Total Credit Limit exceeded, but orders are still credit approved

Hello,
I'm encountering the following issue for one customer:
Total credit limit - $100,000
Individual limit - $80,000
The customer has two credit control areas. For credit control area 1 (CCA1):
Credit Limit - $80,000
Credit Exposure - $110,000 (i.e. credit exposure exceeds credit limit for not only CCA1, but for the entire customer credit limit)
For credit control area 2 (CCA2):
Credit Limit - $20,000
Credit Exposure - $10,000 (i.e. credit exposure does not exceeds credit limit for the CCA2, but entire credit limit is still exceeded)
When I enter a sales order in credit control area 2 for this customer, the credit status is approved, even though the total customer credit limit has been exceeded. I am wondering if this is standard SAP behavior. If so, what's the point of a total credit limit if it doesn't reject an order where the total credit exposure exceeds the total credit limit?
Risk category and all other config for the credit control areas match in OVA8. If this is standard behavior, or if there is a configuration element turned off that should be turned on, I would greatly appreciate the help. Thank you in advance.

Hi,
Pls check if the risk category is assigned in FD32 and the relevant combination exist in "Define Automatic Credit Control".
Thanks,
Mauryan
Edited by: Mauryan on Apr 25, 2011 5:22 PM

Similar Messages

Static credit check: credit limit exceeded for consignment issue delivery

Hi,
We are encountering a credit limit exceeded error in delivery creation for a consignment issue.
In SPRO config "Credit limit check for order types", no credit limit check is assigned to the order type. However, there is one assigned for the delivery type. Also, for CCAr/Risk cat./CG combination in OVA8 (Auto Credit Block Delivery), static credit check has been activated with error message reaction. Open orders and open deliveries were also activated. Customer exceeded credit exposure but user cannot release the order in any VKMx transactions as no credit limit check is assigned to the order type.
Given that this is the current setup, and the following conditions:
1. Credit limit for the customer cannot be increased
2. Oldest open item cannot be cleared just yet
Is there any way that we can proceed with delivery creation for this customer? The other order types have credit limit check so credit management team was able to release them. However, we are unsure on how to proceed with this consignment order. Kindly advise and thank you in advance for your help.

We are encountering a credit limit exceeded error in delivery creation for a consignment issue.
but user cannot release the order in any VKMx transactions as no credit limit check is assigned to the order type.
Looks contradictory and it may need to run report RVKRED77 to reorganization of open credit values. Try to run the report in test system and then run in production system. After running the report, the use must be able to release in VKM* transaction.
Regards,

Both Credit Limit and L/C are not working in Sales Order

Dear All,
We are working on Export scenario where order are created based on L/C and Credit Limit. In my scenario both credit Limit and L/C check is not happening please suggest.
I have created a sales order with value is 1024.00 INR. (My Credit Price is 1024.00 INR)
Customer credit Limit is 50.00 INR. (In FD32)
My L/C value is 1000.00 INR (In VX11N).
I have Implemented Dynamic Check and Assigned L/C to Sales Order. During Order process system blocking the order through Dynamic check. As per the above value System should not block the order. But System blocking the order. When I check Header -> Billing -> Financial Document Log, System showing the value update error. Its comparing entire Netvalue of the Order(1024) with L/C value (1000). How it is possible.
My requirement is system should consider both Credit Limit and L/C value. Please suggest.
Thansk & Regards

No reply received from any body. But there is limit to post the questions to post another one. I am closing this.
Thanks & Regards

Payment term in the sales order & credit limit exceed.

Dear Guru,
Problem 1:
1. In the sales order, there are 3 lines items. As per there requirement each line item they want enter diffrent payment term.
for example
        Material code                                              Payment terms
1.      Fixed                                                               z045
2.     Variable                                                           z030
3.    Pipes                                                                 z015
how you can archive this goal. In customer master payment term is maintained only one. Please suggest me.
Problem 2:
1. Credit managment, If the credit block is there in the sales order(Due to credit limit exceed) order confirmation is no goes to customer.
how we can archive this goal by using the standard functionality.

Hi,
1. You can achieve it through manual entries
If you have 3 line item then at item level >> Billing document maintain payment terms
2. If credit limit exceed then confirmation should not go to customer
Can you tell me currently how you sending confirmation to customers
If it is through simple mail then go to
IMG >> SD >> Basic functions >> Output control >> Output determination using condition techniques >> maintain out put determination for sales document >> maintain out put determination procedure
Select procedure V10000 >> go to control data
for condition type MAIL maintain requirement 9/11
(If this is not work then create new routine and add your logic that if credit limit exceeds then do not(trigger) send confirmation)
kapil

