Trace and error file at the same time ?

hello,
i start my reports through java-runtime.
i want to produce TraceFile and ErrFile at the
same time. But whenever i start the Trace i don't seem
to get an error file ?
is this a choice between ErrFile OR TraceFile or
is there any trick i didn't figure out ?
Greetings
Thorsten Lorenz

Get with your developer and see what the code is really doing as well as how it is being used. All of the deadlocks I have encountered to date had their root cause in the application code. Spending some time with the developers to see what they are doing and more importantly why, will lead you to finding a solution to your deadlock problem.

Similar Messages

Save as PDF and AI file at the same time?

Hey everyone,
I was wondering if it's possible to save an AI file as both an AI file & PDF file at the same time??
Where i work, we always need to save an AI file and a PDF file. So is there a way I can set up my Illustrator so everytime i save something, it'll save the AI file and automatically create the PDF too? ..
Or is there no way around .... Save as: Illustrator file. / Save as: PDF file in two separate actions?...
Any help would be greatly appreciated.
Thanks!
Jay

I was wondering if it's possible to save an AI file as both an AI file & PDF file at the same time??
Where i work, we always need to save an AI file and a PDF file. So is there a way I can set up my Illustrator so everytime i save something, it'll save the AI file and automatically create the PDF too? .
No, it is not possible in the base product.
(I guess it is probably doable with scripting, I'll defer to others on that.)
But can you stop and tell us why you want to do this?
AI files with "Preserve PDF Compatibility" and PDF files with "Preserve Illustrator Editing Capabilities" are functionally equivalent. Both of which are the default. In both cases, the file contains a PDF portion that is visible to PDF viewers, and an Illustrator private data section that is used by Illustrator. Two entirely complete versions of the information that can stand on their own appear in both file types.
While I realize the requirement may be beyond your control, it would still be good to understand it's origin.

How do I play a video and audio file at the same time on Apple Tv?

I need to play a video loop (with no audio) on my apple tv and also play some music in the background. Its a video loop with no audio and then I need music to play in the background. The loop needs to repeat all day because its only 5 min long and the audio is an entire play list that's several hours. This is for a lobby flat screen setup.

QuickTimeKirk wrote:
Very difficult request because the Apple TV can only play one file at a time. It doesn't have a "loop" feature.
You could use QuickTime Player Pro to "join" the audio files into one file. The hard part would be adding the five minute video chunks via copy/paste as each would be added as a new "video" track. QuickTime .mov files can have up to 99 "tracks" and the .mov container is supported by Apple TV.
So this new file would have a new video track (actually just a copy of the original) that played up to 98 times. A five minute source video would end up being a bit over 8 hours in duration.
The 98 track video could be "flattened" into one video track via export. The same for the audio track movie.
Other options:
Set the Quicktime Loop flag in the movie inspector properties.
Make a video playlist, adding the file to the playlist lots of times - make sure playlists are enabled in Settings for video not just music.

Can Flash play multiple audio and video files at the same time?

Hello,
I would like to create a web-based client/application that
can play multiple a/v files or stream multiple a/v files at same
time. Is this possible with Flash, without the use of RTMP? If yes,
can you please provide an example. Thanks in advance.
Regards,
Nilang

You never edit within a clip. The purpose of opening a clip is to make sync adjustments, audio equalization, color correction, stabilization, things that you might want do overall to the master clip before you edit it. You edit the portion of the clip you want from the browser into a project. There is really very seldom any need to open a clip into the timeline.

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

HT1550 I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

I'm having trouble with importing them into iTunes and converting them at the same time. when i hold down option over the files i can't find where its supposed to say create new version. is this if you're in iTunes?

You can't do it in one step. Add to iTunes first, Once the tracks are in iTunes you may convert to a different format.
tt2

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

How to upload multiple .CSV files in the same time.

