Transaction Aborted Exceptions are seen when service downloading data

Hi,
We are getting two different types of exceptions while one service trying to download data from another service
There are two scenarios where we are getting these transaction exceptions that are seen when client's service downloads data from server's service.
1. The first kind of transaction exception is seen when service is trying to send the message to messaging queue in the InitialReceiveNext() method. The queue.send method throws this exception and the stack trace is as mentioned below:
04 Jun 2014 19:16:12,805 [BridgeExchanger] TRACE - Sending queue message 00000000-0000-0000-0000-000000000000\0 to queue private$\msgqueue
04 Jun 2014 19:16:12,806 [ClientBridgeEndpoint] ERROR - Error occurred during Receive!
System.Transactions.TransactionException: The operation is not valid for the state of the transaction. ---> System.TimeoutException: Transaction Timeout
— End of inner exception stack trace —
at System.Transactions.TransactionState.Promote(InternalTransaction tx)
at System.Transactions.Transaction.Promote()
at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction)
at System.Transactions.TransactionInterop.GetDtcTransaction(Transaction transaction)
at System.Messaging.MessageQueue.StaleSafeSendMessage(MQPROPS properties, IntPtr transaction)
at System.Messaging.MessageQueue.SendInternal(Object obj, MessageQueueTransaction internalTransaction, MessageQueueTransactionType transactionType)
at CI.Platform.Bus.Bridge.Client.BridgeExchanger.InitialReceiveNext(DownloadEndpoint endpoint)
at CI.Platform.Bus.Bridge.Client.BridgeExchanger.ReceiveNext()
at CI.Platform.Bus.Bridge.Client.ClientBridgeEndpoint.Exchange(Object state)
2. The second kind of exception is seen at the transaction.complete statement in the InitialReceiveNext() method. The stack trace is as shown below:
04 Jun 2014 23:15:59,152 [BridgeExchanger] DEBUG - Skipping the download message as the message is already downloaded..No new message is added to queue private$\msgqueue
04 Jun 2014 23:15:59,153 [ClientBridgeEndpoint] ERROR - Error occurred during Receive!
System.Transactions.TransactionAbortedException: The transaction has aborted. ---> System.TimeoutException: Transaction Timeout
— End of inner exception stack trace —
at System.Transactions.TransactionStateAborted.BeginCommit(InternalTransaction tx, Boolean asyncCommit, AsyncCallback asyncCallback, Object asyncState)
at System.Transactions.CommittableTransaction.Commit()
at System.Transactions.TransactionScope.InternalDispose()
at System.Transactions.TransactionScope.Dispose()
at CI.Platform.Bus.Bridge.Client.BridgeExchanger.InitialReceiveNext(DownloadEndpoint endpoint)
at CI.Platform.Bus.Bridge.Client.BridgeExchanger.ReceiveNext()
at CI.Platform.Bus.Bridge.Client.ClientBridgeEndpoint.Exchange(Object state)
If anybody has any insight please reply.
Thanks in advance!!!

Hello,
Your two questions are both related to MSMQ forum. Please post threads on that forum for more effective response. Please refer to
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=msmq. Thank you for understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • What are the ways to download data from ods?

    Hi all,
    what are the ways to download data from ods?
      1. se11/se12
      2. listcube
      3. infospokes.
    Apart from the above 3 is there any other way to download data from my ods.
    I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
    Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
    thanxs
    haritha

    Hi Haritha,
    Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
    Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
    Now you should see and Excel Icon on top, click on it then select Table , then
    Microsoft Excel and it will open your data with all columns you want.
    I just tried for 213 columns
    Hope this helps.
    Thanks
    CK

  • PICTURES ARE ROTATED WHEN i DOWNLOAD THEM TO MY pc

    This just started happening.  When I download pictures from my Iphone 5 to my Dell PC desktop, the pictures are all rotated 90 degrees.  This never happened in the past.  How do I fix this?

