Top Ten Transactions in ST03N

Hi Friends,
I wanted to find the response time for the top 10 transactions in sto3n, I went to the Transaction profile and into the standard option
There it shows me a list of transactions, should I look at the columns total response time (s) or the average reponse time/dialog step (ms)
Can someone guide me on this...
Thanks
Aliila

Hi Aliila,
If want to see top ten transaction in a particular time interval then go to ST03 ,on the left hand side below worload there will be detailed analysis click it to open the list inside it then choose last minute load and specify the time interval after that click the green tick mark to get the result . On the left hand side you will see Analysis Views below that there will be Transaction Profile tab just click it to open the elements inside it and finally double click the standard. You will see the list of all the transaction runned in that interval then based on ur required for example to get the top 10 transaction on dialog response time you can sort that coloumn in desending order to get the desired result or to get the top 10 transaction based on total response time sort the total response time coloumn in desending order..
To check the performance check Average Response time (ms)
Dialog response time for a particular transaction should be less than 1200(ms) if it is crossing 2000(ms) then check where it is consuming the max time it may be CPU time DB response time etc.if it is a Z report than you have to tune that report.
Regards,
Prashant
Edited by: Prashant Shukla on Oct 13, 2008 10:45 AM
Edited by: Prashant Shukla on Oct 13, 2008 10:46 AM

Similar Messages

How to find the top ten reports consuming the high response times in st03n?

HI Basis Gurus,
Please could anybody tell me "How can one find the top ten high response time consuming reports in st03n transaction or in is there any other way to find out this.Please help me its urgent....
Advance thanks....

hi Meghadoot,
below is an example for your request.
ST03N
Expert mode
Server name - Day- double clicdk Today
In analysis view - Ranking lists-double click Top Response time
Regards

How to find out the top ten Change log tables in BW

I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
Regards,
Prashant M J

Hi,
Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
If you wana see the requests in this change log use rstsodsrequest
and if you wana see the size in terms of kb, mb DB02 or st04
use the table name /bic* and click on tables and indexes option in history tab
DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
Thanks and regards
Kiran

ITunes app not loading top tens

The iTunes app on my iPhone4 doesn't load the top tens properly. When I click on More Top Tens it goes back to the main page.
Anyone else found this issue?

Actually its fixed...no idea when or how.

Top 10 transactions in terms of dialog steps

Hi,
I have a client that I need to compare their top 10 transactions in terms of dialog steps to the SAP average. I don't know where to go to get that average. I know not all systems are the same and I also know this is pretty much an impossible task. Is there some place where averages for different configurations might be posted?

Hi ,
Well, if they asked you to fly to Mars what would you tell them? Olivier is exactly right...not only is this an impossible task -- such an "average" simply does not exist -- but any such average would have absolutely no meaning.
What you need to come up with is a graceful explanation of the fact that they do not understand what they are asking in the first place. I have been a consultant before and still talk to customers on a regular basis, so I understand that this may not be the easiest task. However, it is much easier that what they are asking for in the first place! Your best route will be to educate them. In the long run they will respect you more for it.
Best Regards,
Matt

On my iPad2, the buttons for Top Ten, Genres and New Releases are missing. How do I get them back.

On my iPad2, the buttons for Top Ten, Genres and New Releases are missing. How do I get them back.

If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
* Go to "View > Toolbars" and check-mark "Menu Bar" with a click if you want to make that permanent
See [[Menu bar is missing]]

My top ten requested features for Flash Catalyst Next

Here is my top ten list of requested features for Flash Catalyst:
10. Rearranging of pages / states in the pages / states panel (also resizing to smaller icons)
9. Menu bar option to Insert Custom / Generic Component. There isn't a way to create a custom component without first adding something to stage and then converting that.
8. Edit component on double click in layers panel
7. Replace existing artwork with library component - for example, when you create a button or text input then you should be able to use that skin in all of the text input instances rather than creating new ones every time you choose convert artwork to component
6. Artboard sized to content - no hardcoded size of the project
5. Import of Flex Components / movieclps
4. Flex Capacitor library integration / support - supports deep linking and navigation through your flash catalyst or flex project without coding - all the work is done
3. Integration and coexistence in native Flex project - no fxpl or zip - flat file structure
2. Container support - VGroup HGroup Skinnable Container - set layout property
1. Component Constraints support - top left bottom right horizontal center vertical center baseline width height 100%

