Touchpad Speed and Finder problem

Alright, I'm using a Penyrn baseline Macbook Pro that I picked up when it first came out. I'm loving it. It's great. So far, I've had a few big problems with it though.
1) When I've been playing some graphic intensive games, like World of Warcraft, my Finder and dockbar freezes. Like, nothing would work, I couldn't alt-tab and while my game would work, I'd have to reset the entire computer.
2) Again, while playing World of Warcraft, sometimes my Touchpad speed would get reset down to a slower setting. When I try and change it, it won't stay and often whenever I alt-tab between programs, it'll go back to the slower setting.
3) Is there any place, Apple Store and what not that I could get it in for a check up? There's a few smaller things I feel IN the keyboard that's a bit defective and pixel problems.
thanks!

This will need more testing, which is outside of the scope of this forum. Its the upload speed which seems to be the issue, so there may be some faulty equipment.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they cannot deal with service issues that way.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail, when its your turn in the queue.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • MSI NX7600GT-T2D256EZ speed and temp problems?

    Hi, I'd like to buy a MSI NX7600GT-T2D256EZ but after reading this comparison in Madshrimps i'm confused:
    http://www.madshrimps.be/?action=getarticle&number=12&artpage=1958&articID=460
    At the time of this comparison, there was a problem with speed and temperature as you can read in the article. I'd like to know if this problem has been already solved, because i didn't found any new info following this article.
    Could someone help me? I really like this card since there is no fan, but wouldn't like to find problems.
    Thanks a lot.

    Well the Link works but the described issue would only happen if gpu is overheating (as Aaron said). This is automatic core slow down and happens with any GeForce FX/6/7/8 vga when reaching the critical temp. Of course a passive cooled vga reaches higher temps than a vga of the same kind with active cooling. So good airflow inside the case is crucial to keep the temps down. With just an ordinary airflow (two casefans) the 7600GT-EZ never reaches critical temp.
    The article you linked to also describes that the NX7600GT-T2D256EZ wrongly reports too high temps. This issue is unknown, I build a system with this vga sometime ago and it never reported wrong temps.

  • Broadband Speed and Connection Problem

    Since the 03/03/11 I have has problems with the speed and stability of my broadband connection.
    The IP profile of my connection has now become significantly smaller than my downstream, suggesting that my line had become unstable.
    I have checked the internal wiring, the micro-filters and the router, and changing any combination of these does not re-stabilise the line nor offers any speed improvements.
    The downstream listed below has gone down over the last couple of days, once again suggesting a line fault somewhere.
    I have contacted BT support about this issue via email.
    If anyone else has any ideas of what I could try to help sort this out, I would be very thankful
    Hopefully I have provided enough information below to allow any sort of diagnosis to be made, but I'm placing my bets on a line fault caused by the bad weather lately.
    Speed test (via speedtest.net) gives the following values: (Download: 14.2 kB/s) (Upload: 35.8 kB/s) (Ping: 492ms)
    Problem persists on WiFi and ethernet.
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 02:44:00 (**due to dropping the connection)
    Downstream
    1,024 Kbps
    Upstream
    352 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.1 Annex A
    Latency type
    Interleaved
    Noise margin (Down/Up)
    12.2 dB / 8.0 dB
    Line attenuation (Down/Up)
    53.0 dB / 29.0 dB
    Output power (Down/Up)
    1.8 dBm / 0.7 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    7863 / 929
    CRC Errors (Down/Up)
    27806 / 1001
    HEC Errors (Down/Up)
    120687 / 1324 (**extremely high)
    Error Seconds (Local/Remote)
    4628 / 1088

    Hi
    results from the BTlineTest
     Download speedachieved during the test was - 109 Kbps
     For your connection, the acceptable range of speeds is 50-250 Kbps.
     Additional Information:
     Your DSL Connection Rate :3584 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 135 Kbps
    No idea why it says "135 kbps" as im obviously getting nothing near that.
    One example is "counter-strike" online multiplayer game, when i load it, my Latency is at a normal 40-50.. then it shoots up to 5-600, making it unplayable.
    Maybe its the exchange i dunno, might just sort it-self out in the next couple days, but its been 3 days now so im a bit concerned.

  • Cisco 837 speed and duplex problem

    I have one Cisco 837 connected to Cisco 1900 and Cisco 2924XL. When i set the speed and duplex to 10 full duplex or 100 full duplex i 837 the fastethernet interface is going down. Its working if i set speed and duplex to auto i 837 router. I have 12.4(4)T release on my Cisco 837.

