Transaction MASS
Hello everyone
Recently I found the transaction MASS, I will use it to update the pricing date of several Sales orders, I made a test on a Test environment, but the final log shows me several messages like this:
Sales document 10190721 was not changed
Error in VBAPKOM 000010
The material in item 000010 cannot be changed
Does anyone know the prerequisites or which sales order could be updated and which other not?
Thank you in advance
Regards.
hi,
i have tested the same MASS t.code.
by selecting header data and tried to change the same pricing date. it has said
0000000001 : VBAKKOM has been processed successfully
but when i went to the sales order the date is not changed in the Pricing date of sales order header.
here in MASS there are three options :
Sales order header data
Sales Order Item Data
SD document: Business item data
which one have you selected and processed
regards,
balajia
Similar Messages
-
HOW TO Create variants for transaction MASS on LFA1 object?
hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PMHi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank. -
Hello, i'm trying to update req type in sales order item data in transaction MASS (field Bedae). Once I save the doc I get following error messages: sales document was not changed error in VBAPKOM 00010 Requirement type doesn't exist. Also, VBAKKOM has been processed successfully. Please advise Thank you
Hello Saila,
Please let us know how you resolved the issue??
As per what I understand is there were subsequent documents (delivery) created for that particular sales order hence system was unable to update the requirement type in it.
Regards
Naveen K. -
Reason for rejection not changed in transaction MASS
Hi everybody,
I'm trying to update a sales order item with a reason for rejection (field VBAP-ABGRU) in transaction MASS but it doesn't work. I took a look in SAP notes and found similar problems but these notes (specially note 390105) don't apply to our version (4.7 support package 22). Before opening a note in SAP I would like to have someone's opinion about the issue.
Thanks,
PauloPaul, it doesn't work because the field is not updated despite success message issued when the transaction is finished (I tried to change the field content from blank to other value). The field is available in transaction MASS and I have successfully tested it in another system (release 6.00). But now I found a note (regarding to the same problem in another field - MASSSDPOSVBKD-KURRF) that can be helpful. It's note 777746 and it applies to our release. So, I'm waiting for the basis team to implement it to see what happens.
Thank you,
Paulo -
Create a Business Object and add to transaction MASS
Hi folks, I would like to know if it's possible to create a business object for 2 tables and use this with standard transaction MASS for mass maintenance.
I want to use transaction MASS for mass maintenance on the foreign trade data, 2 table will be available eikp and eipo. I think I will have to create a business object, first it is possible and how will I setup all this,
thanksHi,
Check this link.
http://www.erpgenie.com/abap/bapi/example.htm
aRs -
Needed insight into transaction MASS
Hi Experts,
I needed to learn about the transaction MASS in detail. I have gone through the threads but they answer very specific questions and scenarios.
I would be grateful if you could share some documentation on the transaction.
Warm Regards,
SomilThe name of this TCode itself is self explanatory.
When you want to update any data in bulk, you can do so via MASS. Fore more information, check this link
[Mass Maintenance processing - tcode MASS |http://www.sap123.com/showthread.php?t=158]
thanks
G. Lakshmipathi -
Hello Everyone,
There is a place in transaction MASS to add a custom formula that requires ABAP. So we need to look into how we could do this with a formula
(Edit -> Enter Formulas).
I don't know how this functionality works, can anyone help me with this?
Thanks!
ArvinHere is a sample from SAPWIKI
X is the value you must return
form GET_NEW_MAKT_MAKTX using segment structure MAKT changing X.
data: mytext(40) type c,
mylength type i.
mylength = strlen( X ).
if mylength > 38.
replace ' ' with ' ' into X.
endif.
overlay mytext with X.
write 'L' to mytext+39.
X = mytext.
endform.
<a href="http://sapwiki.iwoars.net/index.php/MASS">http://sapwiki.iwoars.net/index.php/MASS</a> -
Delete Variants for Transaction MASS
Is it possible to delete multiple variants for transaction MASS?
I am aware variants can be deleted one by one using Goto... Variants... Delete. However, I would like to delete over 200 variants which are no longer required.
Surely there is a standard function? Deleting hundreds of variants one at a time is not an option. Contracting an ABAP programmer is not an option.
Thanks for your advice.Hi G. Lakshmipathi,
Your suggestion to use BDC recording worked like a charm.
However, I am still surprised that there is no standard function.
Thanks for your help.
Regards,
Nathan -
Difference between AFS transaction J4AM and transaction MASS
hi,
i have heard abt MASS..but never tried it.
but i have worked with /AFS/MDC...
any idea what is the difference between the two and when is MASS actually used ?
thnks
Edited by: sdnuser1 sdnsurname on Feb 8, 2010 10:05 PMHI
both the transactions are the same which is for the mass maintenance or mass data change of sales documents, the report program for both of these tarnsactions are the same which is /AFS/RVMDCD.