    If this happens on Windows systems it is because the Windows Photo Viewer and Live Photo Gallery may ignore the EXIF orientation of the photos. This data tells the viewer which way is up.
    This is a Windows problem NOT an Apple problem. See here for discussion and details from Microsoft on how this may be fixed on Windows:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/windows-phot o-viewer-or-live-photo-gallery-does/a161c8da-c1ce-4347-a92e-724f9e535c15
    You can also avoid this problem by taking photos in landscape mode with the iPhone/iPad held with the Home button to the right. In portrait mode keep the Home button down.

  • My backward and forward arrows are missing when I download Firefox 4.0

    My brother was at my home this past weekend and he downloaded Firefox 4.0 to his Windows Vista laptop and the download worked perfectly. When he downloaded Firefox 4.0 to my Windows Vista desktop, the download is missing the backward and forward arrows are missing and I find it very difficult to use the Firefox application. My brother removed the program and redownloaded the program at least 4 more times and every time the program downloaded with no backward or forward arrows. Both applications were downloaded from the same Firefox 4.0 website. How can this happen and what can be done to correct it?

    Try to reset the toolbar customization, see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • In VA02 transaction which exit is triggering when saving the data

    hi all sap gurus,
    In VA02 transaction which exit is triggering when saving the data

    Hi Reddy,
    The <b>user exit</b> and badi tried for this transactions are
    V60F0001                SD Billing plan (customer enhancement) diff. to billing plan
    V46H0001     SD Customer functions for resource-related billing
    V45W0001     SD Service Management: Forward Contract Data to Item
    V45S0004     Effectivity type in sales order
    V45S0003     MRP-relevance for incomplete configuration
    V45S0001     Update sales document from configuration
    V45P0001     SD customer function for cross-company code sales
    V45L0001     SD component supplier processing (customer enhancements)
    V45E0002     Data transfer in procurement elements (PRreq., assembly)
    V45E0001     Update the purchase order from the sales order
    V45A0004     Copy packing proposal
    V45A0003     Collector for customer function modulpool MV45A
    V45A0002     Predefine sold-to party in sales document
    V45A0001     Determine alternative materials for product selection
    SDTRM001     Reschedule schedule lines without a new ATP check
    <b>Business Add-in</b>     
    BADI_SD_SCH_GETWAGFZ     Scheduling Agreement: Read WAGFZ from S073
    BADI_SD_V46H0001     SD Customer functions for resource-related billing
    <b>Reward pts if found usefull :)</b>
    Regards
    Sathish

  • The sound of podcasts are distorted when I download them to my ipod touch.  How do I fix/ prevent this?

    The sound is fine on my computer, but when I sync them with my ipod they are distorted.  Why?  How do I fix this?

    Have you tried a hard reset of the iPod yet to see if that helps?
    What about a restore? 
    B-rock

  • HT1689 How do I change my security questions that are asked when I download something on iTunes

    When I try to download something off of iTunes it asks me for security questions but I forgot them. How do I change them?

    Click here for information. If you can't get the answers emailed to you for some reason, contact the iTunes Store staff via the link in that article.
    (75511)

  • Some German alphabets are replaced by # while downloading data from UNIX

    Hi,
    I have a problem when I upload the data into UNIX application server directory, the data for example the data sent to server had some characters with german alphabets 'ä'
    '2 Jahre Erw. Gewährl.-Level HW-Rep.(11L) '.
    When I try to download the data from UNIX to a .txt file, those alphabets are replaced with '#'. The above characters has a german alphabet 'ä' which was getting replaced with '#'. So the data in the downloaded file from UNIX to a txt file would appear
    '2 Jahre Erw. Gew#hrl.-Level HW-Rep.(11L) '
    I tried to rectify the OPEN DATSET statement with the statement below
    OPEN DATASET L_UNIXFILE FOR OUTPUT IN LEGACY TEXT MODE CODE PAGE '1100'
    IGNORING CONVERSION ERRORS REPLACEMENT CHARACTER ''.
    Even after incorporating the above code in my program didn't help.
    Can any one suggest me solution.
    Regards,
    Rajesh Bhogi

    Check the codepages. If characters are replaced by '#' there is no corresponding character in the target codepage.