    Hi
    AFAIK 1900 doesnt support auto negotiation so better manually hardcode the speed and duplex to 10/half or 10/full on the port which is connecting to 1900 and
    100/full to the port which is connecting to 2924 coz it does support 100/full.
    regds

  • Airport Security, Speed and WDS Problems

    I've been reading the posts here about the new AirPort "n". I also posted my own thread about the curious speed issues I've observed. BTW, my computers are all "" capable. An off-the-cuff summary (please correct me if I'm wrong):
    1. WDS in any practical form is hit or miss. Creating extended networks appears to be a basic non-starter, though AirTunes seems to work in many cases. Manual vs Assistant setup sometimes helps, but as an experienced user, I find this all a bit vexing.
    2. Enabling any kind of security has a predictable and detrimental impact on speed. Personally, I've seen WEP security grind formerly 5.7MB download speeds to less than 500, WPA routinely takes 5.5MB to less than 2MB, and turning off security but implementing Timed Access slows my network to less than 80kb download speed.
    3. Turning off security entirely seems in my case to allow the AirPort to function more or less properly. Of course, no security is unacceptable.
    4. There is a resignation to the idea that a future firmware update will fix what are fundamental problems with a perhaps too-early-released product.
    I've been pretty methodical about my observations and tweaks -- resetting the unit to factory, sing the interface setup automation as needed, re-powering between changes. I've read about others ganging multiple AirPorts with success. While the new AirPort is not quite a doorstop, it appears to be not-ready-for-prime-time. Or maybe mine is just a lemon.
    In my case, I've rectivated my previous-generation Extreme complete with security, AirTunes, network extension, etc (even used the new Utility to do all the setup). My speeds are happily back at 5.7MB down.
    Thoughts?

    I appreciate the response. I'd usually agree that "operator error" is at the root. After over 20 years of using Apple products, this is the first that has me scratching my head. But I'm not new to this -- I built one of the first and largest Xsan installs in the U.S. I'm an early adopter, and most always an early success story.
    As I said earlier, I've worked the scenarios very methodically. It could very well be that this is a hardware issue with this particular unit, or a higher percentage of units is failing than the norm. That would not be new - early new hardware in some Apple product line have experienced teething problems. Not a long term worry, though.
    My next step is replacing the hardware, carefully observing serial numbers, etc.
    The question, btw, is implicit -- is there something altogether simple that escapes me and a number of reasonable users that is causing a problem?

  • Speed and printing problems with Tiger

    Perhaps it is the number of photos i have stored in Iphoto (4000)? but my computer has become very very slow, especially when iphoto is open. Also, Internet explorer is unresponsive, and i find myself often having to use force quit. Are these problems unique to tiger or are they because i have so much saved on my hard drive?

    Jeffrey,
    It appears that you may have several issues occuring and it would help if you included as much info about your Mac as possible, i.e., which iMac, ram, hard drive capacity, amount used, processor speed, etc....

  • VIA KM4M-V motherboard CPU speed and AGP problem

    Hello. Please be patient I am not technical I would say I'm intermediate, so please if anyone is kind enough to help, please don't blind me with jargon! I have 2 problems I believe are motherboard related, I shall go thru them both. Any solutions/suggestions will be very gratefully received! Operating system is Win XP Pro SP 2 running 512 MB RAM (64 used at moment for onboard graphics)
    I purchased this mother board: VIA KM4M-V. I also purchased an AMD Sempron PR2600+ which should be showing a speed of 1833 Mhz, but is coming up as 1466 MHz. Does anybody have any info please? I have downloaded and installed all the latest deivers and BIOS for the motherboard, and the MSI live monitor says there are no new updates now. Is there something in BIOS I need to change? Or is this a mistake on the manufactuers part? If so, which one? LOL
    2nd problem: The onboards graphics weren't good enough for some games I had - it required an AGP card. So I have purchased an ATI Radeon 9550 256 MB AGP card. OK I installed this card. All OK starting up. installed drivers, restarted computer. Was OK then changed to 32 bit colour and change the resolution of screen. When I clicked apply went into energy saving mode. Rebooted. As soon as it went to boot into windows, the monitor went into energy saving mode. Once it didn't straight away and windows started then the screen went distorted then it went into energy saving mode. I went into safe mode uninstalled the graphics hardware booted into windows again and reinstalled looked OK then I rebooted and it did it again grrrrrrrrr I went and disabled onboard graphics (ATI said might be issue on their site) still won't boot. Something I am doing wrong? Is it the motherboard?
    I'm thinking that it is both botherboard ::koff:: I mean motherboard It's OK I mean it's better than what I had, but I know it's not what it should be! I am grateful to you guys for your help. Thanks very much
    Rachie