Additional features:
• When opening a Illustrator file the option to choose which artboard or layers to import (rather than the whole project).
• Set a default option so that all imported text fields from Illustrator use "Fit Height". Mainly because currently it is cutting off the descent but also bc it allows you to change the text content (globalization) and have the text fit.
• Show intersection lines while dragging. At least vertical center and horizontal center... similar to Flex and Illustrator.
• Add a convert to vector when selecting images.
• In the code view the default directory "components" could be renamed to something like: design, compositions, construction, architecture, form, embodiments, chassis, constitution, frame, representation, manifestation, cast, expression, mold, etc. just not skins. design, chassis, representations, cast, expressions, compositions are my favorites. It would be nice to be able to define this folder path in preferences.
• Use the layer name to name the library components. Otherwise there is a directory with 30 assets named "graphic[n]".
• Command to clean out library of unused symbols.

The Top Ten things that BB needs to fix now

BB Fans after having my BB Classic for nearly a month, I am disappointed that there are several issues that need to be resolved immediately with OS 10. I have started a Top Ten list of issues and features that need to be addressed immediately. Please chime in as many of you have the same issues or know of some that I haven't discovered yet. Now here are my Top Ten:
1. Unable to a complete Synch with BB Link, according to BB tech support the issue comes from pictures that are attached to a contact or a Linked In account. We didn't have this issue with BB OS7.
2. Unable to attach a contact to a text message, error shows contact acnnot be shared.
3. Unable to attach a contact to an e-mail, error shows contact cannot be shared.
4. BB Protect doesn't back up and restore as it did in OS7.
5. BB Protect doesn't locate, display a message or play a sound when you are roaming on another network as it did in OS7. It will only locate on your home network, but it won't perform the other features as it did in OS7.
6. When you search for an e-mail, it takes over 10 seconds and it replys "no results". Go to web based e-mail account and perform the same search and the e-mail is found in seconds. OS7 did this well.
7. BB tech support needs to get better, but part of the problem is that they don't have solutions for our concerns.
8. You cannot forward part of a conversion, it will only forward the complete conversation.
9. You cannot bcc yourself to enable you to keep a copy of an e-mail.
10. an e-mail icon needs to be seperate from hub as text messages are, because it takes to long to get to e-mails when accessing them from the hub.
Please everyone chime in as we need to develop a list of our Top Ten issues and features that we desire in our BB10 devices. BB should listen to us as many of us are loyal to BB nd want to see BB survive, improve and grow.

Hi, rwb007,
A few thoughts ...
8. You cannot forward part of a conversion, it will only forward the complete conversation.
True, however copy and paste works: http://docs.blackberry.com/en/smartphone_users/deliverables/67769/mba1343759181682.jsp
9. You cannot bcc yourself to enable you to keep a copy of an e-mail.
How to do this:
a. Compose a new e-mail.
b. Tap the menu icon (three dots) at the lowest right corner
c Tap Add Bcc:
10. an e-mail icon needs to be seperate from hub as text messages are, because it takes to long to get to e-mails when accessing them from the hub.
Remember, you can always select the e-mail account on the Hub, so only that e-mail account's messages are displayed. That said, I'm with you on this one - would be nice to have the option, at least - to add an icon to the main screen for separate e-mail accounts as we had on the 9900/OS 7, although I can hear folks reminding me that also defeats the purpose of the Hub. The simplified Hub design leaves me tapping a lot on the glass to separate which account's e-mails I wish to review as sometimes I find it confusing that all e-mails are mixed together in one long list.
Kind regards,
OBBG

Sum and top ten records

I can get the top ten records with this command.
select amt,rank() over (order by qater desc) as qtr
from table1 where rownum<=10;
Now I want to get the sum(amt) in similar query and it is giving problem. How can I do it?
Thank You.

