Topology Services Applet error: "No JRE found in configuration file."

Is there an issue with IE7 and opening up Topology Services? Or can someone guide me in fixing this error message?
I'm using LMS 3.1 and had uninstalled all of my Java versions and installed jre-6u5-windows-i586-p_withjacorb.exe on my client. However, when I clicked the Topology Services link I would get the Java splash window for a bit and then nothing happened (the next two applet windows wouldn't load).
When I tried to launch Topology Services from another box using IE6, everything worked fine. I tried the same steps above on another box with IE 7 and that worked fine too.
So I tried a few installs and uninstalls of different Java versions and found that if the version was other than 6_5, I'd get the Java splash screen with the first applet window telling me I had the wrong version. When I'd uninstall all Java versions again, reboot, then install the correct Java version, I wouldn't get anything past the first Java splash screen. After a few attempts at this, I now receive the following error when I click on Topology Services, "Bad installation. No JRE found in configuration file."
How can I get to this configuration file on my client to let it know that I do indeed have the right version of Java on my box?
--Jeff

Campus 5.1 works just fine with IE 7.0 and JRE 1.6.0_5. It sounds like this particular client may be in bad shape. Typically, I recommend one uninstall all versions of Java from a client, reboot, then install the one version that comes with LMS. I also recommend that for IE, one adds the LMS server as a Trusted Site in IE. You might also try disabling anti-virus software temporarily to see if that helps.
For Campus 5.1, you will also need to open TCP ports 42342 and 43242 from client to server.
It may be that this client is in such bad shape that it will need to be rebuilt to get Java working correctly.

Similar Messages

Error "JRE not in Configuration File"

I have made sure my browser is Java activated that that all issues in the FAQ are done. I can not find JAVA in my control panel and when I manually execute the java file, I get the error "JRE not in Configuration File." I found some errors in my registry file using regedit. JavaSoft did not have the proper permissions. I added the permissions and now after executing the java 1.4.2_05 file I get the that error when I open the coffee cup. Is something else missing in my registry.

This thread should help.

XML Parsing Error: no element found Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/chrome/toolkit.jar!/content/global/netError.xhtml Line Number 1, Column 1:

Accidentally clicked on "Allow for Safe Networks Only" and saved it. When launching Firefox, this error: XML Parsing Error: no element found
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/chrome/toolkit.jar!/content/global/netError.xhtml
Line Number 1, Column 1:
I have uninstalled and reinstalled, changed to a new profile, nothing works. I have looked at Options - Network - No Proxy
Please help as I love Firefox

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

ServletRunnerInfo not found in configuration file

I'm getting the following error message
ServletRunnerInfo not found in configuration file
for a servlet that I've never changed. The servlet was written by another developer sometime last year and it seems to have stopped working correctly over a month ago.
I've checked the XML files and both have entries for the servlet. Anyone have an idea of how to resolve this?

Sounds like an init parameter definition might be missing from the within this servlets definition in the web.xml file. Might need something like:
<init-param>
<param-name>ServletRunnerInfo</param-name>
<param-value>Something or other config information</param-value>
</init-param>You could tell if the init() method of the actual servlet asks for:
config.getInitParameter("ServletRunnerInfo"));Then that is the problem for sure. Otherwise ... ????

Requested node not found in configuration file

The following warning appears when I instantiate the ReportClientDocument object:
[main] WARN com.businessobjects.reports.sdk.JRCCommunicationAdapter - Requested node not found in configuration file
This looks to me like a configuration issue. How can I get rid of it?

Please read the rules of engagement and add all of the missing info. I'm assuming you are developing in Java so moved your post to the Java forum.

Output Designer 5.7 Errors - Error 1804 Unable to open configuration file

Hi...Receiving error messages on accessing newly installed Output Designer 5.7. Installed on new Win7 laptop.
Error # 5903 - You must select a Printer before saving.
Error # 1804 - Unable to open configuration file "....\Config\PDF.ICF"
The last error, Error # 1804, closes out the application. File does not exist within the path. Tried uninstalling and reinstalling with the same result.
Any help would be greatly appreciated!
Thanks,
Elena.

Hi Elena
This is most likely caused by missing admin rights on Win 7. I have seen this problem within my company.
When installing Adobe Output Designer it will be placed in %ProgramFiles% which is your C:\Program Files folder.
In subfolder C:\Program Files\Adobe\Output Designer 5.7\Config there are many configuration files that controls your printer drivers (Presentment targets). Dependent on what user type you are in Win 7 you might not have write access to files in this folder. When you cannot write to this folder you cannot make changes to your printer drivers or install new ones and you are pretty much stuck.
Solution: Create folder C:\MyPrograms and install Adobe Output Designer here.
Ståle

Web services Access Error: 404 -- Not Found

I'm going through the web service example on the help menu. The vi is built exactly as required and the deployment works. Labview is running and the vi is open, but when i start up firefox and go to the url, i get the error "Access Error: 404 -- Not Found". Any ideas? Thanks.

