Transaction Launcher - transport handler clas

Dear experts,
I've create an Z-transaction and want to start this in CRM WEB Ui. I've used the transaction launcher wizzard, and in the development system it works perfect.
But after the transport to the productive system the link does not work.
Is there an other way as to create the starttransaction in the productiv system again?
Thanks for help
Matthias

Hello Matthias,
Do you have your problem solved? We detect the same symptoms, can you kindly share the solution if so?
Thank you,
Andy

Similar Messages

Invoking Transaction Launcher in Event Handler

Hi,
My requirement is to invoke transaction launcher on click of a button. I am invoking transaction launcher using the following code in my event handler.
DATA : lr_navigation TYPE REF TO if_crm_ui_navigation_service,
lr_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
CHECK lr_navigation IS BOUND.
lr_navigation->navigate( iv_link_id = 'LOGICAL_LINK_ID' ).
Now, the transaction launcher is invoked with click of a button. However, this requires me to assign logical link to navigation bar profile and make it visible to the business role I am using. Meaning that, this logical link will appear on the navigation bar which I dont want. If I make this invisible for the business role, then the above code does not work.
Is there any solution for this ?
Regards

Hi,
If you are trying to launch an URL based Transaction using Tx launcher on button click. This code will help. You can write it in the Event handler of the button.
DATA: lr_data_collection   TYPE REF TO if_bol_bo_col,
        lr_ltx_val_node      TYPE REF TO cl_bsp_wd_value_node,
        lr_ltx_data          TYPE REF TO crmt_ic_ltx_id_desc.
    CREATE DATA lr_ltx_data.
    CREATE OBJECT lr_ltx_val_node
      EXPORTING
        iv_data_ref = lr_ltx_data.
    CREATE OBJECT lr_data_collection
        TYPE
          cl_crm_bol_bo_col.
    lr_data_collection->add( lr_ltx_val_node ).
    lr_ltx_val_node->if_bol_bo_property_access~set_property(
              EXPORTING
                  iv_attr_name = 'LTX_ID'
                  iv_value = 'xxxx' ).
    lr_ltx_val_node->if_bol_bo_property_access~set_property(
              EXPORTING
                  iv_attr_name = 'DESCRIPTION'
                  iv_value = 'xxxxxx' ).
    me->view_manager->navigate( source_rep_view = me->rep_view
                            data_collection = lr_data_collection
                            outbound_plug   = 'xxx' ).
Before that you need to create a component usage of component UICMP_LTX and create a navigation link to be used to pass to the outbound plug.
Regards,
Masood Imrani S.

Transaction Launcher in ICWC with Handler Class

Hi All,
I am in the process of creating new Transaction through Transaction Launcher (Wizard) in IC WebClient.
I wish to know more about the creation of Transaction Launcher Handler class (With super class) and SICF - Services.
Please help me to create a new CRM/ISU Transaction through IC WebClient.
Thanks and Regards
Nalinakumar
[email protected]

Hello Nalinakumar,
You need to define Transaction Launcher Logical systems and URL's in
IC->ICWebclient>Administration->System Parameters->Define Transaction Launcher Logical systems and URL.
You need to configure activities
CRM->IC Webclient->BasicFunctions-->Transaction Launcher->Define URL's and Parameters.
Configure Transaction Launcher.
regards,
Muralidhar Prasad Chatna

Error in transaction Launcher handler class

Hello friends,
I am following the step from the CookBook for the creation of the Transaction Launcher
but in side the class method
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
it is showing the error
CREATE_ENTITY is unknown or Protected or Private.
Its supper class is CL_CRM_IC_ABOX_ABSTRACT_BOR
and interface included is IF_CRM_IC_ACTION_HANDLER.
Will i have to make any change in side these class or there any other way to configure the transaction launcher.
Regards
Pulkit Agrawal

Hi Sudeep,
Thanks for the reply.
I am not sure about the EEWB extensions.
Initially I created a launch transaction using BOR method the path of the ECC logical system is given as below.
http://ssever:port/sap/bc/gui/sap/its/CRM_CIC_RABOX
But now I've changed the path as: http://ssever:port/sap/bc/gui/sap/its/CCMP_RABOX
and it is working now. I am able to pull the transaction from ECC although some other data flow issues are there.
So looks like there is some issue with the serivce CRM_CIC_RABOX in our system.
Thanks to all,
Nag