Hi Legends,
Can anyone please help me to resolve my issue?
This is very urgent and critical.
Description:
We have two users.1)edw_user_dump
2)prd_udm.
We need to upload the xx.csv file at the same time for these two users in oracle forms.
we have differentiated .csv file name based on the user names.
the main problem is in the sql loader command the xx.csv file name is created but the data is not captured in the server (kentucky) .
Below is my code for the upload.
-- To delete the Part_Mast.log file from the client
DECLARE
pid WEBUTIL_HOST.PROCESS_ID;
v_result PLS_INTEGER;
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
BEGIN
v_result := WEBUTIL_HOST.Get_return_Code(pid ) ;
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
END;
DECLARE
l_success boolean:=FALSE;
l_bare_filename varchar2(100):=NULL;
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
BEGIN
-- Delete the content of the log and bad file
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
--host('cat /dev/null > /tmp/Part_Mast.bad');
-- Upload the data file to Application Server
l_bare_filename := v_username||'_'||substr(:FIC_SOURCE,instr(:FIC_SOURCE,'\',-1)+1);
l_success := webutil_file_transfer.Client_To_AS_with_progress
(clientFile => :FIC_SOURCE
,serverFile => '/tmp/'||l_bare_filename
,progressTitle => 'Upload to Application Server in progress'
,progressSubTitle => 'Please wait'
,asynchronous => false
,callbackTrigger => null
IF l_success THEN
NULL;
ELSE
null;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log');
host('cat /dev/null > /tmp/EDW_CF_IO_UPLOAD.bad');
end;
BEGIN
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
v_password varchar2(30) := GET_APPLICATION_PROPERTY(PASSWORD);
v_connect_string varchar2(30) := GET_APPLICATION_PROPERTY(CONNECT_STRING);
a_host varchar2(500);
BEGIN
a_host :='/tmp/'||v_username||'_'||'"CF615 IO Upload.csv"';
host('sqlldr '||v_username||'/'||v_password||'@'||v_connect_string||' '|| 'control=/home/edw_bis/ctl/GLB_CF_IO_UPLOAD.CTL'||' '|| 'DATA=a_host'||' '|| 'LOG=/tmp/'||v_username||'_'||'EDW_CF_IO_UPLOAD.log SKIP=1 errors=200000 DIRECT=FALSE');
dbms_output.put_line(a_host);
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
EXCEPTION
WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
end;
DECLARE
al_id3 ALERT;
al_button Number;
BEGIN
edw_user_dump.SANM_PRC_MERGE_CF_IO_UPLOAD(:global.v_plsql_res,:global.v_ins_rec,:global.v_upd_rec);
IF NVL(:global.v_plsql_res,0) = 0 and (:global.v_ins_rec !=0 OR :global.v_upd_rec != 0 ) then
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,' Process Completed Successfully!'||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec);
al_button := SHOW_ALERT( al_id3 );
ELSIF (:global.v_plsql_res IN(-1,0) or :global.v_plsql_res > 0) and (:global.v_ins_rec =0 and :global.v_upd_rec = 0 and :global.v_del_rec =0 ) then
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,' Process Failed. Please Download the Log File '||CHR(10)||' Rows Failed : '||:global.v_plsql_res||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec);
al_button := SHOW_ALERT( al_id3 );
ELSE
al_id3 :=FIND_ALERT('ROWINS');
SET_ALERT_PROPERTY(al_id3,alert_message_text,'Please Download the Log File '||CHR(10)||' Rows Failed : '||:global.v_plsql_res||CHR(10)||' Rows Inserted : '||:global.v_ins_rec ||CHR(10)||' Rows Updated : '||:global.v_upd_rec );
al_button := SHOW_ALERT( al_id3 );
END IF;
EXCEPTION WHEN OTHERS THEN
RAISE Form_Trigger_Failure;
END;
DECLARE
v_username varchar2(30) := GET_APPLICATION_PROPERTY(USERNAME);
begin
host('cat /dev/null > /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
host('rm -rf /tmp/'||v_username||'_'||'"CF615 IO Upload.csv"');
end;
Thanks in advance!
Thanks,
Madhusudhanan