Hi Pojoaque,
Thanks for the update. Which example is called add?
Maybe its the address book example, if so, please see this KnowledgeBase article with a known issue with this example - also please double check your configuration of LabVIEW.
In the VIs you create yourself what are you trying to do?
Why Does the Address Book RESTful Web Service Project Found in the LabVIEW 8.6 Example Finder Not Work?
http://digital.ni.com/public.nsf/allkb/A8830F04188D2835862574AA0059055E?OpenDocument
If its the VI itself which does work - have you checked your LabVIEW configuration allows access to the webserver for all vis?
Hope this helps,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Error WUC-5 No WebUtil configuration file specified

hi all
suddenly i got the following error in my java console i google and did not find the solution.
Did someone face the same problem ever?
please help me out thanks in advance.
Loading http://xp:8889/forms90/java/frmwebutil.jar from JAR cache
Loading http://xp:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Loading http://xp:8889/forms90/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
2010-Apr-15 18:52:30.406 ERROR>WUC-5 [WebUtil_Core.PopulatePropertyBundle] No WebUtil configuration file specified
Exception occurred during event dispatching:
java.lang.UnsatisfiedLinkError: no jacob in java.library.path
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at com.jacob.com.Dispatch.<clinit>(Dispatch.java:537)
     at oracle.forms.webutil.ole.OleFunctions.create_obj(OleFunctions.java:398)
     at oracle.forms.webutil.ole.OleFunctions.getProperty(OleFunctions.java:189)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)Form 10G R1.
i found this.
Re: WUC-5 error
sarah

done thank for everyone.
i modified webutil.cfg and modified the class-path(default.env)

Web Service Proxy error: "No operation found using soap keys"

I'm trying to use the new tools, and having a little trouble. Not many results when searching for this error message.
I have developed and deployed a new Java web service proxy using the outside-in approach according to the [help docs|http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/7f2fef88190ad3e10000000a11466f/frameset.htm] (PI 7.1 SP07, NWDS 7.1 CE SP09 PAT0000). Started with a Service interface in ESR, then generated a java bean skeleton into a new EJB project in NWDS, then wrote business logic and deployed.
When I test the web service (with 3 different SOAP test clients) I get the same error, below:
     <faultstring>com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException:
No operation found using soap keys [], [spmat_jdbc_receiver_proxy]. InterfaceMapping Object class:
com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_ProxyBinding, BindingType=Soap, PortTypeQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_Proxy, JAXWSInterface=true, InterfaceMappingID=-
27e4d529:127632b5c52:-7ebb}.</faultstring>
My service endpoint interface looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@javax.jws.WebService(name = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100")
@javax.jws.soap.SOAPBinding(parameterStyle = javax.jws.soap.SOAPBinding.ParameterStyle.BARE, style = javax.jws.soap.SOAPBinding.Style.DOCUMENT, use = javax.jws.soap.SOAPBinding.Use.LITERAL)
public interface SIISyncSPMATJDBCReceiverProxy {
@javax.jws.WebMethod(operationName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", action = "http://sap.com/xi/WebService/soap1.1")
@javax.jws.WebResult(name = "spmat_jdbc_receiver_proxy_response", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy_response")
public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(@javax.jws.WebParam(name = "spmat_jdbc_receiver_proxy", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy") generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy);

(continued from above post)
And my implementation bean looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@SessionHandlingDT(enableSession = false)
@AuthenticationDT(authenticationLevel = AuthenticationEnumsAuthenticationLevel.BASIC)
@TransportGuaranteeDT(level = TransportGuaranteeEnumsLevel.NONE)
@WebService(serviceName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Service", portName
= "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", endpointInterface
= "nexeninc.pi.ll.spmat._100.SIISyncSPMATJDBCReceiverProxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100", wsdlLocation
= "META-
INF/wsdl/nexeninc/pi/ll/spmat/_100/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy.wsdl")
@Stateless
public class SIISyncSPMATJDBCReceiverProxyImplBean {
     @RelMessagingNW05DTOperation(enableWSRM = false)
     public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(
               generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy) {
          System.out.println("Starting siISyncSPMATJDBCReceiverProxy.");
When we first created the new endpoint in NWA, we tried asigning a new name for both "Service Endpoint Name" and "In New Service", and we received this error.
We then deleted the endpoint and created another new one, setting "Service Endpoint Name" to match the portName in the implementation bean: "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", but that didn't work either. The only option we enabled in the endpoint was HTTP authentication: User ID/Password.
My ejb-j2ee-engine.xml and application-j2ee-engine.xml are both empty (but they exist).
I am new to EJBs and JAX-WS so hopefully it's something simple. All help appreciated!
Apologies for the long (and wide) post.
- Rob