VA02: Production order/ plan order not processed when credit limit exceeds

Hi,
In VA02, when I try to process a Production order/ plan order from sales document , i get an information message saying that ' Subsequent function not possible due to credit block.' It is going into the incomplete logs. But as per my client's requirement, the order should be processed even if the credit limit exceeds though the message pops up. the message number is V1849. Can you please tell me how to do that?
Regards,
Lohitha

hello.
stop the credit check for particular order type.
VOV8-order typeCheck credit limit--choose option
No credit limit check
A Run simple credit limit check and warning message
B Rund simple redit limit check and error message
C Run simple credit limit check and delivery block
D Credit management: Automatic credit control
for particular item category
choose item category : uncheck credit check active check box
for particular condition
OVA8----assign routine for that..
write coding
let me know anything requires
regards,
Rushikesh

Approval Procedure not triggered when Credit Limit Exceeded

Hi,
I've defined an approval procedure which I would like to launch when a clients Credit Limit has been exceeded. I've checked the required fields on Administration > General Settings > BP tab (credit Limit, Commitment Limit, AR Invoice, Delivery, SO). I've also checked the Activate Approval Procedures on the same tab.
I know the approval procedure has been set up the correct way, since it is launched when I change the Terms to for instance 'Total document'.
There is a system-message when I am creating a Delivery Note for a customer indicating that the credit limit for this customer has been exceeded. But still, the system allows the user to add the document without triggering the approval procedure....
What am I doing wrong?
Btw: The credit limit exceeded is in negative numbers, but I've tried both the condition 'Deviation from Credit Limit greater than 1' and Deviation from Credit Limit Less than 1...

Could you clarify what you mean by "The credit limit exceeded is in negative numbers"
Negative number: the system message I get when I create a delivery note for a customer, exceeding the credit limit is the following:
Customer has exceeded credit limit - 95.479 EUR
Customer has exceeded commitment limit - 95.479 EUR
Continue (Y/N)
Make sure the Credit Limits are set in the BP Master. --> OK, credit limit is set to 100 EUR, Commitment limit to 100 EUR
Also use Great than in Ratio and try to use a small number like 10 in the value --> I am using 1 EUR
Also, check in System Initialization > General Settings..BP Tab Activate approval procedure is checked. --> it is checked.
Using the range option does not solve the problem, in fact even if I use 'Deviation from Credit Limit does not equal 1 EUR' the approval is not triggered. When I use the same Approval template, but I alter the terms to Total document greater than 1 or Discount% greater than 1 the approval is triggered.
Edited by: Rui Pereira on Apr 29, 2009 1:19 PM

Credit Limit Exceeded (F-22 Customer Invoice)

When i try to post a customer invoice in F-22, the system is giving only a warnning message as credit limit exceeded. Cheked OBA5 with Message number and application area F5 139, it is in Error only but still the system is throwing a warring message and posting the document.
OB45 Completed
FD32 Completed
OBA5 Completed
Please suggest how can we make an error instead on warning message...is there any Note.

This relates to SD - Credit Management. Please remember to post at correct forum for prompt answers.
However, in this case please check transaction OVAK. Credit check seems configured with Warning message for the relevant Sales Document Type. Change it to Error message.
Regards
Ajay

How configure the credit limit at sales order level

Hi
how can i configure the credit limit at sales order level..
ex: when i create sales order ... if exceeds the sales order value to credit limit value ...sysyem does not accept to save this sales order ...is it possible...pls help me in this issue
regards
sesidhar

Hiiiii
It is very much possible in SAP
first you have to create credit control area
then assign your company code to your credit control area
then create your customer and assign credit control area in billing tab (for that u have to activate credit control area for your transaction by OB20)
Then go to t-code VOA8
assing credit check to your sales document type
create credit control area automatic with your credit control area.
Regards
Shambhu Sarkar

Credit Limit by Product (Sales Area)

Dear Experts,
I have to maintain credit limit by Product. Thatu2019s why am maintaining credit controls for sales areas. Because every Product has different individual sales area. Please see below detail explanation.
Our credit control area for customer: 1000 (This credit control to maintain credit limit for customer)
We have 3 sales areas i.e:
1200 AB A1 u2013 (for this sales area product is Chemical)
1200 AB A2 - (for this sales area product is Petrol)
1200 AB A3 - (for this sales area product is Diesel)
So like above products client want to maintain credit limit by Product.
Business scenario is customer 90000123 has credit limit 100 MIL USD
This customer has sales with above 3 products. So we want to maintain (divide) 100 Mil USD credit limit by product that is for Chemical credit limit 30 Mil USD and Petrol credit limit 40 Mil USD and Diesel credit limit 30 Mil USD.
So, I want to maintain credit controls by Product so I created credit controls for 3 products i.e
1001 u2013 Cr.contro alre for 1200 AB A1 Sales area
1002 - Cr.contro alre for 1200 AB A2 Sales area
1003 - Cr.contro alre for 1200 AB A3 Sales area
I have assigned above credit control areas to the particular sales area and maintained credit limit for every credit control area as per above with same customer.
Like 1000 u2013CCA for customer 90000123 (Maintained 100 mil USD)
1001 u2013 CCA for 1200 AB A1 Sales area (Maintained 30 Mil USD with above customer)
1002 u2013 CCA for 1200 AB A2 Sales area (Maintained 40 Mil USD with above customer)
1003 - CCA for 1200 AB A2 Sales area (Maintained 40 Mil USD with above customer)
Whenever I create sales order with the above customer for 1200 AB A1 Sales area (Chemical Product) with 5 Mil USD after that the customer credit limit should be 95 Mil USD here the CCA is 1000 and 1001 Credit control area cr. Limit supposed to 25 mil USD) But I couldnu2019t get like this. I am suspecting this scenario is correct or not. If this scenario is correct. Pls suggest me where I did mistake what I have to do. If this scenario is wrong pls suggest me how to maintain credit limit by sales area.
Thanks & Regards,
Vasu