Madhusudhanan,
A couple of observations. First; always list your exact Forms version (eg; 10.1.2.0.2 not 10g R2). In most cases, the solution is different depending on the Forms version. Second; why must you use Forms to kick off a SQL Loader process? This is a server-side process and should be initiated by a server side process. If you absolutely must use Forms to kick off the process, again we need your Forms version in order to offer any solutions. Based on your code sample, I can asusme you are at least using Forms 9i becuase you are using WebUtil.
Is your Database and Application Server the same physical computer? If they are not, this would explain why your HOST command isn't working because HOST runs against the Application Server not the Database server.
Third; have you considered using and External Table (if your RDBMS version supports them) for each of the files you are attempting to upload? In this instance, it would be helpful to know your RDBMS version as well. External Tables can be a little frustrating to set up the first time, but as with any new construct you use - it gets easier the more you use it.
Fourth; are you getting any errors in your log file(s)? If so, what are the errors? Please list the full error message if you have one.
Finally, with respects to your statement:
Posted: Mar 18, 2011 2:30 PM - Madhu This is very urgent and critical.>
You have to understand that forum contributers are all volunteers - this is not our full-time job. If your issue is truely urgent I suggest you open a Service Request (SR) with Oracle Support! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

10.3 and 8.1 at the same time

I'm trying to run 10.3 and 8.1 at the same time and have had no luck so far.
I have:
installed 10.3 in a new directory, C:\bea103
I'm running 8.1 in the default C:\bea
changed the point base ports in 8.1
changed the http/https ports in 8.1 to 8001/8002
any ideas on what else I should do?
I can start on or the other. When 10.3 is running 8.1 outputs the following to the console (Class paths have been chopped for length and the start command edited for legibility):
JAVA Memory arguments: -Xms96m -Xmx256m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Starting WLS with line:
C:\bea\JROCKI~1\bin\java
     -jrockit
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms96m
     -Xmx256m
     -Xverify:none
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -Dplatform.home=C:\bea\WEBLOG~1
     -Dwls.home=C:\bea\WEBLOG~1\server
     -Dwli.home=C:\bea\WEBLOG~1\integration
     -Dlog4j.configuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml
     -Dweblogic.management.discover=true
     -Dweblogic.ProductionModeEnabled=
     -Dejbruntime.database=pointbase44
     -Dweblogic.security.SSL.ignoreHostnameVerify=false
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.Name=portalServer
     -Djava.security.policy=C:\bea\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
ERROR: No transports initialized
Stopping the Weblogic Workshop debugger...
=== Debugging ===
This window is necessary for debugging code using WebLogic Workshop
Debugger Stopped.
Stopping Pointbase server...
Pointbase server stopped.
Here is the console output when 8.1 is running and I try and start 10.3 (edited as above):
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=256m -XX:MaxPermSize=512m -XX:MaxPermSize=160m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;<Cut for length>
PATH=<Cut for length>
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\bea103\JDK160~1\bin\java
     -client
     -Xdebug
     -Xnoagent
     -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
     -Djava.compiler=NONE
     -Xms512m
     -Xmx1024m
     -XX:CompileThreshold=8000
     -XX:PermSize=256m
     -XX:MaxPermSize=512m
     -XX:MaxPermSize=160m
     -XX:MaxPermSize=192m
     -Xverify:none
     -da:org.apache.xmlbeans...
     -ea
     -da:com.bea...
     -da:javelin...
     -da:weblogic...
     -ea:com.bea.wli...
     -ea:com.bea.broker...
     -ea:com.bea.sbconsole...
     -Dplatform.home=C:\bea103\WLSERV~1.3
     -Dwls.home=C:\bea103\WLSERV~1.3\server
     -Dweblogic.home=C:\bea103\WLSERV~1.3\server
     -Xmx1024m
     -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0
     -Daldsp.home=C:\bea103\odsi_10.3
     -Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl
     -Dweblogic.wsee.bind.suppressDeployErrorMessage=true
     -Dweblogic.wsee.skip.async.response=true
     -Dwcb.properties.url="file:///c|/bea103/user_projects/domains/WCB_Developer_Domain/app
     -parms/"
     -Dlog4j.configuration=file:C:\bea103\USER_P~1\domains\WCB_DE~1\apacheLog4jCfg.xml
     -Dweblogic.management.discover=true
     -Dwlw.iterativeDev=true
     -Dwlw.testConsole=true
     -Dwlw.logErrorsToConsole=true
     -Dweblogic.ext.dirs=C:\bea103\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_wli1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_cie670\profiles\default\sysext_manifest_classpath;C:\bea103\patch_alsb1030\profiles\default\sysext_manifest_classpath;C:\bea103\patch_aldsp1030\profiles\default\sysext_manifest_classpath;C:\bea103\wlportal_10.3\p13n\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\light
     -portal\lib\system;C:\bea103\wlportal_10.3\portal\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\lib\system;C:\bea103\wlportal_10.3\analytics\lib\system;C:\bea103\wlportal_10.3\apps\lib\system;C:\bea103\wlportal_10.3\info
     -mgmt\deprecated\lib\system;C:\bea103\wlportal_10.3\content
     -mgmt\lib\system
     -Dweblogic.alternateTypesDirectory=C:\bea103\wlportal_10.3\portal\lib\security
     -Dweblogic.Name=AdminServer
     -Djava.security.policy=C:\bea103\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Stopping PointBase server...
PointBase server stopped.
\Windows was unexpected at this time.
So I'm stuck, can any one point me to some documentation or anything at all to get me moving forward on this?
Thanks
John

