Tracking and maintaining data about modifications done to Standard SAP code

Hi All,
I need your help to know if there is a way to track and maintain the modification changes done to standard SAP code. I have gone through SE95 but not much help. Is there any DB tables which stores these information after a standard SAP code has been modified like for example when the core Mod was done, transport number for the MOD, object in which the MOD was done, version of the object etc.
Thanks in advance.

Hi,
Try the following tables.
SMODILOG & VRSD.
Regards
Kiran Sure

Similar Messages

How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.

Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki

What is my best option for a family plan. We have 1 smartphone that uses very little data a usually wifi is avaiable and 3 basic phones. Currently we have 700 shared minutes and unlimited texting. And 30 data. I don't think he needs that much as wifi is e

What is the best family plan option. Currently have one smart phone with 30gb of data and 3 basic phones. Also have home phone for $20/month. Current plan is 700 shared minutes and unlimited texting. My bill is close to $200/month, looking to lower if possible.

On a tablet- pse forgive typos....
Great Advice given earlier by SuzyQ - I believe the question not asked of you is ---what do you want to pay for the services that you need. I think that it would narrow the groups suggestions if you could narrow your needs.
For example: I need talk and text on 4 phones and some data say, 2 Gig, on only one of the phones. what plan is the best cost for me? You may also need to ask what the cost may be to switch to a different plan. I suspect that there will be no cost within Verizon-but ask anyway.
I do not think that you can have a smart phone on any Verizon plan unless you agree to buy data for that phone. Also, you said that wifi is often available-however, I do not believe that Verizon allows talking over wifi without consuming airtime minutes-only data over wifi avoids your allowance to be impacted.
As most here already know, several other service providers offer wifi-friendly service (talk/text/data) that will provide home/business/restaurant service without impacting your allowance- just not here.
After getting some suggestions here, call 611 and confirm availibility and price.
Best of luck in your research.

Reading data from a Table Cluster sans SAP code

I need to read data at the database level from a cluster table. That is to say, I want to decompress the VARDATA column that is in
the database table and interpreet it with my own code.
I've read all the SAP help documents on the subject, and I have created a test Table Cluster (the physical object) and associated test Cluster Tables (the logical tables) with the Table Cluster, but the data is compressed at the at the database level and incomprehensible.
I realize one can use ABAP and OPEN SQL to read the table, because that goes through the SAP database interface. I could
also call a BAPI from an external program, but I don't want to do that.
I need to read the data directly from the database without going through the SAP database interface or calling any SAP code. I
am willing to write the required code in another language, I just need to know how the data is compressed in the cluster, so I can
decompress it.
1. Does anyone know how to decode the information stored in a table cluster WITHOUT using SAP code?
2. If no one knows how to do (1), does anyone know what compression algorithm SAP uses when storing data in the table cluster?
3. Is there a specification or layout that explains exactly how the VARDATA column in a table cluster is structured, so that once I
decompress it, I can figure out what data belonged to which table and column?
If you even have a guess as to the compression algorithm or layout of VARDATA, I would be interested to hear it.
Thank You,
Larry Smith

Hi All,
The question is still open, waiting for points to be awarded. Fidel's answer didn't really help. I already know that I currently can't read the cluster, that's why I posted the question.
I would think SAP uses a known compression algorithm for the clusters, so the most important thing is finding out what the algorithm is, and finding out if SAP does anything weird to the compression headers.
Someone has to know out there!
Thank You,
Larry Smith

Modification in standard SAP code.

