Track Original Document through Follow Ups

Hi, everyone, I´m working with follow ups and I have a doubt about the follow up process. I have a process flow where i have one original order with one follow up document, this follow up document may have his follow up document too, the thing is that I need to save in the third follow up document the orginal document id that iniciate the process flow, I´m thinking in the CRM_COPY_BADI to track this, any suggestion about this solution will be appreciated,
Edited by: Isaac Mena on Sep 15, 2011 9:32 PM

Hi, thanks for your reply,  I already test a local report with a loop and a CRM_ORER_READ logic, I´ll see if the ORDER_FLOW FM, will help me to clean up my code. Thanks a lot, then I decide to set in the CRM_ORDER_SAVE badi and make sure every new document will have this reference.

Similar Messages

  • Managing Document Status at Original Document Levels

    Hi dms gurus,
    i know that we can manage the document at DIR level through the status, and create new versions of documents where the old version is kept with no change allowed.
    However, in the version how one can esily know what changes been done to the originals ? for example, i'm to release a certain document, but don't know what originals been added, what originals been deleted, and what originals been modified ? unless i refer to the old version and compare, which is not practical specially when a document contains quite large number of originals.
    is there a way to control such ? is there a way to control dms at original doc levels, for example any approved original document can no longer be deleted, etc...

    Hi
    To keep the track of changes made in Original, you can make use of '"Content Version"
    You have to enable this setting in dc10 inside the status of the Doc type.. Everytime you change the original file in that particular status , it shows a Content Version of the same. You can see the different "content Versions" in tab original of DIR.. You even have the option to activate whichever Content Version you want to see by default...
    This is different from normal versioning .. as everything is stored in the same version of the DIR.. for eg.. 00
    Regards
    Aby

  • PA30, attaching documents through the employee personal master dat

    Dear freinds,
    We are attaching documents through the employee personal master data
    PA30, Our client wants to know where exactly these attachments are
    getting saved; Our SAP environment is ECC6.0 on AIX 5.3. so i exactly would like to know what is the exact path where these documents are getting saved on AIX machine.
    I would appreciate if you can tell us where exactly these documents are
    getting saved at OS level, any particular file system you think,
    because I probed in but couldnu2019t find where exactly there are on the
    OS..
    Regards
    ayush

    hello,
    SAP generally recommends that you store employee documents with a bar code. You can find the documentation to 'Storage Within Personnel Administration' using the following path:
    => Help => SAP Library => Human Resources => Personnel Management (PA)=> Personnel Administration (PA-PA) => Storage Within Personnel Administration (PA-PA)
    In the SAP Standard it is not possible to tie original documents to specific personnel numbers in the PA30 transaction. The only exceptions are two specific scenarios where you can tie original documents in the PA30 transaction:
    1. late storing with bar code
    2. late storing without bar code
    During both scenarios you start out in the Trx PA30. If the bar code entry is deactivated the actual key data will have to be transferred to the document in any case, otherwise you will be asked to enter a barcode again. Therefore the document would be transferred to the scanning location and then assigned to a specific business object.
    Unfortunately it is NOT possible to upload a document directly into archive in the PA30 any other way.
    Let me emphasize once more that PA30 can not be used for storing infotype specific documents. Via the special scenarios mentioned already by my colleague you are able to assign documents to the specific infotypes but the storing has to be completed outside of PA30.
    Using the option Extras -> Assign facsimile in PA30 will be interpreted by the system as start for late scanning with barcode thus the error message.
    Hope this help
    Sarah

  • I am using my ipad 2 ( bought in USA)  for about 3 years. 2 weeks back the touch gesture was completely out of control and the screen  was jumping automatically to so many applications. I attempted to get original settings through settings menu, but unfor

    I am using my ipad 2 ( bought in USA)  for about 3  years. 2 weeks back the touch gesture was completely out of control and  the screen  was jumping automatically to so many applications. I  attempted to get original settings through settings  menu, but unfortunately while resuming when I typed a pass code the  touch gesture , without control it  typed unknown passcode and while  confirming the passcode as well same thing happened.
    Now my Iapd2 is disabled and itunes also not recognizing my ipad.
    I kindly request you to help me to fix the issue. 

