a manual build after changing them.
          >
          >Gerald
          >
          >

Please HELP! = major disk issue - none of OSX "help" tools works (repair/time machine/reinstall)

Hello to all,
My first post, but directly with a very difficult case I suddenly encountered yesterday evening...
When, as usually I opened the lid, it turned on from sleep, as usually, however frozen suddenly... so I did hard turn off... with ON/OFF button. When it turned on again, I had no possibility to put my password, but I was directly faced with "OSX tools" with 4 options (it is in Polish so I try the translation):
1) Recover from Time Machine back up;
2) Install OSX again;
3) Get online help;
4) Disk tool;
I am totally ****** off how this could happen. There was so much stuff on the disk, including the whole Aperture libary with thousends of my daughter photos (she was born a year ago) - priceless stuff.
I would never expect Apple to give me such an "experience"... never heppened to me on any PC's before..
I have 2011 MacBook Pro 13" with Maverics.
This is what I encountered using each of solutions:
1) I use Synology DS209 for Time Machine backup (connected via Lan cable). As far as I remember backup is about 2 months old. Anyway when I choose this option. OSX tool finds the Time Machine in DiskStation, connects to "MacBook Pro" timemachine on the external disk, BUT cannot find any BACKUP further on!!!! I am lost!
2) second, but not preferred option is OSX reinstallation.After initial analysis, and conditions acceptance, I cannot choose the only disk available. I can see only "recovery disk", but when I click on it, there is a message popping up "This disk is blocked". Obviously this prevents any further activities in reinstallation;
3) Third option is BS clearly, no help at all.
4) Disk tool shows me several disks / I am not an expert, so I am not sure how to understand it (Bold is active, standard non active):
- 320,07 GB Hitach HTS54503...
- Macintosh HD
- Superdrive
- disk1
- OS X Base System
I run "check disk" for Hitachi. No problems. Nothing to repair.
I run "check disk" for Macintosh HD => This disk requires repair. So I run "repair". Quickly I get a message "Disk Tool is unable to repair this disk. Please backup as much data as possible, format the disk and recover the files from backup"..... Really????? How can I backup any files???
DEAR COMMUNITY, please HELP!
What to do in order not to loose any data on one hand and on the other be able to use the computer again?
Please note I do not use "recovery CD" all is running without anything in CD/DVD drive.
Thanks in advance for your answers, competence and experience!
Disk tool does not give any solution, showing

You are in a bad situation, because the internal drive has malfunctioned and your only backup is on a device that is not suitable for use with Time Machine, despite what its manufacturer says.
You must try to make another backup now, before you do anything else. It may or may not be possible.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

How can I make the line segment tool repeat several times?

How can I make the line segment tool repeat several times?

If this is what you want, hold the ~ key on your keyboard while dragging with the tool.
If you want spaced copies of the completed line, use the Transform Effects from the Effects menu.

Known Issue: How to Install Visual Studio Tools for Universal Windows App Development (Windows 10 Insider Preview SDK and tools, April 2015 release)

The Visual Studio Tools for Universal Windows App Development are not installed by default. If they are not installed, in the New Project dialog in Visual Studio 2015, you will see only a template “Download Windows Universal Tools”.
For additional known issues with using Visual Studio 2015 RC, see
https://support.microsoft.com/kb/3025133/

Additional Installation Known issues:
Visual Studio Tools for Universal Windows Apps Requires Windows 10 Build 10074 or later
https://social.msdn.microsoft.com/Forums/en-US/de06c7c0-4248-4d68-bfcb-4b9a23fae1c0
You cannot install the Visual Studio Tools for Universal Windows Apps on a pre-RC build of Visual Studio 2015
https://social.msdn.microsoft.com/Forums/en-US/25d0b000-3ebb-4032-a786-99caf0390e9b
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
https://social.msdn.microsoft.com/Forums/en-US/17bc9d5e-2ea7-4149-bb75-23997db8bd25/
Setup warnings for Windows 10 SDK, Emulators for Windows Mobile, and Tools for Windows 10 Universal Apps
https://social.msdn.microsoft.com/Forums/en-US/bfc4fcc0-cb48-4bb0-aab3-5797e31b08e0
Fatal error when installing the Windows emulators: 2147023293
https://social.msdn.microsoft.com/Forums/en-US/5485554c-e7e8-414e-a542-d1f7c0b6291c
Do not install Visual Studio Express 2015 for Windows 10 on a Machine with Visual Studio Community, Professional, or Enterprise
https://social.msdn.microsoft.com/Forums/en-US/94a29b17-baaf-4318-98ff-1cfc90a54bad/
How to enable your Windows 10 device for development
https://social.msdn.microsoft.com/Forums/en-US/6e34c9f0-5e3a-4b44-9aae-586ba94f8a28/

Real-time and Developement System

I have a very premitive question. what is real-time OS? what are differences between real-time and Developement labview.

