Trace the reference Standard movement type from customized movement type
Hi,
In my system there are few customized movement type.
Can I know which Standard movement type was used as reference to create the customized movement type.
try table t156 table .. put your mvt type and see the BUSTR field for the reference mvt
Similar Messages
-
Obtaining the full file path specification from Flash Movie and QuickTime icons?
How do you obtain the full file path specification from Flash
Movie and QuickTime icons? I want the path and the file name that
is contained in these icons. I am using a "dive" to run through the
icons of a file, and when I come upon these two types of icons, I
want to obtain the above information that is contained in them. I
certainly can look in the property dialog box to get this info, but
there are many icons in these files, and I want to generate a list
of info based upon the various types of icons that I am processing.
Thanks> How do you obtain the full file path specification from
Flash Movie and
> QuickTime icons? I want the path and the file name that
is contained in
> these
> icons. I am using a "dive" to run through the icons of a
file, and when I
> come
> upon these two types of icons, I want to obtain the
above information that
> is
> contained in them. I certainly can look in the property
dialog box to get
> this
> info, but there are many icons in these files, and I
want to generate a
> list of
> info based upon the various types of icons that I am
processing. Thanks
>
For Flash
Trace(GetIconProperty(iconID, #pathName))
for QuickTime
Trace(GetIconProperty(IconID, #filename))
For full scripting reference for each of these sprites, open
up the
Properties panel for each sprite and press the Help button
that appears on
the properties page ... or else navigate to these folders for
the Flash and
QT help
C:\Program Files\Macromedia\Authorware
7.0\xtras\FlashAsset\Help
C:\Program Files\Macromedia\Authorware
7.0\xtras\QuicktimeAsset\Help
You don't want to know how many times I asked Macromedia to
stop hiding that
Help!
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu -
Error while calling standard OAF page from custom Oracle Form
Hi,
I am calling standard OAF page from custom oracle form using the following code.
FND_FUNCTION.EXECUTE(FUNCTION_NAME=>'FUN_TRX_ENTRY_OUT_VIEW_BATCH',
OPEN_FLAG =>'Y',
SESSION_FLAG =>'N' ,
OTHER_PARAMS =>'&ViewBatchID = "' || NAME_IN('FUN_AGIS_LINE_D.BATCH_ID') ||
'&CallingFunction = "' || 'MANEXPINQ' ||'"');
But I am getting this error.
oracle.apps.fnd.framework.OAException: This request was not processed as the request URL %2FOA_HTML%2FOA.jsp%3Fpage%3D%2Foracle%2Fapps%2Ffun%2Ftransaction%2Fentry%2Fwebui%2FViewOutBatchPG%26OAPB%3DFUN_PRODUCT_BRAND%26OAHP%3DFUN_SSWA_MENU%26OASF%3DFUN_TRX_ENTRY_OUT_SEARCH%26_ti%3D1217029204%26language_code%3DUS%26%26ViewBatchID%20%3D%20%22203148%26CallingFunction%20%3D%20%22MANEXPINQ%22%26CallFromForm%3D%27Y%27%26oas%3DqZqg3tmdEdUNyw_HtskVow.. contained potentially illegal or un-encoded characters. Please try again by submitting a valid URL or contact your systems administrator for assistance.
Please let me know any thing I missed out here.
Any suggestion will highly appreciated.
Thanks & Regards,
SunitaI am using FND_FUNCTION.EXECUTE to call a OAF page from PLSQL in R12. I am getting following error"Error(9,23): PLS-00302: component 'EXECUTE' must be declared"
-
Hi,
I have a custom Step Type that contains Measurements property under Results. Its type is Array of NI_LimitMeasurement.
I would like to see the values in the sequence file documentation like NI_MultipleNumericLimitTest type.
Is there any trick to do that?
Thanks,
AndrasHi Andras,
I have made a slight change to the sequencefile 'docgen_txt.seq'.