I don't think that query does what you think it does. It's a side effect of the analytic window function implementation that you are relying on there. You should really change that to a subquery. When you do that, getting the sum is more obvious ...
select amt, qtr, sum(amt) over ()
from (
select amt, rank() over (order by qater desc) as qtr
from table1)
where qtr <= 10

My already purchased, downloaded, and stored album or song in the Music from iTunes Store does not display already purchased in New Releases, Top Tens, Genres. Why did I purchase this again from the same album??

This has happened more than 38 times so far, and its still not fixed within iTunes store, upgrade or the latest version of software. For an example, I have in the Top Tens, section Country number 28 this week Keith Urban with For You from the Act of Valor movie soundtrack which displays $ 1.29. Now again upon just searching on the iPhone 4s with the app Itunes, with the keywords Act of Valor, top results show on display Action & Adventure Act of Valor Movie and Keith Urban, For You Act of Valor $ 1.29.
Now right below with Albums, Various Artists, Act of Valor I selected it displays 1 For You "Downloaded"
Pretty screwed up if you ask me!!

really? no answer in a month? no one can help to resolve with a setting ?

Trying To Create A Top Ten List Table

Dear iWorks Numbers Experts,
I'm having a heck of a time trying to make a numbers Top Ten Table. Here's what I have so far, and it pretty much works except for one problem.
Data Table:
Col A Col B
Apple 53
Banana 24
Grape 42
Orange 64
Pear 53
Etc Etc
Pretend Top Three List:
1. =Lookup(Large(Col B from data table),1), (Col B from data table), (Col A from data table)
Returns:: Orange
2. =Lookup(Large(Col B from data table),2), (Col B from data table), (Col A from data table)
Returns:: Pear
3. =Lookup(Large(Col B from data table),3), (Col B from data table), (Col A from data table)
Also returns pear instead of apple
So I'm making a top ten list based on the number of votes in one column and the "fruit" in the first column. The problem is if two of the data points have an equal number of votes, the top ten list returns the same fruit for every tied vote, instead of naming all the fruits that have the same number of votes.
How do I change the formula to make a Top Ten list without repeats?

slants,
Here's a solution that I don't believe is any better than Yvan's, but since I had started on it and since it represents an alternate approach that is somewhat like your first direction, I'll give it to you.
The Data table contains a hidden Column C with the conventional rank expression, slightly modified to eliminate duplicates: =IF(ISBLANK(B), "", RANK(B, B)+RAND()/1000)
Column C is hidden to avoid inadvertently typing over the equation. The "+RAND()/1000" part of the expression adds a very small random offset to avoid duplicates. The use of this method of avoiding duplicates means that you will not be able to predict which of several tie scores will be presented first, but that's not usually a problem.
The bottom table, "Product ArrangedByRank", is locked to avoid corruption, and can be any length to present however many top items you wish. Here again, I don't believe there is any reason to show the rank column, but I left it visible. Rank in the bottom table puts the Rank data from the top table in numerical order via the LARGE function. In Rank we have: =IF(COUNTA(Data :: A)<ROW(), "", LARGE(INDIRECT("Data :: C$2:C$"&COUNT(Data :: C)+1), COUNT(Data :: C)-ROW()+2))
All that counting business is to avoid errors in the case where the tables are of unequal length and where there are empty rows at the bottom of the top table.
The bottom table Product expression is: =IF(COUNTA(Data :: A)<ROW(), "", LOOKUP(C,Data :: C,Data :: A))
And, the bottom table Quantity expression is: =IF(COUNTA(Data :: A)<ROW(), "", LOOKUP(C,Data :: C,Data :: B))
I hope that this along with Yvan's solution will help you.
Jerry

Need to display average percent of spend for each vendor in top ten

Hi Friends,
             I have to design a query where I need to display top ten vendors and for that top ten vendors need to sum the AMT and I have to calculate the average percentage of each vendor in top ten list from the total. Based and the specified range have to create exceptions.
I am able to display top ten vendors. Now the problem is unable to calculate total of top ten vendors and average percentage of each vendor from total. like the below
     spend     Spend Ratio     Spend Percentage
vendor 4     121987     0.299181333     30%     80% is an A
vendor 10     101103     0.247961917     55%
vendor 8     98723     0.242124806     79%
vendor 9     23456     0.05752742     85%     80-95% is a B
vendor 5     12345     0.030276944     88%
vendor 6     10540     0.02585006     90%
vendor 7     9906     0.024295132     93%
vendor 3      9903     0.024287774     95%     95-100% is a C
vendor 2     9899     0.024277964     98%
vendor 1     9874     0.02421665     100%
Total     407736
Please, suggest me to proceed further.
Thank You.
Manjula