Real-Time in general is not about speed, it's about guaranteeing, that a specific function will be executed within a specified time window.
Imagine a car with some sort of fieldbus. You want the brakes to be working at any time within a time limit (say, 1ms). That's Real-Time.
Windows for example uses some sort of scheduler to distribute CPU time to the different threads with a granularity of - i think 1 ms. So each thread gets 1 ms, then it is interrupted and the next thread gets its 1 ms. Of course there are priorities which thread gets a little more time (or more "slots") and which thread gets less. BUT: You cannot tell in Windows, that your application will execute in a specified time window - at any time, it can be interrupted and therefore delayed and theres nothing you can do about it.
Real Time OS make sure, that - if some specified event happens - it will be executed within a specified time window.

PSE8 - Stuck on 'Hand Tool' All The Time...

hi, i'm using PSE8, and the 'Hand Tool' is all i get (9 out of 10 times i use the software) i can't choose brush, eye dropper, wand or anything, it's just stuck on the Hand Tool all the time. and i like to use the feature: 'Auto Adjust For Skin Tone' often, but all i get is the Hand Tool. anyway to disable the hand tool, or fix whatever's going on?
thanks, Robin

thanks a bunch! yeah, tapping the the spacebar did the trick!

[svn:sb-natebeck] 7814: Resurrecting mx.graphics. Parser into my sandbox to start on FXG run-time parser development.

Revision: 7814
Author:   [email protected]
Date:     2009-06-12 17:21:14 -0700 (Fri, 12 Jun 2009)
Log Message:
Resurrecting mx.graphics.Parser into my sandbox to start on FXG run-time parser development.
Added Paths:
    flex/sdk/sandbox/natebeck/trunk/frameworks/projects/framework/src/mx/graphics/Parser.as

Revision: 7814
Author:   [email protected]
Date:     2009-06-12 17:21:14 -0700 (Fri, 12 Jun 2009)
Log Message:
Resurrecting mx.graphics.Parser into my sandbox to start on FXG run-time parser development.
Added Paths:
    flex/sdk/sandbox/natebeck/trunk/frameworks/projects/framework/src/mx/graphics/Parser.as

SAP tool to estimate time for web dynpro development project

Hi,
Is there any standard SAP tool available to estimate time for web Dynpro development project?
Thanks and Regards,
Deepti

Hi Deepti
An implementation of Webdynpro based UI could be estimated by a 'standard' technique like any other U:
1. Try to count the number of views/screens/popups in your application. The estimation time will be proportional to the quantity.
2. Try to count the number of external interfaces would be used in the application. For example, quantity of necessary BAPI invocations (RFC), quantity of Web-service invocations or EJB calls. Also quantity of native JDBC queries if any.
Test = Nviews x Hview + Nint x Hint, where Hview & Hint time in hours for average implementing of one UI view and time for adding of average service invocation.
BR, Sergei

Beige G3 with Pro Tools Freezes Every Time I Use PT (why I have the G3)

