Transaction for this user exit

Hi
how can i find out to which transaction user exit SDVAX001 belongs?

Hi Tushar,
SDVAX001 is a Enhancement not a program , you can see this in SMOD , it will be having comoponents which is again having the supported Exits like Function Module Exits, Screen Exits, Menu Exits.. But this SDVAX001 Enhancement is having a Function Module Exit EXIT_SAPMV45A_001 which will be used to determine the billing plan type . In side this Function Module you can see a include named ZXVVAU01 , this one will be created by us by double clicking on it. In this We will using data of VBAK,VBAP,VBKD,TVAK,TVAP to manipulate the FPART .
Hope This Info Helps YOU.
Regards,
Raghav

Similar Messages

Coming back to the Transaction from a User Exit

Hi,
I perform some checks in a User-Exit before saving a transaction & throw an error message if something is not proper. But, the transaction terminates after that. I need to give the user an option to make changes in the transaction. eg, if user exit checks if a certain field should not be empty, the user should have an option to enter the field after the user exit throws the message. How can i go back to the same screen from the exit to achieve the same.
Thanks in advance.
Bikash
This was for a general scenario wherein after an error message triggered by an Exit is displayed, the transaction just terminates.
Message was edited by: Bikash Agarwal

Hi,
If you give error message, it will leave the current transaction.
Instead try using some POPUP function module, which will have options 'OK' and 'CANCEL'.
If user presses 'OK', then allow user to do modifications and if he presses 'CANCEL', then write LEAVE PROGRAM to come out of transaction.
Hope it helps.
Regards,
Shashank

How to find the structure in this user exit

My requirement is add new field to Delivery due list ALV report(VL10G).For enhance this report i will append one field(LIKP-SDABW) in this structure SHP_VL10_ITEM.This structure is not showing in the include LV50R_VIEWG05
USEREXIT_PREPARE_LAYOUT_FILL .Where i have to find this structure,and internal tables?
Please help me.
Thanks & Regards,
sairam

Hi Sairam,
Goto the program for transaction VL10G.In that u make a seach for the user-exit
USEREXIT_PREPARE_LAYOUT_FILL.Then write the logic inside tht.U will need an access key for that.
Reward points if it solves ur query or answer is helpful
Thanks
Chinmay

As01 transaction using substitution user exit populate classificaion

Hi all,
I have a requirement, where in using the substitution user exit rule U210, I need to populate fields ANLB-NDPER, ANLB-NDJAR and ALNA-VMGLI from the values maintained in Ztable.
I am able to overwrite the SAP standard values for the fields ANLB-NDPER and ANLB-NDJAR. But not able to populate the filed VMGLI(Classification key).
For some asset classes, the classification key is not mandatory and the user without giving the value in that field if save the transaction, then I need to populate the value of VMGLI with the ztable value.
The present rule U210 is not working for classification key.
Please suggest, is there any other user exit for the scenario where we can populate VBGLI field.
regards
Rajani Yeluri

In the user exit documentation, it doesn't say anything about this exit being used for validation, therefore, it probably shouldn't be used as a validation routine, especially if its not being trigger at every PAI.
FU EXIT_SAPLAISA_001
Short text
Assign Inventory Number
Functionality
Using this user exit, it is possible to assign an inventory number when you create a new asset master record.
Notes
In the user exit, it is absolutely forbidden to use a statement that leads to an update or removal of database changes. Examples of such statements are:
'Commit Work' , 'Rollback Work' or call of function module 'DB_COMMIT'.
Parameter
I_ANLA
E_INVNR
Exceptions
Function group
XAIS
Regards,
Rich Heilman

How this user exit MWMRF102 triggered in tcode LM05

how this user exit MWMRF102 triggered in tcode LM05. could somebody help for this procedure
thanks in advance
rakesh

Hi Sairam,
Goto the program for transaction VL10G.In that u make a seach for the user-exit
USEREXIT_PREPARE_LAYOUT_FILL.Then write the logic inside tht.U will need an access key for that.
Reward points if it solves ur query or answer is helpful
Thanks
Chinmay