I want to modify a standard SAP program. THe Tcode is MM01. I want to add a new screen with few fields when the tabstrip control is 'accounting2'. Iwant to find the tab no for the same and writethe new code for it.
please help

hai Archana,
Hi Try This Once .
It Is ver EASY Procees.
Just Go To SE84
Give The PRogram Name Or PAckage name In Which MM01 is present.
Then Click On Display.
Then Click On Enhancements.
Then U will Get USer Exits Aswell As BADI 's.
IF Found helpful Reward.
Regards
Eshwar

Forcing customers to pay for a phone and/or data package they don't want or need

By their practices Verizon is forcing customers to pay for more than what the customer wants or needs, and at the same time giving the customer less of what they want or need.
I've been a Verizon Wireless customer for years. Everytime my 2 year upgrade is due I check what phones are available. It seems that as time goes by there are less and less Basic Phones with a qwerty keyboard, music player, good camera, and video. Now, there are only 3 phones to choose from that don't require a data package: none of them have a camera over 1.3 megapixels, none have video, and ALL had HORRIBLE customer reviews. Those reviews tell me I'm not the only disgruntled Verizon customer.
I've had Verizon phones that I liked in the past; right now I have a Blitz. I settled for that one because it was the best of the few bad choices available at the time. My most recent 2 year contract has been over for 5 months so now I'm on month-to-month with no contract, which is awesome. But my phone, which I like for the most part, doesn't work right.The problem is the earpiece speaker quit working as soon as my contract was up (maybe a software timebomb to force me to get a new phone?) so I took it to a repair shop to get it replaced. They replaced it but that speaker died after 2 months and since the phone has been discontinued (grr!), there is NO chance of getting a new speaker. That wouldn't be such an issue if the Bluetooth function had ever worked, which it never did. I recently broke down and decided I'd settle on something, so I tried the KinTwo (one of my 3 choices) but it sucked immensely so I sent it back.
So now I'm forced to buy a phone (with Some of the features I need, because it's obviously impossible to get ALL the features I want/need in One phone) that I don't like; AND pay for a $10 -$30 data package which I don't want or need, and can't afford; AND forced to sign up for a new 2 year contract. I'd rather go with Pay As You Go because I barely use any 'minutes' (I do more texting than talking, which is why I need a good qwerty keyboard) but I'd have to pay over $350 for a fairly decent phone.
HEY VERIZON, How about providing more than 3 choices of phones that don't require a data package? And how about making those phones GOOD QUALITY and not the garbage you're providing for sale now?
I'd like to stay with Verizon because they DO have the best service area compared to the other Big wireless phone companies . I've been with AT&T and the service area is really not as good. I even did comparison research for a college course's Final Project because I wanted to know which company had the more truthful claims about their coverage area. I live in the Sierra foothills and reception is a big issue with a lot of people here. I've talked with customers of the other companies and they all agree I should stay with Verizon. But if Verizon can't offer any good phones then I might as well switch to another carrier who may have more concern for their customer's needs. Even after giving us few choices of devices, charging high prices, and gauging us at every opportunity, they give us less incentive to stay a loyal customer. At least AT&T has roll-over minutes, Criket has 'no contract' service, and TracPhone has no contract/Pay as you go service with inexpensive phones.
So please excuse me while I go to the other carriers' websites to see what they're offering...

