Transaction SOLMAN_SET does not exist

Hi All,
I have installed SMD agent in one if the R/3 System's and trying to configure that managed system in
solution manager .As per the document we need to configure managed system from transaction
SOLMAN_SETUP.
But the txn SOLMAN_SETUP does not exist in our System.Please help me how to get this transaction
in our system or is there any other way to configure managed sysyem .
Please find the patch levels below....
SAP_ABA     700                     0016
SAP_BASIS     700     0016
PI_BASIS     2005_1_700     0016
ST-PI     2005_1_700     0006
SAP_BW     700                     0018
SAP_AP     700                     0014
BBPCRM     500                     0012
ST     400                     0017
CPRXRPM     400                     0013     SAPK-40013INCPRXRPM
BI_CONT     703                     0013     SAPKIBIIQ3
ST-ETP     100                     0000          -
ST-A/PI     01K_CRM560     0000          -
ST-SER     700_2008_1     0005     SAPKITLOO5
ST-ICO     150_700                     0016     SAPK-1507GINSTPL
Please help me in this...
Thanks,
Srikanth.

follow this path
SPRO->sap solution manager->configuration->basic settings->wizard based initial configuration of basic settings.
There are 2 parts under this solution manager and satellite system..perform one by one for both.
Please do all the steps under that and you can click the help node next to each task for help or documentation.
Hope it helps.
Regards
Prakhar
Edited by: Prakhar Saxena on Apr 28, 2009 12:42 PM

Similar Messages

Command $TAB : message Transaction $TAB does not exist Message no. S#343

when i use the command $TAB to refresh the buffers the system gives me the message
" Transaction $TAB does not exist
Message no. S#343 "
In some systems it works as intended. How can i correct that position.

try /$TAB

Transaction type does not exist. Check entries

Hello all,
EBP 5.0, CCM 1.0, unicode
When I try to log on different language than English and try to shop system is displaying two messages
Internal number range is missing for transaction type. Inform syst. admin
Transaction type does not exist. Check entries
And I cannot see link for Procurement Catalog.
All my customizing up to now was in English, due to the fact that SAP did not provide translation to Croatian (Latin-2 language).
Also catalog call-up has locale "en" for the calling of catalog from EBP.
Please give hint where I can start with debugging.
Gordan

Hello Yann,
main problem, language files for CCM and EBP are not suppied from SAP yet. MY BC told me that they installed Croatian language in WAS, so system should behave as language is intalled fully and represent text in English when there is no translation.
I cannot test other things because EBP will not go into the catalog due to the missing internal numbering for the transaction type. I checked BUS2121 in transaction types but nothing to be found.
I was thinking that those two problems are related but this is not true. First I have to solve number range that check the catalog. Only common between those two problems is logon language.
I even forced our special characters by entering them as UNICODE code and I can see them via catalog manager in english, but only for catalog items. Characteristics and product category names do not follow UNICODE specification.
Confused
Gordan

Transaction type does not exist

While creating PR & PO for the Assets I am getting Following Error
Transaction type does not exist
Message no. AA_BAS_CUS_READ008
Diagnosis
The transaction type entered does not exist.
System Response
Processing is terminated.
Procedure
Check your entry.
Can any body please help me to make PR & PO.
Amit

Hello Amit,
Please verify also the APC account you have set in the account determination of the relevant asset class (the one to which belongs the asset in the PO).
Then kindly check the field status group assigned to this account in FS00.
Please make sure that the fields for asset main and subnumber are enable in the field status group definition and not suppressed.
In other customers this was the reason for such an error.
This should resolve your problem.
Best Regards,
Vanessa.

NWM 7.1: Transaction SDOE_META_MON does not exist

This is a question regarding NetWeaver Mobile 7.1
In the training class RNM71 solutions, after initially loading the data of the data object CUSTOMER from the backend with transaction SDOE_LOAD, I am supposed to check the progress with transaction SDOE_META_MON but I get the error that this transaction does not exist.
Any idea?
Instead I went through SDOE_WB to go to the data object and checked the contents of the underlying table, which showed that the backend load worked, but this is not what the solution suggests.
Cheers, Andre

Thanks Siva,
I am glad I am not the only one. I will notify the class trainers.
Cheers, Andre
(points assigend )

Delete exposure in THMEX and FTREX12 - error "Transaction does not exist"

I have transferred by error an exposure (using TFREX12) to HM. In THMEX I have deleted the newly created exposure that has a transaction Nber. Then in TFREX12 I try to reverse this transfer by using in the menu Position the function "Reverse transfer" but get an error message "Transaction xxx does not exist". How can it be deleted so that I can transfer the exposure to the appropriate Hedge Plan??
Thanks
G.

