Total rowsize for table exceeds the maximum number of bytes per row (8060).

I am trying to Creat a UserDefined Field in Marketig document OPOR Table through the script. then the warning "Total rowsize for table exceeds the maximum number of bytes per row (8060). " is occuring ,and transcation rollback. how can i solve the problem.

You have three ways to deal with this:
1) make you user field smaller.
2) check all other UDF in that table, and if you find one that your not using, delte it.
3) Somebody told me that SQL Server 2005 will not have this problem. Maybe you can migrate.
Best regards
Harold Gómez V.

Similar Messages

Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing - (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing - (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

ORA-22290: operation would exceed the maximum number of opened files or LOB

i am getting this error in a procedure.
ORA-22290: operation would exceed the maximum number of opened files or LOBs
22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
// *Cause: The number of open files or LOBs has reached the maximum limit.
// *Action: Close some of the opened files or LOBs and retry the operation.
NAME TYPE VALUE
session_max_open_files integer 10
Procuedure:
CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
P_EVENT_KEY IN VARCHAR2,
X_STATUS_MSG OUT VARCHAR2,
X_STATUS OUT NUMBER
)AS
l_parser dbms_xmlparser.Parser;
domdoc xmldom.DOMDocument;
nodelist XMLDOM.DOMNODELIST;
node XMLDOM.DOMNODE;
n_child XMLDOM.DOMNODE;
elements XMLDOM.DOMELEMENT;
name_node_map XMLDOM.DOMNAMEDNODEMAP;
parent_seg varchar2(4000);
tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
chile_seg VARCHAR2(4000);
p_seg VARCHAR2(4000);
p_seg1 VARCHAR2(4000);
p_seg2 VARCHAR2(30);
p_int_name VARCHAR2(50);
col_value VARCHAR2(100):=NULL;
len1 NUMBER;
cnt NUMBER;
seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_seq_set VARCHAR2(3); --brad coding
parent_id number; ---brad coding
valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
data_status VARCHAR2(10);
v_main_seg VARCHAR2(50);
v_seq_no NUMBER;
V_CLOBLOCATOR CLOB;
V_FILELOCATOR BFILE;
v_amount_to_load NUMBER;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
warning NUMBER;
v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
DIRECTORY_PATH_INVALID EXCEPTION;
PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
NO_PRIVILEGES EXCEPTION;
PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
INVALID_DIRECTORY EXCEPTION;
PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
FILE_NOT_FOUND EXCEPTION;
PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
v_whid poldat_view.wh_id%type;
BEGIN
--NAME : PROC_WMS_XML_READ.PLS
--DESCRIPTION :
-- Procedure PROC_WMS_XML_READ search XML files from remote location.
-- Open,Parse and Read XML files. Store all XML values into tables.
-- Developed by Dharmesh Patidar(jw782)
-- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
-- by Vishwanath Dubey(jl246) on 17-June-2011
-- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
BEGIN
SELECT event_name,file_name,WAREHOUSE_ID
INTO v_event_name, v_file_name,v_whid
FROM usr_oub_file_process_details
WHERE event_id=p_event_key
AND process_flag='U';
EXCEPTION
WHEN NO_DATA_FOUND THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN TOO_MANY_ROWS THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN VALUE_ERROR THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
/*LOGIC TO READ XML FROM REMOTE LOCATION START*/
DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
V_FILELOCATOR ,
V_AMOUNT_TO_LOAD,
DEST_OFFSET,
SRC_OFFSET,
0,
LANG_CONTEXT,
WARNING);
dbms_lob.close(V_FILELOCATOR);
/*LOGIC TO READ XML FROM REMOTE LOCATION END*/
/*Temporary Code to help with debug Clear the table before populating it with new data*/
--delete table BRAD_XML_DEBUG;
cnt:=1;
seg_id_bkp:=0;
data_status:='N';
v_seq_no:=0;
prev_seq_set:='NO';
/*create new parser.*/
l_parser := dbms_xmlparser.newParser;
dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
/*Parse the document and create a new DOM document.*/
domdoc :=dbms_xmlparser.getDocument(l_parser);
/* get all elements in the DOM*/
nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
len1 := XMLDOM.getLength(nodelist);
/* loop through elements of the DOM */
FOR j in 1..len1-1 LOOP --MAIN LOOP START
BEGIN
/*below sql will fetch Node from table to travel xml data*/
BEGIN
SELECT int_name,tag_name
INTO p_int_name, p_seg1
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND seq_no =cnt;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN OTHERS THEN
NULL;
END;
IF cnt=1 THEN
v_main_seg:=p_seg1;
END IF;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN no_data_found THEN
null;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*LOGICS TO READ XML START*/
node:=XMLDOM.item(nodelist, j);
elements:=XMLDOM.makeElement(node);
parent_seg:=(xmldom.getTagName(elements));
tag_name_bkp:=(xmldom.getTagName(elements));
name_node_map:=xmldom.getAttributes(node);
n_child:=xmldom.getFirstChild(node);
col_value:=xmldom.getNodeValue(n_child);
/*get the sequence number from the interface hierarchy table */
SELECT count(1)
INTO valid_seg
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
if valid_seg>0 then
begin
SELECT seq_no
INTO sequence_bkp
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
seg_id_bkp:=seg_id_bkp+1;
p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
end;
end if;
if prev_seq_set = 'NO' then
begin
prev_sequence := sequence_bkp;
prev_seq_set := 'YES';
end;
end if;
if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
begin
select max(seg_id)
into parent_id
from usr_wms_global_xml_det
where seg_sequence = sequence_bkp-1;
prev_sequence := sequence_bkp;
end;
end if;
if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
parent_id := seg_id_bkp-1;
prev_sequence := sequence_bkp;
end if;
/*end getting the hierarchy table sequence */
/*LOGICS TO READ XML END */
IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
if parent_seg=v_main_seg then
v_seq_no:=v_seq_no+1;
end if;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END ;
p_seg:=parent_seg;
p_seg2:=P_SEG1;
cnt:=cnt+1;
ELSE
chile_seg:=parent_seg;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
END IF;
END LOOP; --MAIN LOOP END
dbms_xmldom.freeDocument(DOMDoc);
x_status:=0;
EXCEPTION
WHEN DIRECTORY_PATH_INVALID THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN FILE_NOT_FOUND THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN NO_PRIVILEGES THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(DOMDoc);
RETURN;
END PROC_WMS_XML_READ;
Edited by: user13427480 on Feb 8, 2013 7:08 PM

