Tracking and printing my posts

Hello,
Is there a way to search for a specific message among the questions that we have posted on this community support ?
I would like to find a reply that I got some time ago, about a specific point and I can't find it in the many threads that I initiated...
Another question is about getting a print out of all my questions, or getting them in a single file for later easy recovery when I am not able to connect to communities during my trips ?
Is it possible to have them all in a folder or do I need to print them one by one ?
Thanks in advance, hope I am clear enough....
Ivan

Is there a way to search for a specific message among the questions that we have posted on this community support ? I would like to find a reply that I got some time ago, about a specific point and I can't find it in the many threads that I initiated…
The search is pretty limited. If you can't find the thread by looking in Your Stuff, you'll have to try and remember something relatively unique about that particular post and then search for it in the Advanced search, specifying your user name:
Is it possible to have them all in a folder or do I need to print them one by one ?
Unless you subscribed to all your threads so that you have email copies, you'll have to print the threads/posts one by one.
Regards.

Similar Messages

Pdf reader X has problems with small pdf and printer with post script driver

Hi friends.
I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
Can someone help me please.........are there settings in Reader X who can solve my problem ???
Thank you very much for help!

put ? after rwcgi60.exe

Printing of Post Dated Cheque through APP

Hi,
I have a requirement where i want post payment document and print the POST DATED CHEQUE according to the DUE DATE of the Invoice from F110.
E.g.: Invoice 1 is due on 21.01.2011 for Rs.20000/-
Invoice 2 is due on 23.01.2011 for Rs.30000/-
Then, APP program should post the payment document for 1st invoice on 21.01.2011 and the Post dated cheque should get printed with date 21.01.2011 while for 2nd invoice payment document should be posted on 23.01.2011 and the Post dated cheque should get printed with date 23.01.2011
Anybody can guide how to proceed for getting this post dated cheque with different dates printed from SAP.
Thanks in advance.

Hello Sheetal,
As per my knowledge, you don't need any specific confirguration for this,
Assuming to day is 20-1-2011, your F110 run date, and your "Net payment run date" is 24-1-2011, system will automatically post the payment document and create a post dated cheque for invoice due on 21 and 23rd. the only thing you need to keep in mind is the next payment run date should be 24th.
Satish

Stock tracking and stock posting

Hello,
In the Stock Management/stock transactions/Initial quantities, stock tracking and stock posting,
Suppose the following context:
Item stock: 1000
Counted: 900 (posted in stock tracking)
When reconciling in stock posting is raising this error:
"Item price has not been entered"
though we choosed Allow Inbound Posting without Price.
This is only happening when the counted quantity is smaller than the item stock, that is, in the example given everything is OK for counted quantities >= 1000.
SAPB1 Version 2007PL30
We have try in 2005PL45, and it worked. So, we suppose this could be a bug. The strange thing is that it worked in a previous version!
Do you know something about this behaviour?
Thank you for your help,
Regards,
Vanessa

Hi,
Please refer to notes:
1155329 Error: "item price has not been entered" in Stock Posting
1173589 SAP Overview Note for SAP Business One 2007 A PL 37
Hope this can be helpful
Best Regards
Helen Sun
SAP Business One Forums Team

How to track pages printed, file names

Can my printer track pages printed and file names?
HP Deskjet Ink Advantage 5525 e-All-in-One Printer
Thank you
EvEd

Sorry that can not be done. You will have to keep track manually.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Issues with connection and Printer

Hi guys,
I have two issues going on, but one of them is not related to security but I want to through out there to see if anybody can answer it or suggest me an appropriate thread.
First question:
Can anybody tell me how set up a printer in ECC 6.0, Please tell me step by step. Its related with iw32 and printing. Please explain over all I never setup printer through SAP.
My another question is more of a Basis question since I cant find a basis thread Im posting here,
The developer trying to connect to courion but some how the Courion connector did not work so we added sap_all, sap_new to the courion ID but it worked once and then its not working again.
I was wondering if anybody has any idea about this. Please give me some thought or recommendation. (Courion is some other software)
Thank you so much for any help in advance

Replacing your wireless router now try.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to print a post card om HP4640

Hi,
I am trying to print new years card with my HP4640 on 200g' A4 size paper, but the printer wouldn't reconize the paper.
Is the paper too big? or it's something i can solve by changing the settings?
Thank you,
Itamar

If the printer is not feeding any paper through and printing, try the steps in this guide:
'Out of Paper' Error Message and the Printer Does Not Pick Up or Feed Paper
If the troubleshooting does not help at all, and the printer will not feed paper still, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

File and Printer Sharing Problem with WRT54G

I am currently having problems sharing files over my network. My setup consists of:
3 laptops (wireless)
1 desktop (wired)
WRT54G V6.0 router with firmware version 1.00.9.
All of the computers have File and Printer Sharing enabled, unique names, and are on the same workgroup. However none of the computers can see one another. When I try to view workgroup computers for my network places, the explorer window stops responding for about 30 sec. and then spits out a dialog with the error:
"Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I think that this problem has something to do with the router, as I have been successfuly sharing files and a printer with these settings using a microsoft 802.11b router for over a year. After purchasing the linksys and swapping it out with my old router, filesharing no longer functions.
I have spent a little time browsing the forums and have seen other posts from people with simmiler problems, but was unable to find any solutions.
Any help would be much appreciated.
Thanks.