Hi,
correct procedure is to reverse transfer in FTREX12 without deleting the exposure in THMEX. If you deleted it in THMEX first, then the error is justified. To solve the problem, you can manually create an exposure with the same transaction directly in THMEX, then transfer reversal should be possible.
Rgds,
Tomislav

Report painter report does not exist after applying support pack

Hi,
I have created report with the help of report painter for FI.
Also created transaction code for the same.
After applying the support pack, while testing I got the error that
program in the transaction code does not exists.
How to search that program and where or I need to create the same program again?
Thanx in advance.
-Umesh

The reason could be having (1) invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
Either way, go to t-code GRR2 to change the report.
In the report row or column, is there an Element (the labels in red color) that does not make sense?
It could still have the correct label names, but double-click and go into "Record Types (from your error message)". Be sure to have the correctly define values attached to each Characteristics.
If all above seems okay, try (From top bar, select) Edit --> General Data Section. Think of this section as the "header data" of the report.
Good luck
AY

Transaction Type is 922 does not exist

Hi,
While posting FI document I am getting below error message :
Error: Enter another transaction type (Transaction type 922 does not exist)
Message no. AA816
Diagnosis:
According to your entry or specification, you want to use transaction type 922. However, this transaction type has not been defined.
Procedure:
Check the if transaction type 922 is defined in FI-AA Customizing
Please advise how can I rectify this issue!
Regards
VS Rao

Hi VS Rao
Seems you used TT.922 in T-cd: OAYT but somehow you deleted TT.922 afterwards. You can either delete the setting of TT.922 from T-cd: OAYT or simply redefine the TT.922 accordingly if any necessary.
Best regards
George

How to handle "The specified resource does not exist" exception while using entity group transactions to purge WADLogs table

Hi,
We have a requirement to purge the Azure WADLogs table on a periodic basis. We are achieving this by using Entity group transactions to delete the
records older than 15 days. The logic is like this.
bool recordDoesNotExistExceptionOccured = false;
CloudTable wadLogsTable = tableClient.GetTableReference(WADLogsTableName);
partitionKey = "0" + DateTime.UtcNow.AddDays(noOfDays).Ticks;
TableQuery<WadLogsEntity> buildQuery = new TableQuery<WadLogsEntity>().Where(
TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.LessThanOrEqual, partitionKey));
while (!recordDoesNotExistExceptionOccured)
IEnumerable<WadLogsEntity> result = wadLogsTable.ExecuteQuery(buildQuery).Take(1000);
//// Batch entity delete.
if (result != null && result.Count() > 0)
Dictionary<string, TableBatchOperation> batches = new Dictionary<string, TableBatchOperation>();
foreach (var entity in result)
TableOperation tableOperation = TableOperation.Delete(entity);
if (!batches.ContainsKey(entity.PartitionKey))
batches.Add(entity.PartitionKey, new TableBatchOperation());
// A Batch Operation allows a maximum 100 entities in the batch which must share the same PartitionKey.
if (batches[entity.PartitionKey].Count < 100)
batches[entity.PartitionKey].Add(tableOperation);
// Execute batches.
foreach (var batch in batches.Values)
try
await wadLogsTable.ExecuteBatchAsync(batch);
catch (Exception exception)
// Log exception here.
// Set flag.
if (exception.Message.Contains(ResourceDoesNotExist))
recordDoesNotExistExceptionOccured = true;
break;
else
break;
My questions are:
Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
Would this logic fail in any particular case?
How would this approach change if this code is in a worker which has multiple instances deployed?
I have come up with this code by referencing the solution given
here by Keith Murray.

Hi Nikhil,
Thanks for your posting!
I tested your and Keith's code on my side, every thing worked fine. And when result is null or "result.count()<0", the While() loop is break. I found you code had some logic to handle the error "ResourceDoesNotExist" .
It seems that the code worked fine. If you always occurred this error, I suggest you could debug your code and find which line of code throw the exception.
>> Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Base on my experience, we could use code (like the above logic code) and using the third party tool to delete the entities manually. In my opinion, I think the code is every efficient, it could be auto-run and save our workload.
>>Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
In you code, you used the "recordDoesNotExistExceptionOccured " as a flag to check whether the entity is null. It is a good choice. I had tried to deleted the log table entities, but I used the flag to check the result number.
For example, I planed the query result count is 100, if the number is lower than 100, I will set the flag as false, and break the while loop.
>>Would this logic fail in any particular case?
I think it shouldn't fail. But if the result is "0", your while loop will always run. It will never stop. I think you could add "recordDoesNotExistExceptionOccured
= true;" into your "else" block.
>>How would this approach change if this code is in a worker which has multiple instances deployed?
You don't change anything expect the "else" block. It would work fine on the worker role.
If any question about this issue, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot drop the table because it does not exist in the system catalog. Transaction context in use by another session

Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil Kumar

Hi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
   CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
   ELSE ''Current Account Balance Inquiry''
   END
  END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar

ST06N transaction does not exist

Hi
We have upgraded the SAP NetWeaver 2004s support package stack level from 23 to 26, after that when we are executing the transaction ST06N - we are getting error message below the screen "ST06N transaction does not exist"
for that the program name we can able to execute in T code SA38 Program name RSHOST1N
thru the T code its showing the Message ST06N transaction does not exist,
Could pls guide us
Regards
Sriram

Hi Rupali
Thanks for your support as per your advice we can do that with help of Abaper
As of now we have upgraded the Support package 26 in Dev & QA. in the Production still i can able to execute the T code ST06N, My query's are Is this any bug or ST06N Tcode obsolete?
is this any one face the same issue ?
Regards
Sriram

Intercompany transaction does not exists

Hi,
I am have posted entry in F-02 and also i have asigned a new company code to the transaction and also document got created.
now i need to reverse the document for the reversal reason 1 in T.Code FBU8.
I am getting error message " Intercompany Transaction does not exists".
Please help me with this issue.

dear
check settings in OBYA. is clearing account configured for intercompany postings
and check that in OBA7 for the document type you using allow intercompany postings.
regards
rohit
Edited by: ROHITBALI on Nov 19, 2011 7:28 AM

Transaction Sourcing - " Screen does not exist"

Hello all,
I tried to call the "transaction BBPSOCO01" or "Carry Out Sourcing" then i am getting the following message
"The following error text was processed in the system SR2 : Dynpro does not exist
The error occurred on the application server cs-ebp_SR2_08 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Module: PREPARE_WORKLIST_WEB_TRANSPORT of program SAPLBBP_SOCO_UI_ITS "
Right now i am working on SRM 5.0 sp 6.
I have seen similar problem in SRM4.0 sp 5 and the relevent note is 632982.
Is there any note exists for SRM 5.0 sp 6 or any other way to solve this problem.
with regards,
mahesh

Hi Mahesh,
AM expericiencing the same problem. I've followed teh instraction in note 632982 but am not winning. Because the the system attempted to use dynpro 0301 in program "SAPLBBP_SOCO_UI_ITS". Which i've deleted as per note above.
How can i take out this dynpro from the include?
Rgs,
Maggie

Dump error: Dynpro does not exist while in transaction me31K

HI,
I am getting dump while creating the Contract in ME31K.
hort text
   Dynpro does not exist
hat happened?
   Error in the ABAP Application Program
   The current ABAP program "SAPLXM06" had to be terminated because it has
   come across a statement that unfortunately cannot be executed.
rror analysis
   The system attempted to use dynpro 0201 in program "SAPLXM06".
   This dynpro does not exist.
rigger Location of Runtime Error
   Program                                 SAPLXM06
   Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
   Row                                     10
   Module type                             (FUNCTION)
   Module Name                             EXIT_SAPLEINM_013

Hello,
use transaction SMOD to check SAP enhancement MM06E005 in your system. Screen SAPLXM06 0201 is the contract header subscreen. The system report it missing because the enhancement MM06E005 (Customer fields in purchasing document) was activated in your system, but not implemented. So either disable/delete the enhancement or create a subscreen.
regards,
J.N.N.

HTTP destination IED_100 does not exist (system , transaction SM59)

Hi guys,
When I try to send a xml file to WAS using ABAP Proxy I receive this error message: "HTTP destination IED_100 does not exist (system , transaction SM59)".
I did a test connection in sm59 for http connections/R/3 systems and the messagem bellow is ICM_HTTP_CONNECTION_FAILDED.
What could be wrong?
Thanks in advance,
Ricardo

Hi Sridhar,
Im trying connecting XI to WAS 6.40 using ABAP Proxy.
Now I receive this error message: <SAP:Code area="INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as Integration Engine</SAP:Stack>
I have defined my business system IED_100 (WAS 6.40) like application system and the related integration server is XI. Its correct?
When I check the component monitoring > Integration Engines > Proxy runtime IED_100, this message is displayed:
Unable to log on to system IED_100 in language en with user XIRWBUSER. But in WAS system (IED_100) I dont have a user XIRWBUSER!!! I need to create it?
Tell me if Im correct: I dont need any RFC adapter; Im only need an XI adapter (http) to send the xml file to ABAP proxy (IED_100) and on IED_100 I need to activate XI message format service in SICF and create a RFC connection in SM59 to call XI integration server. This is already done!
In sm59 I continue with ICM_HTTP_CONNECTION_FAILED
Thanks in advance,
Ricardo.

Transaction SOLMAN_SET does not exist

Similar Messages

Maybe you are looking for