Configuration for writing user exits

sir provide me the configuration of user exits,purpose how to write it
thank u

Hi Supraja,
User exits are the enhancements provided by SAP
you can use them in transactions. Each transaction will have user exits.
If you want to use your own requirements by making your coding while the transaction is run you can use user exits.
For example if you want to run the MRP in MD02 specific to MRP controller you can user exit.
Please also refer the document below.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it. These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
All Userexits start with the word USEREXIT_...
FORM USEREXIT_..
z..
ENDFORM.
The problem lies in finding the correct userexit and how to find it if one exists for the purpose. Once the correct userexit is found the necessary customer code is inserted in the customer include starting with the z. in the form routine.
e.g. USEREXIT_SAVE_DOCUMENT_PREPARE
Certain application like SD still provide this form of enhancement using userexit but this practice is no longer being followed for newer extensions instead they are using EXITs which come bundled in enhancement packages . Nevertheless existing USEREXITS will be supported by SAP an all the newer versions of SAP.
HOW TO FIND USEREXITS
Userexits can be found in number of ways:
1) To find userexits in SD module , goto object navigator(SE80) and select
development class from the list and enter VMOD in it. All of the userexits in SD are contained in the development class VMOD. Press enter and you will find all the includes which contain userexits in SD for different functions like PRICING, ORDER PROCESSING etc. Select the userexit according to the requirement and read the comment inserted in it and start coding.
Some examples of userexits in SD (SALES & DISTRIBUTION) are:
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure. This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields. The fields which are not in either of the two tables KOMK and KOMP cannot be used in pricing .Sometimes a need arises when the pricing is to be based on some other criteria which is not present in the form of fields in either of the two tables. This problem can be solved by using USEREXITS which are provided for pricing in SD. Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done. Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP program SAPMV45A. The name of the userexits are same. i.e.
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newly created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose includes are provided in each of them .
To create the field in header data (KOMK) the include provided is KOMKAZ
and to create the field in item data (KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Freight to be based upon transportation zone, for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2) The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3) The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located, this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved. This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Exits & Enhancements
There are mainly six types of EXITs in sap which have been collected in the form of enhancement packages and attached to standard code in SAP.
These are different from USEREXIT in the way that they are implemented
in the form of FUNCTIONs while in USEREXITS we use form routines for their implementation. These are also sometimes known as function exits.
These start from the word EXIT_ followed by the program name and then followed by a three digit number.
e.g. EXIT_SAPMV45A_002
This exit is found in SD in enhancement V45A0002.
TYPES OF EXITS
1) MENU EXITS
2) FUNCTION EXITS
3) TABLE EXITS
4) SCREEN EXITS
5) KEYWORD EXITS
6) FIELD EXITS
We use SAP transactions CMOD and SMOD to manage exits. Before implementing an exit, it is required to create the project by using CMOD
selecting the enhancement e.g. V45A0002 and selecting the component
(one which fulfills our need) i.e. the exit which will be implemented in SMOD and after coding has been done the project has to be activated.
An exit can be coded only once.
FUNCTION EXITS
These are used to add functionality through ABAP code. These start from the word EXIT_programname_NNN ending in a 3 digit number. No access code is required to implement any type of exit including function exits.
The function exits are called from the standard SAP program in the form
of ABAP statement
CALL CUSTOMER-FUNCTION 'NNN'
This is in contrast to USEREXITs where PERFORM statement is used to call
the required userexit.
To implement the FUNCTION EXITs first of all the project is created and a suitable enhancement package is selected and from its components the function exit to be implemented is selected and on double clicking it the exit code will appear in ABAP EDITOR(se38) where a Z include will be found and the customer code should be entered in this include.
e.g.
ADDING A DEFAULT SOLD-TO-PARTY in Sales Order Creation
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components. In the components you will see the exit EXIT_SAPMV45A_002. This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This
function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e. if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04. This include will be used to write our custom code.
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object, select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created, sold-to-party field will come up with a predefined customer.
FIELD EXITS
The field exits are managed, created, activated through program RSMODPRF. The field exit is associated with a data element existing in ABAP dictionary and hence to the screen field using that data element.
The format of field exit is:
FIELD_EXIT_dataelement_A-Z or 0-9
If a particular screen and program name is not specified than the field exit will effect all the screens containing that data element.
The function module associated with field exit shows two parameters
INPUT and OUTPUT. Input parameter contains the data passed to the field exit when the field exit was invoked by the R/3, we can write our own code to change the output parameter depending upon our requirements.
Before the field exit can have any effect the system profile parameter
ABAP/FIELDEXIT in all the application servers should be set to YES
ABAP/FIELDEXIT = YES.
TYPES OF USER EXITS
User exits are basically 4 types,
1. Field exit,
2. Menu Exit,
3. Function module and
4. Screen exit.
These exits we can use according to a situation...
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What is the name of the table for finding user exit !

What is the table name to find the user exit !

Hi,
Goto to the table tstc and enter the transaction code for
which u want to find out the User-Exits. Check out the
program name from the result. Goto SE38 and dee that
program in display mode. Then search for the string Call
Cutomer-Funtion. All the result of search are the user
exits defined there for that transaction.
SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
cheers,
vasavi.
kindly reward if helpful.

EXP-00105: parameter CONSISTENT is not supported for this user

Hi,
I have use Oracle 10g on unix platform
i have export is taken from following command
exp \'/ as sysdba\' file=t.dmp full=y buffer=10485760 log=0101.log CONSISTENT=y statistics=none
export is sucessfull but one warning
EXP-00105: parameter CONSISTENT is not supported for this user
if i have use without CONSISTENT parameter then export is successfull ,
why EXP-00105 error occured ?