Dear Vasu,
try to Create the SO with Value above 30 ML. If System not block the Order than you have to check the Configuration.
regards
Mukesh

Credit limit exceeded

Dear expert
while creating order error comes credit limit exceeded , evevt sufficiant amount in his account.
pls tell me where i have to check in details the credit limit
Vicky

Vikas,
Receivables = (-)71,435.66
sales value = 57,259.08
credit exposure= (-)14,176.58
whats the new order value? is it (-)450,924.94 ?
plz check in fbl5n for the customer.
you can find whether there are any outstanding bills which might get added to the credit exposure.
Check and revert .
Regards,
hegal

Monthly credit limit exceeded.

I too have similar problem. Monthly credit limit exceeded. I have numerous business calls to make today and for the balance of the month. Unable to buy new credit (using credit card) . I can't find any other way around it (noting that other payment options are not available to me) apart from finding an alternative to SKYPE. SOLUTIONS anyone please

Hello,
Using some else's thread is not only unfair to the thread starter but can lead to confusion and cause difficulty for those who are trying to assist you.
You have a different issue.
ALWAYS start your own thread.
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Credit Limit Exceed

Hi All
I was trying to figure out where the amount by which credit limit exceeded is stored and finally came to the conclusion, I have to do an enhancement to BAdI UKM_R2_ACTIVATE. Accordingly I used T-Code SE18 and created implementation under Classic BAdI and came upto METHOD IF_EX_UKM_R3_ACTIVATE~SET_ACTIVE
ENDMETHOD
screen.
Here I declared Type, Internal Table and Work Area of my Z-Table. No error and it activates. When I try to pass LIKP-VBELN, CREDIT_LIMIT_EXCEEDED, CREDIT_LIMIT_CURRENCY and SAV_KNKK_KLIMK (which are all available in the BAdI and which I confirmed by debugging) gives message field unknown and not specified in tables or defined by data statement.
How to get these variables known to the BAdI implementation and transfer these values to my Z-Table. Is the procedure I am following right?
Please guide.
Thanks and best regards
Subin

Dear Krishnan,
You can find the open deliveries in TCODE VL06,
a delivery remains open unless PGI is done.
And you can fin list of open billing documents in VF05 .
Also + and - concept is like thiis
Whatever is recievable from the customer is + ve
in case open delivery it is -ve because it is not receivable fro the cutomer since you have not delivered the goods.
Hope this will clear your doubt.
Thanks & Regards
Rasik Waghela

I have "un-synched" all music on my iPhone 5s, but there are still some albums that I can't delete. Suggestion?

I have "un-synched" all music on my iPhone 5s, but there are still a few albums that were not deleted. When I check "On This Phone" in iTunes, those albums that remain show in dark print, while those deleted remain a lighter text. I have followed suggestions by others as to how to delete "All" music on the phone, but nothing has worked. Any suggestions? Thanks!

First of all... You don't need a credit card to make an Apple ID.
To buy Paid apps, you can use an iTunes card or an Appstore card.
Also, I'm not sure you can download music you got from email to your music on your phone.
However, I think you can download the music you got from your email on your computer, transfer it to iTunes, and then sync your phone. That should work.
And I don't think you can share files via bluetooth with other phones.

Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do?

Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do to fix this and get rid of the grey songs?

Go back to iTunes, select the Music tab, uncheck the 'sync music; button, then hit apply.

I had deleted some Apps on my iOS Devices (iPad mini and iPhone 5), but they are still in the Cloud. How can I delete them in the Cloud, too ?

Hallo together,
I had deleted some Apps on my iPhone and iPad, but they are still in the Cloud. My First iPhone was a 2, my Second a 4S and now I use a 5. With the 2 I had used a different Apple-ID, but I put some Apps via Backup from one Apple-ID to another. As I get a Message by furtherly Backups, that some Apps are not can be saved because the Apple-ID is no longer on that PC registred, I had deleted this Apps to get they new for the actually Apple-ID. But I'm not shure, when I install them now, that they are working under the correct Apple-ID.
Any Ideas to solve the Probs ?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
You cannot Delete from your Purchase history... But... you can Hide...
iTunes Store > http://support.apple.com/kb/HT4919
Note:
iCloud only Stores a Link to your Apps...

Total Credit Limit exceeded, but orders are still credit approved

Similar Messages

Maybe you are looking for