    Quote from: psywhizz on 16-February-05, 10:01:00
    More on this! I am running win xp pro sp 2 BTW. I have been swapping between the onboard graphics and the ATI radeon 9550 AGP card I just got. I have been disabling onboard graphics, then installing from scratch (all virus and programs off). As to power supply/amperes? I have no idea all I know is it's a 450 watt rating and has ummmm 230 on back (volts?) it's pretty new I got it like 5 months ago
    OK I can get it sort of working when I go into the BIOS and set it from 8x to 4x. The graphics advanced setting was showing 4x. The motherboard is SUPPOSED to support 8x but it just won't work at all in that mode. It works for awhile in 4x mode. No specific amount of time I have current drivers on everything! Then the same old thing happens! Monitor goes to energy saving mode or computer restarts. On restart can use it again for a limited time again, and then the mouse pointer kinda goes funny and it freezes. It goes pixalated and if I move it this 'block' goes up and down in a line only. Most of the time has been trying to start AOL (my ISP)  it goes off then. Have tried different rates (went down to 16 bit) and desktop sizes (went down to the one above 800x600) no go. I took the refresh rates to 60, tried everything. I have taken it out again.
    I don't know if it a motherboard problem, the graphics card or a combo! I just paid £54.99 for the graphics card, and don't want to waste it! What should I do. It's really frustrating!
    Rachie

  • Mouse and Finder problems with Snow Leopard

    Since upgrading to Snow Leopard I have a weird problem, after a time the mouse will start skipping and the finder becomes very slow to respond, whether it a program is calling up a dialog box, or I go to the apple menu to select "system preferences" or I double click on a HD, it is slooooooow.
    Funny thing is that after a reboot, all is well until it isn't, and it progresses, the mouse will skip a bit then more then the finder gets slow and then slower etc... there is no consistency to the duration of onset of problems, and it doesn't matter if I open no programs or 6.
    Also, I have removed all preference panes that aren't Apple's and rebuilt the permissions and did a couple of FSCKs (disk appeared to be fine in all cases) I have over 40% free on my start up drive and as you can see below I have 10gigs of ram.
    any help would be greatly appreciated.

    looking at the system.log in the profiler now, there is a problem, a version of snapz pro and eyeTV (the latter I had sussed out from the console application, odd that the system.log in the profiler didn't mention eyeconnect and the console didn't mention snapz)... I just upgraded both to the latest versions that are supposed to be snow compliant, but only time will tell if this fixed the problem.
    thanks

  • Slow data speeds and AirTunes problems???

    This is a bit weird.
    Lately I've noticed that my wi-fi speeds feel very slow. Downloading files, software updates, etc., are very slow. When I plug in via an ethernet cable, everything is nice and fast.
    But here is what is also happening - I have numerous Airport Expresses around my house that are only used for music (some have wireless turned off and are connected via a cable and some have wifi turned on, but only for receiving music - none act as a wifi access point). I only have one wifi access point, and that is my Airport Extreme. All of a sudden, I can't stream music, via iTunes, from a computer connected via wifi to a computer on the wired network. But, if the computer is on wifi and the Airport Express is also on wifi, streaming works fine. Vice-versa also doesn't work (i.e. if the computer is on the wired network it cannot stream iTunes to a wifi Airport Express but it can stream to wired Expresses).
    Something is very weird, and I think it has to do with the Airport Express not functioning properly. But, I have all the latest firmware updates on it and I'm getting a green light in the utility.
    Weird - I know.
    Any ideas???
    David
    Message was edited by: dschamis

    It is very possible that you may have some form of Wi-Fi interference that has been introduced recently in the immediate area that is preventing your AirPorts from providing a good clean signal.
    I suggest you perform a simple site survey, using utilities like MacStumbler or iStumbler to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

  • Speed and burn problems

    I've been experiencing difficulties burning a dvd project today in iDVD4.
    The project is about 110 mins. I have never burned over 90 minutes before. All video files are on external drives, as with all DVD projects I have successfully burned over the years.
    I usually set up the DVD on another machine on iDVD3, then import and update to the machine with iDVD4. Again this is a tried and tested route. I do this because I like the fact that iDVD3 will encode before you click burn so you can generally burn more successfully more quickly. I then use the easter egg to burn a disk image and burn my disks via disk utility.
    This time however iDVD seems to have slowed down massively on my second machine. It takes minutes to shuttle between scene selection screens [these are chapters made in and imported from FCP 4.5]. Again never had this problem in the past.
    I repaired disk permissions, made no difference. Tried to burn disk image, computer froze at a different point every time. Is going over 90 minutes a real no-no?