Please, if anyone can help....
I GOT my beige G3 running which had died and refused to reboot when last I had tried running Pro Tools. I GOT Pro Tools 6.1 reinstalled and running... and then when I was back in Pro Tools again on my newly-running system, I tried to "Save Session Copy" (including saving audio files), it froze. It seems whenever I ask Pro Tools (specifically, haven't had this problem with ANY other memory-intensive program) to do something even mildly memory-intensive, it freezes. Not just the program freezes, the whole computer does. And once again, the computer then refused to reboot. I tried running First Aid and Repair Permissions and so forth booting from the OS X.2 CD. No dice. I erased the 7.8 gig section (the bootable section) of the hard drive. Tried to re-install the OS. It freezes mid-install every time now. Didn't used to freeze (though always bogged down a bit from time to time). Then I tried erasing the WHOLE 120 gig disk (while weeping bitterly) and re-partitioning the 3 sections (as a Mac-person-who-knows-more-than-me instructed me to do- - was the only thing that worked- - the first section being 7.8 gigs) and reinstalling the OS. Still freezes when I try to install. I have to move the mouse around frantically just to keep the computer from freezing while erasing the drive (this actually works- - moving the mouse around).
I tried putting the 3 sticks of ram in different order- - they worked fine before- -the 3 sticks of RAM collectively add up to 600-something- 1 stick of 128 and 2 of 256 or whatever that amount is- - the 2 were originally bought for a "stripped" blue and white I had bought, but the blue and white makes heinous buzz-beeping sounds when I tried to run it most recently, though it worked for a while before. Also, the beige worked fine before with these same sticks of RAM installed, but this seemed maybe memory-related so I thought I'd experiment...?
Anyway, I have A LOT of extras plugged into this thing. The one that acts the most buggy is the TDK DVD-R drive I installed a couple years ago. The model is "Indi" something or other as I recall. It has always consistently done this weird thing where, after booting the computer, if you eject one disk (it will only eject if you drag to the trash) and insert a second disk (since booting), it will not allow you to eject the 2nd disk until you reboot again. If you drag that 2nd disk to the trash, the CD icon disappears from the desktop as though it's been ejected, but the drive does not physically eject. I just put up with it, because I could deal and there had been so many other issues, and everything was working, this seemed like a non-issue by comparison.
I am also running a PC monitor via a small adapter (not a card). I have a USB PCI card going (which the mouse is plugged into)- never had a problem, but now sometimes the mouse freezes on startup too and won't move and I have to force-power-down with that button on the front as if it didn't boot properly. I have an Audio Media III PCI card in there (for Pro Tools). I have the monitor card in there, but don't need it for this machine. Was trying to test if it worked-- last I tested, it didn't-- I should obviously just pull it out.
Anyway, I'm having a ** of a time getting the OS back on there, and even if I do, once I put Pro Tools back on (the point of doing all of this and using the machine at all), it will likely freeze again and I'll be right back where I am right now. If I can even get there in the first place.
Please please please help...
Blue and White G3 Mac OS X (10.2.x)

Conventional wisdom for installing 10.2 Jaguar is to strip the machine back to the minimum Apple might have shipped in it, Install the OS, then add your extras back in.
Memory seems to be a big issue -- I suggest you use the free DIMM First Aid under Mac OS 9 to scan your DIMMs and be sure they are OK for your Mac, and not too slow:
http://www.mactcp.org.nz/dimmfirstaid.html
I have found 10.3 Panther much simpler and more pleasant to install (even if you had to use XPostFacto 3.1 to do it) than 10.2 Jaguar ever was.

Running more than one report at a time using Developer Suite 10g(10.2.1.0)

Hi all,
We are using the Developer suite 10g(10.2.1.0). I'm finding it exciting to work with it. I'm facing the problem with report server. For example I'm trying to run two reports at a time from two different locations, the report server starts working on first report and the second report will be in queue. In 6i it was not the case. so i need such a scenario. where in the two users can take the reports concurrently instead of this FIFO method.
Regards,
Alok Dubey
Edited by: Alok Dubey on Dec 15, 2008 5:22 PM

Hello,
By default, the reports server is configured with 2 kinds of engines :
The default reports engine and the "URL engine" :
For more details about the "URL engine " :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1007633
3.5 Configuring the URL Engine
Thie "URL engine" has a minEngine=0 and maxIdle=30 :
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>
It means that if the "URL engine" is not used, it will be stopped after 30 minutes.
That's why you can see 2 engines just after having started the reports server and only 1 engine 30 minutes later
Regards

How to populate LOV at run time in developer

I want to populate my LOV with with say
SELECT NAME FROM MY_TABLE
Also I have text item in my developer form I want to display this item depending upon the result of my query i.e If have ten record this text item would show ten records and if have eleven records then it shows eleven text_items..
i.e
text_item1 shows first record
text_item2 shows second record
and so on.
I have placed only on text item could its size increase at run time.
Thanks.

at the rendered property you could use something like
rendered="#{bindings.comboBox.inputValue eq null? false : true }"So the first time you come on your page, the table won't be rendered.
When you select a value from you combo box, the view criteria will do his work and the rendered property will be set to true.

Tools to diminish time of development

Similar Messages

Maybe you are looking for