JF2mad wrote:
Marilee
You are spot on. Verizon wants to squeeze every dollar it can from it's customers and customer service can take a DISTANT back seat to greed. I have a Chocolate Touch which I got a few years ago(before it REQUIRED a data package). I had activated a different phone which I ended up not liking and when I tried to re-activate my Chocolate I got slammed with the required data crappage..er package. I had to fight to get the data BLOCKED and the phone activated again.
Wifi is all over but all the phones that have Wifi that Verizon sells require data packages too. I REFUSE to give Verizon $30 minimum for data when I have no need for it. If they had ANY CLUE about customer service they would simply allow you to buy whatever phone you wanted from them(or others) and activate them with data blocks.Until they do I guess I will either be stuck with my old phones or go provider shopping. Which I am sure Budone will find great satisfaction in.
On that topic. I am amazed that Versizon sits back and lets your apathy and disrespect of ANYONE who does not kowtow to the company line as they seem to. You are a "gold user" so clarly you are some sort of Verzion demi-god. Gotta say, there is not one word of disrespect in what I wrote. I do not puke on anyone, BUT I do present a different view than you or the OP may be willing to see with your, "Woe is me, have pity on me, and let me do what I want, if not involve the government to protect myself from myself attitude."
If you took time to look at posts of mine, I have had VZW in my crosshairs a few times, but they made it right. All in how you present yourself. Personally, I am willing to bet that corporate suck ups like you are the very reason many people finally DO make the break from Verizon. Your habit of puking all over people with legitimate complaints and the tolerance of same on this board lead ME and I am sure others to feel that your dismissive attitude is acceptable to, if not encouraged by Verizon in General. And yes, I have been edited in the past. But there was NOTHING in my prior post that has anything you state in it. You just dont like what I said. That is not towing the company line, that is knowing it costs a Ton of money to get a new deivce to market and data plans helps recoup the cost and allows upgrades and LTE to be deployed. You would be upset if you could not use your phone where there is NOT any WiFi.
Even though I have had issues with Verizon's service and corporate paradigm(especially the companys determination to exthort every penny it can from me), almost every Service Rep I have spoken to has been considerate, friendly and helpful. There have been one or two who, when I broached the possible need for finding a new provider, seems unconcerned, but in general I have been made to feel valued by the people I have spoken with. {please keep your posts courteous}
As for the demi-god comment, maybe I can get a MOD or ADMIN to change me from Gold to that!

TrackControl, Change Track, and others questions about AvTransmit

Hi there,
I've got multiples questions about JMF and AvTransmit, hope you will help
For a small student project, i'm developing a streaming server using JMF, i have used the AvTransmit example.
Streaming, etc... everything work fine, i stream music over web
But i need help with "playlist" :
// Get the tracks from the processor
TrackControl[] tracks = processor.getTrackControls();
First Question :
The Processor use a MediaLocator to get one track, is there a way to indicate multiples tracks, such as a directory containing multiples audio file ?
At this time, i can only set 1 file in the MediaLocator.
I'm using a simple class as Playlist (a File[]), and, when i want to change song, i stop the thread, change the MediaLocator with another file, and restart the thread.
It works on a Lan, but on Internet, Player (I use VLC for my test) lost the connection, i need to restart VLC to get audio again.
Second Question
Is there a more "elegant" way to change tracks ?
Last Question
I have think about building my own object Playlist... gasp...
I've look at the javadoc... but i'm a bit lost... does my class have to implement TrackControl ? what are the object inside etc...
If someone knows information about this...
That's all ;)
Thanks !
Tommy, french student (sorry for the english)

First Question :
The Processor use a MediaLocator to get one track, is there a way to indicate multiples tracks, such as a directory containing multiples audio file ?
At this time, i can only set 1 file in the MediaLocator.No. The processor uses a MediaLocator to get one file. Files (can) contain multiple tracks.
You can, in fact, combine the tracks of multiple files together, but, there's no need to do that with your application. AVTransmit2 sends each track as a separate RTP stream, so you'd just be sticking them together just to pull them apart again.
In general, you want to keep your architecture as one processor per file, one RTP stream per track.
Second Question
Is there a more "elegant" way to change tracks ?Yes. It's what I refer to as a jukebox DataSource. I discuss it / explain the concept on this previous thread.
[http://forums.sun.com/thread.jspa?forumID=28&threadID=5400318]
What you're essentially doing when you change the MediaLocator is starting over from scratch. You end up with a whole new DataSource, whole new Processor, whole new RTP session. On the LAN, this isn't an issue because it looks like you paused the RTP session (because the IP/PORTs don't change).
Over the internet, though, when you stop sending and restart, you're very likely going to get a new public NAT port. And so when your stream gets to the client, it's going to look like it's from a different person than the original.
The solution is to use the jukebox datasource to change the media without restarting the Processor or the RTP streams. That'll ensure that your stream won't move between files from the perspective of the client...
Last Question
I have think about building my own object Playlist... gasp...
I've look at the javadoc... but i'm a bit lost... does my class have to implement TrackControl ? what are the object inside etc...
If someone knows information about this...Ummmm, your "Playlist" object should just be a Jukebox datasource, so follow the link and figure out how that's supposed to work. If you have questions about it, just ask 'em here (rather than on the older thread)...