In the Sequence 'Step Doc' is a section which handles MultipleNumericLimit step type. There is a precondition check on the step 'Add Multiple Numeric Limits' if the step is of type 'NI_MultipleNumericLimit'. As your step type is based on the MultipleNumeric Limit type, I have just removed this precondition and just relied on the existence of Parameters.Step.Result.Measurement. Equally you could add a new section in this sequence to handle your Custom Step Type which is only called when the precodition match your type name.
Now when you run the DocGen tool it handles your custom step type.
Find attached my modified sequencefile 'docgen_txt.seq'.
Just copy the contents of '..\National Instruments\TestStand 3.5\Components\NI\Tools\DocGen' to the User folder. Then place the attached file in the User\Tools\DocGen overwritting the version that is in that folder.
Then launch TestStand and try it out on your sequence file.
If you are using the html version, then you will have to make the same change into Step Doc sequence of the docgen_html sequence file.
Hope this helps
Regards
Ray Farmer
Message Edited by Ray Farmer on 05-19-2007 05:28 PM
Regards
Ray Farmer
Attachments:
docgen_txt.seq 184 KB -
Is it possible to create a customs declaration for the document which is cleraed from customs
Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivashi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh -
Return from customer movement type
Hello,
We use in our system 653 mov.type when we return goods from customer.
Usually we create the return order with reference to the original customer order and the original customer order is MTO (make to order) . When posting the 653 mov.type the system take the cost of the material (VPRS) from moving average price of unrestricted stock.
My question is : in cases that my return customer order is with reference to original customer order, is it possible to configure a movement type (or other way) that the system will take the cost from the original customer order and not from the cost in unrestricted stock and in advance it will affect the moving average price ??
I will try to explain by an example:
I have in stock 10 pieces each for 5 $,
My return order has 4 pieces that has cost of 8 $ in the original customer order.
The system behavior today after returning the stock with 653 mov type:
I have 14 pieces with cost of 5 $ - no change in moving average price and VPRS cost for profitability analysis is 5 $
The desirable behavior according to my expectations:
I will have 14 pieces with cost of (50+32)/14=5.8 u2013 the moving average will change according to cost in original customer order 8 $ and VPRS cost for profitability analysis is 8$.
I hope I made my self clear enough
Regards
IditHello Kishore,
Thanks for your answer.
I can understand the idea that MAP changes only in case of Purchase of material not at time of sales returns.
But I want to give you a case that causes problems in our view:
Most of my sale cases are MTO, that means that I buy for order and therefore my MAP will not be affect.
Example: my MAP 3 $ I buy to order for 5 $ and when I will do GR it will not affect the MAP (101E)
When I will return the goods (653) I want that the cost from vendor (5$) will affect the MAP because this was the real cost from my vendor but when I return the stock I return it to unrestricted stock.
I have cases that I transfer sales order stock to unrestricted stock and the MAP is change according to cost of sales order (411E/412E) u2013 it's the same in my logic - the MAP change according to the real cost from vendor.
I will be happy to have your response.
Kind Regards
Idit -
Movement Type from Customer owned Stock back to Plant Stock
Hi Guru's,
Is there a Mov. Type that allows you to transfer from Customer owned Stock back to Plant Stock, without creating any FI Documents? Please help thanks in advance CarloWhat is customer owned stock?
from my point of view it is any stock that you and others sold to this customer. not in your system at all.
If you want to get it back to your promises, then you have to create a customer return.
The customer return goes into return stock, this does not create any financial postings.
But if you transfer the retun stock into own stock, then you create an accounting doc with value (quantity * price / price unit)
You cannot create stock for a valuated material without any financial document -
When I retrieve returnpack from customer, stock type should be blocked
Hello,
When I retrieve returnpack from customer, I want stock type should be blocked. When I use standart movement type 622, stock type is unrestricted use. Are there any way for this? I couldn't find any movement type which retrieve returnpack stock from customer stock (for example 622v) to storage location stock (for example 622).