Transaction launcher in CRM Web IC

Hi,
We are trying to use transaction launcher in the WEB IC to call an R3 transaction. We have successfully managed in DEV and now we want to move across to QA for transport. But the handler class and config is done for DEV so far. In order to work this in QA, should we create/define the R3 QA system as logical system + RFC in our CRM Dev box and then transport ? Will it be required to be done for Prod as well then from dev? is there any other recommended way of doing this.
Regards,
Vin

Transaction Launcher handler class user mapped logical system to connect to R/3 environment.
I dont think you can transport Logical System,RFC Connections from Dev to QA or QA to Prod.
So before you start testing on QA,make sure that logical system for R/3 is already defined and RFC Connection is established.All you need to do is make sure that mapped logical system is created with the same name you have in DEV.To define the mapped logical system follow the path
Easy Access->Interaction Center->Interaction Center WebClient->Administration->System Parameters->Defined Tx Launcher Log Sys and URL's.This is the easy way without changing your code in Handler Class.
If you have already established a mapped logical system and you dont want to create another then you can do some code change in the below mentioned handler class methods
1. CONSTRUCTOR.
** In the Constructor methos replace the OWNLOGSYS with
** the available mapped logical system in your QA env
property-name =
cl_crm_ic_abox_constants=>mapped_logsys.
property-value = 'OWNLOGSYS'. "#EC NOTEXT
append property to gt_properties.
2. CLASS_CONSTRUCTOR .
** In the Constructor methos replace the OWNLOGSYS with
** the available mapped logical system in your QA env
gv_mappedlogsys =
    'OWNLOGSYS'. "#EC NOTEXT
3.GET_ACTION_DEFINITION .
** In the Constructor methos replace the OWNLOGSYS with
**the available mapped logical system in your QA env
   concatenate cl_crm_ic_abox_constants=>bor_action
              'BUS1006005' "#EC NO_TEXT
              'EDIT' "#EC NO_TEXT
              'OWNLOGSYS' "#EC NO_TEXT
         into rv_result.
The same applicable for QA to Prod too.
Hope this helps.
Thirumala.

Using the transaction launcher to call a BOR method to display a PDF

Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
In CRM 4, in the collection factsheet assignment block, the link was coded into an XSLT which is then displayed in the GUI and you would have a clickable link for a pdf file in a row in a table. That link would be as follows:
         <xsl:variable name="ev_key">SAPEVENT:?OBJTYPE=<xsl:value-of select="attributes/OBJTYPE"/>&OBJKEY=<xsl:value-of select="@KEY"/>&LOGSYS=<xsl:value-of select="attributes/LOGSYS"/></xsl:variable>
             <a href="{$ev_key}"></a>
This will get the file in IXOS and display it, in CRM 4. In CRM 7, the link is an icon in every line of an assignment block.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block and have it open? If so, how? Transaction launcher, function modules (like ARCHIVOBJECT_DISPLAY) in the OPTA package? (the package for all IXOS related function modules..)
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system?? or sapevent:xxx?
3) Do we have to configure a transaction in the IMG to be launched with the attributes listed there? Do we have to link it to any classes/ objects?
4) Do we have to have the code to the logical link dynamically to call the right PDF for each table line? Is it right to put this code in my event handler?? Usually transaction launchers are just in the nav bar.....
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG for the transaction launcher, and have the attributes defined for my BOR object that I would call, and pass it different attributes (eg. objtype, objkey, logsys...) and then return the PDF and display it in the UI in a new browser window by itself. (There is a BOR method for my BOR object named 'display_pdf'!!!!)
What do you think would be the optimal solution here? Does my theory of calling a BOR object with a transaction launcher to display a PDF make ANY sense whatsoever???
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante
Edited by: Jonathan Laplante on Jul 2, 2011 4:50 AM

Hi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
   iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

Transaction Launcher: Logical System in Production System does not change

Hi,
I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
Thanks,
Rohan.