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Error: While posting a G/L document through TC F-02

    Hi Friends,
    i am trying to post a G/L document through TC F-02 its giving the following Error
    "There is no item category assigned to G/L A/C No 20020/COA BCS.
    can any one help me out,
    Thanks
    RK

    Hi,
    When you are working in ECC 6.0 for the first time you will get this error.  Just go to SPRO search for Document Splitting and deactivate in new G/L
    If OK please assign points !!!!
    Srinivas Kommu.

  • ABAP Runtime Error at the time of saving of Document Through CV01N tcode

    Dear Experts
    We have install seprate DMS Server for storing various documents of different module.
    While saving of Document through Transaction CV01N one small screen gets pop up.Which is as follows
    Check in Document:KPro
    Storage Category   Description
    ZCITY123               DMS
    I am selecting above line from Kpro, then when i click on save system gives ABAP Runtime Error.
    Runtime Errors         CALL_FUNCTION_NOT_FOUND
    Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          21.10.2008 18:35:26
    Short text
         Function module "PROJECT SYSTEM" not found.
    What happened?
         The function module "PROJECT SYSTEM" is called,
         but cannot be found in the library.
         Error in the ABAP Application Program
         The current ABAP program "SAPLSDCE" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    I am not understanding why this dump is coming.
    How i can come up from this issue.Pls guide me.If any customizing is required pls give the steps
    Thanks in Advance.
    Regards,
    Sandeep Theurkar

    There is a programming error somewhere.To get a solution quickly, do as follows:
    1. Turn off all badi's, user exits and whatever you have changed in standard SAP.
    2. Rerun - if it still fails - search in SAP notes for relevant notes
    3. If it doesnt fail - you have an error in your own programming
    4. If you are on relevant Support packages etc, send a message to SAP.
    Regards,
    Espen Leknes

  • To set payment block to 'A' in F-59 transaction on the original document.

    When I run the transaction f-59 for a document, my requirement is that I should set the payment block to 'A' for the original document.
    I tried using the BTE - sample_process_00001120, but it doesn't seem to update the value for the original document or the current document that gets posted.
    Kindly suggest how i can handle this.
    Thanks in advance.

    Hi,
    Try the following BTE's for changing the Payment Block for the current document. Change the value T_BSEG-ZLSPR.
    00001020     POST DOCUMENT:       Prior to final checks
    00001025     POST DOCUMENT:       Final checks completed
    00001030     POST DOCUMENT:       Posting of standard data
    00001050     POST DOCUMENT:       Accounting interface
    Think that for updating the payment block in Original Document, we should try with some FI document change BAPI.
    Regards,
    Harish

  • How to get number document of Original documents

    Hi all !
    now I have a request how to obtain original documents. Specifically as follows:
    I have an Invoice 1. I'm partial payment for that Invoice. The system generates a new invoice and it will be the clearing document for an invoice. Then I continued to make a payment more than once.
    How can I get an invoice number of the document?
    If you have a solution or experienced this problem. Please just help me.
    I would just appreciate your help. Thank you very much.

    My specific requirements are as follows:
    I have Invoice_1 with a value of u20AC 10,000.
    I use T-Code F-02 to make Payment_1 enter the value 1000 EUR. Then Using Residual Clearing (F-32) to make clear the Payment_1 and Invoice_1.
    After making clear, the system will generate Invoice_2 with a value of u20AC 9,000.
    In the database of the system will be Invoice_2 Document Clearing of Invoice_1. How to document from the number of Invoice_2 I know the document number Address Invoice_1.
    Note: This is just a simple case because only a Payment was made. In fact there may be many times the payment should be made by the clearing document was very difficult.
    I want a solution that actually simple enough to know number Address document of the original documents from the document by Clearing document number.
    Thanks !