Best regards,
Yasar UnalpBADI ME_PROCESS_PO_CUST .
here you can add the Logic . -
Created column not showing in the Document Library View for a Custom Content Type based on Document
We have a custom content type based of Document Content Type. The OOTB "Created" column does not show up in the view as well as in the Site Settings -> Columns.
But it shows up in the Display Form and Edit Form of the Item at the bottom "Created at " by " " and "Modified by" at by ""
Would anyone know how to make this column appear as part of the view ?
thanks,
HarshHi,
They should by default be possible to add to a view. The only reason they would disappear from the UI if someone has changed the attribute of the Field to hidden = true. You can verify that with PowerShell and if so you can use PowerShell to revert the setting
to false.
$w = Get-SPWeb http://dev13$f = $w.Fields.GetFieldByInternalName("Created")$f.Hidden$f.Hidden = $false$f.Update() -
How to call standard ITS service from custom ITS service
Hi,
I have a requierement in ITS where I need to call standard ITS service(CATW) from custom service upon clicking on Accept button. how to achieve this?
Thanks in advance.Hi Sarada Nukala,
You can call the service url from first service button. To get this url, from SICF transaction, test service and a browser is opened.
Hope this helps,
Iván. -
Can I keep the reference point in indesign from changing?
Not sure I'm in the right forum here, but here goes--I'm working in InDesign5. I have to place 100's of scans into boxes in a single layout, and often have to adjust size by percentage (using shift-command-< or >) after they're in the box. My issue is with the reference point changing with each scan. I'd like to set it to one spot and not have to reset every time I place a new scan, which obviously becomes tedious and time consuming. Any thoughts?
Thanks!
Nita ReddyActually, these are my own documents, originally built in Quark (several years ago) and updated on a basically yearly basis.They're not exactly templates, but working documents.
Have you ever exported this file to INX/IDML and re-opened? That's a really normal corruption-clearing first step when handling InDesign docs, and you have two different features of your doc (started life as a Quark doc and converted into InDesign, and then updated from one version of ID to the next) that can sometimes induce corruption. One instance where I always export INX/IDML is when I'm moving a file from an older version of ID to a newer one, as when you moved from CS4 to CS5.
But, honestly, I can't tell whether your document is showing signs of minor corruption, or if your install of InDesign is Functioning As Designed. Does it remember which corner is active from copy to copy? Is it getting the active corner from whatever element was on top before you grouped? Is copying and pasting somehow messing it up; would it happen if you used File -> Place? Is it remembering from the source document? As you can imagine, I'm sure, there are plently of permutations to test.
Lastly, note that setting the reference point before you open is only going to affect new documents that you start fresh - your frequently-updated ex-Quark docs will not be affected when you choose a new default corner with no docs open. It would be whatever corner was active when you first converted your doc from Quark to ID, however many years ago that was.
If you want to continue troubleshooting, I'd suggest posting a new thread in the InDesign forum (which isn't broken anymore). If you supply a link to this thread, or summarize what we've already discussed, you probably won't have a bunch of people telling you to export IDML and re-open. -
Movies disappearing from "My Movies"
I have a lot of movies on Apple TV but lately some have been disappearing from "My Movies." They're still in my movie library in iTunes. So to correct this I have to go to my library, remove it, re-add it, then sync. This solves the problem but it's annoying I have to do this at all, especially since this is a new problem. Anyone else seeing this?
OK, I think I'm sorted. I have to tick as selected in my library, then they synch, as someone's mentioned on another thread. I'm not sure why this suddenly started occuring as I don't think I changed any settings, although I did by a Touch (great)- prob a coincidence
Thanks to all. -
Move fields from Custom Tab to Standard Tab.
Hi all,
I have created one field through EEWB.The NewField is Displaying In the new tab 'CUSTOM TAB' Now i want to move this field to standard tab. I am using CIC0 tcode ( Service Contract ) pls. help me ....for moveing fields from one custom tab to standard tab.