Thanks Piyush. Could you be a bit more specific? I followed these steps:
1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
I still am not able to change the logical system. However, I can do it if I change the class name.
While deleting the transaction launcher id, should I be deleting all dependencies?
Regards,
Rohan.

Transaction Launcher Logical Systems and URLs

Hi,
I'm facing a problem with Transaction Launcher.
I've done all the settings specified here: http://help.sap.com/saphelp_crm60/helpdata/en/46/231befc17b5872e10000000a11466f/frameset.htm
Under section "Define Transaction Launcher Logical Systems and URLs" I've specified the values for Quality System: the ECC system is MQAS200A
By the way, when I try to access an ERP Sales Order, the transaction CRM_TL_ERP_BUS2032_DISPLAY tries to access system MSVL200A (which is the Development ECC System).
I cannot change the Logical System within the Transaction Launcher Configuration (currently it is set to ERP), since the Transaction is standard.
Does anybody know how to map the generic value ERP with the correct value MQAS200A instead of MSVL200A?
Thanks in advance,
Regards,
Andrea Ricci

Hi,
You cannot generalize the Logical system name, for the workaround you need to put the logical system for quality and transport it to quality and it should work and to check in dev you need to again change the log. sys to dev and save it but dont transport it. Similarly you can do for production system.
Regards,
Shobhit

Transaction Launcher to call custom transaction

Hi ,
I have a requirement where i need to call a custom transaction using transaction launcher. I am able to successfully launch the transaction. But i need to pass a value to the transaction.
For eg. If i am calling a custom report transaction which has a selection screen field 'FORMNAME' as a parameter i need to pass the name of the form to the transaction. I am not able to pass that value. Can any one help me onthis.
I have seen all the posts , but could not get any help on how to set the value for custom transaction. I can see how it is done for standard transaction.
Regards
Ansari

Hi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

Parameter passing (CRM to R3) for BOR based transaction launcher

Hi All,
Our requirement is to create R3 sales order through IC webclient. The details of the business partner should be shown as the defaults in the R3 sales order creation screen.
To achieve this we:
1. Created link in Navigation Profile
2. Created transaction launcher profile (using the above created navigation link) and transaction launcher type is BOR based.
3. Transaction parameters (in the handler class method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW) are set to the business partner.
When we launch the VA01 transaction through IC webclient, we are able to see the Sales order initial screen.
We are facing the following problems.
1. We could not skip the initial screen in the VA01 transaction.
2. The transaction parameters are not passed to the R3 Sales order creation transaction. While debugging, we could see that the business partner number is correctly assigned to the transaction parameter but this value is not sent to the R3 system.
Are we missing something for passing the parameters from CRM system to R3?
Please help.
Points will be awarded.
Thanks,
Chan

Hi Chan
Don't know if this question has been answered yet, but have a look at this document: [http://www.consnet.co.za/documents/R3OrderIntegration.pdf]
This document is for WinClient Integration, but you can create your IC WebClient launch transaction for the BOR Object easily enough.
There may be more elegant ways of doing the above, such as doing everything R/3 on BUS2032 and using delegation of the BOR Object, but this document is the most detailed explanation I have.
Regards
Johan
Edited by: Johan Van Zijl on Jan 15, 2008 6:25 AM - I have fixed the link to the file

Transaction launcher - URL transaction and parameter

Dear Experts,
I need to pass the confirmed BP's address as a parameter to an URL transaction. How would I achieve this? My URL is http://maps.google.com
Thanks & Regards,
Kanthimathi

Hi,
We faced a similar situation. You can pass parameters to an external website in the query string. But you cannot do that with the classic transaction launcher config.
You would need to write javascript code to achieve this on the 'confirm' button event handler code.
Hope it helps!
Thanks,
Sudipta.