    Is going over 90 minutes a real no-no?
    It is feasible with best quality but there is a degradation of quality over 70 minutes or so and will undoubtedly take longer and require more free disc space.

  • Anyone having speed and bootup problems with their iq506 touchsmart?

    After buying and loading recovery disks, I am still experiencing slow, slower than normal, response times from my hp touchsmart iq506 pc. It has always been somewhat slow and there are always too many programs running. Even after disabling many programs the iq506 is still slow. I am running vista and wonder would I get better performance with windows7. If someone has figured this out, PLEASE let me know.

    I know you said you had tried changing channels but try downloading inssider2 and then run it. This will show the broadcasting networks round about you and their channels including your own. Then enter your router and change your wireless channel to a free or less congested channel.
    it may help or at least confirm the strength of your wifi signal
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • T60 Touchpad Replaced and not Working

    I recently replaced my touchpad (palmrest) and plugged it in. I actually have to disable it in bios in order to use my trackpoint. I have the most recent drivers and utility for Ultra Nav.
    When I select to activate my touchpad in the bios settings, I then get a warning triangle, and my trackpoint becomes "hidden" in the device manager and inoperable, I can't use it.
    Any ideas on how to ge both working? I feel I am close!!
    J

    MollyMoo wrote:
    Thanks for the reply,
    The touchpad does show up in the bios, so I think the system board is whole, but who knows. I just tried to boot up with the trackpoint disabled and the touchpad automatic, and the problem I explained before where the device manager shows the ultranav pointing device with a warnign triangle and hidden. I think the synaptics driver files for the trackpoint are the same for the touchpad.
    Is there way to test or check the system board?
    Most diagnostic tests will be inconclusive. There are specific ways to test the system board, but it's not something you'd want to do, it would be far less work and cheaper to simply replace it then diagnose it, but getting back to your problem...   you didn't answer my question, so lets start from the beginning....
    You replaced the palmrest/touchpad assembly...    Why?
    Does the replacement have the same problem as the original?
    If I wanted to dianose the problem I'd do it the fastest and cheapest way possible, by pluggin in a known good part and seeing if it works. That sure beats tracing and testing microscopic circuits for hours, something that lenovo repair centers don't even do, they simply replace parts. Used T60 parts are cheap, so whatever you may need shouldn't be a problem to get. 
    Regarding your drivers...   windows generic drivers will work, and I've never seen the problems you describe, but if you've installed improper drivers, it could have caused such a problem, but again, I really don't know what you did, or even what started all this and what problem you were trying to fix, but if you want to see if this problem is hardware or software, you can try booting from a Linux LiveCD, boot up with option to make no changes to your system and see if both trackpoint and touchpad work using Linux, if they do, then you have a driver problem, in which case I'd uninstall all mouse devices and reboot. Windows "should" enable generic mouse driver so you can use the system, then it would only be a matter of installing the proper drivers, , but do this AFTER you've determined it's software, not as a test, or you'd be likely to just complicate things even more.
    You can get a Linux LiveCD at Ubuntu.com.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • I just bought an Ipad and find that it is not compatible with Adobe flash player which I need to play Bridge on line on BBO.  Is there a solution for this problem?

    I just bought an I pad abd find that it is compatible with Adobe Flash Player which I need to play bridge on BBO.  Is there a solution to this problem?

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    Apps that can display some Flash from the Web:
    Puffin
    SkyFire
    Photon Flash
    Browse2Go
    iSwifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

  • I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud.  I have iphoto '08,version 7.1.5.  Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that.  suggestions? thanks!

    I upgraded to Mountain from Snow and find that there is now a problem adding iphoto to the cloud.  I have iphoto '08,version 7.1.5.  Tried to follow one poster's advice and upgrade to 9.1 but I need 9.0 first and I can't find that.  suggestions? thanks!

    You have to buy iPhoto from the Mac App Store.

  • HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

    hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Maybe you are looking for