REGARDS
VIGNESH. -
End User Transaction for Mass Change Sales Orders
Hello,
Transaction MASS can be used to change sales orders using object type BUS2032, however, end users are not allowed access to MASS.
In most other cases, the object types can be accessed by individual transactions, for example, MEMASSPO for BUS2012 and XD99 for KNA1.
But I cannot seem to find a similar transaction for object type BUS2032, does anyone know whether one exists or how to create such a shortcut.
Thanks,
Jake.Hi
See SAP Note 483303 - BUS2032: Only sales orders of category VBAK-VBTYP = 'C'
Regards
Eduardo -
Transaction code MASS and delta to BW / BI 7.0
Hi all,
in our BI landscape master data changes in the OLTP system will be performed with transaction MASS.
Do you know, if the changes will be done in such a way, that a "delta" for extraction to BW is recorded? Do you need to consider any special prerequisites regarding generation of a "delta" when using Tcode MASS?
Unfortunately, I am not very familiar with TCode MASS and only know the general principle of it.
Any feedback is highly appreciated!
Thanks and best regards,
PhilippHi,
check this link
http://www.bluefinsolutions.com/images/stories/knowledge/mass%20maintenance%20article%20msc.pdf
i hope u will get the clear usage of tCode MASS
regards,
shikha -
Mass transaction :Unable to modify purchase order
Hello. i wish to assign a contract number and item to my line item in my PO through the transaction MASS. It is not modifying the PO. the object type is BUS2012. I have tried it in another environment and it works. Is there any customising related to it?
hi,
mass transaction is depends up on different scenorios .. better use LSMW or BDC to change the data . -
Mass-change in scheduling agreement
Hi Gurus,
today I wanted to do a mass change in scheduling agreements using transaction MASS.
Unfortunately, it seems not to be possible to change these agreements with MASS. I found SAP Note # 483303 which tells us that MASS is only able to change documents with VBAK-VBTYP = 'C'.
The scheduling agreements use VBAK-VBTYP = 'E' or VBAK-VBTYP = 'F'.
Does anyone have a workaround for this? In the meantime I'll set up a LSMW, this should work fine.
Thanks
RalfYes you are correct, you can't use MASS to update scheduling agreements. As you mentioned, use LSMW or you can try using SCAT/BDC to update the documents.
Regards, -
Restrict change authorization for MM17 (Material master mass maintenance)
Hi,
Apologies if I have posted this in the wrong forum. I want to know if it is possible to use the mass maintenance transaction MM17 (indus. material) to display data only istead of change/create. Is there some setting at the basis object level which can enable this? There are currently a lot of custom abap reports and queries in our system for viewing material master data, these can all be replaced by MM17. Basically we want to use MM17 as a reporting tool to display data only. Is a solution possible? Help is appreciated, thanks.
RegardsHave you tried the MM Information System node in the SAP Easy Access menu? There are a bunch of standard reports with navigation options there, for the user who has the correct authorization to display only.
Alternately, you may want to take a look into transaction MASS and use the B_MASSMAIN object, depending on your requirements - but test it well.
Cheers,
Julius -
Urgent--==creation of object type in MASSOBJ transaction
hi all:
Could any one urgently tell me how to create object type in Massobj transaction.(this is done to delete purchase requisition in bulk in transaction 'Mass' (AND not in 'MASSOBJ').)
i have created in Massobj transaction by pressing 'new enteries' button, but several elements are missing.
so it give short dump after running transaction Mass.
Object type is created in Massobj transaction and executed in Mass transaction.
could anyone find solution for this urgetly.
thanx in advance
regards
rajHi,
There is an standard object BUS2105 to for the mass maintanance purpose.
You can directly go to MASS transaction and give the object type BUS2105 at the intial selection screen and don't mention any variant name.Execute it and displays the next screeen whereas you have the option to select the field you want and execute it again.Go to the next screen and specify the PR number range and specify the new value for the mass maintanace.After that you got to select the push button 'Carry out a mass change'.
I hope this would help you.
Thank you.
Regards,
karun.M
Maybe you are looking for
-
So today i went to update my ipod, then it goes to this black screen the shows that i need to plug it into itunes. when i go to do so itunes doesnt pick it up and i cant get off this screen that says to plug it into itunes. i dont care if i dont get
-
Sysprep Error with windows 8.1
I am Trying to sysprep my WIndows 8.1 enterprise (MSDN) and i get the following errors 2013-01-18 11:12:22, Info SYSPRP ======================================================== 2013-01-18 11:12:22, Info SYSPRP === Beginning of a new sysprep run ===
-
Also was unable tom type in the post subject area, just the title. do I need a Bluetooth keyboard for this? I was hoping to use my iPad to blog while traveling. Frustrating.
-
The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?
-
ITunes says that my iPhone 4S is an iPhone 4
Hi, I have a problem with my iPhone 4S, I make a clean restore to iOS 6.1.2 and now iTunes says that it´s and iPhone 4, I try to restore a few times more and it continues equal. I also try with other Macs and iTunes continue saying that it´s an iPhon