  • Do I use bytes when I download music

    How many bytes are used when you download music from the clouds

    Welcome to the Apple community.
    That varies significantly from tune to tune, depending up on its complexity and  more so from its length. As a very rough guide, an average tune may use 6 to 8 MB.

  • Uploading Data vs Downloading Data

    When using skype are you uploading or downloading data? in addition, Which its being used more MAINLY? The Uploading? or the Downloading?

    GIVE SPACE IN THE HAS FIELD SEPERATOR......
    I HAVE TRIED THIS AND I GOT THE OUTPUT
    DATA: BEGIN OF ITAB OCCURS 1,
    BRANCH(1) TYPE C,
    XRE_TTY(18) TYPE C,
    ORIG_CURR(3) TYPE C,
    COB(3) TYPE C,
    TTY_TYPE(1) TYPE C,
    END OF ITAB.
    DATA: WA_ITAB LIKE ITAB.
    DATA: V_FILENAME TYPE STRING.
    V_FILENAME = 'C:\ACCUPLOAD\input.TXT'.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    FILENAME = V_FILENAME
    FILETYPE = 'ASC'
    HAS_FIELD_SEPARATOR = ' '
    HEADER_LENGTH = 0
    READ_BY_LINE = 'X'
    DAT_MODE = 'X'
    IMPORTING
    FILELENGTH =
    HEADER =
    TABLES
    DATA_TAB = ITAB.
    EXCEPTIONS .
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    LOOP AT ITAB .
    WRITE:/20 ITAB-BRANCH,
    ITAB-XRE_TTY,
    ITAB-ORIG_CURR,
    ITAB-COB,
    ITAB-TTY_TYPE.
    REWARD POINTS IF HELPFUL .......

  • Download data from interactive report

    Hi all. I'm on apex 3.1.1.00.09.
    I have this problem: when I download data from interactive report I can download only in CSV and PDF. If I try to download into pdf it creates a file of only 1 KB.
    I would know if I must configure my apex in order to download correctly in pdf and if I must configure it in order to download in doc and xls format.
    Thanks all for collaboration,
    Fabrizio

    Thank you for your reply.
    I am able to download the csv file, but my problem is: I don't want the column headings to show.
    Is it possible to download only the data, not the column headings?

  • How to download data into  two different columns 2003 excel format in ole

    Hi ALL
    when we download data into excel using ole with delimiter it works fine in 2007 but when we check this with 2003 format
    both fields come in only one column .Can any one suggest  
      CONCATENATE WA_ALL-PERNR LV_ICNUM INTO WA_PERNR SEPARATED BY W_DELI   IN CHARACTER MODE.

    If you're already using OLE, you can fill in value for each cell separately instead of using a delimiter. Something like this fragment:
    FORM fill_cell USING p_row p_col p_value.
      CALL METHOD OF obj_excel 'CELLS' = obj_cell
        EXPORTING
        #1 = p_row
        #2 = p_col.
      SET PROPERTY OF obj_cell 'VALUE' = p_value.
    ENDFORM.                    "fill_cell

  • I have reinstalled itunes after it did not start when I downloaded the new software.  I am now  getting a message that says "Service (Apple Mobile Device) failed to start verify that you have sufficient priviledges to start system services.  What do I do

    I have reinstalled i-tunes after getting error messsages when I downloaded the new software.  Nor I get a message that says" Serice (Apple Mobile Device) failed to start. Verify that you have sufficient priveledges to start system services.  What do I do now

    Hi annibu757,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • Duplicate 'invisible' photos are being created when I download from camera