when you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Can't setup iCloud V 4. I get error: You have exceeded the maximum number of 25000 allowed events and tasks. I get this error no matter what choice I select to setup.

Is your I tunes ID an @me.com ID? If not, i cloud ONLY works with an @me.com ID. You will have two ID's. One for I cloud, one for I tunes

Stream analytics - Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5

Hi,
I have configure stream analytics to read messages from eventhub and I am getting this error message:Correlation ID:
e185534f-9e82-4efc-8050-5294796fb275
Error:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5 TrackingId:4569eca8-cb70-4c50-96cd-5868bfbc3e37_B45,TimeStamp:1/7/2015 11:40:37 PM TrackingId:f408292e-0dab-40cc-8ae9-2730313c3241_B45, Reference:8fca3c6a-b0d1-41cf-a835-f7c74a2ea8c3,
Timestamp:1/7/2015 11:40:37 PM
Message:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5
Message Time:
2015-01-07 23:40:38Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.naveenevents_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Receive Events
Microsoft.Resources/ResourceUri:
/subscriptions/f122f431-ddc7-4e21-ae3a-f6a9e1273bcb/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/Naveenstreamanalytics
Type:
EventHubInputAdapterEventHubFailure
Any help on the same is appreciated.
Thanks
Naveen

Hi Naveen,
Thanks for reporting this issue. We are taking a look at this issue.
Questions:
Do you have multiple readers reading from this EventHub, or have you setup multiple Stream Analystics jobs reading from this event hub. You are hitting a limitation of how many readers are allowed per EH consumer group.
What is the serialization format of your input (JSON/CSV)? Could you please verify the serialization format setup in the streaming job and if it matches your data?
Thanks
Zafar Abbas

The maximum number of connections per source ('20') for this connector has been reached by this source IP address

Receive connector 'Connector Name' rejected an incoming connection from IP address "IP of our load balancer". The maximum number of connections per source ('20') for this connector has been reached by this source IP address.
I understand that I can up the limit - however, I'm wondering if there is a way to up the limit for ONE specific IP (our load balancer)
TAG

It does not look like you can up the limit for a specific IP but you might be able to create a separate receive connector for that IP address (and then change the limit).
That is just a thought. Others may have more input on why you may or may not want to do that in practice.
What SMTP traffic would not be coming from the load balancer?
Is the objective to *not* allow some other (possibly malicious) source from creating excessive connections to the server?
Otherwise, this is a good discussion about the different parameters that must be considered if you do decide to adjust the values (changing one may not suffice):
http://letsexchange.blogspot.com/2012/04/receive-connector-rejected-incoming.html
Nuno Mota's blog (MVP)
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Why i'm getting a warning 1021 even after changing The maximum number of connections per source (Unlimited) ?

The maximum number of connections per source (Unlimited) for this connector has been reached by this source IP address.

Hi Arun,
In order to figure out the source of the problematic IP, we need to collect the following logs:
Detail messages of the Error 1021 including the blocked IP address.
Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
Using the EAC to configure protocol logging.
Besides, use the command below to verify if they are set as expected:
Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
Regards,
Rebecca

How to change the maximum number of process per user in BW ?