Hi
Did you change this 8453 to someother value for one of the domains. This looks like a Pointbase DB Debug Port. First change main pointbase db port and then change this debug port value also in setDomainEnv.cmd file.
HTH
Ravi Jegga

Upload more than one files at the same time

Hi people!
I'm having serious problems with struts. I have a list of contacts in which I can upload a file per person. The problem is that I have an unique form and I want to upload all the html:file at the same time. Is there any way of doing that? The problem is that I can't retrieve the values in the actionForm as FormFile[ ] as the other fields.
I need help urgently!!

I'm not sure uploading several files at once is possible. I have yet to see anything like that.

Can you use iTunes match and not get duplicates if you maintain mp3s and aiffs files of the same song in either the same or separate libraries?

I maintain a collection of aiff files and mp3 files of the same music.
Aiff for home listening and Mp3 for my devices.
I can arrange these in the same or seperate libraires.
Will "itunes match" duplicate the songs in the cloud if they in the same or seperate libraies on the same mac?
If not, is anyone aware of how to manage seperate Mp3 and Aiff libraries so as not to get duplicates in itune match?
All assistance is appreciated.
Thanks!

Hello mracole,
I checked my "purchases" and the 7/19/13 purchases don't show up. However, the earlier versions from usually several years back...the ones that are Matched...often do show up in my Purchases. I suspect that somehow those REALLY purchased several year old versions were deleted and redownloaded by me so I could change them to the 256 kbps versions under iTunes Match. They were probably 128 kbps versions originally when purchased.
Why the earlier versions that were really purchased are now identified as Matched is puzzling.
Why I now have Purchased versions from 7/19/13 is puzzling too...especially since these versions do NOT show up in my purchases.
Calling Apple Support if a good idea unless someone can explain this mystery. I might even take one of my laptops to the Apple store and show a Genius.
Thank you very much for taking the time to respond, Mr. Luigi

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How can I unlock numerous files at the same time (i.e. photos) so I can make changes (rotate etc)?

Im using Lion on a MacBook Pro 15in (just under two years old) and I would like to know if I can lock numerous photo files at the same time so I can make changes to them. At the moment when I select an entire folder to go through and make changes, ie rotate in Preview, I am told with each photo that I have to unlock it. I am going through photos I took of archival material and have nearly 5000 photos to adjust and make changes to. This small step is taking up a lot of time.
I realise there will probably be a common 'sense' answer to this but it alludes me at the moment so any help would be appreciated.
Thanks

Try this: https://addons.mozilla.org/en-US/firefox/addon/fox-splitter/?src=ss
OR, open a second Firefox window (''Firefox button > New tab > New Window'' or ''Ctrl+N''), load the second site, resize windows side by side.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Trace and error file at the same time ?

Similar Messages

Maybe you are looking for