  • Unable to view documents through Adobe Reader

    Hi,
    The following are the softwares which we have installed.
    1. Adobe Reader - 7.07
    2. Adobe Acrobat Professional - 7.0
    3. Adobe LiveCycle Designer 7.1
    4. Adobe LiveCycle Forms 7.2.2
    5. Adobe LiveCycle Form Manager 7.2.2
    6. Adobe LiveCycle Workflow - 7.2.2
    7. Adobe LiveCycle Reader Extensions 7.2.2
    8. Adobe LiveCycle Policy Server 7.2
    We have performed Turnkey installation on all the above mentioned softwares.
    We are facing some issues in viewing the policy documents through Adobe Reader.
    We have created a Policy through the Policy Server. Then using Adobe Acrobat Professional we added this policy to a document.
    But when we try to view the policy added document through Adobe Reader, it is throwing the following error.
    "You are attempting to connect to a policy server using an insecure protocol. The connection attempt has been cancelled. Please contact an administrator for assistance".
    In one of the installation documents of LiveCycle products, it is given that we need to enable the SSL while running the Configuration Manager. But since we have done Turnkey installation the SSL enabling option did not appear in the installation wizard.
    Can someone please let me know how to enable the SSL using Turnkey installation.
    Regards,
    Suraj

    The guide Chris mentioned talks about setting up SSL, but you need to import the certificate into the "trusted root CA" store in Internet Options on every machine which will open the document.<br /><br />You probably have got the SSL set up correctly, but just to emphasise there should be absolutely no warnings what-so-ever in IE when you hit the https://hostname:8443 address -after- closing and reopening the browser, and it should show the Padlock symbol to indicate the SSL is on.  In my experience this means that the first part of the CN must be the exact hostname which you will access the server to avoid the "cert doesn't belong to this host" error which will appear in addition to the "untrusted CA" error.<br /><br />And if you are using the server in production where clients may not have permission to add trusted root CA's then you will need to use a proper SSL certificate.  This guide worked for me:<br /><br />http://blogs.adobe.com/livecycle/2006/10/configuring_jboss_325_with_a_r.html<br /><br />(p.s. I'd recommend NOT using any symbols in the keystore password, or you may have to change it to get it running with JBoss)<br /><br />______________________<br /><br />Once you are absolutely sure the SSL is spot on, this is the step which you may have missed:<br /><br />On the Policy Server administration panel, go to "Configuration" -> "Server Configuration", then update the base url.  It should look like:<br /><br />https://<cn_on_ssl_cert>:8443<br /><br />Once you've updated that address, you will need to reapply any policies, since the server address is stored in the PDF document itself.  Don't forget to update the policy server address in Acrobat too.<br /><br />Hope that helps,<br /><br />Robert

  • Data loss in original documents

    Hi, we are running R/3 46C with DMS.
    Typical functionality is as follows:
    Using the online vault (ftp server), we checkin and out the originals from the DMS. We use MS Word/Excel as workstation applications to create/update the originals. e.g. the original is checked-out and opens as a MS Word document within the SAPGUI (Inplace DM configuration). A temporary copy is created on local workstation. Employee then updates the original and does a 'save and exit'. This checks the original back into the vault, deletes the local copy from workstation and exits the transaction.
    The issue is as follows:
    Person A opens the original, updates it and saves and exits. Person B (or the same person A) opens the same original document within couple of seconds or so after person A has saved and exited. In this case, person B doesnot see the updated content. So person B has no clue that the content was updated. If person B updates the content and saves it,
    the content updated by person A is lost. There seems to be a performance issue resulting in potential data loss. The trace files for sapftp indicate good performance without any timeouts etc. between the workstation and the online vault (ftp server).
    Not able to nail the cause. Any ideas or suggestions will be appreciated.
    Thanks
    Nirmal

    Hi Iring,
    I appreciate your suggestion. I think I understand it, however, in my case, the issue is after the original is checked into the vault. Once a user has updated the original and checked it into the vault (using 'save and exit' button), the transaction ends successfully, with a message "Document Info record <doc typ> <doc number> changed". This gives an impression that the original has been checked-in and the contents have been saved. If I open the same original within couple of seconds of the first save, the original does show as checked-in. However, intermittently, I would not see the content that was changed as part of the first save.
    The ftp log shows no errors and indicates good performance.
    Regards
    Nirmal

  • Links within PDF document open linked PDF documents, but seem to replace original document rather than as additional documents.