Thanks Inadvance,
Siva Kumar.BHi Siva,
I think you need standard modification to do it.
Regards.
Manuel -
Error while calling standards OAF page from Custom page
Hi,
Using personalization, from a custom page, I am trying to open a standard Iexpense page using the following inthe Destincation URI in messagestyledtext as
OA.jsp?OAFunc=OIEMAINPAGE&startFrom=ActiveSubmitted&ReportHeaderId=380705855&OIERefreshAM=Y
The original page has OA.jsp?OAFunc=OIEMAINPAGE&startFrom=ActiveSubmitted&ReportHeaderId={!ReportHeaderId}&OIERefreshAM=Y in the message styled text
But when click on this from the custom page, the page opens with tabbed regions above and then gives error as below. Please let me know how to resovle this issue.
Profiles 1) FND_VALIDATION_LEVEL and 2) FND_FUNCTION_VALIDATION_LEVEL are already set to None.
Error is:
Page Security cannot be asserted. The page has either expired or has been tampered. Please contact your System Administrator for help.
Thanks,
SrikanthHi,
R u still facing the issue?
If So can you please tell me:
Have u added your called function to the current user? That means by navigating to the responsibility you can access the same page directly, with out doing any transaction? If so then create your custom function with your required URL and attach to a menu ; then check if you are able to view that page from the menu navigation?If these thing is not working then I think you need to create a custom page that will extend the std region , that time hopefully it will work.
Please post your result/thought!!
Regards
Apurba K Saha -
When trying to use a custom Windows Runtime component in a desktop application, a TypeLoadException is thrown.
Why aren't custom Windows Runtime components supported in desktop applications? Is this something that will change in the future?
Thanks,
Tom
luck favours the preparedIf you are targeting the .NET Framework 4.5 you could try to add a <PropertyGroup> element to your project file and a reference to the WinMD file as described here:
http://stackoverflow.com/questions/12136585/using-custom-windows-runtime-components-in-non-metro-applications
Thefull list of the WinRT classes that are available to desktop apps is available here:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh920511%28v=vs.85%29.aspx#windows_runtime_classes
Please refer to the following links for more information:
http://msdn.microsoft.com/en-us/magazine/jj651570.aspx
http://stackoverflow.com/questions/12745703/how-can-i-use-the-windows-ui-namespace-from-a-regular-non-store-win32-net-app
https://software.intel.com/en-us/articles/using-winrt-apis-from-desktop-applications
Please remember to mark helpful posts as answer and/or helpful.
Maybe you are looking for
-
I have a PDF that I made from a paper scan using my Fujitsu ScanSnap. Then I ran Acrobat's OCR on it. I then deleted the original unOCRed PDF and threw away the original book I had scanned. Now I've discovered that my B&N Nook e-reader tries to displ
-
BADI_BUILD_MESSAGE + IDOC numbers required
Hi, I am setting up an alert notificatio in solution manager for IDOCs. It is working fine. But the requirement is to extend the functionality and add idoc numbers also in the same mail alert. I found a BADI "BADI_BUILD_MESSAGE" for this purpose.
-
Dear all, I wonder how to add a selection screen in order to display all the open item I selected for a given vendor in a different view mode. Currently if I choose from FBL1N (after having executed a select on open items for a given vendor for insta
-
RSMO: Health Check Error ORA-16820
Hello Everyone, I'm trying to troubleshoot this weird error in our DG setup. I have FSFO enabled and observer running. However, when i check the status of standby database with show database 'stdby', i get ORA-16820, however, i do the same for primar
-
Please i am begging you for help!!!!
I am using Photoshop Elements 12 on a laptop. All of a sudden while I was working the move tool decided to vanish and not leave a forwarding address, Rude I know!! I have restarted my laptop, uninstalled and reinstalled, which has only me wanting to