Service Desk: error in Sent to SAP configuration

Hi All,
I am trying to confugure Send to SAP option in service desk solution manger 7.0 SPS 17.
I am following SAP Note 1247502 for the same. But at the 3rd step i stucked as i am not getting method AISDK_SP_SEND_SAP in our solution manager system.
3. Call transaction SE19. Select 'Classic BAdI'. In the 'Implementation'field, enter AI_SDK_SP_PPF . Under 'Defined filters', add the method AISDK_SP_SEND_SAP and save this.
Can anyone please help me out in this.
Thanks,
Bhanu Pratap Singh

Bhanu,
Have you completed first two steps? Because 3rd step is dependent of first 2 steps.
You have to deactive this BAdI - AI_SDK_SP_PPF implementation as per step 2.
Then only you can able to add the method AISDK_SP_SEND_SAP as per step 3rd step.
You have activate the BAdI- AI_SDK_SP_PPF implementation again after adding this AISDK_SP_SEND_SAP method.
I followed these steps. I was able to add the method AISDK_SP_SEND_SAP .
Regards,
Sanjai

ServletRunnerInfo not found in configuration file for ABCServlet

Hello,
I have created an iplanet web application which contains 2 servlets and some
JSP files at Visual Cafe. After I deployed the web application war file at
the iplanet server and run the site, I can access the first servlet without
any problem, but encounter the above exception when come to the second one.
Do anyone here knows the reason and the solution for that?
Thanks.
Fred Wong

You didn't use the same GUID for both servlets did you?
Fred Wong wrote:
Hello,
I have created an iplanet web application which contains 2 servlets and some
JSP files at Visual Cafe. After I deployed the web application war file at
the iplanet server and run the site, I can access the first servlet without
any problem, but encounter the above exception when come to the second one.
Do anyone here knows the reason and the solution for that?
Thanks.
Fred Wong--
Consulting Project Engineer
iPlanet Professional Services - ANZ
iPlanet e-commerce Solutions
- A Sun|Netscape Alliance
Sun Microsystems Australia Pty Ltd

PortalExceptionImpl: Portal node DEFAULT_PORTAL not found in configuration file

I am attempting to write a wwjps.xml file so that I can use my external JPS with portal tags and components.
I am getting the above exception, and have no idea what it is trying to tell me. The "Integrating JavaServer Pages with
9iAS Portal" doc makes no mention of a DEFAULT_PORTAL - only says that if I wish to make one of my specified portals
the default that I use the default="true" attribute in my <PORTAL> tag.
What am I missing?
Thanks,
Gordon

Please read the rules of engagement and add all of the missing info. I'm assuming you are developing in Java so moved your post to the Java forum.

Error during accessing VC - Storyboard configuration file

Hi.
When I try to use VC on my desktop (winXP sp2 - Internet Explorer browser v.6.0.2900.2180 sp2) show me a popup with the following message:
"bad or missing storyboard configuration file ( studio.ini)"
If I try to use Firefox (latest release) I have only a black page.
Please help me.
Thanks.
Alex

Hi Alex,
Keep using IE and as Prachi Bijlani said try to download Adobe SVG Viewer from
http://www.adobe.com/svg/viewer/install/
Regards,
Gilson

Telnet from topology services

hello
we are upgrading from CW LMS 2.6 to 3.2
we found that in this version we are not able to telnet to devices from topology services
in this link
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp54971
i found this bug : CSCsh49922
i think this is our case.
they give only the solution for Windows XP client systems with Internet Explorer 7 browser. the solution works but
is there any other solution if i am using Windows server 2003 with IE 8 (i am telnetting from the server itself).
actually i permit telnet to devices only from ciscoworks machine (acl).
i tried firefox with windows server 2003 but it was not successfull

You should uninstall all versions of the JPI, then try and launch Topology Services from the server. You will then get a page which has a link to download JPI 1.6.0_11 from the server itself. Download, and install this plug-in as the local Administrator. Then, relaunch your browser, and relaunch Topology Services. You should see some additional jar files installed. At this point, you can switch from local Administrator to your actual user, and Campus should work. Telnet should aslo work provided you have the telnet.exe binary installed on the system.

Topology Services etherchannel link was discovered as separte links

I'm currently using Campus Manager 4.0.3. Topology services have error in dicovering links, some etherchannel links was discovered correctly some are discovered as separate links. For the incorrectly discovered etherchannel links, it created a bus as a connection to the other devices instead of dispalying it as a single link with multiple port in the link attributes. I already trien re-initializing the Ani Database and i also upgraded the CM to 4.0.5. But still no avail.
Need help asap. thnaks.

Any chance you are passing through a non-Cisco L2 switch on those links? I've seen this behavior is that case,

Topology Services Applet error: "No JRE found in configuration file."

Similar Messages

Maybe you are looking for