As per Oracle Error Notes:
EXP-00105: parameter string is not supported for this user
Cause: The user attempted to specify either CONSISTENT or OBJECT_CONSISTENT when connected as sysdba.
Action: If a consistent export is needed, then connect as another user.
Looks likE the SYS user cannot do a transaction level consistent read (read-only transaction). You could have performed this by SYSTEM user or any DBA priviliged user to to take the complete export of your DB.
Anyway, for more information the error "EXP-00105", please take a look into the same question on another Oracle related forums.
http://www.freelists.org/archives/oracle-l/05-2006/msg00236.html
Regards,
Sabdar Syed.

Find The Transaction for the given EXIT Name

Hi Friends,
This is my doubt,pls dont think in the other sense
I know how to find the EXIT for a given Transaction. My question is that IS THERE IS ANY WAY TO FIND THE TRANSACTION FOR A GIVEN EXIT NAME.Could any one help me out on this.My fuctional guys are giving me the EXIT names and asking me to find for which transaction the exit triggers.
Thanks & Regards
Vijaya Lakshmi

hi lakshmi,
try the following steps.
1. give the exit name in SMOD.(J45A0007) go to display mode
2. click component and take the exit name.(EXIT_SAPMJ45A_009)
3. here SAPMJ45A is the progam name, so that in SE38 give the progame name click the Where used button and select the transaction and deselect other checkbox.
4. you will get the transaction code.
Reward if found helpful.
Regards,
Boobalan Suburaj

Lock Transaction for Specifi Users

Dear All,
Good Day,
We are planning to lock the transaction for specific user who doesnot use the transaction more than 3 months.
Please suggest me what will be the procedure.
Thanks in advance,.
Best Regards,
Suresh Kumar K

Hi Suresh,
Your idea of restricting users in using t-code is good practice. But as of now there is nothing like you can restrict user by locking t-code only for tht user/users alone.
1. You can lock the T-code but this will affect entire system.
2, You can remove t-code from the role, but this affect other user and if you wanted to make another role for only this user it will start getting to be tedious job, since you have to delete some roles create some other and alos user may use some t-code once every quarter for some of quarter end results and you have to seperate these t-code from others which was not possible, this will not workout so easily.
The only option could be probably if user doesnot login for more than 3months just lock him.
Regards...

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

ACL is not enabled for this user OSX 10.5

I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

Hi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris

Unable to create the portable home directory for this user

This is driving me nuts!
I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
What am I doing wrong?

I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

Thousands of "mail is not enabled for this user"

Someone is sending my domain email to thousands of non existent mail accounts. It's like they are combining every possible prefix to my domain they know of. It's been going on for weeks. The Mail service, however, is not being brought down by this at all. So I don't know what kind of attack this is or how to stop it.
Can someone help me? Below is a minute section of my System log:
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
------------------

Two possibilities - both fall under the heading 'reconaissance by e-mail'. A spammer or hacker will try 1000's of common names, then look at which ones didn't bounce to determine which ones have accounts on your system.
They then have a comprehensive list of account names on your server, and can proceed to attempt likely passwords for each, or send endless spam to your users. Either one is a Bad Thing, doubly so if you've got any accounts that you created just to test things, and have weak passwords, but you've always counted on nobody knowing they exist.
At one point, I actually had a 'testuser' account that had 'testuser' as the password - I just hadn't remembered to delete it after I was done testing. It's very common for a system to have a couple of these hanging around. I didn't have trouble with it, but looking for and getting rid of these is critical.
Either way, the immdiate solution is to go Server Admin->Mail->Settings->Relay, and add the IP address(es) of the senders to the 'Refuse all messages from these hosts or networks' section. Mail attempts will still show up in your SMTP log, but they'll look like this one I got this morning (one of dozens):
Jan 3 11:07:33 miniserver postfix/smtpd[1440]: NOQUEUE: reject: RCPT from unknown[66.180.115.17]: 554 <unknown[66.180.115.17]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<xptwfs.gov>
Next is to take a look at your password policies - if you've got strong password policies (must include characters and numbers, must be 7 characters or longer, etc., you're probably OK, but if anyone has weak passwords, or god forbid, uses their userid as their password, you're pretty vulnerable.
It's also worth noting that someone with a full list of your users has a fair number of tools for improved odds of phishing, or spear-phishing, where they create finely targeted mails that say things like 'Bob Smith told me to contact you for your password', and look very real. A warning mail to your users to remind them that they need to keep passwords secret, and be cautious about mail, even if it appears to know something about them, would be good. I wouldn't specify that you've been recon'd, just a general 'New Year Security Reminder' or some such.
Hope this helps!

Transaction for this user exit

Similar Messages

Maybe you are looking for