Hi manjula
In order to get total for any key figure .... for that key figure at the query level in the calculation tab there will be one box like calculate result as there u give sum or average accroding to ur purpose... then it will display the total or average accordingly....
the key figure when used average for result shows average of all record conrtibutions but
In order to display the percentage of each vendor from total u can use
Percentage Share of Result (%CT)
%CT<Operand>
Specifies how high the percentage share is in relation to the result. The result
means the result of aggregation at the next level (interim result).
%CT Incoming Orders specifies the share of incoming order values of each
individual characteristic value (for example of each customer) in relation to
the characteristic's result (for example, customer of a division).
Regards
vamsi

"Top Ten" Table

Post Author: KC3
CA Forum: Desktop Intelligence Reporting
I would like to create a "Top Ten" rows based on a Hours column in my table. I'm using Business Objects 6.5.1
My results are based off a date range that supervisors change frequently. This is probably an easy one.

slants,
Here's a solution that I don't believe is any better than Yvan's, but since I had started on it and since it represents an alternate approach that is somewhat like your first direction, I'll give it to you.
The Data table contains a hidden Column C with the conventional rank expression, slightly modified to eliminate duplicates: =IF(ISBLANK(B), "", RANK(B, B)+RAND()/1000)
Column C is hidden to avoid inadvertently typing over the equation. The "+RAND()/1000" part of the expression adds a very small random offset to avoid duplicates. The use of this method of avoiding duplicates means that you will not be able to predict which of several tie scores will be presented first, but that's not usually a problem.
The bottom table, "Product ArrangedByRank", is locked to avoid corruption, and can be any length to present however many top items you wish. Here again, I don't believe there is any reason to show the rank column, but I left it visible. Rank in the bottom table puts the Rank data from the top table in numerical order via the LARGE function. In Rank we have: =IF(COUNTA(Data :: A)<ROW(), "", LARGE(INDIRECT("Data :: C$2:C$"&COUNT(Data :: C)+1), COUNT(Data :: C)-ROW()+2))
All that counting business is to avoid errors in the case where the tables are of unequal length and where there are empty rows at the bottom of the top table.
The bottom table Product expression is: =IF(COUNTA(Data :: A)<ROW(), "", LOOKUP(C,Data :: C,Data :: A))
And, the bottom table Quantity expression is: =IF(COUNTA(Data :: A)<ROW(), "", LOOKUP(C,Data :: C,Data :: B))
I hope that this along with Yvan's solution will help you.
Jerry

Creating a "top ten" list in Endeca

Hi all,
I'm working on a project now and the client wants Endeca to return a list of data that's been dubbed "top ten best selling".
How can I make this happen?

- If it is random "10" products, one approach is to tag those 10 products with a particular dimension value. Say "top 10" and filter on that dimension for display.
- If it is to give priority to top selling products in any search results, then approach can be through relevancy rank. A "static" module on a property wich has the sale quantity of the products and do appropriate sorting on the module

Duplicated transactions in ST03N transaction profile

Hello.
I've found duplicated transactions in the transaction profile list , in ST03N.
Does anybody know if this is a bug? This is a 4.6C SAP R/3 system.
If not a bug, why the transaction is reported twice with different number of steps, response time, etc... ?
Thanks a lot, kind regards,
Dino

Sorry, I was not clear explaining my question.
I'm using ST03N , and I'm watching the Transaction Profile list.
In this list there are few transactions which appear twice, in two separate rows, as they had different names, but it is exactly the same transaction. The number of steps and the response time infos are different in the two rows.
I thought that the reason could be that the transaction was changed by a transport, but this is not the case.
I would like to know if anyone else has met the same behaviour and eventually knows the reason.
Thanks a lot, kind regards,
Dino

Top Ten Transactions in ST03N

Similar Messages

Maybe you are looking for