HT2404 How long should it take to download combo 10.7.4 OS to my pro book.I bought it a year ago and it has Lion. It has. Been downloading for almost 12 hours and is only about half done. I am also downloading an iTunes update. I am using wifi.

Trying to download OSX Lion combo plus iTunes update.taking 11 hours so ar.i am using wifi and am also plugged in to a power source.My Probook is a year old and has Lion.

What happens is that the weaker the battery, the less time it takes it to charge (and run down) because it doesn't take long to reach its lowered maximum capacity.
Although I never worry about my battery and leave my portables plugged in most of the time, that isn't necessarily the best thing for the battery.
Check out Apple's suggestions maintaining battery life and lifespan:
http://www.apple.com/batteries/notebooks.html
Information on battery technology:
http://www.apple.com/batteries/
Calibrating the battery for best performance:
http://support.apple.com/kb/HT1490

Running Windows Terminal Server 2003 with old version of Adobe. got the message it was no longer supported and it stopped working. Trying to install XI and it gets about 70% done and stops. Ran the cleaner on the 9.3 version to remove it. We use this

Installing Adobe Reader XI and it is stopping at about 70%. No error, it just stops. If I hit cancel and try it again, I get the 2203 error.

You are right: CS5 installs Flash Player 10.1 beta. You cannot install an older version of Flash Player unless you completely uninstall the beta version first:
download the 10.1 uninstaller from http://labs.adobe.com/downloads/flashplayer10.html#uninstallers and save it to disk;
from a Command Prompt, run the downloaded uninstaller with the -force option.

I recently last night installed ios 7.1.1 and it was about halfway done and everything went black and now nothing on the phone is working what does that mean?

help

Hey RayRay441998,
Thanks for the question. If you are experiencing issues when attempting to update your device see the following resource:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Copying tracks and content between projects

I have 4 different projects in Logic 8 and I want to combine them all together into one big project including the tracks and automation data. Is this possible?. I have tried OMF/AAF and all the imoprt options but with only limited success(ie vol automation is copied but not pan and stereo files are force split).
thanks for looking
Gareth

I had the same question awhile back and the answer I got .... of course in a round about way.... was no. Everyone was saying to bounce the file and then import that into the session. I mean that works but its not ideal. Its things like this that really split me on Pro Tools and Logic.

How to maintain data in table control

plz send a detail description of how to create table control and maintain data in that table control.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

How to stop apps from sending and receiving data?

Or does it even matter because I have cellular data turned off...

If you have cellular data turned off apps can still send and receive data via WiFi. But why do you have apps that send and receive data if you don't want them to send and receive data?

PO report with cost center, order and delivery date

Hi,
pls. I just need a report to display the next fields Account Assigment and Delivery Date.
I attempted with standard reports like ME2N, ME2K but it is impossible to display all the information in the same screen.
Thanks a lot for cooperation.
Regards.

HI,
Create a Infoset query or ask ababper
Tables EKKN, EKPO, EKKO
Regards,
Pardeep Mlaik

Pro's and Con's to using Copies of Standard Material Types

Hi
We are looking for the pro's and con's of using copies of standard SAP material types for my company. We are a consumer goods company and looking to see if there are drawbacks and benefits when it comes time to upgrade SAP. Also what industry standards are out there for when we change / add views to standard SAP material types.
Regards,
Josh

there are no real pros and cons - just philosophy
We're using the SAP given material types, even adjusted to our needs, already for many years from 3.1 to 6.3 release and had never any issue with hotpackages or ith release changes.
We are using as well many own material types created by copy of SAP material types.
the only issues I know are, that the users need some time to understand which type to use if the description appears twice.
(Remember, it is a personal setting if keys are shown in dropdown lists, and I know many user who do not display the keys)

Tracking and maintaining data about modifications done to Standard SAP code

Similar Messages

Maybe you are looking for