    Hello good people of the Adobe Community!  I have a user of Adobe Reader XI that is having the following problem:
    She is viewing, what we will call, the "main document," and this document has many links to other PDF documents.  When she clicks on one of the links, the main document gets replaced by the new document.  She then needs to re-open the main document to view it again.  This happens with every link she clicks.  I worked with the document in Reader XI and am able to open every link as an additional document, thus allowing me to immediately view both the main document and the new document.
    My questions are:
    Is there some setting in her Reader that I do not have turned on/off, which is why she is having this issue and I am not?
    If not, then why is the user experiencing this "replacement" of the main document?
    How do I help her resolve this issue?
    Thank you for your time and attention.
    Ben

    I don't know if there is any way to configure this in the Reader preferences.
    However, it can be decided in the document itself.  I just created a test document (using Acrobat DC) with two links:
    one to open in the same window
    on the open in a new window
    Both links do what I selected:
    one opened in the same Reader window (replacing the original document)
    the other one opened a new Reader window
    When creating the links there was actually a third option: Window set by user preferences.  However, I cannot seem to find such a user preference in Adobe Acrobat Reader.  The default (in my case) seems to be to open in the same Reader window.

  • Files saved on memory stick on pc show as original file name followed by .XML and i cannot open why

    files saved on memory stick on pc show as original file name followed by .XML for example tester.doc.XML, is there any reason?  I cant open these on mac, if i put it back in PC is shows file as normal without .XML.  Confused.com any ideas.

    I have files on my work laptop (PC) e.g. document1.doc (word document), I then save it to my memory stick (which i have reformatted, I also tried my external disk drive) and then take that to my macbook, plug it in and in finder it then shows as document1.doc.XML, which i cannot open.  It happens to all types of files, it just seems to add .XML on the end of everything.

  • Original document for foreign currency valuation.

    Hello All,
    I have executed the foreign currency valuation run and posted the documents through batch job. System has successfully created and posted foreign currency document.
    When I am checking the posted document I found there is some wrong posting has been happen for which system has posted a huge exchange rate difference amount.
    when I tried to check the original posting related to this posting through Environment -> Document environment -> original document, system is not navigating me to the original document instead it is showing same posted document.
    Can you please let me know how to check the original document related to the document posted through batch job of foreign currency valuation.
    Regards
    RS

    Hi,
    In that screen itself, select the Document---->other Document. In that give the Orginal Document Number, then it will display the orginial document with foregin currency and local currency.
    Regards
    Sudharsan.R

  • Original document in Balance Sheet Readjustment run

    Hello
    After running the Balance Sheet Readjustment run  when I am checking the log through F.5F - Display Log System is giving the document number after posting the transaction . How can I know the original document relevant to the adjustment posting for dummy profit center. Where can I trace the original document.
    Please let me know the T.code or the procedure need to be adopted in order to view the original document.
    Regards
    RS

    I understand you are asking for original accounting document which are regrouped with F.5D  .
    If you know the original document, with FB03, go the the document environment in the Menu and click on balance sheet adjustment, you can find out the balance sheet adjustment document #
    Otherwise, in the log it self you can search for original document with Ctrl F by giving the document number

  • How to create shipment cost document through BAPI?

    Hi SAP Guru,
    My requirement is to create shipment cost document through BAPI.
    Is there any standard BAPI to create Shipment cost documents? If any buddy no please help me out.I am in client place i have find out the solution..
    Thanks & Regards,
    Pankaj Sinha

    Hi Pankaj,
    See the following link for more help.
    IDOC/BAPI for changing Shipment cost number/document
    Regards

Maybe you are looking for