Open ERP transaction within CRM 2007 using wizard for transaction launcher

Hello everybody,
I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
Any help is highly appreciated.
Thanks lot and kind regards,
Franziska

Hi,
The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
Remember, for sucessfull transaction Launcher Configurations,
1) The client in which WEB UI Runs
2) The Logical System mapping and client mentioned in ITS url
3) The client is which you created the BOR object.
4) The client on which you are configuring transaction launcher wizard
ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
For example,
If my WEB UI is on client 200 of development system,
then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
Hope this helps.
Thanks & Regards,
Suchita

CRM - Transaction Launcher

Hi Guys,
I'm trying to configure transaction launcher for transaction VA11 (ZDD_VA11).. I've done all the necessary settings but when I try to test it via Web client, it gives following error..
Error:-
Detail transaction ZDD_VA11 not defined.
Detail Launch transction not defined.
Execution not possible; error in launch transaction.
Is there a report that needs to be run to convert the logical system correctly for the mapped logical system on the transaction launcher method? What is that report or program and how do I run that to over come that problem...
Thanks,
KP.

Hi Gurus
I am trying to configure URL on WEB UI thru transaction launcher in SAP CRM.
I am getting the following errors
Error within a launch transaction
Launch transaction handler does not exist
Launch transaction ZWEBPAGE not defined
Launch transaction not defined
Could please let me know where I went wrong .
Thank you
HK

Dynamic Determination of Logical System- Transaction Launcher

Hi Friends,
Need your suggestions and inputs on how to dynamically determine the logical system for the transaction launcher.
Our system landscape is like this.
We have one CRM connected to mulitple back end ECC Boxes. Currently, we have created separate TL's fo VA01 ( One each for each back end application ) and provided the same in logical link and controlled the same via business role.
For eg: BROLE1 - LLINK1 having (TL VA01) pointing to ECC System1
BROLE2 - LLINK2 having (TL VA01) pointing to ECC System2
BROLE3 - LLINK3 having (TL VA01) pointing to ECC System3
The above procedure is working fine. But what we are trying to do is, when the end user clicks on the TL link in WEB UI, Based on the assigned business role, it should dynamically determine the back end system and open the VA01 Screen in that system.
I have activated indicator multiple systems in the customizing of mapped logical systems.
In debugging mode, i have tried changing the LOGSYS value @ run time in the handler class.
Any pointers on this would be of great help.
Thanks,
Madhu

Hi,
Try this..
To maintain RFC destination in each business role, there is one functional profile "ERP_SALES_ORDER" where in you can maintain respective rfc destination.
Create z-functional profile's for "ERP_SALES_ORDER" and maintain corresponding rfc destination, later assign these erp sales order function profiles in respective business roles trxn (CRMC_UI_PROFILE).
you can use the below statement to fetch rfc destination whcih assigned to business role via functional profile.
If gv_rfc is INITIAL.
gv_rfc = CL_CRM_IC_ERP_SERVICE=>GS_ERPPROF-RFCDEST.
ENDIF.
Hope this helps.
Cheers,
Sumit Mittal

How to call external application (transaction launcher) from event method

Hi all
Can somebody tell me which program lines to put into an event handler method in a view controller to get an external application called. I intend to define the link to the external application in the Transaction Launcher. But I cannot find any instructions on how to call the Transaction Launcher from my event handler method. I do not want to launch the application from the navigation bar, ONLY via a link in a list of invoices in a table view, and I want to press the invoice number to get an external application called to display the invoice. My event handler method gets called fine enough, but I have no clue which program lines to put into the method to pass on the call to the Transaction Launcher
Best regards
Arne Thage / MarchIT / Denmark

hi,
check class CL_CRM_UI_LTX_NAVBAR_PARAM.
call method : CREATE_PARAMETER_OBJECT with parameters
IV_LINK_ID     Importing     Type     CRMT_UI_LOGICAL_LINK_ID                                                                                Logical Link ID
IV_PARAMETER     Importing     Type     CRMT_UI_LINK_PARAMETER                                                                                Link Parameter
RV_RESULT     Returning     Type Ref To     IF_BOL_BO_PROPERTY_ACCESS                                                                                BO Attribute
I think it should work but have never done myself.
Best Regards
Pankaj Kumar

Transaction Launcher - transport handler clas

Similar Messages

Maybe you are looking for