Hi,
Do you know how to change the maximum number of process allowed per user ?
With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
In fact, my production environment reach always the max number of process available in SM50...
Thanks a lot

Hi,
A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from a list of N worl proceesor which has been taken the work.
Correct if I am wrong.
Regards
Syed.

Why do I keep getting the message "Unable to connect to Imap server you may have exceeded the maximum number of connections to this server.

I already tried reducing the maximum number of connections to 1, but I'm still receiving the message. Is there anything else I can do?
My computer is a Mac mini running OSX 10.9.5. Firefox is version 34.0.5.

Ok, IMAP server almost universally allow multiple connections. Thunderbird as you would have observed uses 5 if they are available. As Airmail suggested, iphones just use more and more until they exhaust the available connections. There is no set maximum option.
However there are other things that can consume connections and some may surprise you.
Anti spam tools such as mail washer
Anti virus programs in their anti spam or anti phishing roles
Web mail.
The wife sharing the same account on her laptop.
That is from the top of my head. So could any of those apply.

I am getting an error message for a GMail account that I may have exceeded the maximum number of connections but........

I changed the max. # of server connections to cache to one as recommended and am still unable to use this account. I also tried to flush my DNS cache but for some reason this also is not functioning. I am using a Macbook Pro. My Zoho account is still functioning normally with T'Bird so it makes me suspect it is a problem with Gmail and perhaps not T'Bird. Thoughts? Thank you.

using other iProduct which to not limit their connections to receive mail, like iPhones and iPads? Turn them off and all will be well.
Tools menu > account settings > server settings >advanced and you can edit the maximum connections Thunderbird will establish with an IMAP server.
Unfortunately the afore mentioned Apple products have no such setting, or at least my last foray into the apple support forums left me believing so. It makes their mail functions fast, but makes playing in the same sand pit as others much more difficult.
Gmail currently has a limit of 15 simultaneous IMAP connections per account. see https://support.google.com/mail/answer/97150?hl=en

What is the maximum number of recipients per group text message

I was just wondering if there was a limit on the number of people who are allowed in a group message? My phone will only let me have 10 people, but my friends phones let them have as many as they want?

As you appear to have discovered, the maximum is 10.

How much is the maximum number of byte that a string control can hold?

And also if the the number of byte sent to a string control is beyond that limit, will the string control discard that data?

From App Note 154:
"LabVIEW stores strings as a pointer to a structure containing a 4-byte length value followed by a 1D arrays of byte integers (8-bit characters)."
The 4-byte value is the same size as a U32, which has a range of 0 to 4,294,967,295. So, your string can have up to 4,294,967,295 characters. If you have the memory
What does a control do if you exceed that? I don't know. I don't have enough RAM to try it and see.

What is the maximum number of lines per PO?

Are their line limitations per PO? I'm trying to find out if there is a max number of lines you can have on a given PO.
I assume performance starts to get effected at some point, but at what point might that be? 100 lines, 1000, 5000? We are looking at creating some standard PO's with 500+ lines on them, so we can create ASN against them via iSupplier.
If you know or have any experience dealing with large PO's please fill me in.
Thanks,
Jeremy

Hello,
We used to have an interface who imported standard PO, with a contract number as PO number, then the number of lines was increasing. We had a first problem from 200 lines, we had to apply a patch, then the limit was about 900 lines. I made a few searches but this occurs 2 years ago and I'm not even able to find the SR or a patch number ...
But from a business point of view, it's obviously a bad idea to always have the same PO with a high number of lines (hard to match invoices, PO is never closed, etc.) , from this problem we choose to import PO with PO number generated from the BL number + an suffix (to avoid duplicates PO numbers)
Hope it helps a little,
Kind regards,
Xavier

SPD 2013 WF Error: Maximum number of arguments per activity (50).

Hi,
We have hit a limit with using variables in SPD Designer workflow in SP2013. The following is the error message that we receive:
"Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors: Activity 'DynamicActivity' has 52 arguments, which exceeds the maximum number of arguments per activity (50)."
The following thread >>here
did provide a solution but we need a solution that's based on Powershell or Server Object Model. Is there an approach for changing the variable limit for workflows with Server Object Model/Powershell?
Blog: http://dotnetupdate.blogspot.com |

Hi Vikram,
as i know if you want to change this, there is no other way then to update the database directly, that we strongly not recommend this to be done.
they may not have any powershell or server object modal command to update the database value directly, instead you need to try on your environment, here is the example to access sql from powershell:
http://technet.microsoft.com/en-us/magazine/hh289310.aspx
to check the database, you can use the database explorer to develop the code:
http://moresharepoints.blogspot.in/2014/01/sharepoint-designer-2013-workflow-error.html
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Attempt to start procersses will exceed the maximum allowed number[1] of started applications for account

i have met a problem, when i want to start the cloud server, it has this problem tips.
but i have not start another start the processess in this account. how can i do ?

when you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417

Total rowsize for table exceeds the maximum number of bytes per row (8060).

Similar Messages

Maybe you are looking for