I'm having the same problems as you are, I have 2 computers on wired the other wireless the router is in between and I can't access from either side, although I can ping and remote connect but just cannot share files across the network. I have looked all over the forums too and there saying to ditch linksys and do something else.
Its not you thats caused this it is the firmware and the router that have the problems.
My Specs:
WRT-54G
v5.0
That new firmware update 1.00.9 just isn't working right. I might downgrade my fireware to fix this problem.
Message Edited by justin2006 on 09-26-200612:24 PM

Preview and Print Form before submitting

I have created a form. The client would like the person who
just filled it out to be able to preview and print it prior to
submitting or even after submitting. Would this be part of the form
mail script? Does anyone know the PHP scripting code?
Thanks!

Form page submits to a preview page that parses the form
variables from the
POST array, places them on the page, AND loads hidden form
fields with the
corresponding data. The client may print this page using FILE
| Print. To
accept the data shown there, the client would click on an OK
button that
submits the form's hidden fields to the PHP processing
script.
To make this happen you would have to know how to a) parse
the data from the
$_POST array on the confirmation page and display it on the
page, and b)
load the hidden fields for ultimate submit to the PHP
processing script.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RichyZee" <[email protected]> wrote in
message
news:gd4vpt$63v$[email protected]..
>I have created a form. The client would like the person
who just filled it
>out
> to be able to preview and print it prior to submitting
or even after
> submitting. Would this be part of the form mail script?
Does anyone know
> the
> PHP scripting code? Thanks!
>

How do I print all the open tabs in Photoshop, without clicking on each and printing manually?

How do I print all the open tabs in Photoshop, without clicking on each and printing manually?

If the song are part of an album, the album should have a cloud icon for downloading it in full. If they are separate tracks (not in the same album) you will have to download individually.

There are hidden pages in the PDF form I have. How can I see and print all without clicking on the

I have hidden pages in the PDF form I'm using (but didn't create). How can I see and print all the pages at once without clicking on the "next page" button. In the initial view, there are four pages, but if I click the "next page" button, there are a total of 12 pages in this document. This is three budget years, each year being 4 pages long.

You're most likely dealing with a dynamic XFA form created in LiveCycle Designer. You can open it, click the button, and save it, and it will most likely be 12 pages when next opened, but it depends on how the form is set up. The ability to make edits to an XFA form in Acrobat is very limited, especially for dynamic forms, so things like flattening aren't possible.
If it's not an XFA form, you'd still need to click the button at least once and save. To say for sure what's possible, I'd need to see the document. Can you post it somewhere?

Why has my hp deskjet 2050 printer and scanner suddenly slowed down and printing one line at a time

why has my hp deskjet 2050 printer and scanner suddenly slowed down and printing one line at a time

This is usually indicative of a defective print cartridge. Suspect the black is low in ink or defective. Please check all cartridges.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

D-link 524, appletalk and printing

hi!
i am trying unsuccessfully to print via wireless d-link router to my old laserjet...
my setup:
powerbook g4 12"
[linking via airport to:]
d-link524 wireless router
[ethernet connection from back of above router to:]
hp laser jet 2100tn
[which works fine via ethernet+appletalk]
when on wireless, i cannot see the printer in the printer setup utility, and i suspect, after doing some research here and reading other posts, that there may be an issue with appletalk not beng supported by a non-apple wireless unit? is that why i can't see the printer?
if so, is there a work around? i have been thinking of experimenting with going back to my old non-wireless router, to which the printer would be connected, and then adding the wireless router simply as another ethernet device? not sure if this would work....
any thoughts or advice much appreciated
p.
PB12 Mac OS X (10.4.6)
PB12 Mac OS X (10.4.4)

OK Folks!
I've worked it out, after reading the following forum post:
http://discussions.apple.com/thread.jspa?messageID=729511&#729511
I first reassigned the IP address of the printer, using the d-link DI 524 static IP address configuration window in DHCP.
I then went to Printer Setup Utility and activated the new IP address of the printer under 'HP Jet Direct Socket'.
Bingo! The whole network, including my wireless connection can now see the printer in this mode with this new IP address.
P.

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

How do you improve the speed of processing and printing of PDF from CAD in indesign?

I work for an engineering consultancy company and for a long while I have suffered with using PDFs files generated from AutoCAD when placed within an InDesign report. There are three issues that arise:
The files take a long time to process when preparing the InDesign report. (This is mainly in high quality preview mode)
The files take a long time to export to PDF
(The most annoying one) The files take a long time to process and print when sent from the PDF to the colour laser printer. So much so, a single page from InDesign that contains a PDF generated from CAD can take up to 15 mins to print.
I have tried converting the PDFs to jpegs prior to insertion into the InDesign document, but the quality and colour is dramatically reduced thus them useless. Is there any pre processing on the PDFs generated from CAD that I can do to reduce the impact that it has within InDesign and in the post processing?
We also get missing font warnings that arise from the inserted PDFs from CAD that may or may not be an issue. Your advice here would also be appreciated.
I would be the first to admit that I am not the most advanced user of InDesign though I am sure that my workflow could be improved to alleviate the situation.
Your assistance would be appreciated!

Thanks for your quick response.
I have tried both options you have recommended, but unfortunately the file size doesn't seem to be the issue. Most of our CAD files (except for when they contain raster backgrounds) are around 0.5-2Mb which isn't massive compared to some jpegs. The PDF optimization process does make a small difference to the file size but only in the region of perhaps 5% reduction.
If it helps the most awkward file I am using at the moment has this audit result, pre-optimization. This is typical of the CAD files produced by AutoCAD. As you can see the content streams take up the highest percentage that doesn't reduce that much even when the optimizer has all options engaged.
What do you think?

Tracking and printing my posts

Similar Messages

Maybe you are looking for