    Hi all,
    Recently spotted a weird thing happening when I download images from my Nikon D200. I use Image Capture, but not sure if that's the problem. Hopefully you guys can help.
    Basically, when burning a DVD of images for a friend, I noticed that if I dragged over the folder that contained the downloaded images, a new disc was created in Toast, and the disc size matched the size of the folder as seen in the Finder. However, if I created a blank disc and just copied over the folder contents themselves, not the actual folder, the disc size was 1.5GB smaller.
    So, I fired up TinkerTool and turned on Invisible Files in the Finder, and was shocked to discover that throughout my hard drive, in the folders I download photos into from my camera there are duplicate invisible 'photos' with a period at the start of their name (rendering them invisible) that are the size of a full high res photo each - essentially doubling the size of the folder. If I delete a photo in the Finder, it's invisible counterpart doesn't get deleted with it - so what the heck are they? They're taking up GB upon GB upon GB of space on my drive and I can't even see them unless I use TinkerTool.

    I am not a software engineer, but I doubt if these are left over temp files.
    More than likely, capture keeps both - the original and the colour managed files. Why hidden, no idea. Maybe it's the camera telling it to do so, maybe some software can "see" both depending on the colour profile selected. Maybe, indeed it's a bug in the software. The best way to find out is to send a bug report and Apple will answer.
    If you are using the Spyder you should not colour manage the images at all.
    the only profile you should use it the Spyder one.
    Colour profile is basically a "translator" of RGB colour values, which displays (and prints) the images with a specific "colour shift".
    Each time you acquire an image there is an error built in into the image (no device is perfect), then when displayed on a screen, this screen will introduce another colour shift, then the printer will shift the colours again, and you may end up with wrong colours in the output; and that's where the calibration and colour profiling comes in.
    Spyder will scan your screen and adjust it so that the colours are as true as possible. If will not fix any of the camera problems, but at least on a screen you get exactly the colours that the camera took.
    (Calibrating a camera is normally not needed, but it can be done too.)
    Now, if your screen in Spyder'ed (?) then any software you use to edit the shots in should be set to use the Spyder colour profile, otherwise, you'll not see the true representation of your colours.
    When it comes to printing... don't even get me started Most commercial printing joints will supply you with their machine's profile, for home printers - trawl the Internet for the profiles or spend A LOT of money on print calibration.
    I did check and I have no hidden files, I do not ask Capture to colour manage my shots.
    I also never shoot JPEGs, RAW only. Later if I know I don't want an image for editing, but want to keep it, I dump it to a JPG and delete the RAW.
    A silly question here, why not use the Nikon's provided software to download the pix?
    Hope that helps a little.
    You can check my recent work here:
    http://www.redbubble.com/people/braincandy
    cheers

Maybe you are looking for

  • How do I access my hard drive connected to airport extreme?

    I've already imported video to my hard drive. I had it previously connected via firewire. It's there in an imovie 08. However, when I open up imovie in the "Event Library" panel, my hard drive has a yellow triangle with an exclamation point on it. Do

  • PR to open in Scheduling Agreement

    I have created the SA and in this various Purchase Req. are attached but now i want to close the SA and want to make the PR to open as for some case the material is prcorred but for some cases partiol i want to make the partial PR to open so that my

  • How to create dots on a circle?

    I need help please. Could someone kindly tell me how I can create dots to fit around a circle or wavy line using the blend tool and spine. However I want the dots to go from say 50mm in diam to 25mm at the middle one and then back up to 50 again? Any

  • Dropping air port disks

    Just this week, our AEXn has started dropping the USB hard drive connected to it any time a computer tries to access the drive. This is a major headache as all our music is on the drive and any time we attempt to sync an iPod it drops the disks. Just

  • Hangs forever @ Contact / Calendar Sync

    Hello.. I have a MBP 13" running Snow Leopard and iTunes 9 and an iPod nano 3rd gen. All are the latest versions of software. Now I've tried 'restoring' the iPod nano, but no difference -- after syncing music and playlists, iTunes continues trying to